Selecting the initial steam temperatures in starting combined-cycle plants in compliance with the conditions of heating the high-pressure steam superheater outlet headers

Thermal Engineering - Tập 60 - Trang 420-425 - 2013
Yu. A. Radin1, T. S. Kontorovich1
1All-Russia Thermal Engineering Institute, Moscow, Russia

Tóm tắt

Results from an analysis of permissible initial steam temperatures and heating rates of the outlet headers of high-pressure steam superheaters and the steam lines of combined-cycle plants at which their cyclic strength is ensured are presented. A procedure is proposed using which startup assignment schedules for different thermal states can be constructed proceeding from the heating rates and initial steam temperatures selected depending on the initial temperature state of the high-pressure steam superheaters’ outlet headers.

Tài liệu tham khảo

SO (Enterprise Standard) 34.30.741-96: Technical Requirements for Maneuverability of Combined-Cycle Power Installations of Unit-Type Thermal Power Stations (SPO ORGRES, Moscow, 1996) [in Russian]. Permissible Temperature Stresses and Heating (Cooling) Rates of Thick-Walled Steam Lines (Energiya, Moscow, 1975) [in Russian]. A. F. Bogachev, Yu. A. Radin, and O. B. Gerasimenko, Operational Peculiarities and Damageability of the Heat-Recovery Steam Generators Used in Binary Combined-Cycle Plants (Energoatomizdat, Moscow, 2008) [in Russian]. V. V. Krasheninnikov, Yu. A. Radin, and B. I. Shmukler, “About the Validity of Measuring Live Steam and Reheat Steam Temperatures in Starting Power Units,” Therm. Eng., No. 2 (1990). RD (Guiding Document) 10-249-98: Regulations for Strength Design of Stationary Boilers and Steam and Hot-Water Pipelines (Nauchno-Tekhn. Tsentr Bezop. v Promyshl., Gosrortekhnadzor Rossii, 2004) [in Russian]. MU (Methodical Guidelines) 34-70-030-81: Methodical Guidelines for Calculating the Permissible Temperature Differences and Heating Rates for the Main Parts of Power Unit Boilers and Steam Lines (SPO Soyuztekhenergo, Moscow, 1983) [in Russian]. P. Fontaine and J. F. Galopin, “HRSG Optimization for Cycling Duty Based on Euro Norm EN 12952-3,” Modern Power Systems, Powergen Europe, Madrid, Spain, No. 10 (2007). G. D. Avrutskii, E. A. Don, B. N. Koloshin, et al., “Investigation of Stresses and Forces in the Pipelines of a K-800-240-3 Turbine Unit,” Therm. Eng., No. 9 (1991). E. R. Plotkin and A. Sh. Leyzerovich, Start-ups of Power Unit Steam Turbines (Energiya, Moscow, 1980) [in Russian].