Scalable nanostructured membranes for solid-oxide fuel cells
Tóm tắt
Từ khóa
Tài liệu tham khảo
Singhal, S. C. Advances in solid oxide fuel cell technology. Solid State Ionics 135, 305–313 (2000).
Evans, A., Bieberle-Hütter, A., Rupp, J. L. M. & Gauckler, L. J. Review on microfabricated micro-solid oxide fuel cell membranes. J. Power Sources 194, 119–129 (2009).
Wachsman, E. D., Jayaweera, P., Krishnan, G. & Sanjurjo, A. Electrocatalytic reduction of NOx on La1–xAxB1–yB′yO3–δ: evidence of electrically enhanced activity. Solid State Ionics 136–137, 775–782 (2000).
Clark, D. J., Losey, R. W. & Suitor, J. W. Separation of oxygen by using zirconia solid electrolyte membranes. Gas Separ. Purif. 6, 201–205 (1992).
Riegel, J., Neumann, H. & Wiedenmann, H. M. Exhaust gas sensors for automotive emission control. Solid State Ionics 152–153, 783–800 (2002).
Beckel, D. et al. Thin films for micro solid oxide fuel cells. J. Power Sources 173, 325–345 (2007).
deSouza, S., Visco, S. J. & DeJonghe, L. C. Thin-film solid oxide fuel cell with high performance at low temperature. Solid State Ionics 98, 57–61 (1997).
Chen, X., Wu, N. J., Smith, L. & Ignatiev, A. Thin-film heterostructure solid oxide fuel cells. Appl. Phys. Lett. 84, 2700–2702 (2004).
Ignatiev, A., Chen, X., Wu, N. J., Lu, Z. G. & Smith, L. Nanostructured thin solid oxide fuel cells with high power density. Dalton Trans. 5501–5506 (2008).
Jankowski, A. F., Hayes, J. P., Graff, R. T. & Morse, J. D. Micro-fabricated thin-film fuel cells for portable power requirements. Mater. Res. Soc. Symp. Proc. 730, V4.2 (2002).
Johnson, A. C., Lai, B. K., Xiong, H. & Ramanathan, S. An experimental investigation into micro-fabricated solid oxide fuel cells with ultra-thin La0.6Sr0.4Co0.8Fe0.2O3 cathodes and yttria-doped zirconia electrolyte films. J. Power Sources 186, 252–260 (2009).
Johnson, A. C., Baclig, A., Harburg, D. V., Lai, B. K. & Ramanathan, S. Fabrication and electrochemical performance of thin-film solid oxide fuel cells with large area nanostructured membranes. J. Power Sources 195, 1149–1155 (2010).
Lai, B. K., Xiong, H., Tsuchiya, M., Johnson, A. C. & Ramanathan, S. Microstructure and microfabrication considerations for self-supported on-chip ultra-thin micro-solid oxide fuel cell membranes. Fuel Cells 9, 699–710 (2009).
Lai, B. K., Kerman, K. & Ramanathan, S. On the role of ultra-thin oxide cathode synthesis on the functionality of micro-solid oxide fuel cells: structure, stress engineering and in situ observation of fuel cell membranes during operation. J. Power Sources 195, 5185–5196 (2010).
Tsuchiya, M., Lai, B. K., Johnson, A. C. & Ramanathan, S. Photon-assisted synthesis of ultra-thin yttria-doped zirconia membranes: structure, variable temperature conductivity and micro-fuel cell devices. J. Power Sources 195, 994–1000 (2010).
Baertsch, C. D. et al. Fabrication and structural characterization of self-supporting electrolyte membranes for a micro solid-oxide fuel cell. J. Mater. Res. 19, 2604–2615 (2004).
Yamamoto, N. et al. Nonlinear thermomechanical design of microfabricated thin plate devices in the post-buckling regime. J. Micromech. Microeng. 20, 035027 (2010).
Muecke, U. P. et al. Micro solid oxide fuel cells on glass ceramic substrates. Adv. Funct. Mater. 18, 3158–3168 (2008).
Bieberle-Hütter, A. et al. A micro-solid oxide fuel cell system as battery replacement. J. Power Sources 177, 123–130 (2008).
Huang, H. et al. High-performance ultrathin solid oxide fuel cells for low-temperature operation. J. Electrochem. Soc. 154, B20–B24 (2007).
Su, P. C., Chao, C. C., Shim, J. H., Fasching, R. & Prinz, F. B. Solid oxide fuel cell with corrugated thin film electrolyte. Nano Lett. 8, 2289–2292 (2008).
Shim, J. H., Chao, C. C., Huang, H. & Prinz, F. B. Atomic layer deposition of yttria-stabilized zirconia for solid oxide fuel cells. Chem. Mater. 19, 3850–3854 (2007).
Quinn, D. J., Wardle, B. & Spearing, S. M. Residual stress and microstructure of as-deposited and annealed, sputtered yttria-stabilized zirconia thin films. J. Mater. Res. 23, 609–618 (2008).
Garbayo, I. et al. Electrical characterization of thermomechanically stable YSZ membranes for micro solid oxide fuel cells applications. Solid State Ionics 181, 322–331 (2010).
Tang, Y., Stanley, K., Wu, J., Ghosh, D. & Zhang, J. Design consideration of micro thin film solid-oxide fuel cells. J. Micromech. Microeng. 15, S185–S192 (2005).
Srikar, V. T., Turner, K. T., Ie, T. Y. A. & Spearing, S. M. Structural design considerations for micromachined solid-oxide fuel cells. J. Power Sources 125, 62–69 (2004).
Hsieh, H. T., Chiu, C. W., Tsao, T., Jiang, F. K. & Su, G. D. J. Low-actuation-voltage MEMS for 2-D optical switches. J. Lightwave Technol. 24, 4372–4379 (2006).
Gibson, L. J. & Ashby, M. F. Cellular Solids: Structure and Properties 2nd edn (Cambridge Univ. Press, 1997).
Ziebart, V., Paul, O. & Baltes, H. Strongly buckled square micromachined membranes. J. Microelectromech. S 8, 423–432 (1999).