Room temperature roll-to-roll additive manufacturing of polydimethylsiloxane-based centrifugal microfluidic device for on-site isolation of ribonucleic acid from whole blood

Wei, 2018, Multiplexed instrument-free bar-chart SpinChip integrated with nanoparticle-mediated magnetic aptasensors for visual quantitative detection of multiple pathogens, Anal. Chem., 90, 10.1021/acs.analchem.8b02055 Dou, 2017, A paper/polymer hybrid CD-like microfluidic SpinChip integrated with DNA-functionalized graphene oxide nanosensors for multiplex qLAMP detection, Chem. Commun., 53, 10.1039/C7CC03246C Dou, 2015, Low-cost bioanalysis on paper-based and its hybrid microfluidic platforms, Talanta, 145, 10.1016/j.talanta.2015.04.068 Tavakoli, 2019, Recent advances in microfluidic platforms for single-cell analysis in cancer biology, diagnosis and therapy, TrAC, Trends Anal. Chem., 117, 10.1016/j.trac.2019.05.010 Hu, 2019, Rapid isolation of cfDNA from large-volume whole blood on a centrifugal microfluidic chip based on immiscible phase filtration, Analyst, 144, 4162, 10.1039/C9AN00493A Noroozi, 2011, A multiplexed immunoassay system based upon reciprocating centrifugal microfluidics, Rev. Sci. Instrum., 82, 10.1063/1.3597578 Gorkin, 2010, Centrifugal microfluidics for biomedical applications, Lab Chip, 10, 10.1039/b924109d Michael, 2016, Challenges and opportunities of centrifugal microfluidics for extreme point-of-care testing, Micromachines, 7, 10.3390/mi7020032 Kim, 2016, A lab-on-a-disc with reversible and thermally stable diaphragm valves, Lab Chip, 16, 10.1039/C6LC00629A Aeinehvand, 2015, Reversible thermo-pneumatic valves on centrifugal microfluidic platforms, Lab Chip, 15, 10.1039/C5LC00634A Mortazavi, 2017, Efficient batch-mode mixing and flow patterns in a microfluidic centrifugal platform: a numerical and experimental study, Microsyst. Technol., 23, 10.1007/s00542-016-3109-7 Thompson, 2015, Inexpensive, rapid prototyping of microfluidic devices using overhead transparencies and a laser print, cut and laminate fabrication method, Nat. Protoc., 10, 10.1038/nprot.2015.051 Hosseini, 2015, Microsphere integrated microfluidic disk: synergy of two techniques for rapid and ultrasensitive dengue detection, Sci. Rep., 5, 10.1038/srep16485 Duffy, 2017, New strategies for stationary phase integration within centrifugal microfluidic platforms for applications in sample preparation and pre-concentration, Anal. Methods, 9, 10.1039/C7AY00127D Xia, 1998, Soft lithography, Annu. Rev. Mater. Sci., 28, 153, 10.1146/annurev.matsci.28.1.153 Whitesides, 2006, The origins and the future of microfluidics, Nature, 442, 368, 10.1038/nature05058 Gervais, 2011, Microfluidic chips for point-of-care immunodiagnostics, Adv. Mater., 23 Chin, 2012, Commercialization of microfluidic point-of-care diagnostic devices, Lab Chip, 12, 10.1039/c2lc21204h Hiltunen, 2018, Roll-to-roll fabrication of integrated PDMS-paper microfluidics for nucleic acid amplification, Lab Chip, 18, 10.1039/C8LC00269J Sackmann, 2014, The present and future role of microfluidics in biomedical research, Nature, 507, 10.1038/nature13118 Kooy, 2014, A review of roll-to-roll nanoimprint lithography | nanoscale research letters | full text, Nanoscale Res. Lett., 9, 10.1186/1556-276X-9-320 Ahn, 2008, High-speed roll-to-roll nanoimprint lithography on flexible plastic substrates, Adv. Mater., 20 Hirai, 2003, Defect analysis in thermal nanoimprint lithography, J. Vac. Sci. Technol. B: Microelectronics and Nanometer Structures, 21 Chan, 2015, Direct, one-step molding of 3D-printed structures for convenient fabrication of truly 3D PDMS microfluidic chips, Microfluid. Nanofluidics, 19, 10.1007/s10404-014-1542-4 Comina, 2014, PDMS lab-on-a-chip fabrication using 3D printed templates, Lab Chip, 14, 10.1039/C3LC50956G Chen, 2013, Conformal coating of parylene for surface anti-adhesion in polydimethylsiloxane (PDMS) double casting technique, Sens Actuators A Phys, 189, 10.1016/j.sna.2012.09.024 Brounstein, 2021, Long-term thermal aging of modified Sylgard 184 formulations, Polymers, 13, 10.3390/polym13183125 Pina-Hernandez, 2007, High-throughput and etch-selective nanoimprinting and stamping based on fast-thermal-curing poly(dimethylsiloxane)s, Adv. Mater., 19, 10.1002/adma.200601905 Guler, 2017, A versatile plug microvalve for microfluidic applications, Sens Actuators A Phys, 265, 224, 10.1016/j.sna.2017.09.001 Kim, 2013, Geometry effects on blood separation rate on a rotating disc, Sensor. Actuator. B Chem., 178, 10.1016/j.snb.2013.01.011 Kim, 2018, Fully automated, on-site isolation of cfDNA from whole blood for cancer therapy monitoring, Lab Chip, 18, 10.1039/C8LC00165K Clark, 2018, Mixing enhancement in serpentine micromixers with a non-rectangular cross-section, Micromachines, 9, 10.3390/mi9030107 Lee, 2022, Enhancing mixing performance in a rotating disk mixing chamber: a quantitative investigation of the effect of euler and coriolis forces, Micromachines, 13, 10.3390/mi13081218 Park, 2007, Multifunctional microvalves control by optical illumination on nanoheaters and its application in centrifugal microfluidic devices, Lab Chip, 7, 10.1039/b616112j Murphy, 2020, Tailoring properties and processing of Sylgard 184: curing time, adhesion, and water affinity, J. Appl. Polym. Sci., 137, 10.1002/app.48530 Antosik, 2018, Aging of silicone pressure-sensitive adhesives, Polym. Bull., 75, 10.1007/s00289-017-2083-2 McIntosh, 2009 Cifter, 2019, In vitro study of effects of aging and processing conditions on colour change in maxillofacial silicone elastomers, BMC Oral Health, 19, 10.1186/s12903-019-0798-1 Gary, 1998, Pigments and their application in maxillofacial elastomers: a literature review, J. Prosthet. Dent, 80, 10.1016/S0022-3913(98)70111-8 Thompson, 2013, Adhesive-based bonding technique for PDMS microfluidic devices, Lab Chip, 13, 632, 10.1039/c2lc40978j