Seismic performance of recycled concrete-filled square steel tube columns

ACI Committee 555, ACI 555-01 (2001), Removal and Reuse of Hardened Concrete, Farmington Hills (MI, USA): American Concrete Institute.

AISC-LRFD (1999), Load and Resistance Factor Design Specification for Structural Steel Buildings, 2nd ed, Chicago: American Institute of Steel Construction.

Andrzej BA and Kliszczewicz AT (2007), “Comparative Tests of Beams and Columns Made of Recycled Aggregate Concrete and Natural Aggregate Concrete,” Journal of Advanced Concrete Technology, 5(2): 259–273.

Breccolotti M and Materazzi AL (2010), “Structural Reliability of Eccentrically-loaded Sections in RC Columns Made of Recycled Aggregate Concrete,” Engineering Structure, 32(11): 3704–3712.

BS5400 (2005), Steel, Concrete and Composite Bridges, Part 5: Code of Practice for Design of Composite Bridges,” London: Brltky Standards Institutions.

Buck AD (1977), “Recycled Concrete as a Source of Aggregate,” ACI Materials Journal,: 212–219.

Casuccio M, Torrijos MC, Giaccio G and Zerbino R (2008), “Failure Mechanism of Recycled Aggregate Concrete,” Construction and Build Materials, 21: 1500–1506.

Chen ZP, Xu JJ and Xue JY (2014), “Performance and Calculations of Recycled Aggregate Concrete-filled Steel Tubular (RCFST) Short Column under Axial Compression,” International Journal of Steel Structure, 14(1): 31–42.

Deng SC and Yu F (2010), “Experimental Studies of Flexural Strength and Mechanics Performance for Recycled Concrete Beam,” 2nd International Conference on Waste Engineering and Management, ICWEM 2010 RILEM Proceedings, Vol.73, p. 695–716.

EN1994-1-1: 2004 (2004), Design of Composite Steel and Concrete Structure. Part1-1: General Rules and Rules for Buildings, Brussels: European Committee for Standardization.

GB/T228.1-2010 (2010), Metallic Materials-tensile Testing-Part 1 Method of Test at Room Temperature, Beijing: China Standards Press. (in Chinese)

GB/T 50081-2002 (2002), Standard for Test Method of Mechanical Properties on Ordinary Concrete, Beijing: China Building Industry Press. (in Chinese)

GB50936-2014 (2014), Technical Code for Concrete Filled Steel Tubular Structures, Beijing: China Building Industry Press. (in Chinese)

Guo ZH (1999), Principles of Reinforced Concrete, Beijing: Tsinghua University Press, 411–436. (in Chinese)

Han LH, Wei L and Reidar B (2014), “Developments an Advanced Applications of Concrete-filled Steel Tubular (CFST) Structures: Menbers,” Journal Construction Steel Research, 100: 211–228.

Huang YJ and Xiao JZ (2013), “Seismic Behavior and Damage Assessment of Recycled Aggregate Concretefilled Steel Tube Columns,” Journal of Tongji University, 41(3): 330–336. (in Chinese)

JGJ 52-2006 (2007), Standard for TechnicalRequirements and Test Method of Sand and Crushed Stone (or Gravel) for Ordinary Concrete, Beijing: China Building Industry Press.

Katz A (2003), “Properties of Concrete Made with Recycled Aggregate from Partially Hydrated Old Concrete,” Cement and Concrete Research, 33(5): 703–711.

Konno K, Sato Y and Uedo T (1998), “Mechanical Property of Recycled Concrete under Lateral Confinement,” Transactions of the Japan Concrete Institute, 20(3): 287–292.

Li JB, Xiao JZ and Huang J (2006), “Influence of Recycled Coarse Aggregate Replacement Percentage on Compressive Strength of Concrete,” Chinese Journal of Build Material, 9(3): 297–301. (in Chinese)

Liu Q, Xiao JZ and Sun ZH (2011), “Experimental Study on the Failure Mechanism of Recycled Concrete,” Cement Concrete Research, 41(10): 1050–1057.

Ma H and Xue JY (2013), “Seismic Performance of Steel-reinforced Recycled Columns under Low Cyclic Loads,” Construction and Building Materials, 48: 229–237.

Nixon PJ (1978), “Recycled Concrete as an Aggregate for Concrete- a Review,” Materials and Structures, 11(65): 371–378.

Tabsh SW and Abdelfatah AS (2009), “Influence of Recycled Concrete Aggregates on Strength Properties of Concrete,” Construction and Building Materials, 23(2): 1163–1167.

Wang YY, Chen J and Geng Y (2015), “Testing and Analysis of Axially Loaded Normal-strength Recycled Aggregate Concrete Filled Steel Tubular Stub Columns,” Engineering Structure, 86: 192–212.

Wu B, Zhao XY and Zhang JS (2012), “Cyclic Behavior of Thin-walled Square Steel Tubular Columns Filled with Demolished Concrete Lumps and Fresh Concrete,” Journal of Construction Steel Research, 77: 69–81.

Xiao JZ, Li WG, Fan YH and Huang X (2012), “An Overview of Study on Recycled Aggregate Concrete in China (1996–2011),” Construction and Building Material, 31: 364–383.

Xiao JZ, Sun YD and Falkner H (2006), “Seismic Performance of Frame Structures with Recycled Aggregate Concrete,” Engineering Structure, 28(1): 1–8.

Xiao JZ and Zhu XH (2005), “Study on Seismic Behavior of Recycled Concrete Frame Joints,” Journal of Tongji University, 33(4): 436–440. (in Chinese)

Yang YF and Han LH (2006), “Experimental Behavior of Recycled Aggregate Concrete Filled Steel Tubular Columns,” Journal of Construction Steel Research, 62(12): 1310–1324.

Zhao HT (2001), Steel-concrete Composite Structure, Beijing: Science Press. (in Chinese)