SHS production of heat-shield materials from minerals and residual products: Influence of preliminary mechanochemical treatment and modifying agents
International Journal of Self-Propagating High-Temperature Synthesis - Tập 25 - Trang 166-172 - 2016
Tóm tắt
We report on preparation of porous refractory ceramics from natural quartz sand and industrial wastes (fly ash and wastes of concrete production) by SHS in a mode of thermal explosion with preliminary mechanochemical treatment of charge mixtures in the presence of carbonaceous modifying agents (activated carbon and polystyrene). The Al2O3–AlN-based composite synthesized in optimized conditions exhibited low thermal conductivity [0.185–0.228 W/(m K)], finely porous structure, and high compression strength (30–96 MPa).
Tài liệu tham khảo
Ladygichev, M.G., Gusovsky, V.L., and Kashcheev, I.Yu., Ogneupory dlya nagrevatel’nykh i termicheskikh pechei (Refractories for Calefactory and Heating Furnaces), Moscow: Teplotekhnika, 2004, pp. 22–37.
Merzhanov A.G. and Mukas’yan, A.S., Tverdoplamennoe gorenie (Solid-Flame Combustion), Moscow: Torus Press, 2007, pp. 277–282.
Vladimirov, V.S. Karpukhin, I.A., and Moyzis, S.E., New generation of heat-protective and refractory materials, Novye Ogneupory, 2002, no. 1, pp. 81–88.
Levashov, E.A., Rogachev, A.S., Kurbatkina, V.V., Maksimov, Yu.M., and Yukhvid, V.I., Perspeekyivnye materialy i tekhnologii samorasprostranyayushchegosya vysokotemperaturnogo sinteza (Promissory Materials and Processes of Self-Propagating High-Temperature Synthesis), Moscow: Izd. MISiS, 2011, pp. 153–156.
Podbolotov, K.B., SHS in the Al–SiO2 system: The effect of additives, Int. J. Self-Propag. High-Temp. Synth., 2010, vol. 19, no. 4, pp. 244–252. doi 10.3103/S1061386210040035
Rogachev, A.S. and Mukasyan, A.S., Experimental verification of discrete models for combustion of microheterogeneous compositions yielding condensed combustion products (Review), Combust. Explos. Shock Waves, 2015, vol. 51, no. 1, pp. 53–62. doi 10.1134/S0010508215010050
Perepelitsyn, V.A., Koroteev, V.A., and Rytvin, V.M., Aluminosilicate refractory technogenic raw materials, Ogneupory Tekh. Keram., 2011, nos. 4–5, pp. 76–86.
Mansurov, Z.A., Mofa, N.N., Sadykov, B.S., and Sabaev, Zh.Zh., Self-propagating high-temperature synthesis (SHS) of high-porous ceramics on the basis of natural and industrial raw materials, Izv. Nat. Akad. Nauk Rep. Kazakhstan, 2015, no. 2, pp. 118–135.
Podbolotov, K.B., Dyatlov, E.M., Babak, A.A., and Sinyakina, T.O., Effect of mechanical activation on the process of self-propagating high-temperature synthesis in the Al–SiO2–C system, Ogneupory Tekh. Keram., 2014, nos. 1–2, pp. 6–11.
Mansurov, Z.A., Mofa, N.N., Sadykov, B.S., and Shabanova, T.A., Activation of the technological combustion process of oxide systems by different modifying additives, Adv. Ceram. Sci. Eng., 2013, vol. 2, no. 3, pp. 106–112.
Mofa, N.N., Mechanochemical treatment as a promising process for fabrication of new composite materials, in Chemistry and Chemical Technology: Modern Problems, Mansurov, Z.A., Ed., Almaty: Izd. Nat. Univ., 2004, pp. 189–232.
Joo, H.I. and Gülder, Ö.L., Soot formation and temperature structure in small methane–oxygen diffusion flames at subcritical and supercritical pressures, Combust. Flame, 2010, vol. 157, no. 6, pp. 1194–1201. doi 10.1016/j.combustflame.2009.11.003
Kroker, R., Schneider, M., and Hamann, K., Polymer reactions on the surface of powders, Usp. Khim., 1974, vol. 43, no. 2, pp. 349–369.
Mansurov, Z.A., Mofa, N.N., Sadykov, B.S., and Antonyuk, V.I., Mechanochemical treatment, features of the structure and properties, and reactivity of SHS systems based on natural materials: 3. Influence of mechanochemical treatment and modification of oxide materials on the technological combustion, J. Eng. Phys. Thermophys., 2014, vol. 87, no. 5, pp. 1094–1102. doi 10.1007/s10891-014-1111-4
Deryagin, B.V., Krotova, N.A., and Smilga, P.M., Adgeziya tverdykh tel (Adhesion of Solids), Moscow: Nauka, 1973, pp. 51–58.