Rotating plasticity and nonshakedown collapse modes for elastic–plastic bodies under cyclic loads

Koiter, 1963, General theorems for elastic–plastic solids, 165 Melan, 1938, Zur Plastizität des räumlichen Kontinuums, Ing Arch, 9, 116, 10.1007/BF02084409 Ponter ARS. A general shakedown theorem for elastic plastic bodies with work hardening. In: Proceedings of the SMIRT-3, paper L5/2; 1975 Debordes O. Duality: some results in asymptotical elasticplasticity. In: A. Auslender, editor. Convex analysis and its applications. Berlin: Springer-Verlag; 1977. p. 100–114. König, 1987 Corradi, 1974, Dynamic inadaptation theorem for elastic-perfectly plastic continua, J Mech Phys Solids, 22, 401, 10.1016/0022-5096(74)90005-2 Pham DC. Extended shakedown theorems for elastic-plastic bodies under quasi-periodic dynamic loading. Proc R Soc Lond A 1992;439:649–58. Pham, 1994, Kinematical approach to shakedown analysis of some structures, Q Appl Math, 52, 707, 10.1090/qam/1306045 Pham, 2000, From local failure toward global collapse of elastic plastic structures in fluctuating fields, Int J Mech Sci, 42, 819, 10.1016/S0020-7403(98)00137-4 Pham DC, Weichert D. Shakedown analysis for elastic plastic bodies with limited kinematic hardening. Proc R Soc Lond A 2001;457:1097–110. Pham, 2003, Shakedown theory for elastic-perfectly plastic bodies revisited, Int J Mech Sci, 45, 1011, 10.1016/j.ijmecsci.2003.09.006 Pham, 2007, Shakedown theory for elastic plastic kinematic hardening bodies, Int J Plast, 23, 1240, 10.1016/j.ijplas.2006.11.003 Pham, 2008, On shakedown theory for elastic-plastic materials and extensions, J Mech Phys Solids, 56, 1905, 10.1016/j.jmps.2007.11.005 Pham, 2010, Shakedown working limits for circular shafts and helical springs subjected to dynamic fluctuating loads, J Mech Mater Struct, 5, 447, 10.2140/jomms.2010.5.447 Pham, 2013, Shakedown, 3069 Pham, 2014, Reduced shakedown formulation in plane stress problems, Int J Comp Methods Sing, 11, 1343009, 10.1142/S0219876213430093 Weichert, 2002 Weichert, 2012, Shakedown analysis with multidimensional loading spaces, Comput Mech, 49, 477, 10.1007/s00466-011-0656-8 Nguyen, 2003, On shakedown analysis in hardening plasticity, J Mech Phys Solids, 51, 101, 10.1016/S0022-5096(02)00058-3 Peigney, 2014, Shakedown of elastic-perfectly plastic materials with temperature-dependent elastic moduli, J Mech Phys Solids, 71, 10.1016/j.jmps.2014.06.008 Liu, 2005, Lower bounds shakedown analysis by the symmetric Galerkin boundary element method, Int J Plast, 21, 21, 10.1016/j.ijplas.2004.01.003 Magoariec, 2004, Elastic plastic shakedown of 3D periodic heterogeneous media, Int J Plast, 20, 1655, 10.1016/j.ijplas.2003.11.011 Simon, 2013, Direct evaluation of the limit states of engineering structures exhibiting limited, nonlinear kinematical hardening, Int J Plast, 42, 141, 10.1016/j.ijplas.2012.10.008 Tran, 2014, Shakedown reduced kinematic formulation, separated collapse modes, and numerical implementation, Int J Solid Struct, 51, 2893, 10.1016/j.ijsolstr.2014.04.016 Gokhfeld DA. Some problems of shakedown of plates and shells. In: Proceedings of the VIth Soviet conference on plates shells, Nauka; 1966. p. 284–91. Gokhfeld DA, Cherniavski OF. Limit analysis of structures at thermal cycling. North-Holland, Amsterdam; 1980. Zhang, 2002, An eigen-mode method in kinematic shakedown analysis, Int J Plast, 18, 71, 10.1016/S0749-6419(00)00055-3 Zhang, 2002, Boundary element methods for lower bound limit and shakedown analysis, Eng Anal Bound Elem, 28, 905, 10.1016/S0955-7997(03)00117-6 An NT, Nam NM. A smoothing algorithm for the smallest intersecting ball problem. 2013. arXiv:1303.7247 [math.OC]. Belytschko, 1972, Plane stress shakedown analysis by finite elements, Int J Mech Sci, 14, 619, 10.1016/0020-7403(72)90061-6 Bisbos, 2005, Second order cone programming approaches to static shakedown analysis in steel plasticity, Optim Methods Softw, 20, 25, 10.1080/1055678042000216003 Bree, 1989, Plastic deformation of a closed tube due to interaction of pressure stresses and cyclic thermal stresses, Int J Mech Sci, 31, 865, 10.1016/0020-7403(89)90030-1 Ciria, 2008, Mesh adaptive computation of upper and lower bounds in limit analysis, Int J Numer Method Eng, 75, 899, 10.1002/nme.2275 Cheng, 2006, On the smallest enclosing balls, Commun Inf Syst, 6, 137, 10.4310/CIS.2006.v6.n2.a3 Garcea, 2005, Finite element shakedown analysis of two-dimensional structures, Int J Numer Method Eng, 63, 1174, 10.1002/nme.1316 Gross-Weege, 1997, On the numerical assessment of the safety factor of elastic–plastic structures under variable loading, Int J Mech Sci, 39, 417, 10.1016/S0020-7403(96)00039-2 Krabbenhoft, 2007, Formulation and solution of some plasticity problems as conic programs, Int J Solids Struct, 10.1016/j.ijsolstr.2006.06.036 Le, 2009, Limit analysis of plates using the EFG method and second-order cone programming, Int J Numer Method Eng, 78, 1532, 10.1002/nme.2535 Le, 2013, A stabilized discrete shear gap finite element for adaptive limit analysis of Mindlin–Reissner plates, Int J Numer Method Eng, 96, 231 Tran, 2015, Extended finite element method for plastic limit load computation of cracked structures, Int J Numer Method Eng, 104, 2, 10.1002/nme.4922 Bleyer, 2015, Locking-free discontinuous finite elements for the upper bound yield design of thick plates, Int J Numer Method Eng, 103, 894, 10.1002/nme.4912 Li, 2006, A non-linear programming approach to kinematic shakedown analysis of frictional materials, Int J Solids Struct, 43, 6594, 10.1016/j.ijsolstr.2006.01.009 Nam, 2012, Applications of convex analysis to the smallest intersecting ball problem, J Convex Anal, 19, 497 Makrodimopoulos, 2006, Computational formulation of shakedown analysis as a conic quadratic optimization problem, Mech Res Commun, 33, 72, 10.1016/j.mechrescom.2004.10.014 Munoz, 2009, Upper and lower bounds in limit analysis, Int J Numer Method Eng, 77, 471, 10.1002/nme.2421 Vu, 2004, A dual form for discretized kinematic formulation in shakedown analysis, Int J Solids Struct, 41, 267, 10.1016/j.ijsolstr.2003.08.013 Zouain, 2002, An algorithm for shakedown analysis with nonlinear yield functions, Comput Methods Appl Mech Eng, 191, 2463, 10.1016/S0045-7825(01)00374-7