Rutting resistance of toner-modified asphalt binder and mixture

M. Rahi, E. H. Fini, P. Hajikarimi, F. M. Nejad, Rutting characteristics of styrene-ethylene/propylene-styrene polymer modified asphalt, J. Mater. Civ. Eng. 27(4) (2014) 04014154.

P. Hajikarimi, M. Rahi, F. Moghadas Nejad, Comparing different rutting specification parameters using high temperature characteristics of rubber-modified asphalt binders, Road Mater. Pave. Des. 16(4) (2015) 751–766.

P. Ghasemi, M. Aslani, D. K. Rollins, R. C. Williams, V. R. Schaefer, Modeling rutting susceptibility of asphalt pavement using principal component pseudo inputs in regression and neural networks, Inter. J. Pave. Res. Technol. 11(7) (2018) 679–690.

A. Golalipour, Modification of multiple stress creep and recovery test procedure and usage in specification, (Doctoral dissertation), University of Wisconsin, Madison, USA, 2011.

D. Sybilski, Zero-shear viscosity of bituminous binder and its relation to bituminous mixture’s rutting resistance, Transp. Res. Rec. 1535(1) (1996) 15–21.

R. Garba, Permanent deformation properties of asphalt concrete mixtures, (Doctoral dissertation), Department of Road end Railway Engineering Norwegian University of Science and Technology, Trondheim, Norway, 2002.

M. Alsalihi, A. Hosseini, A. Faheem, Direct characterization of aging diffusion in asphalt mixtures using microindentation and relaxation (MIR). In Airfield and Highway Pavements 2017, Philadelphia, Pennsylvania, USA, 2017, pp. 129–140.

A. Malakooti, M. Maguire, R. J. Thomas, Evaluating Electrical Resistivity as a Performance based Test for Utah Bridge Deck Concrete. No. CAIT-UTC-NC35. Rutgers University. Center for Advanced Infrastructure and Transportation, Washington DC, USA, 2018.

S. Tayfur, H. Ozen, A. Aksoy, Investigation of rutting performance of asphalt mixtures containing polymer modifiers, Constr. Buil. Mater. 21(2) (2007) 328–337.

N. Saboo, P. Kumar, Analysis of different test methods for quantifying rutting susceptibility of asphalt binders, J. Mater. Civ. Eng. 28(7) (2016) 04016024.

M. D. I. Domingos, A. L. Faxina, Susceptibility of asphalt binders to rutting: literature review, J. Mater. Civ. Eng. 28(2) (2015) 04015134.

M. Mohammadafzali, H. Ali, G. A. Sholar, W. A. Rilko, M. Baqersad, Effects of Rejuvenation and Aging on Binder Homogeneity of Recycled Asphalt Mixtures, J. Transp. Eng., Part B: Pave. 145(1) (2018) 04018066.

M. Baqersad, H. Ali, F. Haddadi, I. Khakpour, Short-and long-term rheological and chemical characteristics of nanomodified asphalt binder, Petrol. Sci. Technol. 37(15) (2019) 1788–1799.

Y. EL Haloui, P. Hajikarimi, F. Fakhari Tehrani, J. Absi, M. El Omari, C. Petit, Micromechanical modeling of the interfacial zone in hot mix asphalt through use of a heterogeneous numerical method, European J. Environ. Civ. Eng. (2018) 1–16 https://doi.org/10.1080/19648189.2018.1492462 .

G. H. Hamedi, S. A. Tahami, The effect of using anti-stripping additives on moisture damage of hot mix asphalt, Inter. J. Adhesion Adhesives 81 (2018) 90–97.

J. Liu, K. Yan, J. Liu, Rheological properties of warm mix asphalt binders and warm mix asphalt binders containing polyphosphoric acid, Inter. J. Pave. Res. Technol. 11(5) (2018) 481–487.

S. A. Elkholy, A. A. El-Rahman, M. El-Shafie, Z. L. Abo-Shanab, Physical and rheological properties of modified sulfur asphalt binder, Inter. J. Pave. Res. Technol. 11(8) (2018) 838–845.

R. Tripathi, K. W. Pickett, M. Solaimanian, T. W. Kennedy, Toner-modified Asphalt Compositions. U.S. Patent No. 6,113,681. Texas Department Of Transportation, U.S. Patent and Trademark Office, Washington DC, USA, 2000.

M. A. Notani, M. Mokhtarnejad, Investigating the rheological and self-healing capability of toner-modified asphalt binder, Proc. Institution Civ. Eng. Constr. Mater., (2018) 1–9 https://doi.org/10.1680/jcoma.17.00072 .

D. J. d’Entrecasteaux, Waste toner recovery system and method. U.S. Patent No. 7,962,063. Washington, DC: U.S. Patent and Trademark Office, 2011.

J. Ruan, J. Li, Z. Xu, An environmental friendly recovery production line of waste toner cartridges, J. Hazard. Mater. 185(2–3) (2011) 696–702.

M. A. Notani, F. Moghadas Nejad, E. H. Fini, P. Hajikarimi, Low-Temperature Performance of Toner-Modified Asphalt Binder, J. Transp. Eng., Part B: Pave. 145(3) (2019) 04019022.

M. A. Notani, F. Moghadas Nejad, A. Khodaii, P. Hajikarimi, Evaluating fatigue resistance of toner-modified asphalt binders using the linear amplitude sweep test, Road Mater. Pave. Des. 20(8) (2018) 1927–1940.

A. Daghighi, A. Nahvi, Effect of different additives on fatigue behaviour of asphalt mixtures, Constr. Mater. Struct. Proc. First Inter. Conf. Constr. Mater. Struct., IOS Press, Amsterdam, 2014, pp. 601–607.

M. Solaimanian, T. W. Kennedy, R. Tripathi, Performance characteristics of asphalt binders and mixtures modified by waste toner, Transp. Res. Rec. 1638(1) (1998) 120–128.

R. Rahbar-Rastegar, J. S. Daniel, E. V. Dave, Evaluation of viscoelastic and fracture properties of asphalt mixtures with long-term laboratory conditioning, Transp. Res. Rec. 2672(28) (2018) 503–513.

A. Arabzadeh, M. A. Notani, A. K. Zadeh, A. Nahvi, A. Sassani, H. Ceylan, Electrically conductive asphalt concrete: An alternative for automating the winter maintenance operations of transportation infrastructure, Composites Part B: Eng. 173(15) (2019) 106985.

R. C. Van Rooijen, A. H. de Bondt, Experience with the zero-shear viscosity concept to characterise rutting, Proc. 3rd Eurasphalt and Eurobitume Congress, Vienna, Austria, 2 2004.

M. Centeno, I. Sandoval, I. Cremades, J. Alarcon, Assessing rutting susceptibility of five different modified asphalts in bituminous mixtures using rheology and wheel tracking test. No. 08-0705. Transp. Res. Board, Washington DC, USA, 2008.

G. M. Rowe, J. A. D’Angelo, M. J. Sharrock, Use of the zero shear viscosity as a parameter for the high temperature binder specification parameter, 2nd Inter. Sympos. Binder Rheol. Pave. Perform., San Antonio, Texas, USA, 2002.

R. Ben Othman, S. El Euch Khay, A. Loulizi, J. Neji, Laboratory evaluation of an ecological pavement construction material: sand concrete reinforced with polypropylene fibres, European J. Environ. Civ. Eng. 23(3) (2019) 287–299.

A. Arabzadeh, M. Guler, Thermal fatigue behavior of asphalt concrete: A laboratory-based investigation approach, Inter. J. Fatigue 121 (2019) 229–236.

D. A. Anderson, D. W. Christensen, H. U. Bahia, R. Dongre, M. G. Sharma, C. E. Antle, J. Button, Binder characterization and evaluation, volume 3: Physical characterization. Report No. SHRP-A-369. Strategic Highway Research Program, National Research Council, Washington DC, USA,1994.

American Society for Testing and Materials, Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer. ASTM D7405-15. ASTM International, West Conshohocken, PA, USA, 2015.

M. W. Witczak, Simple performance test for superpave mix design Transp. Res. Board, Washington DC, USA, Vol. 465, 2002.

H. Wang, Z. Fan, J. Zhang, Development of a full-depth wheel tracking test for asphalt pavement structure: methods and performance evaluation, Adv. Mater. Sci. Eng. 168 (2016) 893–905.

M. Zhang, Z. Fang, T. Wang, Z. Li, Study on High Temperature Stability of Hot Mix Asphalt Mixture with Low Volume RAP, DEStech Transactions Mater. Sci. Eng. (2017) https://doi.org/10.12783/dtmse/ictim2017/9901 .

P. Li, K. Jiang, H. Li, High-Temperature Stability of Asphalt Mixture with the Influence of Styrene Butadiene Styrene, Proc. Soci. Behavioral Sci. 43 (2012) 842–848.

M. R. Pouranian, R. Imaninasab, M. Shishehbor, The effect of temperature and stress level on the rutting performance of modified stone matrix asphalt, Road Mater. Pave. Des. (2018) 1–13 https://doi.org/10.1080/14680629.2018.1546221 .

P. Hao, Y. Hachiya, Evaluation indicator of asphalt mixture rutting susceptibility, J. Test. Eval. 32(3) (2004) 194–201.

M. R. Pouranian, J. E. Haddock, Determination of voids in the mineral aggregate and aggregate skeleton characteristics of asphalt mixtures using a linear-mixture packing model, Constr. Buil. Mater. 188 (2018) 292–304.

American Society for Testing and Materials, Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures. ASTM D6927-15. ASTM International, West Conshohocken, PA, USA, 2015.

Y. Yildirim, D. Hazlett, Davio, R., on Waste, T. Toner-modified asphalt demonstration projects, Resour. Conserv. Recycl. 42(3) (2004) 295–308.

American Association of State Highway and Transportation Officials, Standard method of test for multiple stress creep recovery (MSCR) test of asphalt binder using a dynamic shear rheometer (DSR). AASHTO T P70. AASHTO, WashingtonDC, USA, 2009.