Role of micro-dimple array geometry on the biological and tribological performance of Ti6Al4V for biomedical applications

Nasab, 2010, Metallic biomaterials of knee and hip—a review, Trends Biomater. Artif. Organs, 24, 69 Bozic, 2010, The epidemiology of revision total knee arthroplasty in the United States, Clin. Orthop. Relat. Res., 468, 45, 10.1007/s11999-009-0945-0 Niinomi, 1998, Mechanical properties of biomedical titanium alloys, Mater. Sci. Eng. A, 243, 231, 10.1016/S0921-5093(97)00806-X Poondla, 2009, A study of the microstructure and hardness of two titanium alloys: commercially pure and Ti–6Al–4V, J. Alloys Compd., 486, 162, 10.1016/j.jallcom.2009.06.172 Dong, 2000, Enhanced wear resistance of titanium surfaces by a new thermal oxidation treatment, Wear, 238, 131, 10.1016/S0043-1648(99)00359-2 Molinari, 1997, Dry sliding wear mechanisms of the Ti6Al4V alloy, Wear, 208, 105, 10.1016/S0043-1648(96)07454-6 Holmberg, 1994 Hanawa, 2001, Metallic biomaterials in body fluid and their surface modification, 145 Peterson, 1988, Component wear of total knee prostheses using Ti-6Al-4V, titanium nitride coated Ti-6Al-4V, and cobalt-chromium-molybdenum femoral components, J. Biomed. Mater. Res. A, 22, 887, 10.1002/jbm.820221005 Dong, 1997, Surface engineering to improve tribological performance of Ti–6Al–4V, Surf. Eng., 13, 402, 10.1179/sur.1997.13.5.402 Bansal, 2011, Surface engineering to improve the durability and lubricity of Ti–6Al–4V alloy, Wear, 271, 2006, 10.1016/j.wear.2010.11.021 Pfleging, 2015, Laser surface textured titanium alloy (Ti–6Al–4V): part 1–surface characterization, Appl. Surf. Sci., 355, 104, 10.1016/j.apsusc.2015.06.175 Bagno, 2004, Surface treatments and roughness properties of ti-based biomaterials, J. Mater. Sci. Mater. Med., 15, 935, 10.1023/B:JMSM.0000042679.28493.7f Grizon, 2002, Enhanced bone integration of implants with increased surface roughness: a long term study in the sheep, J. Dent., 30, 195, 10.1016/S0300-5712(02)00018-0 Kurella, 2005, Surface modification for bioimplants: the role of laser surface engineering, J. Biomater. Appl., 20, 5, 10.1177/0885328205052974 Biswas, 2007, Laser surface treatment of Ti-6Al-4V for bio-implant application, Lasers Eng., 17, 59 Etsion, 2005, State of the art in laser surface texturing, Trans. ASME F J. Tribol., 127, 248, 10.1115/1.1828070 Chen, 2009, An investigation of the initial attachment and orientation of osteoblast-like cells on laser grooved Ti-6Al-4V surfaces, Mater. Sci. Eng. C, 29, 1442, 10.1016/j.msec.2008.11.014 Yu, 2011, The effect of dimple shapes on friction of parallel surfaces, Proc. Inst. Mech. Eng. Part J: J. Eng. Tribol., 225, 693, 10.1177/1350650111406045 Kumari, 2015, Laser surface textured titanium alloy (Ti–6Al–4V)–part II–studies on bio-compatibility, Appl. Surf. Sci., 357, 750, 10.1016/j.apsusc.2015.08.255 Hu, 2012, Effective solution for the tribological problems of Ti-6Al-4V: combination of laser surface texturing and solid lubricant film, Surf. Coat. Technol., 206, 5060, 10.1016/j.surfcoat.2012.06.014 Qin, 2015, Tribological properties of laser surface textured and plasma electrolytic oxidation duplex-treated Ti6Al4V alloy deposited with MoS2 film, Surf. Coat. Technol., 269, 266, 10.1016/j.surfcoat.2014.12.003 Mirhosseini, 2007, Laser surface micro-texturing of Ti–6Al–4V substrates for improved cell integration, Appl. Surf. Sci., 253, 7738, 10.1016/j.apsusc.2007.02.168 Amanov, 2013, The influence of bulges produced by laser surface texturing on the sliding friction and wear behavior, Tribol. Int., 60, 216, 10.1016/j.triboint.2012.10.018 Duisabeau, 2004, Environmental effect on fretting of metallic materials for orthopaedic implants, Wear, 256, 805, 10.1016/S0043-1648(03)00522-2 Golafshan, 2017, Tough and conductive hybrid graphene-PVA: alginate fibrous scaffolds for engineering neural construct, Carbon, 111, 752, 10.1016/j.carbon.2016.10.042 Dahotre, 2010, Wetting behaviour of laser synthetic surface microtextures on Ti–6Al–4V for bioapplication, Philos. Trans. R. Soc. Lond. A: Math. Phys. Eng. Sci., 368, 1863, 10.1098/rsta.2010.0003 Chikarakara, 2012 Kumar, 2006, Process parameters influencing melt profile and hardness of pulsed laser treated Ti–6Al–4V, Surf. Coat. Technol., 201, 3174, 10.1016/j.surfcoat.2006.06.035 Singh, 2011, Electrochemical and mechanical behavior of laser processed Ti–6Al–4V surface in ringer's physiological solution, J. Mater. Sci. Mater. Med., 22, 1787, 10.1007/s10856-011-4362-z Singh, 2006, Laser surface modification of Ti—6Al—4V: wear and corrosion characterization in simulated biofluid, J. Biomater. Appl., 21, 49, 10.1177/0885328206055998 Cunha, 2015 Cunha, 2013, Wetting behaviour of femtosecond laser textured Ti–6Al–4V surfaces, Appl. Surf. Sci., 265, 688, 10.1016/j.apsusc.2012.11.085 Hao, 2007, Wettability modification and the subsequent manipulation of protein adsorption on a Ti6Al4V alloy by means of CO2 laser surface treatment, J. Mater. Sci. Mater. Med., 18, 807, 10.1007/s10856-006-0002-4 Boyan, 1996, Role of material surfaces in regulating bone and cartilage cell response, Biomaterials, 17, 137, 10.1016/0142-9612(96)85758-9 Altankov, 1996, Studies on the biocompatibility of materials: fibroblast reorganization of substratum-bound fibronectin on surfaces varying in wettability, J. Biomed. Mater. Res. A, 30, 385, 10.1002/(SICI)1097-4636(199603)30:3<385::AID-JBM13>3.0.CO;2-J Lee, 2004, Attachment and proliferation of neonatal rat calvarial osteoblasts on Ti6Al4V: effect of surface chemistries of the alloy, Biomaterials, 25, 23, 10.1016/S0142-9612(03)00465-4 Straffelini, 1999, Dry sliding wear of Ti–6Al–4V alloy as influenced by the counterface and sliding conditions, Wear, 236, 328, 10.1016/S0043-1648(99)00292-6 Baker, 2010, Laser surface modification of titanium alloys, 398 Mosleh, 1996, Wear particles of polyethylene in biological systems, Tribol. Trans., 39, 843, 10.1080/10402009608983603 Mosleh, 2004, Characteristics and morphology of wear particles from laboratory testing of disk brake materials, Wear, 256, 1128, 10.1016/j.wear.2003.07.007