Risks and complications of miniscrew anchorage in clinical orthodontics

Creekmore, 1983, The possibility of skeletal anchorage, J Clin Orthod, 17, 266 Roberts, 1990, Rigid endosseous implant utilized as anchorage to protract molars and close an atrophic extraction site, Angle Orthod, 60, 135 Kanomi, 1997, Mini-implant for orthodontic anchorage, J Clin Orthod, 31, 763 Umemori, 1999, Skeletal anchorage system for open-bite correction, Am J Orthod Dentofacial Orthop, 115, 166, 10.1016/S0889-5406(99)70345-8 Kyung, 2003, Development of orthodontic micro-implants for intraoral anchorage, J Clin Orthod, 37, 321 Fukunaga, 2006, Skeletal anchorage for orthodontic correction of maxillary protrusion with adult periodontitis, Angle Orthod, 76, 148 Sakai, 2008, Skeletal Class III severe openbite treatment using implant anchorage, Angle Orthod, 78, 157, 10.2319/103006-445.1 Mah, 2005, Temporary anchorage devices: a status report, J Clin Orthod, 39, 132 Wilmes, 2008, Impact of implant design on primary stability of orthodontic mini-implants, J Orofac Orthop, 69, 42, 10.1007/s00056-008-0727-4 Kuroda, 2007, Clinical use of miniscrew implants as orthodontic anchorage: success rates and postoperative discomfort, Am J Orthod Dentofacial Orthop, 131, 9, 10.1016/j.ajodo.2005.02.032 Kuroda, 2014, Interdisciplinary treatment of a nonsyndromic oligodontia patient with implant-anchored orthodontics, Am J Orthod Dentofacial Orthop, 145, S136, 10.1016/j.ajodo.2013.06.023 Ishihara, 2014, Long-term stability of implant-anchored orthodontics in an adult patient with a Class II Division 2 malocclusion and a unilateral molar scissors-bite, Am J Orthod Dentofacial Orthop, 145, S100, 10.1016/j.ajodo.2013.07.016 Ishihara, 2013, Indirect usage of miniscrew anchorage to intrude overerupted mandibular incisors in a Class II patient with a deep overbite, Am J Orthod Dentofacial Orthop, 143, S113, 10.1016/j.ajodo.2012.09.001 Tanaka, 2012, Management of acquired open bite associated with temporomandibular joint osteoarthritis using miniscrew anchorage, Korean J Orthod, 42, 144, 10.4041/kjod.2012.42.3.144 Ishihara, 2013, Extraction of the lateral incisors to treat maxillary protrusion: quantitative evaluation of the stomatognathic functions, Angle Orthod, 83, 341, 10.2319/042412-343.1 Kuroda, 2011, Application of temporary anchorage devices for the treatment of adult Class III malocclusions, Semin Orthod, 17, 91, 10.1053/j.sodo.2010.12.002 Yanagita, 2011, Class III malocclusion with complex problems of lateral open bite and severe crowding successfully treated with miniscrew anchorage and lingual orthodontic brackets, Am J Orthod Dentofacial Orthop, 139, 679, 10.1016/j.ajodo.2009.07.023 Deguchi, 2011, Comparison of orthodontic treatment outcomes in adults with skeletal open bite between conventional edgewise treatment and implant-anchored orthodontics, Am J Orthod Dentofacial Orthop, 139, S60, 10.1016/j.ajodo.2009.04.029 Ohura, 2011, Efficient usage of implant anchorage to treat overerupted maxillary first molar and mesially inclined mandibular molars, Am J Orthod Dentofacial Orthop, 139, 113, 10.1016/j.ajodo.2009.05.025 Hashimoto, 2009, Mandibular deviation and canted maxillary occlusal plane treated with miniscrews and intraoral vertical ramus osteotomy: functional and morphologic changes, Am J Orthod Dentofacial Orthop, 136, 868, 10.1016/j.ajodo.2007.06.022 Takano-Yamamoto, 2009, Diagnosis and therapy of adult patients with facial asymmetry, Orthod Fr, 80, 313, 10.1051/orthodfr/2009022 Tamamura, 2009, Use of palatal miniscrew anchorage and lingual multi-bracket appliances to enhance efficiency of molar scissors-bite correction, Angle Orthod, 79, 577, 10.2319/031708-152.1 Hashimoto, 2009, Bimaxillary protrusion with masseter muscle hypertrophy treated with titanium screw anchorage and masseter surgical reduction, Am J Orthod Dentofacial Orthop, 135, 536, 10.1016/j.ajodo.2006.10.043 Kuroda, 2009, Class II malocclusion treated with miniscrew anchorage: comparison with traditional orthodontic mechanics outcomes, Am J Orthod Dentofacial Orthop, 135, 302, 10.1016/j.ajodo.2007.03.038 Yamada, 2009, Distal movement of maxillary molars using miniscrew anchorage in the buccal interradicular region, Angle Orthod, 79, 78, 10.2319/020408-68.1 Deguchi, 2008, Comparison of the intrusion effects on the maxillary incisors between implant anchorage and J-hook headgear, Am J Orthod Dentofacial Orthop, 133, 654, 10.1016/j.ajodo.2006.04.047 Sugawara, 2008, Adult patient with mandibular protrusion and unstable occlusion treated with titanium screw anchorage, Am J Orthod Dentofacial Orthop, 133, 102, 10.1016/j.ajodo.2006.06.020 Kuroda, 2007, Treatment of severe anterior open bite with skeletal anchorage in adults: comparison with orthognathic surgery outcomes, Am J Orthod Dentofacial Orthop, 132, 599, 10.1016/j.ajodo.2005.11.046 Takano-Yamamoto, 2007, Titanium screw anchorage for correction of canted occlusal plane in patients with facial asymmetry, Am J Orthod Dentofacial Orthop, 132, 237, 10.1016/j.ajodo.2005.12.032 Kuroda, 2007, Titanium screw anchorage for traction of many impacted teeth in a patient with cleidocranial dysplasia, Am J Orthod Dentofacial Orthop, 131, 666, 10.1016/j.ajodo.2005.06.026 Kuroda, 2007, Anterior open bite with temporomandibular disorder treated with titanium screw anchorage: evaluation of morphological and functional improvement, Am J Orthod Dentofacial Orthop, 131, 550, 10.1016/j.ajodo.2006.12.001 Kuroda, 2005, Skeletal Class III oligodontia patient treated with titanium screw anchorage and orthognathic surgery, Am J Orthod Dentofacial Orthop, 127, 730, 10.1016/j.ajodo.2004.05.020 Kuroda, 2004, Severe anterior open-bite case treated using titanium screw anchorage, Angle Orthod, 74, 558 Kravitz, 2007, Risks and complications of orthodontic miniscrews, Am J Orthod Dentofacial Orthop, 131, S43, 10.1016/j.ajodo.2006.04.027 Suzuki, 2011, Placement and removal torque values of orthodontic miniscrew implants, Am J Orthod Dentofacial Orthop, 139, 669, 10.1016/j.ajodo.2010.11.017 Papageorgiou, 2012, Failure rates and associated risk factors of orthodontic miniscrew implants: a meta-analysis, Am J Orthod Dentofacial Orthop, 142, 577, 10.1016/j.ajodo.2012.05.016 Motoyoshi, 2006, Recommended placement torque when tightening an orthodontic mini-implant, Clin Oral Implants Res, 17, 109, 10.1111/j.1600-0501.2005.01211.x Meursinge Reynders, 2012, Insertion torque and success of orthodontic mini-implants: a systematic review, Am J Orthod Dentofacial Orthop, 142, 596, 10.1016/j.ajodo.2012.06.013 Lee, 2009, Computed tomographic analysis of tooth-bearing alveolar bone for orthodontic miniscrew placement, Am J Orthod Dentofacial Orthop, 135, 486, 10.1016/j.ajodo.2007.05.019 Kang, 2007, Bone thickness of the palate for orthodontic mini-implant anchorage in adults, Am J Orthod Dentofacial Orthop, 131, S74, 10.1016/j.ajodo.2005.09.029 Moon, 2008, Factors associated with the success rate of orthodontic miniscrews placed in the upper and lower posterior buccal region, Angle Orthod, 78, 101, 10.2319/121706-515.1 Chen, 2007, A retrospective analysis of the failure rate of three different orthodontic skeletal anchorage systems, Clin Oral Implants Res, 18, 768, 10.1111/j.1600-0501.2007.01405.x Park, 2006, Factors affecting the clinical success of screw implants used as orthodontic anchorage, Am J Orthod Dentofacial Orthop, 130, 18, 10.1016/j.ajodo.2004.11.032 Wu, 2009, Factors associated with the stability of mini-implants for orthodontic anchorage: a study of 414 samples in Taiwan, J Oral Maxillofac Surg, 67, 1595, 10.1016/j.joms.2009.04.015 Cheng, 2004, A prospective study of the risk factors associated with failure of mini-implants used for orthodontic anchorage, Int J Oral Maxillofac Implants, 19, 100 Shah, 2012, Effects of screw and host factors on insertion torque and pullout strength, Angle Orthod, 82, 603, 10.2319/070111-427.1 Ozdemir, 2013, Cortical bone thickness of the alveolar process measured with cone-beam computed tomography in patients with different facial types, Am J Orthod Dentofacial Orthop, 143, 190, 10.1016/j.ajodo.2012.09.013 Chen, 2010, Mechanical properties of self-drilling orthodontic microimplants with different diameters, Angle Orthod, 80, 821, 10.2319/103009-607.1 Lee, 2010, Effects of the diameter and shape of orthodontic mini-implants on microdamage to the cortical bone, Am J Orthod Dentofacial Orthop, 138, e1, 10.1016/j.ajodo.2010.02.019 Chen, 2009, Critical factors for the success of orthodontic mini-implants: a systematic review, Am J Orthod Dentofacial Orthop, 135, 284, 10.1016/j.ajodo.2007.08.017 Song, 2007, Mechanical characteristics of various orthodontic mini-screws in relation to artificial cortical bone thickness, Angle Orthod, 77, 979, 10.2319/090606-363.1 Kim, 2008, Comparison of stability between cylindrical and conical type mini-implants, Angle Orthod, 78, 692, 10.2319/0003-3219(2008)078[0692:COSBCA]2.0.CO;2 Çehreli, 2012, Primary stability and histomorphometric bone-implant contact of self-drilling and self-tapping orthodontic microimplants, Am J Orthod Dentofacial Orthop, 141, 187, 10.1016/j.ajodo.2011.07.020 Chen, 2008, Biomechanical and histological comparison of self-drilling and self-tapping orthodontic microimplants in dogs, Am J Orthod Dentofacial Orthop, 133, 44, 10.1016/j.ajodo.2007.01.023 Wilmes, 2008, Insertion angle impact on primary stability of orthodontic mini-implants, Angle Orthod, 78, 1065, 10.2319/100707-484.1 Noble, 2009, Stress on bone from placement and removal of orthodontic miniscrews at different angulations, J Clin Orthod, 43, 332 Lin, 2013, Factorial analysis of variables affecting bone stress adjacent to the orthodontic anchorage mini-implant with finite element analysis, Am J Orthod Dentofacial Orthop, 143, 182, 10.1016/j.ajodo.2012.09.012 Yadav, 2012, Microdamage of the cortical bone during mini-implant insertion with self-drilling and self-tapping techniques: a randomized controlled trial, Am J Orthod Dentofacial Orthop, 141, 538, 10.1016/j.ajodo.2011.12.016 Kuroda, 2007, Root proximity is a major factor for screw failure in orthodontic anchorage, Am J Orthod Dentofacial Orthop, 131, S68, 10.1016/j.ajodo.2006.06.017 Asscherickx, 2008, Success rate of miniscrews relative to their position to adjacent roots, Eur J Orthod, 30, 330, 10.1093/ejo/cjn019 Jung, 2013, Placement angle effects on the success rate of orthodontic microimplants and other factors with cone-beam computed tomography, Am J Orthod Dentofacial Orthop, 143, 173, 10.1016/j.ajodo.2012.09.011 Alves, 2013, Root repair after contact with mini-implants: systematic review of the literature, Eur J Orthod, 35, 491, 10.1093/ejo/cjs025 Ahmed, 2012, Root damage and repair in patients with temporary skeletal anchorage devices, Am J Orthod Dentofacial Orthop, 141, 547, 10.1016/j.ajodo.2011.11.014 Schulte-Geers, 2012, Root trauma and tooth loss through the application of pre-drilled transgingival fixation screws, J Craniomaxillofac Surg, 40, e214, 10.1016/j.jcms.2011.10.022 Alves, 2012, Root damage associated with intermaxillary screws: a systematic review, Int J Oral Maxillofac Surg, 41, 1445, 10.1016/j.ijom.2012.05.019 Wehrbein, 1990, The effect of the maxillary sinus floor on orthodontic tooth movement, Fortschr Kieferorthop, 51, 345, 10.1007/BF02167543 Wehrbein, 1995, Human histologic tissue response after long-term orthodontic tooth movement, Am J Orthod Dentofacial Orthop, 107, 360, 10.1016/S0889-5406(95)70088-9 Daimaruya, 2003, Effects of maxillary molar intrusion on the nasal floor and tooth root using the skeletal anchorage system in dogs, Angle Orthod, 73, 158 Kuroda, 2013, Mechanical stress induces bone formation in the maxillary sinus in a short-term mouse model, Clin Oral Invest, 17, 131, 10.1007/s00784-012-0686-4 Kawaguchi, 2014, Questionnaire survey on pain and discomfort after insertion of orthodontic buccal miniscrews, palatal miniscrews and, orthodontic miniplates, Orthod Waves, 73, 1, 10.1016/j.odw.2013.09.001