SVET, SKP and EIS study of the corrosion behaviour of high strength Al and Al–Li alloys used in aircraft fabrication

ASM Metals Handbook, 1990, Properties and selection: nonferrous alloys and special, Purpose Mater., 2, 17

Grilli, 2010, Localized corrosion of a 2219 aluminium alloy exposed to a 3.5% NaCl solution, Corros. Sci., 52, 2855, 10.1016/j.corsci.2010.04.035

Metikos-Hukovic, 1994, Impedance spectroscopic study of aluminium and Al-alloys in acid solution: inhibitory action of nitrogen containing compounds, J. Appl. Electrochem., 24, 772, 10.1007/BF00578093

Nisancioglu, 1992, Corrosion of aluminium alloys, Proc. ICAA3, 3, 239

G.M. Scamans, J.A. Hunter, N.J.H. Holroyd, Corrosion of Aluminum – a new approach, in: Proceedings of 8th International Light Metals Congress, Leoben-Wien, 1987, pp. 699–705.

Li, 2005, Localized corrosion mechanism of 2XXX series Al alloy containing S(Al2CuMg) and (Al2Cu) precipitates in 4.0% NaCl solution at pH 6.1, Mater. Chem. Phys., 91, 325, 10.1016/j.matchemphys.2004.11.034

Buchheit, 1997, Local Dissolution Phenomena Associated with S Phase (Al2CuMg) Particles in Aluminum Alloy 2024–T3, J. Electrochem. Soc., 144, 2621, 10.1149/1.1837874

Zhu, 2003, Corrosion protection of AA 2024–T3 by bis-[3-(triethoxysilyl)propyl]tetrasulfide in neutral sodium chloride solution. Part 1: corrosion of AA 2024–T3, Corros. Sci., 45, 2163, 10.1016/S0010-938X(03)00060-X

Sharma, 2008, Microstructural and mechanical characterization of various modified 7XXX series spray formed alloys, Mater. Charact., 59, 91, 10.1016/j.matchar.2007.01.013

Andreatta, 2003, Electrochemical characterisation of aluminium AA7075-T6 and solution heat treated AA7075 using a micro-capillary cell, Electrochim. Acta, 48, 3239, 10.1016/S0013-4686(03)00379-7

Birbilis, 2006, Electrochemical behavior and localized corrosion associated with Al7Cu2Fe particles in aluminum alloy 7075-T651, Corros. Sci., 48, 4202, 10.1016/j.corsci.2006.02.007

Jones, 2009, The interaction between pitting corrosion, grain boundaries, and constituent particles during corrosion fatigue of 7075-T6 aluminum alloy, Int. J. Fatigue, 31, 686, 10.1016/j.ijfatigue.2008.03.016

Souto, 2007, Investigating corrosion processes in the micrometric range: a SVET study of the galvanic corrosion of zinc coupled with iron, Corros. Sci., 49, 4568, 10.1016/j.corsci.2007.04.016

Franklin, 1991, Pitting corrosion by bacteria on carbon steel, determined by the scanning vibrating electrode technique, Corros. Sci., 32, 945, 10.1016/0010-938X(91)90014-G

Isaacs, 1987, The use of the scanning vibrating electrode technique for detecting defects in ion vapor-deposited aluminum on steel, Corrosion, 43, 594, 10.5006/1.3583835

Rossino, 2009, Issues on the mean stress effect in fretting fatigue of a 7050-T7451 Al alloy posed by new experimental data, Int. J. Fatigue, 31, 2041, 10.1016/j.ijfatigue.2008.12.011

Moreto, 2011, Corrosion and fatigue behavior of new Al alloys, Proc. Eng., 10, 1521, 10.1016/j.proeng.2011.04.254

Moreto, 2012, Corrosion behavior of Al and Al–Li alloys used as aircraft materials, Corros. Prot. Mater., 31, 60

Gamboni, 2013, Effect of salt-water fog on fatigue crack nucleation of Al and Al–Li alloys, Mat. Res., 10.1590/S1516-14392013005000190

Chih-Kuang, 1998, Corrosion fatigue behavior of 7050 aluminum alloys in different tempers, Eng. Fract. Mech., 59, 779, 10.1016/S0013-7944(97)00173-2

Bucci, 1979, In: flow growth and fracture, ASTM STP 631, American Society for Testing and Materials 1977, selecting aluminum alloys to resist failure by fracture mechanisms, Eng. Fract. Mech., 12, 407, 10.1016/0013-7944(79)90053-5

Mansfeld, 1993, Impedance spectra for aluminum 7075 during the early stages of immersion in sodium chloride, Electrochim. Acta, 11, 245

Mansfeld, 1990, Pitting and passivation of Al alloys and Al-based metal matrix composite, J. Electrochem. Soc., 137, 78, 10.1149/1.2086442

Jüttner, 1990, Electrochemical Impedance Spectroscopy (EIS) of corrosion processes on inhomogeneous surfaces, Electrochim. Acta, 35, 1501, 10.1016/0013-4686(90)80004-8

Kendig, 1982, AC electrochemical impedance of a model pit, J. Electrochem. Soc., 129

Oltra, 1988, Application of impedance technique to localized corrosion, Corros. Sci., 28, 1, 10.1016/0010-938X(88)90002-9

Ahmed, 1972, 475

Ferreira, 2011, Corrosion behaviour of Al/Al3Ti and Al/Al3Zr functionally graded materials produced by centrifugal solid-particle method: influence of the intermetallics volume fraction, Corros. Sci., 53, 2058, 10.1016/j.corsci.2011.02.010

Martin, 2005, Impedance studies of the passive film on aluminium, Corros. Sci., 47, 3187, 10.1016/j.corsci.2005.05.058

Szklarska-Smialowska, 1999, Pitting corrosion of aluminum, Corros. Sci., 41, 1743, 10.1016/S0010-938X(99)00012-8

Cavanaugh, 2007, Investigating localized corrosion susceptibility arising from Sc containing intermetallic Al3Sc in high strength Al-alloys, Scripta Mater., 56, 995, 10.1016/j.scriptamat.2007.01.036

Li, 2006, Localized corrosion mechanism associated with precipitates containing Mg in Al alloys, Trans. Nonferrous Met. Soc. China, 16, 1268, 10.1016/S1003-6326(07)60005-3

Andreatta, 2003, Effect of solution heat treatment on galvanic coupling between intermetallics and matrix in AA7075-T6, Corros. Sci., 45, 1733, 10.1016/S0010-938X(03)00004-0

Meng, 2004, Effect of Cu Content on Corrosion Behavior of 7xxx series aluminum alloys, J. Electrochem. Soc., 151, B271, 10.1149/1.1695385

Boag, 2009, How complex is the microstructure of AA2024-T3?, Corros. Sci., 51, 1565, 10.1016/j.corsci.2009.05.001

Boag, 2010, Stable pit formation on AA2024-T3 in a NaCl environment, Corros. Sci., 52, 90, 10.1016/j.corsci.2009.08.043

Boag, 2011, Corrosion of AA2024-T3 Part I: localised corrosion of isolated IM particles, Corros. Sci., 53, 17, 10.1016/j.corsci.2010.09.009