Rolling element bearing diagnostics—A tutorial

McFadden, 1984, Model for the vibration produced by a single point defect in a rolling element bearing, Journal of Sound and Vibration, 96, 69, 10.1016/0022-460X(84)90595-9

P. Bradshaw, R.B. Randall, Early detection and diagnosis of machine faults on the Trans Alaska pipeline, in: Proceedings of the MSA Session, ASME Conference, Dearborn MI, September, 1983.

Balderston, 1969, The detection of incipient failure in bearings, Material Evaluation, 27, 121

B. Weichbrodt, K.A. Smith, Signature analysis—non-intrusive techniques for incipient failure identification. General Electric Technical Information Series 70-C-364, 1970.

Braun, 1975, The extraction of periodic waveforms by time domain averaging, Acoustica, 23, 69

Braun, 1979, Analysis of roller/ball bearings, ASME Transactions, Journal of Design, 101, 118, 10.1115/1.3454009

M.S. Darlow, R.H. Badgley, G.W. Hogg, Application of high frequency resonance techniques for bearing diagnostics in helicopter gearboxes, Technical Report, US Army Air Mobility Research and Development Laboratory, 1974, pp. 74–77.

Engja, 1977, Vibration analysis used for detection of rolling element bearing failures, Norwegian Maritime Research, 3, 23

K. Worden, W.J. Staszewski, J.J. Hensman, Natural computing for mechanical systems research: a tutorial overview, Mechanical Systems and Signal Processing, 2010.

Antoni, 2007, Cyclic spectral analysis in practice, Mechanical Systems and Signal Processing, 21, 597, 10.1016/j.ymssp.2006.08.007

Antoni, 2009, Cyclostationarity by examples, Mechanical Systems and Signal Processing, 23, 987, 10.1016/j.ymssp.2008.10.010

McCormick, 1998, Cyclostationarity in rotating machine vibrations, Mechanical Systems and Signal Processing, 12, 225, 10.1006/mssp.1997.0148

Randall, 2001, The relationship between spectral correlation and envelope analysis in the diagnostics of bearing faults and other cyclostationary machine signals, Mechanical Systems and Signal Processing, 15, 945, 10.1006/mssp.2001.1415

Antoni, 2002, Differential diagnosis of gear and bearing faults, ASME Journal of Vibration and Acoustics, 124, 165, 10.1115/1.1456906

Antoni, 2003, A stochastic model for simulation and diagnostics of rolling element bearings with localised faults, ASME Journal of Vibration and Acoustics, 125, 282, 10.1115/1.1569940

Kay, 1981, Spectrum analysis—a modern perspective, Proceedings of the IEEE, 69, 1380, 10.1109/PROC.1981.12184

Widrow, 1985

Chaturvedi, 1982, Bearing fault detection using adaptive noise cancelling, Journal of Sound and Vibration, 104, 280

C.C. Tan, B. Dawson, An adaptive noise cancellation approach for condition monitoring of gearbox bearings, in: Proceedings of the International Tribology Conference, Melbourne, 1987.

D. Ho, Bearing Diagnostics and self adaptive noise cancellation, Ph.D. Dissertation, UNSW, 2000.

D. Ho, R.B. Randall, Effects of time delay, order of fir filter and convergence factor on self adaptive noise cancellation, ICSV5, Adelaide, 1997.

Antoni, 2004, Unsupervised noise cancellation for vibration signals: part I—evaluation of adaptive algorithms, Mechanical Systems and Signal Processing, 18, 89, 10.1016/S0888-3270(03)00012-8

J. Antoni, R.B. Randall, Optimisation of SANC for separating gear and bearing signals, in: Proceedings of the Comadem Conference, Manchester, September, 2001, pp. 89–96.

Antoni, 2004, Unsupervised noise cancellation for vibration signals: part II—a novel frequency-domain algorithm, Mechanical Systems and Signal Processing, 18, 103, 10.1016/S0888-3270(03)00013-X

McFadden, 1987, A revised model for the extraction of periodic waveforms by time domain averaging, Mechanical Systems and Signal Processing, 1, 83, 10.1016/0888-3270(87)90085-9

N. Sawalhi, R.B. Randall, Localised fault diagnosis in rolling element bearings in gearboxes, in: Proceedings of the Fifth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM-MFPT), Edinburgh, 15–18 July 2008.

S. Braun, The synchronous (time domain) average revisited, Mechanical Systems and Signal Processing, 2010.

Wiggins, 1978, vol. 16

Endo, 2007, Application of a minimum entropy deconvolution filter to enhance autoregressive model based gear tooth fault detection technique, Mechanical Systems and Signal Processing, 21, 906, 10.1016/j.ymssp.2006.02.005

Sawalhi, 2007, The enhancement of fault detection and diagnosis in rolling element bearings using minimum entropy deconvolution combined with spectral kurtosis, Mechanical Systems and Signal Processing, 21, 2616, 10.1016/j.ymssp.2006.12.002

Lee, 1999, Extraction of impacting signals using blind deconvolution, Journal of Sound and Vibration, 232, 945, 10.1006/jsvi.1999.2778

R.F. Dwyer, Detection of non-Gaussian signals by frequency domain kurtosis estimation, in: Proceedings of the International Conference on Acoustics, Speech, and Signal Processing, Boston, 1983, pp. 607–610.

D. Dyer, R.M. Stewart, Detection of rolling element bearing damage by statistical vibration analysis, ASME Paper, 26–30 September, 1977.

Antoni, 2006, The spectral kurtosis: a useful tool for characterising nonstationary signals, Mechanical Systems and Signal Processing, 20, 282, 10.1016/j.ymssp.2004.09.001

Antoni, 2006, The spectral kurtosis: application to the vibratory surveillance and diagnostics of rotating machines, Mechanical Systems and Signal Processing, 20, 308, 10.1016/j.ymssp.2004.09.002

N. Sawalhi, R.B. Randall, Spectral kurtosis enhancement using autoregressive models, in: Proceedings of the ACAM2005 Conference, Melbourne, February, 2005.

Antoni, 2006, Fast computation of the kurtogram for the detection of transient faults, Mechanical Systems and Signal Processing, 21, 108, 10.1016/j.ymssp.2005.12.002

N. Sawalhi, R.B. Randall, spectral kurtosis optimization for rolling element bearings, in: Proceedings of the ISSPA Conference, Sydney, Australia, August, 2005.

Newland, 2007, Wavelet analysis of vibration signals

Daubechies, 1990, The wavelet transform, time–frequency localization and signal analysis, IEEE Transactions on Information Theory, 36, 961, 10.1109/18.57199

Peng, 2004, Application of the wavelet transform in machine condition monitoring and fault diagnostics: a review with bibliography, Mechanical Systems and Signal Processing, 18, 199, 10.1016/S0888-3270(03)00075-X

Donoho, 1994, Ideal spatial adaptation by wavelet shrinkage, Biometrika, 81, 425, 10.1093/biomet/81.3.425

Y. Wang, Z. He, Y. Zi, Enhancement of signal denoising and multiple fault signatures detecting in rotating machinery using dual-tree complex wavelet transform, Mechanical Systems and Signal Processing 24 (2009) 119–137. 10.1016/j.ymssp.2009.06.015.

Randall, 2007, Noise and vibration data analysis

Bonnardot, 2004, Enhanced unsupervised noise cancellation using angular resampling for planetary bearing fault diagnosis, International Journal of Acoustics and Vibration, 9, 10.20855/ijav.2004.9.2156

Ho, 2000, Optimisation of bearing diagnostic techniques using simulated and actual bearing fault signals, Mechanical Systems and Signal Processing, 14, 763, 10.1006/mssp.2000.1304

N. Sawalhi, R.B. Randall, Semi-automated bearing diagnostics—three case studies, in: Proceedings of the Comadem Conference, Faro, Portugal, June 2007.

J. Antoni, On the benefits of the Wigner–Ville spectrum for analysing certain types of vibration signals, in: Proceedings of the Wespac8 Conference, Melbourne, 2003.

McFadden, 1989, Interpolation techniques for time domain averaging of gear vibration, Mechanical Systems and Signal Processing, 3, 87, 10.1016/0888-3270(89)90024-1

R. Potter, M. Gribler, Computed order tracking obsoletes older methods, SAE Paper 891131, 1989.

Gade, 1995, Order tracking analysis, Brüel & Kjær Technical Review, 2, 1995