Scaled boundary finite element method for hydrodynamic bearings in rotordynamic simulations

Wang, 2012, Approximate analytical model for fluid film force of finite length plain journal bearing, Proc Inst Mech Eng Part C, 226, 1345, 10.1177/0954406211418302 Newkirk, 1925, Shaft whipping due to oil action in journal bearings, Gen Electr Rev, 28, 559 Grissom, 1985, Whirl/whip demonstration, 415 Muszynska, 1986, Whirl and whip – rotor/bearing stability problems, J Sound Vib, 110, 443, 10.1016/S0022-460X(86)80146-8 Schweizer, 2009, Oil whirl, oil whip and whirl/whip synchronization occurring in rotor systems with full-floating ring bearings, Nonlinear Dyn, 57, 509, 10.1007/s11071-009-9466-3 Woschke, 2017, Excitation mechanisms of non-linear rotor systems with floating ring bearings – simulation and validation, Int J Mech Sci, 134, 15, 10.1016/j.ijmecsci.2017.09.038 De Castro, 2008, Whirl and whip instabilities in rotor-bearing system considering a nonlinear force model, J Sound Vib, 317, 273, 10.1016/j.jsv.2008.02.047 Lokesh, 2019, Investigation of sub-synchronous noise & vibration on turbocharger fully floating hydrodynamic bearings – test & prediction, 3489, 10.1007/978-3-030-20131-9_344 Hamrock, 2004 Hori, 2006 Reynolds, 1886, On the theory of lubrication and its application to Mr. Beauchamp Tower’s experiments, including an experimental determination of the viscosity of olive oil, Philos Trans R Soc Lond, 177, 157 Arghir, 2002, The finite volume solution of the Reynolds equation of lubrication with film discontinuities, Int J Mech Sci, 44, 2119, 10.1016/S0020-7403(02)00166-2 Tanaka, 1972, Stability characteristics of floating bush bearings, J Lubr Technol, 94, 248, 10.1115/1.3451700 Booker, 1971, Dynamically-loaded journal bearings: numerical application of the mobility method, ASME J Lubr Technol, 93, 168, 10.1115/1.3451507 Schweizer, 2009, Total instability of turbocharger rotors – physical explanation of the dynamic failure of rotors with full-floating ring bearings, J Sound Vib, 328, 156, 10.1016/j.jsv.2009.03.028 Chasalevris, 2011, Aligned and misaligned wear pattern in fluid film bearings and influence on the rotor response Daniel, 2013, Numerical simulation of the dynamic behavior of turbochargers under consideration of full-floating bearings and ball bearings Woschke, 2015, Influence of bearing geometry of automotive turbochargers on the nonlinear vibrations during run-up, 835 Woschke, 2011, Numerical run-up simulation of a turbocharger with full floating ring bearings, 334 Elrod, 1981, A cavitation algorithm, J Lubr Technol, 103, 350, 10.1115/1.3251669 Eling, 2018 Booker, 2001, Finite element analysis of elastic engine bearing lubrication: theory, Rev Eur Élém Finis, 10, 705 Boedo, 2001, Finite element analysis of elastic engine bearing lubrication: application, Rev Eur Élém Finis, 10, 725 Wolf, 2003 Wolf, 1995, Consistent infinitesimal finite-element cell method: in-plane motion, Comput Methods Appl Mech Eng, 123, 355, 10.1016/0045-7825(95)00781-U Song, 1995, Consistent infinitesimal finite-element cell method: out-of-plane motion, J Eng Mech, 121, 613, 10.1061/(ASCE)0733-9399(1995)121:5(613) Song, 1999, The scaled boundary finite element method–alias consistent infinitesimal finite element cell method–for diffusion, Int J Numer Methods Eng, 45, 1403, 10.1002/(SICI)1097-0207(19990810)45:10<1403::AID-NME636>3.0.CO;2-E Ooi, 2012, Polygon scaled boundary finite elements for crack propagation modelling, Int J Numer Methods Eng, 91, 319, 10.1002/nme.4284 Deeks, 2003, Potential flow around obstacles using the scaled boundary finite-element method, Int J Numer Methods Fluids, 41, 721, 10.1002/fld.468 Chiong, 2014, Scaled boundary polygons with application to fracture analysis of functionally graded materials, Int J Numer Methods Eng, 98, 562, 10.1002/nme.4645 Gravenkamp, 2016, Efficient wave propagation simulation on quadtree meshes using SBFEM with reduced modal basis, Int J Numer Methods Eng, 110, 1119, 10.1002/nme.5445 Song, 2002, Semi-analytical representation of stress singularities as occurring in cracks in anisotropic multi-materials with the scaled boundary finite-element method, Comput Struct, 80, 183, 10.1016/S0045-7949(01)00167-5 Chatzisavvas, 2018 Jakobsson, 1957, The finite journal bearing, considering vaporization: report from the institute of machine elements, Trans Chalmers Univ Technol, 190, 1 Olsson, 1965, Cavitation in dynamically loaded bearings, Trans Chalmers Univ Technol, 308, 1 Elrod, 1974, A computer program for cavitation and starvation problems, Cavitation Relat Phenom Lubr (Proc. 1st Leeds-Lyon Symp. on Trib.), 37 Feng, 1986, Density and viscosity models for two-phase homogeneous hydrodynamic damper fluids, ASLE Trans, 29, 361, 10.1080/05698198608981697 Schweizer, 2008, ALE formulation of Reynolds fluid film equation, J Appl Math Mech, 88, 716 Thomas, 1973, Timoshenko beam finite elements, J Sound Vib, 31, 315, 10.1016/S0022-460X(73)80276-7 Sommerfeld, 1904, The hydrodynamic theory of lubrication friction, Z Math Phys, 50, 97 Ocvirk, 1952, Short-bearing Approximation for Full Journal Bearings Szeri, 1987, Some extensions of the lubrication theory of osborne Reynolds, J Tribol, 109, 21, 10.1115/1.3261321 Vignolo, 2011, Approximate analytical solution to Reynolds equation for finite length journal bearings, Tribol Int, 44, 1089, 10.1016/j.triboint.2011.03.020 Faria, 2014, On the hydrodynamic long journal bearing theory, 2, 2 Barrett, 1980, A finite length bearing correction factor for short bearing theory, J Lubr Technol, 102, 283, 10.1115/1.3251508 Capone, 1994, A finite length plain journal bearing theory, J Tribol, 116, 648, 10.1115/1.2928896 Gong, 2016, Analytical solution of Reynolds equation under dynamic conditions, Proc Inst Mech Eng Part J, 230, 416, 10.1177/1350650115604654 Merelli, 2019, Dynamic coefficients of finite length journal bearing. evaluation using a regular perturbation method, Int J Mech Sci, 151, 251, 10.1016/j.ijmecsci.2018.11.018 Sfyris, 2012, An exact analytical solution of the Reynolds equation for the finite journal bearing lubrication, Tribol Int, 55, 46, 10.1016/j.triboint.2012.05.013 Eling, 2015, Multilobe floating ring bearings for automotive turbochargers, 821 Reddi, 1969, Finite-element solution of the incompressible lubrication problem, J Lubr Technol, 91, 524, 10.1115/1.3554977 Moukalled, 2016, 6, 10.1007/978-3-319-16874-6 Dmochowski, 2013, 1137 Daniel, 2008, Enhanced fluid bearing simulation with standard multi body systems Woschke, 2013 Gero, 1986, An evaluation of finite difference and finite element methods for the solution of the Reynolds equation, ASLE Trans, 29, 166, 10.1080/05698198608981674 Huebner, 2001 Okereke, 2018 Wolf, 2000, The scaled boundary finite-element method – a primer: derivations, Comput Struct, 78, 191, 10.1016/S0045-7949(00)00099-7 Gravenkamp, 2018, Efficient simulation of elastic guided waves interacting with notches, adhesive joints, delaminations and inclined edges in plate structures, Ultrasonics, 82, 101, 10.1016/j.ultras.2017.07.019 Krome, 2017, A semi-analytical curved element for linear elasticity based on the scaled boundary finite element method, Int J Numer Methods Eng, 109, 790, 10.1002/nme.5306 Krome, 2017, Prismatic semi-analytical elements for the simulation of linear elastic problems in structures with piecewise uniform cross section, Comput Struct, 192, 83, 10.1016/j.compstruc.2017.06.015 Aslmand, 2018, Dynamic soil-structure interaction in a 3D layered medium treated by coupling a semi-analytical axisymmetric far field formulation and a 3D finite element model, Soil Dyn Earthq Eng, 115, 531, 10.1016/j.soildyn.2018.07.044 Vu, 2006, Use of higher-order shape functions in the scaled boundary finite element method, Int J Numer Methods Eng, 65, 1714, 10.1002/nme.1517 Vu, 2008, A p-hierarchical adaptive procedure for the scaled boundary finite element method, Int J Numer Methods Eng, 73, 47, 10.1002/nme.2055 He, 2014, Use of Fourier shape functions in the scaled boundary method, Eng Anal Bound Elem, 41, 152, 10.1016/j.enganabound.2014.01.012 Gravenkamp, 2017, On the use of NURBS-based discretizations in the scaled boundary finite element method for wave propagation problems, Comput Methods Appl Mech Eng, 315, 867, 10.1016/j.cma.2016.11.030 Natarajan, 2015, Isogeometric analysis enhanced by the scaled boundary finite element method, Comput Methods Appl Mech Eng, 283, 733, 10.1016/j.cma.2014.09.003 Gravenkamp, 2019, High-order shape functions in the scaled boundary finite element method revisited, Arch Comput Methods Eng, 1 Kovvali, 2011, Theory and applications of gaussian quadrature methods, Synth Lect Algorithms Softw Eng, 3, 1, 10.2200/S00366ED1V01Y201105ASE008 Song, 1997, The scaled boundary finite-element method – alias consistent infinitesimal finite-element cell method – for elastodynamics, Comput Methods Appl Mech Eng, 147, 329, 10.1016/S0045-7825(97)00021-2 Rao, 2005 Gravenkamp, 2012, A numerical approach for the computation of dispersion relations for plate structures using the scaled boundary finite element method, J Sound Vib, 331, 2543, 10.1016/j.jsv.2012.01.029 Song, 2000, The scaled boundary finite-element method – a primer: solution procedures, Comput Struct, 78, 211, 10.1016/S0045-7949(00)00100-0