Review on the Relationship Between Liquid Aerospace Fuel Composition and Their Physicochemical Properties
Tóm tắt
The development of advanced air transportation has raised new demands for high-performance liquid hydrocarbon fuels. However, the measurement of fuel properties is time-consuming, cost-intensive, and limited to the operating conditions. The physicochemical properties of aerospace fuels are directly influenced by chemical composition. Thus, a thorough investigation should be conducted on the inherent relationship between fuel properties and composition for the design and synthesis of high-grade fuels and the prediction of fuel properties in the future. This work summarized the effects of fuel composition and hydrocarbon molecular structure on the fuel physicochemical properties, including density, net heat of combustion (NHOC), low-temperature fluidity (viscosity and freezing point), flash point, and thermal-oxidative stability. Several correlations and predictions of fuel properties from chemical composition were reviewed. Additionally, we correlated the fuel properties with hydrogen/carbon molar ratios (nH/C) and molecular weight (M). The results from the least-square method implicate that the coupling of H/C molar ratio and M is suitable for the estimation of density, NHOC, viscosity and effectiveness for the design, manufacture, and evaluation of aviation hydrocarbon fuels.
Tài liệu tham khảo
Braun-Unkhoff M, Kathrotia T, Rauch B et al (2016) About the interaction between composition and performance of alternative jet fuels. CEAS Aeronaut J 7(1):83–94
Billingsley M, Edwards T, Shafer LM et al (2010) Extent and impacts of hydrocarbon fuel compositional variability for aerospace propulsion systems. In: Proceedings of the 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. Tennessee, USA: 6824
Vozka P, Kilaz G (2020) A review of aviation turbine fuel chemical composition-property relations. Fuel 268:117391
Elmalik EE, Raza B, Warrag S et al (2014) Role of hydrocarbon building blocks on gas-to-liquid derived synthetic jet fuel characteristics. Ind Eng Chem Res 53(5):1856–1865
Yang J, Xin Z, He QS et al (2019) An overview on performance characteristics of bio-jet fuels. Fuel 237:916–936
Luning Prak DJ, Romanczyk M, Wehde KE et al (2017) Analysis of catalytic hydrothermal conversion jet fuel and surrogate mixture formulation: components, properties, and combustion. Energy Fuels 31(12):13802–13814
Blakey S, Rye L, Wilson CW (2011) Aviation gas turbine alternative fuels: a review. Proc Combust Inst 33(2):2863–2885
Moses CA, Roets PNJ (2009) Properties, characteristics, and combustion performance of sasol fully synthetic jet fuel. J Eng Gas Turbines Power 10(1115/1):3028234
ASTM D7566-18 (2018) Standard specification for aviation turbine fuel containing synthesized hydrocarbons. ASTM International, Pennsylvania
ASTM D1655-18 (2018) Standard specification for aviation turbine fuels. ASTM International, Pennsylvania
Dukek WG (2011) Jet fuels. In: Kirk-Othmer Encyclopedia of Chemical Technology: Wiley, Hoboken, pp 1–31
Saldana DA, Starck L, Mougin P et al (2012) Prediction of density and viscosity of biofuel compounds using machine learning methods. Energy Fuels 26(4):2416–2426
Chi H, Li GQ, Guo YS et al (2013) Excess molar volume along with viscosity, flash point, and refractive index for binary mixtures of cis-decalin or trans-decalin with C9 to C11 n-alkanes. J Chem Eng Data 58(8):2224–2232
de Lorenzi L, Fermeglia M, Torriano G (1994) Densities and viscosities of 1,1,1-trichloroethane + paraffins and + cycloparaffins at 298.15 K. J Chem Eng Data 39(3):483–487
Geist JM, Cannon MR (1946) Viscosities of pure hydrocarbons. Ind Eng Chem Anal Ed 18(10):611–613
Jia TH, Gong S, Pan L et al (2020) Impact of deep hydrogenation on jet fuel oxidation and deposition. Fuel 264:116843
Chevalier JLE, Petrino PJ, Gaston-Bonhomme YH (1990) Viscosity and density of some aliphatic, cyclic, and aromatic hydrocarbons binary liquid mixtures. J Chem Eng Data 35(2):206–212
Edwards T, Maurice LQ (2001) Surrogate mixtures to represent complex aviation and rocket fuels. J Propuls Power 17(2):461–466
Al-Nuaimi IA, Bohra M, Selam M et al (2016) Optimization of the aromatic/paraffinic composition of synthetic jet fuels. Chem Eng Technol 39(12):2217–2228
Holley AT, Dong Y, Andac MG et al (2007) Ignition and extinction of non-premixed flames of single-component liquid hydrocarbons, jet fuels, and their surrogates. Proc Combust Inst 31(1):1205–1213
Nakakita K, Akihama K, Weissman W et al (2005) Effect of the hydrocarbon molecular structure in diesel fuel on the in-cylinder soot formation and exhaust emissions. Int J Engine Res 6(3):187–205
Zhang C, Hui X, Lin YZ et al (2016) Recent development in studies of alternative jet fuel combustion: progress, challenges, and opportunities. Renew Sustain Energy Rev 54:120–138
Wu ZY, Mao YB, Raza M et al (2019) Surrogate fuels for RP-3 kerosene formulated by emulating molecular structures, functional groups, physical and chemical properties. Combust Flame 208:388–401
Edwards T (2002) "Kerosene" fuels for aerospace propulsion—composition and properties. In: Proceedings of the 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Indianapolis, Indiana, USA
Zuber K, Bartl P (1989) Quality control of aviation fuels. 1. Automatic simulated distillation and calculation of the vapour pressure of JP-4 aviation fuel (AVTAG) using capillary gas chromatography. Fuel 68(5):659–663
Burger JL, Bruno TJ (2012) Application of the advanced distillation curve method to the variability of jet fuels. Energy Fuels 26(6):3661–3671
Bowden JN, Westbrook SR, LePera ME (1988) A survey of JP-8 and JP-5 properties. DTIC Document (Interim Report BFLRF No. 253). www.dtic.mil/dtic/tr/fulltext/u2/a207721.pdf. Accessed 24 May 2018
Lovestead TM, Bruno TJ (2009) A comparison of the hypersonic vehicle fuel JP-7 to the rocket propellants RP-1 and RP-2 with the advanced distillation curve method. Energy Fuels 23(7):3637–3644
Outcalt S, Laesecke A, Freund MB (2009) Density and speed of sound measurements of jet A and S-8 aviation turbine fuels. Energy Fuels 23(3):1626–1633
Lei Z, Lu CB, An GJ et al (2014) Comparative study on combustion and explosion characteristics of high flash point jet fuel. Procedia Eng 84:377–383
Irvine S, Schoettmer A, Bates R et al (2004) History of sulfur content effects on the thermal stability of RP-1 under heated conditions. 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Fort Lauderdale, Florida, USA:3879
Zhang XW, Pan L, Wang L et al (2018) Review on synthesis and properties of high-energy-density liquid fuels: hydrocarbons, nanofluids and energetic ionic liquids. Chem Eng Sci 180:95–125
Chung HS, Chen CSH, Kremer RA et al (1999) Recent developments in high-energy density liquid hydrocarbon fuels. Energy Fuels 13(3):641–649
Burdette GW, Lander HR, McCoy JR (1978) High-energy fuels for cruise missiles. J Energy 2(5):289–292
Pan L, Xie JJ, Nie GK et al (2020) Zeolite catalytic synthesis of high-performance jet-fuel-range spiro-fuel by one-pot Mannich–Diels–Alder reaction. AIChE J 66(1):e16789. https://doi.org/10.1002/aic.16789
Xie JJ, Zhang XW, Pan L et al (2017) Renewable high-density spiro-fuels from lignocellulose-derived cyclic ketones. Chem Commun 53(74):10303–10305
von R Schleyer P, (1957) A simple preparation of adamantane. J Am Chem Soc 79(12):3292
Fort RC, Schleyer PR (1964) Adamantane: consequences of the diamondoid structure. Chem Rev 64(3):277–300
Schwertfeger H, Fokin A, Schreiner P (2008) Diamonds are a chemist’s best friend: diamondoid chemistry beyond adamantane. Angew Chem Int Ed 47(6):1022–1036
Marchand AP (2003) CHEMISTRY: diamondoid hydrocarbons-delving into nature’s bounty. Science 299(5603):52–53
Dahl JE (2003) Isolation and structure of higher diamondoids, nanometer-sized diamond molecules. Science 299(5603):96–99
Bren VA, Dubonosov AD, Minkin VI et al (1991) Norbornadiene–quadricyclane: an effective molecular system for the storage of solar energy. Russ Chem Rev 60(5):451–469
Bach RD, Schilke IL, Schlegel HB (1996) The energetics of valence isomerization in the norbornadiene–quadricyclane system. J Org Chem 61(14):4845–4847
Dubonosov AD, Bren VA, Chernoivanov VA (2002) Norbornadiene–quadricyclane as an abiotic system for the storage of solar energy. Russ Chem Rev 71(11):917–927
Pan L, Feng R, Peng H et al (2014) A solar-energy-derived strained hydrocarbon as an energetic hypergolic fuel. RSC Adv 4(92):50998–51001
Simmons HE, Smith RD (1958) A new synthesis of cyclopropanes from olefins. J Am Chem Soc 80(19):5323–5324
Simmons HE, Smith RD (1959) A new synthesis of cyclopropanes 1. J Am Chem Soc 81(16):4256–4264
Oh CH, Park DI, Ryu JH et al (2007) Syntheses and characterization of cyclopropane-fused hydrocarbons as new high energetic materials. Bull Korean Chem Soc 28(2):322–324
Shelley MD, El-Halwagi MM (2000) Component-less design of recovery and allocation systems: a functionality-based clustering approach. Comput Chem Eng 24(9–10):2081–2091
Cookson DJ, Lloyd CP, Smith BE (1987) Investigation of the chemical basis of kerosene (jet fuel) specification properties. Energy Fuels 1(5):438–447
Cookson DJ, Lloyd CP, Smith BE (1988) Investigation of the chemical basis of diesel fuel properties. Energy Fuels 2(6):854–860
Cookson DJ, Smith BE (1990) Calculation of jet and diesel fuel properties using carbon-13 NMR spectroscopy. Energy Fuels 4(2):152–156
Cookson DJ, Iliopoulos P, Smith BE (1995) Composition-property relations for jet and diesel fuels of variable boiling range. Fuel 74(1):70–78
Liu GZ, Wang L, Qu HJ et al (2007) Artificial neural network approaches on composition–property relationships of jet fuels based on GC–MS. Fuel 86(16):2551–2559
Shi XP, Li HJ, Song ZY et al (2017) Quantitative composition-property relationship of aviation hydrocarbon fuel based on comprehensive two-dimensional gas chromatography with mass spectrometry and flame ionization detector. Fuel 200:395–406
Morris RE, Hammond MH, Cramer JA et al (2009) Rapid fuel quality surveillance through chemometric modeling of near-infrared spectra. Energy Fuels 23(3):1610–1618
Cramer JA, Morris RE, Rose-Pehrsson SL (2010) Use of genetic algorithms to improve partial least squares fuel property and synthetic fuel modeling from near-infrared spectra. Energy Fuels 24(10):5560–5572
Scheuermann SS, Forster S, Eibl S (2017) In-depth interpretation of mid-infrared spectra of various synthetic fuels for the chemometric prediction of aviation fuel blend properties. Energy Fuels 31(3):2934–2943
Gülüm M, Bilgin A (2015) Density, flash point and heating value variations of corn oil biodiesel–diesel fuel blends. Fuel Process Technol 134:456–464
Yue L, Li GQ, He GJ et al (2016) Impacts of hydrogen to carbon ratio (H/C) on fundamental properties and supercritical cracking performance of hydrocarbon fuels. Chem Eng J 283:1216–1223
Chen XY, Gao JJ, Lu YZ et al (2015) Acylation desulfurization of heavy cracking oil as a supplementary oil upgrading pathway. Fuel Process Technol 130:7–11
Annamalai K, Sweeten JM, Ramalingam SC (1987) Technical notes: estimation of gross heating values of biomass fuels. Trans ASAE 30(4):1205–1208
Albahri TA (2013) Method for predicting the standard net heat of combustion for pure hydrocarbons from their molecular structure. Energy Convers Manag 76:1143–1149
Blakey S, Wilson CW, Farmery M et al (2011) Fuel effects on range versus payload for modern jet aircraft. Aeronaut J 115(1172):627–634
Chuck CJ, Donnelly J (2014) The compatibility of potential bioderived fuels with Jet A-1 aviation kerosene. Appl Energy 118:83–91
Rothberg S, Jessup RS (1951) Net heat of combustion of AN-F-58 aircraft fuels. Ind Eng Chem 43(4):981–985
Antoine AC (1980) Use of petroleum-based correlations and estimation methods for synthetic fuels. NASA Technical Memorandum 81533. https://ntrs.nasa.gov/citations/ 19800019008. Accessed 1 June 1980
Solash J, Hazlett R, Hall J et al (1978) Relation between fuel properties and chemical composition. 1. Jet fuels from coal, oil shale and tar sands. Fuel 57(9):521–528
Nie GK, Zhang XW, Pan L et al (2017) Hydrogenated intramolecular cyclization of diphenylmethane derivatives for synthesizing high-density biofuel. Chem Eng Sci 173:91–97
Savos’kin MV, Kapkan LM, Vaiman GE et al (2007) New approaches to the development of high-performance hydrocarbon propellants. Russ J Appl Chem 80(1):31–37
ASTM D3338/D3338M-20 (2020) Standard test method for estimation of net heat of combustion of aviation fuels. ASTM International, Pennsylvania. https://doi.org/10.1520/d3338
ASTM D4529–17 (2017) Standard test method for estimation of net heat of combustion of aviation fuels. ASTM International, Pennsylvania
Fodor GE, Kohl KB (1993) Analysis of middle distillate fuels by midband infrared spectroscopy. Energy Fuels 7(5):598–601
Xie JJ, Zhang XW, Liu YK et al (2019) Synthesis of high-density liquid fuel via Diels-Alder reaction of dicyclopentadiene and lignocellulose-derived 2-methylfuran. Catal Today 319:139–144
Wang L, Zhang XW, Zou JJ et al (2009) Acid-catalyzed isomerization of tetrahydrotricyclopentadiene: synthesis of high-energy-density liquid fuel. Energy Fuels 23(5):2383–2388
Lamprecht D (2007) Fischer–Tropsch fuel for use by the US military as battlefield-use fuel of the future. Energy Fuels 21(3):1448–1453
Knothe G, Steidley KR (2005) Kinematic viscosity of biodiesel fuel components and related compounds. Influence of compound structure and comparison to petrodiesel fuel components. Fuel 84(9):1059–1065
Balster LM, Corporan E, DeWitt MJ et al (2008) Development of an advanced, thermally stable, coal-based jet fuel. Fuel Process Technol 89(4):364–378
Cai GQ, Liu ZF, Zhang LZ et al (2018) Quantitative structure–property relationship model for hydrocarbon liquid viscosity prediction. Energy Fuels 32(3):3290–3298
Jeihouni Y, Pischinger S, Ruhkamp L et al (2011) Relationship between fuel properties and sensitivity analysis of non-aromatic and aromatic fuels used in a single cylinder heavy duty diesel engine. SAE Technical Paper: 2011-01-0333, Warrendale, PA, USA
Dixon JA, Clark SGII (1959) Physical properties of high molecular weight alkylbenzenes and alkylcyclohexanes. J Chem Eng Data 4(1):94–96
Grunberg L, Nissan AH (1949) Mixture law for viscosity. Nature 164(4175):799–800
Allen CAW, Watts KC, Ackman RG et al (1999) Predicting the viscosity of biodiesel fuels from their fatty acid ester composition. Fuel 78(11):1319–1326
Yuan W, Hansen AC, Zhang Q (2009) Predicting the temperature dependent viscosity of biodiesel fuels. Fuel 88(6):1120–1126
ASTM D2386-19 (2019) Standard test method for freezing point of aviation fuels. ASTM International, Pennsylvania
Affens WA, Hall JM, Holt S et al (1984) Effect of composition on freezing points of model hydrocarbon fuels. Fuel 63(4):543–547
Duong LH, Fujita O, Reksowardojo IK et al (2016) Experimental investigation of the effects of cycloparaffins and aromatics on the sooting tendency and the freezing point of soap-derived biokerosene and normal paraffins. Fuel 185:855–862
Coetzer RLJ, Joubert TS, Viljoen CL et al (2018) Response surface models for synthetic jet fuel properties. Appl Petrochem Res 8(1):39–53
Vozka P, Šimáček P, Kilaz G (2018) Impact of HEFA feedstocks on fuel composition and properties in blends with jet A. Energy Fuels 32(11):11595–11606
Robota HJ, Alger JC, Shafer L (2013) Converting algal triglycerides to diesel and HEFA jet fuel fractions. Energy Fuels 27(2):985–996
Corporan E, Edwards T, Shafer L et al (2011) Chemical, thermal stability, seal swell, and emissions studies of alternative jet fuels. Energy Fuels 25(3):955–966
Han PJ, Nie GK, Xie JJ et al (2017) Synthesis of high-density biofuel with excellent low-temperature properties from lignocellulose-derived feedstock. Fuel Process Technol 163:45–50
Nie GK, Zhang XW, Pan L et al (2018) One-pot production of branched decalins as high-density jet fuel from monocyclic alkanes and alcohols. Chem Eng Sci 180:64–69
Hong TD, Soerawidjaja TH, Reksowardojo IK et al (2013) A study on developing aviation biofuel for the tropics: production process: experimental and theoretical evaluation of their blends with fossil kerosene. Chem Eng Process: Process Intensif 74:124–130
AlMulla HA, Albahri TA (2017) Predicting the properties of petroleum blends. Petrol Sci Technol 35(8):775–782
Aleme HG, Barbeira PJS (2012) Determination of flash point and cetane index in diesel using distillation curves and multivariate calibration. Fuel 102:129–134
Phoon LY, Mustaffa AA, Hashim H et al (2014) A review of flash point prediction models for flammable liquid mixtures. Ind Eng Chem Res 53(32):12553–12565
Poor HM, Sadrameli SM (2017) Calculation and prediction of binary mixture flash point using correlative and predictive local composition models. Fluid Phase Equilib 440:95–102
Affens WA, McLaren GW (1972) Flammability properties of hydrocarbon solutions in air. J Chem Eng Data 17(4):482–488
Shepherd JE, Nuyt CD, Lee JJ et al (2000) Flash point and chemical composition of aviation kerosene (Jet A). Explosion Dynamics Laboratory Report FM99-4, California, USA. https://authors.library.caltech.edu/25832/. Accessed 26 May 2000
Saldana DA, Starck L, Mougin P et al (2013) Prediction of flash points for fuel mixtures using machine learning and a novel equation. Energy Fuels 27(7):3811–3820
Ding C, He YP, Yin JS et al (2015) Study on the pressure dependence of boiling point, flashpoint, and lower flammability limit at low ambient pressure. Ind Eng Chem Res 54(6):1899–1907
Albahri TA (2003) Flammability characteristics of pure hydrocarbons. Chem Eng Sci 58(16):3629–3641
Katritzky AR, Petrukhin R, Jain R et al (2001) QSPR analysis of flash points. J Chem Inf Comput Sci 41(6):1521–1530
Wickey RO, Chittenden DH (1963) Flash points of blends correlated. Hydrocarb Process 42(6):157–158
Vidal M, Rogers WJ, Holste JC et al (2004) A review of estimation methods for flash points and flammability limits. Proc Saf Prog 23(1):47–55
Liu XS, Liu ZY (2010) Research progress on flash point prediction. J Chem Eng Data 55(9):2943–2950
Song CS, Eser S, Schobert HH et al (1993) Pyrolytic degradation studies of a coal-derived and a petroleum-derived aviation jet fuel. Energy Fuels 7(2):234–243
Ben Amara A, Kaoubi S, Starck L (2016) Toward an optimal formulation of alternative jet fuels: enhanced oxidation and thermal stability by the addition of cyclic molecules. Fuel 173:98–105
DeWitt MJ, West Z, Zabarnick S et al (2014) Effect of aromatics on the thermal-oxidative stability of synthetic paraffinic kerosene. Energy Fuels 28(6):3696–3703
van der Westhuizen R, Ajam M, de Coning P et al (2011) Comprehensive two-dimensional gas chromatography for the analysis of synthetic and crude-derived jet fuels. J Chromatogr A 1218(28):4478–4486
Adams RK, Zabarnick S, West ZJ et al (2013) Chemical analysis of jet fuel polar, heteroatomic species via high-performance liquid chromatography with electrospray ionization–mass spectrometric detection. Energy Fuels 27(5):2390–2398
Beaver B, Gao L, Burgess-Clifford C et al (2005) On the mechanisms of formation of thermal oxidative deposits in jet fuels. Are unified mechanisms possible for both storage and thermal oxidative deposit formation for middle distillate fuels? Energy Fuels 19(4):1574–1579
Klettlinger J, Rich R, Yen C et al (2011) Thermal stability testing of Fischer-Tropsch fuel and various blends with Jet A, as well as aromatic blend additives. In: Proceedings of the IEEE 2011 Energy Tech, May 25–26, 2011. Cleveland, OH
Pullen J, Saeed K (2012) An overview of biodiesel oxidation stability. Renew Sustain Energy Rev 16(8):5924–5950
Berkhous SK (2007) Thermal oxidative stability of coal-based JP-900 jet fuel: impact on selected physical properties. The Pennsylvania State University, Pennsylvania,
Knothe G (2007) Some aspects of biodiesel oxidative stability. Fuel Process Technol 88(7):669–677
Chatelain K, Nicolle A, Ben Amara A et al (2016) Wide range experimental and kinetic modeling study of chain length impact on n-alkanes autoxidation. Energy Fuels. https://doi.org/10.1021/acs.energyfuels.5b02470
Chatelain K, Nicolle A, Ben Amara A et al (2018) Structure–reactivity relationships in fuel stability: experimental and kinetic modeling study of isoparaffin autoxidation. Energy Fuels 32(9):9415–9426
Larsen RG, Thorpe RE, Armfield FA (1942) Oxidation characteristics of pure hydrocarbons. Ind Eng Chem 34(2):183–193
Rawson PM, Stansfield CA, Webster RL et al (2015) The oxidative stability of synthetic fuels and fuel blends with monoaromatic blending components. Fuel 161:97–104