Seismic response of reinforced concrete frames at different damage levels

Arias A (1970) A Measure of Earthquake Intensity. In: Hansen RJ (ed) Seismic Design for Nuclear Power Plants. MIT Press, Cambridge, pp 438–483

ASCE 41–06 (2007) Seismic rehabilitation of existing building. American Society of Civil Engineers, ASCE, Reston

ASCE 7–05 (2006) Minimum design loads for buildings and other structures. American Society of Civil Engineers, ASCE, Reston

Bojorquez E, Teran-Gilmore A, Ruiz SE, Reyes-Salazar A (2011) Evaluation of structural reliability of steel frames: interstory drift versus plastic hysteretic energy. Earthq Spectra 27(3):661–682

Bommer JJ, Martinez-Pereira A (2000) Strong motion parameters: definition, usefulness and predictability. Proc. of the 10th World Conference on Earthquake Engineering, Auckland, 2000; Paper No. 206

Chang G, Mander J (1994) Seismic energy based fatigue damage analysis of bridge columns: part I-evaluation of seismic capacity. NCEER Technical Report 94-0006

EPRI NP-5930 (1988) A Criterion for Determining Exceedance of the Operating Basis Earthquake, Electric Power Research Institute, Research Project 2848-16. Jack R. Benjamin and Associates, Inc., Mountain View

Goodnight J, Kowalsky M, Nau J (2013) The effect of load history on performance limit states of circular bridge columns (Special Edition). J Bridge Eng 18:1383–1396

Karsan I, Jirsa J (1969) Behavior of concrete under compressive loadings. ASCE J Struct Div 95(12):2543–2563

Kazantzi AK, Vamvatsikos D (2012) A study on the correlation between dissipated hysteretic energy and seismic performance. Proc. of the 15th World Conference on Earthquake Engineering, Lisbon, 2012

Kent DC, Park R (1971) Flexural members with confined concrete. ASCE J Struct Eng 97(7):1969–1990

Mander JP, Priestley MJN, Park R (1988) Theoretical stress–strain model for confined concrete. ASCE J Struct Eng 114(8):1804–1826

McKenna F, Fenves G, Filippou F, Mazzoni S, Scott M, Jeremic B, Elgamal A, Yang Z, Lu J, Arduino P, McKenzie P, Deierlein G, Law K (2000) Open System for Earthquake Engineering Simulation (OpenSEES). http://opensees.berkeley.edu/

Mohle J, Kunnath S (2006) Reinforcing Steel: OpenSees User’s Manual, 112–114. http://opensees.berkeley.edu/

Park YJ, Ang AH, Wen YK (1987) Damage-limiting aseismic design of buildings. Earthq Spectr 3(1):1–26

Priestley MJN, Calvi GM, Kowalsky M (2007) Displacement-based seismic design of structures, 1st edn. IUSS Press, Pavia, pp 193–194

Scott MH, Fenves GL (2006) Plastic hinge integration methods for force-based beam-column elements. ASCE J Struct Eng 132(2):244–252

Suarez LE, Montejo LA (2007) Applications of the wavelet transform in the generation and analysis of spectrum-compatible records. Struct Eng Mech 27(2):173–198

Vidot-Vega AL, Kowalsky MJ (2011) Impact of seismic input on strain/displacement response of rc members and frames. ACI Struct J 108(2):178–187

Wong K (2002) Inelastic seismic response analysis based on energy density spectra. J Earthq Eng 8(2):315–334

15WCEE Blind Test Challenge Preliminary Report (2012) 15th World Conference on Earthquake Engineering. Lisbon

15WCEE Blind Test Challenge Design Report (2012) 15th World Conference on Earthquake Engineering. Lisbon