Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments
Tóm tắt
Từ khóa
Tài liệu tham khảo
Zhu, 2018, Wear performance of metal parts fabricated by selective laser melting: a literature review, J Zhejiang Univ Sci A, 19, 95, 10.1631/jzus.A1700328
Niinomi, 2008, Mechanical biocompatibilities of titanium alloys for biomedical applications, J Mech Behav Biomed Mater, 1, 30, 10.1016/j.jmbbm.2007.07.001
Geetha, 2009, Ti based biomaterials, the ultimate choice for orthopaedic implants - A review, Prog Mater Sci, 54, 397, 10.1016/j.pmatsci.2008.06.004
Harun, 2018, A review of powder additive manufacturing processes for metallic biomaterials, Powder Technol, 327, 128, 10.1016/j.powtec.2017.12.058
Yang, 2017
Gupta, 2020, Impact of layer rotation on micro-structure, grain size, surface integrity and mechanical behaviour of SLM Al-Si-10Mg alloy, J Mater Res Technol, 9, 9506, 10.1016/j.jmrt.2020.06.090
Khanna, 2019, Investigations on density and surface roughness characteristics during selective laser sintering of Invar-36 alloy, Mater Res Express
Waqar, 2020, Effect of post-heat treatment cooling on microstructure and mechanical properties of selective laser melting manufactured austenitic 316L stainless steel, Rapid Prototyp J, 10.1108/RPJ-12-2019-0320
Froes, 2014, The additive manufacturing (AM) of titanium alloys, Adv. Mater. Res., 1019, 19, 10.4028/www.scientific.net/AMR.1019.19
Santos, 2006, Rapid manufacturing of metal components by laser forming, Int J Mach Tools Manuf, 46, 1459, 10.1016/j.ijmachtools.2005.09.005
Murr, 2012, Metal fabrication by additive manufacturing using laser and Electron beam melting technologies, J Mater Sci Technol, 28, 1, 10.1016/S1005-0302(12)60016-4
Gibson, 2010, Design for additive manufacturing, 299
Cao, 2018, A review of the fatigue properties of additively manufactured Ti-6Al-4V, JOM, 70, 349, 10.1007/s11837-017-2728-5
Toptan, 2019, Corrosion and tribocorrosion behaviour of Ti6Al4V produced by selective laser melting and hot pressing in comparison with the commercial alloy, J Mater Process Technol, 266, 239, 10.1016/j.jmatprotec.2018.11.008
Frazier, 2014, Metal additive manufacturing: a review, J Mater Eng Perform, 23, 1917, 10.1007/s11665-014-0958-z
Wang, 2016, Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review, Biomaterials, 83, 127, 10.1016/j.biomaterials.2016.01.012
Shipley, 2018, Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: a review, Int J Mach Tools Manuf, 128, 1, 10.1016/j.ijmachtools.2018.01.003
DebRoy, 2018, Additive manufacturing of metallic components–process, structure and properties, Prog Mater Sci, 92, 112, 10.1016/j.pmatsci.2017.10.001
Murr, 2009, Microstructure and mechanical behavior of Ti–6Al–4V produced by rapid-layer manufacturing, for biomedical applications, J Mech Behav Biomed Mater, 2, 20, 10.1016/j.jmbbm.2008.05.004
King, 2015, Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges, Appl Phys Rev, 2, 41304, 10.1063/1.4937809
Collins, 2016, Microstructural control of additively manufactured metallic materials, Annu Rev Mater Res, 46, 63, 10.1146/annurev-matsci-070115-031816
Hao, 2016, Biomedical titanium alloys and their additive manufacturing, Rare Met Mater Eng, 35, 661, 10.1007/s12598-016-0793-5
Lewandowski, 2016, Metal additive manufacturing: a review of mechanical properties, Annu Rev Mater Res, 46, 151, 10.1146/annurev-matsci-070115-032024
Sames, 2016, The metallurgy and processing science of metal additive manufacturing, Int Mater Rev, 61, 315, 10.1080/09506608.2015.1116649
Tong, 2017, Mechanical properties of titanium-based Ti–6Al–4V alloys manufactured by powder bed additive manufacture, Mater Sci Technol, 33, 138, 10.1080/02670836.2016.1172787
Zhang, 2018, Additive manufacturing of metallic materials: a review, J Mater Eng Perform, 27, 1, 10.1007/s11665-017-2747-y
Gorsse, 2017, Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys, Sci Technol Adv Mater, 18, 584, 10.1080/14686996.2017.1361305
Trevisan, 2018, Additive manufacturing of titanium alloys in the biomedical field: processes, properties and applications, J Appl Biomater Funct Mater, 16, 57
Harun, 2018, A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications, Powder Technol, 331, 74, 10.1016/j.powtec.2018.03.010
Romero, 2018, Fatigue and fracture properties of Ti alloys from powder-based processes–a review, Int J Fatigue, 117, 407, 10.1016/j.ijfatigue.2018.08.029
Majumdar, 2018, Additive manufacturing of titanium alloys for orthopedic applications: a materials science viewpoint, Adv Eng Mater, 20, 10.1002/adem.201800172
Agius, 2018, A review of the as-built SLM Ti-6Al-4V mechanical properties towards achieving fatigue resistant designs, Metals (Basel), 8, 10.3390/met8010075
Bartlett, 2019, An overview of residual stresses in metal powder bed fusion, Addit Manuf, 27, 131
Fatemi, 2019, Fatigue behaviour of additive manufactured materials: an overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects, Fatigue Fract Eng Mater Struct, 42, 991, 10.1111/ffe.13000
Zhang, 2019, Recent progress in the simulation of microstructure evolution in titanium alloys, Prog Nat Sci Mater Int, 29, 295, 10.1016/j.pnsc.2019.05.006
Vastola, 2016, Modeling the microstructure evolution during additive manufacturing of Ti6Al4V: A comparison between electron beam melting and selective laser melting, JOM, 68, 1370, 10.1007/s11837-016-1890-5
Fu, 2014, Three-dimensional temperature gradient mechanism in selective laser melting of Ti-6Al-4V, J Manuf Sci Eng, 136, 10.1115/1.4028539
Gong, 2012, Effect of defects on fatigue tests of as-built Ti-6Al-4V parts fabricated by selective laser melting, 499
Guo, 2013, Additive manufacturing: technology, applications and research needs, Front Mech Eng China, 8, 215, 10.1007/s11465-013-0248-8
Bose, 2018, Additive manufacturing of biomaterials, Prog Mater Sci, 93, 45, 10.1016/j.pmatsci.2017.08.003
Benedetti, 2017, The effect of post-sintering treatments on the fatigue and biological behavior of Ti-6Al-4V ELI parts made by selective laser melting, J Mech Behav Biomed Mater, 71, 295, 10.1016/j.jmbbm.2017.03.024
Benedetti, 2018, Low- and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: mean stress and defect sensitivity, Int J Fatigue, 107, 96, 10.1016/j.ijfatigue.2017.10.021
Van Bael, 2012, The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds, Acta Biomater, 8, 2824, 10.1016/j.actbio.2012.04.001
Dhansay, 2014, Fatigue and fracture toughness of Ti-6Al-4V titanium alloy manufactured by selective laser melting, Adv. Mater. Res., 1019, 248, 10.4028/www.scientific.net/AMR.1019.248
Vandenbroucke, 2007, Selective laser melting of biocompatible metals for rapid manufacturing of medical parts, Rapid Prototyp J, 10.1108/13552540710776142
Thijs, 2010, A study of the microstructural evolution during selective laser melting of Ti-6Al-4V, Acta Mater, 58, 3303, 10.1016/j.actamat.2010.02.004
Vilaro, 2011, As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting, Metall Mater Trans A, 42, 3190, 10.1007/s11661-011-0731-y
Vrancken, 2012, Heat treatment of Ti6Al4V produced by selective laser melting : microstructure and mechanical properties, J Alloys Compd, 541, 177, 10.1016/j.jallcom.2012.07.022
Song, 2012, Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V, Mater Des, 35, 120, 10.1016/j.matdes.2011.09.051
Wycisk, 2013, High cycle fatigue (HCF) performance of Ti-6Al-4V alloy processed by selective laser melting, Adv. Mater. Res., 816, 134, 10.4028/www.scientific.net/AMR.816-817.134
Rafi, 2013, A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by selective laser melting, Int J Adv Manuf Technol, 69, 1299, 10.1007/s00170-013-5106-7
Liu, 2014, The effect of manufacturing defects on the fatigue behaviour of Ti-6Al-4V specimens fabricated using selective laser melting, Adv Mater Res, 891, 1519, 10.4028/www.scientific.net/AMR.891-892.1519
Edwards, 2014, Fatigue performance evaluation of selective laser melted Ti-6Al-4V, Mater Sci Eng A, 598, 327, 10.1016/j.msea.2014.01.041
Simonelli, 2014, Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V, Mater Sci Eng A, 616, 1, 10.1016/j.msea.2014.07.086
Xu, 2015, Additive manufacturing of strong and ductile Ti – 6Al – 4V by selective laser melting via in situ martensite decomposition, Acta Mater, 85, 74, 10.1016/j.actamat.2014.11.028
Uhlmann, 2015, Additive manufacturing of titanium alloy for aircraft components, Procedia CIRP, 35, 55, 10.1016/j.procir.2015.08.061
Kasperovich, 2015, Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting, J Mater Process Technol, 220, 202, 10.1016/j.jmatprotec.2015.01.025
Wu, 2016, Microstructural evolution and microhardness of a selective-laser-melted Ti-6Al-4V alloy after post heat treatments, J Alloys Compd, 672, 643, 10.1016/j.jallcom.2016.02.183
Wits, 2016, Porosity testing methods for the quality assessment of selective laser melted parts, CIRP Ann Manuf Technol, 65, 201, 10.1016/j.cirp.2016.04.054
Bartolomeu, 2016, Predictive models for physical and mechanical properties of Ti6Al4V produced by Selective Laser Melting, Mater Sci Eng A, 663, 181, 10.1016/j.msea.2016.03.113
Günther, 2017, Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime, Int J Fatigue, 94, 236, 10.1016/j.ijfatigue.2016.05.018
Ali, 2017, In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V, Mater Sci Eng A, 695, 211, 10.1016/j.msea.2017.04.033
Khorasani, 2017, On the role of different annealing heat treatments on mechanical properties and microstructure of selective laser melted and conventional wrought Ti-6Al-4V, Rapid Prototyp J, 23, 295, 10.1108/RPJ-02-2016-0022
Fatemi, 2017, Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect, Int J Fatigue, 100, 347, 10.1016/j.ijfatigue.2017.03.044
Walker, 2017, Evaluation of fatigue crack propagation behaviour in Ti-6Al-4V manufactured by selective laser melting, Int J Fatigue, 104, 302, 10.1016/j.ijfatigue.2017.07.014
Liu, 2019, Achieving Ti6Al4V alloys with both high strength and ductility via selective laser melting, Mater Sci Eng A, 766, 10.1016/j.msea.2019.138319
Tan, 2019, A thermo-metallurgical-mechanical model for selective laser melting of Ti6Al4V, Mater Des, 168, 10.1016/j.matdes.2019.107642
Pal, 2019, Tensile properties of selective laser melting products affected by building orientation and energy density, Mater Sci Eng A, 743, 637, 10.1016/j.msea.2018.11.130
Haubrich, 2019, vol. 167
Singh, 2020, Abrasive wear behavior of cryogenically treated boron steel (30MnCrB4) used for rotavator blades, Materials (Basel), 13, 436, 10.3390/ma13020436
Hu, 2020, The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures, Mater Des, 192, 10.1016/j.matdes.2020.108708
Pal, 2020, As-fabricated surface morphologies of Ti-6Al-4V samples fabricated by different laser processing parameters in selective laser melting, Addit Manuf, 33, 101147
Xiao, 2020, Study of residual stress in selective laser melting of Ti6Al4V, Mater Des, 193, 108846, 10.1016/j.matdes.2020.108846
Gorny, 2011, In situ characterization of the deformation and failure behavior of non-stochastic porous structures processed by selective laser melting, Mater Sci Eng A, 528, 7962, 10.1016/j.msea.2011.07.026
Sun, 2013, Mechanical properties of a Ti6Al4V porous structure produced by selective laser melting, Mater Des, 49, 545, 10.1016/j.matdes.2013.01.038
Yan, 2015, Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting, J Mech Behav Biomed Mater, 51, 61, 10.1016/j.jmbbm.2015.06.024
Arabnejad, 2016, High-strength porous biomaterials for bone replacement: a strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints, Acta Biomater, 30, 345, 10.1016/j.actbio.2015.10.048
Van Hooreweder, 2017, Improving the fatigue performance of porous metallic biomaterials produced by Selective Laser Melting, Acta Biomater, 47, 193, 10.1016/j.actbio.2016.10.005
Chen, 2017, Microstructure and mechanical properties of open-cell porous Ti-6Al-4V fabricated by selective laser melting, J Alloys Compd, 713, 248, 10.1016/j.jallcom.2017.04.190
Ran, 2018, Osteogenesis of 3D printed porous Ti6Al4V implants with different pore sizes, J Mech Behav Biomed Mater, 84, 1, 10.1016/j.jmbbm.2018.04.010
Dallago, 2018, Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting, J Mech Behav Biomed Mater, 78, 381, 10.1016/j.jmbbm.2017.11.044
Zhang, 2018, Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting, Mater Sci Eng A, 736, 288, 10.1016/j.msea.2018.08.084
Yan, 2019, Mechanical and in vitro study of an isotropic Ti6Al4V lattice structure fabricated using selective laser melting, J Alloys Compd, 782, 209, 10.1016/j.jallcom.2018.12.220
Bartolomeu, 2019, Implant surface design for improved implant stability – a study on Ti6Al4V dense and cellular structures produced by Selective Laser Melting, Tribol Int, 129, 272, 10.1016/j.triboint.2018.08.012
Dallago, 2019, On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting, Int J Fatigue, 124, 348, 10.1016/j.ijfatigue.2019.03.019
Salem, 2019, Influence of processing parameters on internal porosity and types of defects formed in Ti6Al4V lattice structure fabricated by selective laser melting, Mater Sci Eng A, 767, 138387, 10.1016/j.msea.2019.138387
Chen, 2019, 3D printed porous Ti6Al4V cage: effects of additive angle on surface properties and biocompatibility; bone ingrowth in Beagle tibia model, Mater Des, 175, 10.1016/j.matdes.2019.107824
Xiong, 2020, Rationally designed functionally graded porous Ti6Al4V scaffolds with high strength and toughness built via selective laser melting for load-bearing orthopedic applications, J Mech Behav Biomed Mater, 104, 10.1016/j.jmbbm.2020.103673
Bartolomeu, 2021, Selective Laser Melting of Ti6Al4V sub-millimetric cellular structures: prediction of dimensional deviations and mechanical performance, J Mech Behav Biomed Mater, 113, 104123, 10.1016/j.jmbbm.2020.104123
Yadroitsev, 2007, Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder, Appl Surf Sci, 254, 980, 10.1016/j.apsusc.2007.08.046
Kasperovich, 2016, Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting, Mater Des, 105, 160, 10.1016/j.matdes.2016.05.070
Gong, 2015, Influence of defects on mechanical properties of Ti-6Al-4V components produced by selective laser melting and electron beam melting, Mater Des, 86, 545, 10.1016/j.matdes.2015.07.147
Gong, 2014, Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes, Addit Manuf, 1, 87
Eskandari Sabzi, 2019, Powder bed fusion additive layer manufacturing of titanium alloys, Mater Sci Technol (U K), 35, 875, 10.1080/02670836.2019.1602974
Zhao, 2016, Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting, Mater Des, 95, 21, 10.1016/j.matdes.2015.12.135
Pogson, 2004, The direct metal laser remelting of copper and tool steel powders, Mater Sci Eng A, 386, 453, 10.1016/S0921-5093(04)01051-2
Tang, 2015, Additive manufacturing of a high niobium-containing titanium aluminide alloy by selective electron beam melting, Mater Sci Eng A, 636, 103, 10.1016/j.msea.2015.03.079
Brandl, 2012, Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM), Mater Sci Eng A, 532, 295, 10.1016/j.msea.2011.10.095
Zhai, 2016, Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM, Eng Fail Anal, 69, 3, 10.1016/j.engfailanal.2016.05.036
Taufik, 2013, Role of build orientation in layered manufacturing: a review, Int J Manuf Technol Manag, 27, 47, 10.1504/IJMTM.2013.058637
Van Belle, 2013, Investigation of residual stresses induced during the selective laser melting process, Key Eng Mater, 554, 1828, 10.4028/www.scientific.net/KEM.554-557.1828
Dunbar, 2016, Experimental in situ distortion and temperature measurements during the laser powder bed fusion additive manufacturing process. Part 1: development of experimental method, Addit Manuf
Leuders, 2013, On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance, Int J Fatigue, 48, 300, 10.1016/j.ijfatigue.2012.11.011
Han, 2017, Microstructure and mechanical property of selective laser melted Ti6Al4V dependence on laser energy density, Rapid Prototyp J, 10.1108/RPJ-12-2015-0193
Kruth, 2004, Selective laser melting of iron-based powder, J Mater Process Technol, 149, 616, 10.1016/j.jmatprotec.2003.11.051
Agarwala, 1995, Direct selective laser sintering of metals, Rapid Prototyp J
Rombouts, 2006, Fundamentals of selective laser melting of alloyed steel powders, CIRP Ann Manuf Technol, 55, 187, 10.1016/S0007-8506(07)60395-3
Attar, 2014, Manufacture by selective laser melting and mechanical behavior of commercially pure titanium, Mater Sci Eng A, 593, 170, 10.1016/j.msea.2013.11.038
Jaber, 2019, Selective laser melting of Ti alloys and hydroxyapatite for tissue engineering: progress and challenges, Mater Res Express, 6, 10.1088/2053-1591/ab1dee
Sochalski-Kolbus, 2015, Comparison of residual stresses in Inconel 718 simple parts made by electron beam melting and direct laser metal sintering, Metall Mater Trans A, 46, 1419, 10.1007/s11661-014-2722-2
Leuders, 2015, Fatigue strength prediction for titanium alloy TiAl6V4 manufactured by selective laser melting, Metall Mater Trans A Phys Metall Mater Sci, 46, 3816, 10.1007/s11661-015-2864-x
Leuders, 2014, On the fatigue properties of metals manufactured by selective laser melting–The role of ductility, J Mater Res, 29, 1911, 10.1557/jmr.2014.157
Razavi, 2018, Fatigue strength of blunt V-notched specimens produced by selective laser melting of Ti-6Al-4V, Theor Appl Fract Mech, 97, 376, 10.1016/j.tafmec.2017.06.021
Liang, 2019, The effect of heat treatment on microstructure evolution and tensile properties of selective laser melted Ti6Al4V alloy, J Alloys Compd, 782, 1041, 10.1016/j.jallcom.2018.12.051
Tsai, 2020, Heat-treatment effects on mechanical properties and microstructure evolution of Ti-6Al-4V alloy fabricated by laser powder bed fusion, J Alloys Compd, 816, 152615, 10.1016/j.jallcom.2019.152615
Singla, 2020, Impact of cryogenic treatment on HCF and FCP performance of β-Solution treated Ti-6Al-4V ELI biomaterial, Materials (Basel), 13, 500, 10.3390/ma13030500
Singla, 2019, Impact of cryogenic treatment on mechanical behavior and microstructure of Ti-6Al-4V ELI biomaterial, J Mater Eng Perform, 28, 5931, 10.1007/s11665-019-04338-y
Karami, 2020, Continuous and pulsed selective laser melting of Ti6Al4V lattice structures: effect of post-processing on microstructural anisotropy and fatigue behaviour, Addit Manuf, 36
Yu, 2019, Fatigue performances of selective laser melted Ti-6Al-4V alloy: influence of surface finishing, hot isostatic pressing and heat treatments, Int J Fatigue, 120, 175, 10.1016/j.ijfatigue.2018.11.019
Wauthle, 2015, Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures, Addit Manuf, 5, 77
Qiu, 2013, Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V, Mater Sci Eng A, 578, 230, 10.1016/j.msea.2013.04.099
Wycisk, 2015, Fatigue performance of laser additive manufactured Ti–6Al–4V in very high cycle fatigue regime up to 109 cycles, Front Mater, 2, 72, 10.3389/fmats.2015.00072
Chastand, 2016, Fatigue characterization of titanium Ti-6Al-4V samples produced by additive manufacturing, Procedia Struct Integr, 2, 3168, 10.1016/j.prostr.2016.06.395
Riemer, 2016, Crack propagation in additive manufactured materials and structures, Procedia Struct Integr, 2, 1229, 10.1016/j.prostr.2016.06.157
Kruth, 2007, Consolidation phenomena in laser and powder-bed based layered manufacturing, CIRP Ann Manuf Technol, 56, 730, 10.1016/j.cirp.2007.10.004
Hackel, 2018, Laser peening: a tool for additive manufacturing post-processing, Addit Manuf, 24, 67
Fotovvati, 2019, Fatigue performance of selective laser melted Ti6Al4V components: state of the art, Mater Res Express, 6
Li, 2016, Critical assessment of the fatigue performance of additively manufactured Ti-6Al-4V and perspective for future research, Int J Fatigue, 85, 130, 10.1016/j.ijfatigue.2015.12.003
Yan, 2018, Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting, J Alloys Compd, 764, 1056, 10.1016/j.jallcom.2018.06.076
Syed, 2019, An experimental study of residual stress and direction-dependence of fatigue crack growth behaviour in as-built and stress-relieved selective-laser-melted Ti6Al4V, Mater Sci Eng A, 755, 246, 10.1016/j.msea.2019.04.023
Zhang, 2017, The effects of ultrasonic nanocrystal surface modification on the fatigue performance of 3D-printed Ti64, Int J Fatigue, 103, 136, 10.1016/j.ijfatigue.2017.05.019
Yan, 2019, Fatigue strength improvement of selective laser melted Ti6Al4V using ultrasonic surface mechanical attrition, Mater Res Lett, 7, 327, 10.1080/21663831.2019.1609110
Tan, 2017, Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: a state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility, Mater Sci Eng C, 76, 1328, 10.1016/j.msec.2017.02.094
Zadpoor, 2017, Additive manufacturing of biomaterials, tissues, and organs, Ann Biomed Eng, 45, 1, 10.1007/s10439-016-1719-y
Kumar, 2016, Biocompatibility and mechanical behaviour of three-dimensional scaffolds for biomedical devices: process-structure-property paradigm, Int Mater Rev, 61, 20, 10.1080/09506608.2015.1128310
Wally, 2019, Selective laser melting processed Ti6Al4V lattices with graded porosities for dental applications, J Mech Behav Biomed Mater, 90, 20, 10.1016/j.jmbbm.2018.08.047
Chen, 2020, Influence of the pore size and porosity of selective laser melted Ti6Al4V ELI porous scaffold on cell proliferation, osteogenesis and bone ingrowth, Mater Sci Eng C, 106, 10.1016/j.msec.2019.110289
Wang, 2015, Review of the biocompatibility of micro-arc oxidation coated titanium alloys, Mater Des, 85, 640, 10.1016/j.matdes.2015.07.086
Xiu, 2016, Tailored surface treatment of 3D printed porous Ti6Al4V by microarc oxidation for enhanced osseointegration via optimized bone in-growth patterns and interlocked Bone/Implant interface, ACS Appl Mater Interfaces, 8, 17964, 10.1021/acsami.6b05893
Chen, 2019, Effect of polarization voltage on the surface componentization and biocompatibility of micro-arc oxidation modified selective laser melted Ti6Al4V, Mater Res Express, 6
Kao, 2018, Enhanced tribological, electrochemical, and biocompatibility properties of Ti6Al4V alloy through gas nitriding and CN coating deposition, J Mater Eng Perform, 27, 5329, 10.1007/s11665-018-3642-x
Kao, 2018, Tribological, electrochemical and biocompatibility properties of Ti6Al4V alloy produced by selective laser melting method and then processed using gas nitriding, CN or Ti-C:H coating treatments, Surf Coat Technol, 350, 172, 10.1016/j.surfcoat.2018.07.011
Sarao, 2018, Enhancing biocompatibility and corrosion resistance of Ti-6Al-4V alloy by surface modification route, J Therm Spray Technol, 27, 1388, 10.1007/s11666-018-0746-7
Yuan, 2017, Hydroxyapatite nanoparticle-coated 3D-Printed porous Ti6Al4V and CoCrMo alloy scaffolds and their biocompatibility to human osteoblasts, J Nanosci Nanotechnol, 18, 4360, 10.1166/jnn.2018.15207
Veerachamy, 2017, Studies on mechanical, biocompatibility and antibacterial activity of plasma sprayed Nano/Micron ceramic bilayered coatings on Ti–6Al–4V alloy for biomedical application, J Nanosci Nanotechnol, 18, 4515, 10.1166/jnn.2018.15332
Hamdi, 2019, Biocompatibility study of multi-layered hydroxyapatite coatings synthesized on Ti-6Al-4V alloys by RF magnetron sputtering for prosthetic-orthopaedic implant applications, Appl Surf Sci, 463, 292, 10.1016/j.apsusc.2018.08.157
Li, 2019, Improving biocompatibility of titanium alloy scaffolds by calcium incorporated silicalite-1 coatings, Inorg Chem Commun, 102, 61, 10.1016/j.inoche.2019.02.004
Kazemi, 2020, Investigation on the corrosion behavior and biocompatibility of Ti-6Al-4V implant coated with HA/TiN dual layer for medical applications, Surf Coatings Technol, 397, 126044, 10.1016/j.surfcoat.2020.126044
Yuan, 2019, Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: a review, Bioact Mater, 4, 56, 10.1016/j.bioactmat.2018.12.003
El hadad, 2020, Organic-inorganic hybrid coatings containing phosphorus precursors prepared by sol–gel on Ti6Al4V alloy: electrochemical and in-vitro biocompatibility evaluation, Prog Org Coat, 148
Liao, 2020, In vitro and in vivo biocompatibility study of surface modified TiN deposited on Ti6Al4V using high-power impulse magnetron sputtering technique, Surf Coat Technol, 394, 10.1016/j.surfcoat.2020.125814
Li, 2020, In vitro bioactivity and biocompatibility of bio-inspired Ti-6Al-4V alloy surfaces modified by combined laser micro/nano structuring, Molecules, 25