SAFETY ANALYSIS METHODOLOGY FOR AGED CANDU® 6 NUCLEAR REACTORS

W. J. Hartmann, “NUCCP (NUCIRC) Predictions of Channel Flow and Comparison with Site Measurements at the Point Lepreau Generating Station”: Proceedings of the 13th Annual Reactor Simulation Symposium, Chalk River, Ontario, Canada, April, 1987. W. J. Hartmann, P. D. Thompson (NBPower), M.R. Soulard (AECL), “Flow Verification Support for the PLGS Startup after the 1995 Outage”: Proceedings of the 17th Annual Canadian Nuclear Society Conference, Fredericton, New Brunswick, Canada, June, 1996. W.J. Hartmann, M. Cormier (AECL), B. Willemsen (NBPower), T. Whynot (NBPower), P. D. Thompson (NBPower), “Plant Ageing Adjustments to Maintain Reactor Power at the Point Lepreau Generating Station”: Proceedings of the 5th International Conference on CANDU Maintenance, Toronto, Ontario, Canada, November, 2000. O. Vagner (HQ), M. Nguyen, G. Hotte, “History of ROP Margins Erosion and Power Recovery at Gentilly-2”, Proceedings of the 30th Annual Canadian Nuclear Society Conference, Calgary, Alberta, Canada, June, 2009. W.J. Hartmann, C. Zeng (TQNPC), J. Feng (TQNPC), “Qinshan CANDU® 6 Main Heat Transport System High Operational Performance”, Proceedings of the 31st Annual Canadian Nuclear Society Conference, Montreal, Québec, Canada, May, 2010. W.J. Hartmann, C. Zeng (TQNPC), J. Feng (TQNPC), X. Mou (TQNPC), “Qinshan CANDU® 6 Main Heat Transport System High Accuracy Performance Tracking in Support of Regional Overpower Protection”, Proceedings of the 32nd Annual Canadian Nuclear Society Conference, Niagara Falls, Canada, June, 2011. A. Elalami (AECL), W.J. Hartmann, A. Espahbod, M. Tochaie, “NUCIRC Thermal-Hydraulic Applications in Support of CANDU® Plant Design and Operation”, Proceedings of the 31st Annual Canadian Nuclear Society Conference, Montreal, Québec, Canada, May, 2010. N. Christodoulou (AECL), A.R. Causey, R.A. Holt, C.N. Tome, N. Badie, R.J. Klassen, R. Sauve, and C.H. Woo, “Modeling the in-reactor deformation of Zr-2.5Nb pressure tubes in CANDU power reactors”, American Society for Testing and Materials, Special Technical Publication 1295, pp. 518, (1996). W.J. Hartmann, H. Choi (KHNP), D.J. Wallace (AECL), V. Caxaj, A. Elalami, “CANDU® 6 HTS Diagnostic and Adjustment Methodology for Economic and Safety-System Optimization”, Proceedings of the 30th Annual Canadian Nuclear Society Conference, Calgary, Alberta, Canada, June, 2009. T.G. Beuthe and B.N. Hanna, “CATHENA MOD-3.5D/Revision 2 Input Reference”, AECL Report, 153-112020-UM-001 (2005). G.G. Chassie, “ELESTRES-IST: User's Manual”, AECL Report, 153-113370-UM-001, Rev. 0 (2006). S.M. Gehl, “Release of Fission Gas during Transient Heating of LWR Fuel”, ANL-80-108, Report from Argonne National Lab. (1981).