Review on passive energy dissipation devices and techniques of installation for high rise building structures

Council, 1997, Edition NEHRP Recommended Provisions for the Development of Seismic Regulations for New Buildings and Other Structures, FEMA, 1998, 302 Kelly, 1972, Mechanisms of energy absorption in special devices for use in earthquake resistant structures, Bull N Z Soc Earthq Eng, 5, 63 Salimi, 2021, An evaluation of the advantages of friction TMD over conventional TMD, Innovative Infrastructure Solutions, 6, 1, 10.1007/s41062-021-00473-5 Kamgar, 2020, Modified tuned liquid dampers for seismic protection of buildings considering soil–structure interaction effects, Iranian Journal of Science and Technology, Transactions of Civil Engineering, 44, 339, 10.1007/s40996-019-00302-x Dadkhah, 2020, Improvement of performance level of steel moment-resisting frames using tuned mass damper system, Appl Sci, 10, 3403, 10.3390/app10103403 Constantinou, 1993, Seismic response of structures with supplemental damping, Struct Des Tall Build, 2, 77, 10.1002/tal.4320020202 Hanson, 1993, Supplemental damping for improved seismic performance, Earthq Spectra, 9, 319, 10.1193/1.1585719 Hsu, 1992, Seismic analysis design of frames with viscoelastic connections, J Struct Eng, 118, 2459, 10.1061/(ASCE)0733-9445(1992)118:9(2459) Gw, 1997, Structural control: past, present, and future, J Eng Mech, 123, 897 Constantinou, M.C., T.T. Soong, and G.F. Dargush, Passive energy dissipation systems for structural design and retrofit. 1998. Soong, 1997 Liu, 2005, Optimization methodology for damper configuration based on building performance indices, J Struct Eng, 131, 1746, 10.1061/(ASCE)0733-9445(2005)131:11(1746) Symans, 2008, Energy dissipation systems for seismic applications: current practice and recent developments, J Struct Eng, 134, 3, 10.1061/(ASCE)0733-9445(2008)134:1(3) Aktan, 2007, Performance-based engineering of constructed systems, J Struct Eng, 133, 311, 10.1061/(ASCE)0733-9445(2007)133:3(311) Taranath, B.S., Tall Building Design: Steel, Concrete, and Composite Systems. 2016: CRC press. Chicchi, 2018, Research review: Post-earthquake fire assessment of steel buildings in the United States, Adv Struct Eng, 21, 138, 10.1177/1369433217711617 Basu, 2014, A European Association for the Control of Structures joint perspective. Recent studies in civil structural control across Europe, Struct Control Health Monit, 21, 1414, 10.1002/stc.1652 Housner, 1997, Structural control: past, present, and future, J Eng Mech, 123, 897, 10.1061/(ASCE)0733-9399(1997)123:9(897) Salvi, 2018, Optimum tuned mass dampers under seismic soil-structure interaction, Soil Dyn Earthq Eng, 114, 576, 10.1016/j.soildyn.2018.07.014 Elias, 2017, Research developments in vibration control of structures using passive tuned mass dampers, Annu Rev Control, 44, 129, 10.1016/j.arcontrol.2017.09.015 Sadineni, 2011, Passive building energy savings: A review of building envelope components, Renew Sustain Energy Rev, 15, 3617, 10.1016/j.rser.2011.07.014 Hahn, 1992, Effects of added-damper distribution on the seismic response of buildings, Comput Struct, 43, 941, 10.1016/0045-7949(92)90308-M Hanson, R.D. and T.T. Soong, Seismic design with supplemental energy dissipation devices. Vol. 8. 2001: Earthquake Engineering Research Institute. Foti, 1998, Numerical efficiency assessment of energy dissipators for seismic protection of buildings, Earthq Eng Struct Dyn, 27, 543, 10.1002/(SICI)1096-9845(199806)27:6<543::AID-EQE733>3.0.CO;2-9 Hameed, 2014, Seismic performance of low to medium rise reinforced concrete buildings using passive energy dissipation devices, Pakistan Journal of Engineering and Applied Sciences Kamgar, 2021, Evaluation of buckling load and dynamic performance of steel shear wall retrofitted with strips made of shape memory alloy, Sci Iran, 28, 1096 Tavakoli, 2020, Optimal location of energy dissipation outrigger in high-rise building considering nonlinear soil-structure interaction effects, Periodica Polytechnica Civil Engineering, 64, 887 Xia, 1992, Influence of ADAS element parameters on building seismic response, J Struct Eng, 118, 1903, 10.1061/(ASCE)0733-9445(1992)118:7(1903) Martinez-Romero, 1993, Experiences on the use of supplementary energy dissipators on building structures, Earthq Spectra, 9, 581, 10.1193/1.1585731 Gluck, 1996, Design of supplemental dampers for control of structures, J Struct Eng, 122, 1394, 10.1061/(ASCE)0733-9445(1996)122:12(1394) Pall, 1982, Response of friction damped braced frames, J Struct Eng, 108, 1313 Aiken, I.D., Earthquake simulator testing and analytical studies of two energy-absorbing systems for multistory structures. 1992. Cherry, 1993, Seismic response control of buildings using friction dampers, Earthq Spectra, 9, 447, 10.1193/1.1585724 Filiatrault, 1987, Performance evaluation of friction damped braced steel frames under simulated earthquake loads, Earthq Spectra, 3, 57, 10.1193/1.1585419 Grigorian, 1993, Slotted bolted connection energy dissipators, Earthq Spectra, 9, 491, 10.1193/1.1585726 Filiatrault, 1988, Comparative performance of friction damped systems and base isolation systems for earthquake retrofit and aseismic design, Earthq Eng Struct Dyn, 16, 389, 10.1002/eqe.4290160308 Filiatrault, 1989, Efficient numerical modelling for the design of friction damped braced steel plane frames, Can J Civ Eng, 16, 211, 10.1139/l89-046 Pekau, 1991, Controlling seismic response of eccentric structures by friction dampers, Earthq Eng Struct Dyn, 20, 505, 10.1002/eqe.4290200602 Colajanni, 1997, Hysteretic behavior characterization of friction-damped braced frames, J Struct Eng, 123, 1020, 10.1061/(ASCE)0733-9445(1997)123:8(1020) Roik, 1988, Vibration control of structures under earthquake loading by three-stage friction-grip elements, Earthq Eng Struct Dyn, 16, 501, 10.1002/eqe.4290160404 Nims, 1993, The use of the energy dissipating restraint for seismic hazard mitigation, Earthq Spectra, 9, 467, 10.1193/1.1585725 Filiatrault, 2000, Performance evaluation of friction spring seismic damper, J Struct Eng, 126, 491, 10.1061/(ASCE)0733-9445(2000)126:4(491) Garivani, S., A.A. Aghakouchak, and S. Shahbeyk. An efficient energy dissipating device called comb teeth damper. in Proceedings of the 2nd European Conference on Earthquake Engineering and Seismology, Istanbul-Turkey. 2014. Whittaker, 1991, Seismic testing of steel plate energy dissipation devices, Earthq Spectra, 7, 563, 10.1193/1.1585644 Jara, J., et al. Seismic performance of buildings with energy dissipating systems. in Seminar on Seismic Isolation, Passive Energy Dissipation, and Active Control. San Francisco, CA. 1993. Fierro, E. and C. Perry. San Francisco retrofit design using added damping and stiffness (ADAS) elements. in Proc., ATC-17–1 Seminar on Seismic Isolation, Passive Energy Dissipation, and Active Control. 1993. ATC Redwood City, Calif. Perry, 1993, Seismic upgrade in San Francisco using energy dissipation devices, Earthq Spectra, 9, 559, 10.1193/1.1585730 Youssef, N. and T. Guh. Seismic Retrofit of Structures with Passive Energy Dissipation Devices. in Proceedings of the Seminar on Seismic Isolation, Passive Energy Dissipation, and Active Control. 1993. Nakashima, 1996, Energy input and dissipation behaviour of structures with hysteretic dampers, Earthq Eng Struct Dyn, 25, 483, 10.1002/(SICI)1096-9845(199605)25:5<483::AID-EQE564>3.0.CO;2-K Ruiz, 1995, Influence of the spatial distribution of energy-dissipating bracing elements on the seismic response of multistorey frames, Earthq Eng Struct Dyn, 24, 1511, 10.1002/eqe.4290241107 Tena-Colunga, 1997, Mathematical modelling of the ADAS energy dissipation device, Eng Struct, 19, 811, 10.1016/S0141-0296(97)00165-X TENA-COLUNGA, A. and A. Vergara,, 1997, Comparative study on the seismic retrofit of a mid-rise steel building: steel bracing vs energy dissipation, Earthq Eng Struct Dyn, 26, 637, 10.1002/(SICI)1096-9845(199706)26:6<637::AID-EQE666>3.0.CO;2-R Ramberg, W. and W.R. Osgood, Description of stress-strain curves by three parameters. 1943. Su, 1990 Xia, 1990 Graesser, E. and F.A. Cozzarelli, A multidimensional hysteretic model for plastically deforming metals in energy absorbing devices. Vol. 91. 1991: NCEER. Dargush, 1995, Behavior of metallic plate dampers in seismic passive energy dissipation systems, Earthq Spectra, 11, 545, 10.1193/1.1585827 Pong, 1994 Tsai, 1995, TPEA device as seismic damper for high-rise buildings, J Eng Mech, 121, 1075, 10.1061/(ASCE)0733-9399(1995)121:10(1075) Ciampi, 1995, Design of yielding or friction-based dissipative bracings for seismic protection of buildings, Eng Struct, 17, 381, 10.1016/0141-0296(95)00021-X Tsai, 1993, Design of steel triangular plate energy absorbers for seismic-resistant construction, Earthq Spectra, 9, 505, 10.1193/1.1585727 Makris, 1997, Viscous heating of fluid dampers during seismic and wind excitations: analytical solutions and design formulae, Report No UCB/EERC, 97, 11 Makris, 1998, Viscous heating of fluid dampers. II: Large-amplitude motions, J Eng Mech, 124, 1217, 10.1061/(ASCE)0733-9399(1998)124:11(1217) Makris, 1998, Viscous heating of fluid dampers. I: Small-amplitude motions, J Eng Mech, 124, 1210, 10.1061/(ASCE)0733-9399(1998)124:11(1210) Hou, 2008, Fluid dynamics and behavior of nonlinear viscous fluid dampers, J Struct Eng, 134, 56, 10.1061/(ASCE)0733-9445(2008)134:1(56) Lee, 2001, Viscous damper development and future trends, Struct Des Tall Build, 10, 311, 10.1002/tal.188 Constantinou, 1993, Fluid viscous dampers in applications of seismic energy dissipation and seismic isolation, Proceedings ATC, 17, 581 Niwa, 1995, Passive seismic response controlled high-rise building with high damping device, Earthq Eng Struct Dyn, 24, 655, 10.1002/eqe.4290240504 Pekcan, 1995, The seismic response of a 1: 3 scale model RC structure with elastomeric spring dampers, Earthq Spectra, 11, 249, 10.1193/1.1585814 Tsopelas, 1994 Soneji, 2007, Passive hybrid systems for earthquake protection of cable-stayed bridge, Eng Struct, 29, 57, 10.1016/j.engstruct.2006.03.034 Taylor, 2002, History, design, and applications of fluid dampers in structural engineering, Passive Structural Control Symposium Antonucci, R., et al. Shaking table testing of an RC frame with dissipative bracings. in Proceedings of 13th world conference on earthquake engineering, Vancouver, BC, Canada. 2004. Charney, 2008, Comparison of methods for computing equivalent viscous damping ratios of structures with added viscous damping, J Struct Eng, 134, 32, 10.1061/(ASCE)0733-9445(2008)134:1(32) Lin, 2002, Earthquake response of elastic SDF systems with non-linear fluid viscous dampers, Earthq Eng Struct Dyn, 31, 1623, 10.1002/eqe.179 Paola, 2007, Stochastic seismic analysis of structures with nonlinear viscous dampers, J Struct Eng, 133, 1475, 10.1061/(ASCE)0733-9445(2007)133:10(1475) Sarwar, 2019, Vibration control devices for building structures and installation approach: A review, Civil and Environmental Engineering Reports, 29, 10.2478/ceer-2019-0018 Chang, 1995, Seismic behavior of steel frame with added viscoelastic dampers, J Struct Eng, 121, 1418, 10.1061/(ASCE)0733-9445(1995)121:10(1418) Foutch, 1993, Seismic retrofit of nonductile reinforced concrete frames using viscoelastic dampers. Proceedings ATC 17–1 on Seismic Isolation, Passive and Active, Control, 2, 605 Min, 2004, Vibration tests of 5-storey steel frame with viscoelastic dampers, Eng Struct, 26, 831, 10.1016/j.engstruct.2004.02.004 Bergman, 1993, Viscoelastic mechanical damping devices tested at real earthquake displacements, Earthq Spectra, 9, 389, 10.1193/1.1585722 Lobo, 1993, Inelastic response of R/C structures with viscoelastic braces, Earthq Spectra, 9, 419, 10.1193/1.1585723 Montgomery, 2015, Experimental validation of viscoelastic coupling dampers for enhanced dynamic performance of high-rise buildings, J Struct Eng, 141, 04014145, 10.1061/(ASCE)ST.1943-541X.0001092 Christopoulos, 2013, Viscoelastic coupling dampers (VCDs) for enhanced wind and seismic performance of high-rise buildings, Earthq Eng Struct Dyn, 42, 2217, 10.1002/eqe.2321 Montgomery, M.S., Fork Configuration Damper (FCDs) for Enhanced Dynamic Performance of High-rise Buildings. 2012. Crosby, P., J. Kelly, and J. Singh. Utilizing visco-elastic dampers in the seismic retrofit of a thirteen story steel framed building. in Structures congress XII. 1994. ASCE. Hendsbee, D. Retrofit of a Concrete Frame Building Using Added Damping. in Proceedings of ATC-17-1 Seminar on Seismic Isolation, Passive Energy Dissipation, and Active Control, Applied Technology Council, San Francisco California. 1993. Kanitkar, 1998, Linear and Non-Linear Analysis of a Four Story Structure Using Viscoelastic Dampers Rai, 1999, Supplemental damping for seismic strengthening: a case study, Eng Struct, 21, 603, 10.1016/S0141-0296(98)00007-8 Miranda, 1998, Performance-based design of a building in Mexico City using viscoelastic dampers Aprile, 1997, Evolutionary model of viscoelastic dampers for structural applications, J Eng Mech, 123, 551, 10.1061/(ASCE)0733-9399(1997)123:6(551) Chang, 1992, Effect of ambient temperature on viscoelastically damped structure, J Struct Eng, 118, 1955, 10.1061/(ASCE)0733-9445(1992)118:7(1955) Tsai, 1994, Temperature effect of viscoelastic dampers during earthquakes, J Struct Eng, 120, 394, 10.1061/(ASCE)0733-9445(1994)120:2(394) Chang, 2004, Seismic response of full-scale structure with added viscoelastic dampers, J Struct Eng, 130, 600, 10.1061/(ASCE)0733-9445(2004)130:4(600) Fan, C., Seismic analysis, behavior, and retrofit of non-ductile reinforced concrete frame buildings using viscoelastic dampers. 1998, PhD Dissertation. Inaudi, 1997, Analysis of hysteretic damping using analytic signals, J Eng Mech, 123, 743, 10.1061/(ASCE)0733-9399(1997)123:7(743) Inaudi, 1995, Linear hysteretic damping and the Hilbert transform, J Eng Mech, 121, 626, 10.1061/(ASCE)0733-9399(1995)121:5(626) Inaudi, 1995, Modal equations of linear structures with viscoelastic dampers, Earthq Eng Struct Dyn, 24, 145, 10.1002/eqe.4290240111 Inaudi, 1996, Time-domain analysis of linear hysteretic damping, Earthq Eng Struct Dyn, 25, 529, 10.1002/(SICI)1096-9845(199606)25:6<529::AID-EQE549>3.0.CO;2-P Makris, 1997, Causal hysteretic element, J Eng Mech, 123, 1209, 10.1061/(ASCE)0733-9399(1997)123:11(1209) Makris, 1996, Macroscopic models with complex coefficients and causality, J Eng Mech, 122, 566, 10.1061/(ASCE)0733-9399(1996)122:6(566) Shen, 1995, Modeling of viscoelastic dampers for structural applications, J Eng Mech, 121, 694, 10.1061/(ASCE)0733-9399(1995)121:6(694) Bagley, 1983, Fractional calculus-a different approach to the analysis of viscoelastically damped structures, AIAA J, 21, 741, 10.2514/3.8142 Tsai, 1993, Applications of viscoelastic dampers to high-rise buildings, J Struct Eng, 119, 1222, 10.1061/(ASCE)0733-9445(1993)119:4(1222) Kasai, 1993, Viscoelastic Damper Hysteresis Model: Theory, Experiment, and Application ATC-17-1 Seminar, Applied Technology Council, 2, 521 Christopoulos, 2006, Vol. 133 Uang, 1990, Evaluation of seismic energy in structures, Earthq Eng Struct Dyn, 19, 77, 10.1002/eqe.4290190108 Constantinou, 1983, Optimum design of a first story damping system, Comput Struct, 17, 305, 10.1016/0045-7949(83)90019-6 Gürgöze, 1992, Optimal positioning of dampers in multi-body systems, J Sound Vib, 158, 517, 10.1016/0022-460X(92)90422-T Shukla, 1999, Optimal use of viscoelastic dampers in building frames for seismic force, J Struct Eng, 125, 401, 10.1061/(ASCE)0733-9445(1999)125:4(401) Wu, 1997, Optimal placement of energy dissipation devices for three-dimensional structures, Eng Struct, 19, 113, 10.1016/S0141-0296(96)00034-X Huang, X., Strategic placement of viscous dampers in steel buildings under strong earthquake ground motions. 2018, University of Warwick. Levy, 2006, Fully stressed design of passive controllers in framed structures for seismic loadings, Struct Multidiscip Optim, 32, 485, 10.1007/s00158-005-0558-5 Levy, 2009, Quantitative comparison of optimization approaches for the design of supplemental damping in earthquake engineering practice, J Struct Eng, 135, 321, 10.1061/(ASCE)0733-9445(2009)135:3(321) Singh, 2002, Optimal placement of dampers for passive response control, Earthq Eng Struct Dyn, 31, 955, 10.1002/eqe.132 Takewaki, 1997, Optimal damper placement for minimum transfer functions, Earthq Eng Struct Dyn, 26, 1113, 10.1002/(SICI)1096-9845(199711)26:11<1113::AID-EQE696>3.0.CO;2-X Trombetti, T., S. Silvestri, and M. Palermo, Building Control with Passive Dampers. Optimal Performance-based Design for Earthquakes, Izuru Takewaki. John Wiley & Sons (Asia) Pte Ltd., 2 Clement Loop,# 02-01, Singapore 129809 (2009). 306 pp., Cloth, ISBN: 978-0-470-82491-7. Engineering structures, 2014. 59: p. 552-553. Garcia, 2001, A simple method for the design of optimal damper configurations in MDOF structures, Earthq Spectra, 17, 387, 10.1193/1.1586180 Zhang, 1992, Seismic design of viscoelastic dampers for structural applications, J Struct Eng, 118, 1375, 10.1061/(ASCE)0733-9445(1992)118:5(1375) Whittle, J., Strategic placement of viscous dampers for seismic structural design. 2011, University of Oxford.