Review of solar parabolic-trough collector geometrical and thermal analyses, performance, and applications

García-Cortés, 2012, Estimating intercept factor of a parabolic solar trough collector with new supporting structure using off-the-shelf photogrammetric equipment, Appl Energy, 92, 815, 10.1016/j.apenergy.2011.08.032 Rajaseenivasan, 2013, Comparative study of double basin and single basin solar stills, Desalination, 309, 27, 10.1016/j.desal.2012.09.014 Lüpfert, 2001, Eurotrough design issues and prototype testing At Psa, Sol Forum, 1 Pytilinski, 1978, Solar energy installations for pumping irrigation water, Sol Energy, 21, 255, 10.1016/0038-092X(78)90001-4 Spencer, 1989, A comprehensive review of small solar-powered heat engines: part I. A history of solar-powered devices up to 1950, Sol Energy, 43, 191, 10.1016/0038-092X(89)90019-4 Shaner, 1979, Solar thermal electric power systems: comparison of line-focus collectors, Sol Energy, 22, 49, 10.1016/0038-092X(79)90059-8 Fernández-García, 2010, Parabolic-trough solar collectors and their applications, Renew Sustain Energy Rev, 14, 1695, 10.1016/j.rser.2010.03.012 Gong, 2010, An optimized model and test of the China's first high temperature parabolic trough solar receiver, Sol Energy, 84, 2230, 10.1016/j.solener.2010.08.003 Eskin, 1999, Transient performance analysis of cylindrical parabolic concentrating collectors and comparison with experimental results, Energy Convers Manag, 40, 175, 10.1016/S0196-8904(98)00035-1 Naeeni, 2007, Analysis of wind flow around a parabolic collector (2) heat transfer from receiver tube, Renew Energy, 32, 1259, 10.1016/j.renene.2006.06.005 Burkhard, 1973, Specular reflection of heat radiation from an arbitrary reflector surface to an arbitrary receiver surface, Int J Heat Mass Transf, 16, 271, 10.1016/0017-9310(73)90056-2 Jeter, 1987, Analytical determination of the optical performance of practical parabolic trough collectors from design data, Sol Energy, 39, 11, 10.1016/S0038-092X(87)80047-6 Eck M, Feldhoff JF, Uhlig R. Thermal Modelling and Simulation of Parabolic Trough Receiver Tubes. ASME 2010 4th Int Conf Energy Sustain Vol 2 2010:659–66. 〈http://dx.doi.org/10.1115/ES2010-90402〉. Good, 2016, A 1.2MWth solar parabolic trough system based on air as heat transfer fluid at 500°C — Engineering design, modelling, construction, and testing, Sol Energy, 139, 398, 10.1016/j.solener.2016.10.002 Collares, 1991, High concentration two-stage optics for parabolic trough solar collector with tubular absorber and large rim angle, Sol Energy, 47, 457, 10.1016/0038-092X(91)90114-C Canavarro, 2013, New second-stage concentrators (XX SMS) for parabolic primaries; Comparison with conventional parabolic trough concentrators, Sol Energy, 92, 98, 10.1016/j.solener.2013.02.011 Menbari, 2017, Experimental investigation of thermal performance for direct absorption solar parabolic trough collector (DASPTC) based on binary nanofluids, Exp Therm Fluid Sci, 80, 218, 10.1016/j.expthermflusci.2016.08.023 Price, 2002, Advances in parabolic trough solar power technology, J Sol Energy Eng, 124, 109, 10.1115/1.1467922 Sup, 2015, Effect of rim angle to the flux distribution diameter in solar parabolic dish collector, Energy Proc, 68, 45, 10.1016/j.egypro.2015.03.231 Kasaeian, 2015, Performance evaluation and nanofluid using capability study of a solar parabolic trough collector, Energy Convers Manag, 89, 368, 10.1016/j.enconman.2014.09.056 Rabl, 1976, Comparison of solar concentrators, Sol Energy, 18, 93, 10.1016/0038-092X(76)90043-8 Shankar Ganesh, 2012, Design and modeling of low temperature solar thermal power station, Appl Energy, 91, 180, 10.1016/j.apenergy.2011.09.021 Valan Arasu, 2007, Design, manufacture and testing of fiberglass reinforced parabola trough for parabolic trough solar collectors, Sol Energy, 81, 1273, 10.1016/j.solener.2007.01.005 Gaul, 1980, Incidence-angle modifier and average optical efficiency of parabolic trough collectors, J Sol Energy Eng, 102, 16, 10.1115/1.3266115 Güven, 1986, Determination of error tolerances for the optical design of parabolic troughs for developing countries, Sol Energy, 36, 535, 10.1016/0038-092X(86)90018-6 Arasu AV, Sornakumar T. Performance Characteristics of Parabolic Trough Solar Collector System for. Int Energy J 2006;7:137–46. De Oliveira, 2014, Heat transfer analysis and modeling of a parabolic trough solar collector: an analysis, Energy Proc, 57, 401, 10.1016/j.egypro.2014.10.193 Sun, 2015, Numerical study of parabolic-trough direct steam generation loop in recirculation mode: characteristics, performance and general operation strategy, Energy Convers Manag, 96, 287, 10.1016/j.enconman.2015.02.080 Kalogirou, 2012, A detailed thermal model of a parabolic trough collector receiver, Energy, 48, 298, 10.1016/j.energy.2012.06.023 Lu, 2013, Nonuniform heat transfer model and performance of parabolic trough solar receiver, Energy, 59, 666, 10.1016/j.energy.2013.07.052 Cheng, 2015, A detailed nonuniform thermal model of a parabolic trough solar receiver with two halves and two inactive ends, Renew Energy, 74, 139, 10.1016/j.renene.2014.07.060 Salgado Conrado, 2017, Thermal performance of parabolic trough solar collectors, Renew Sustain Energy Rev, 67, 1345, 10.1016/j.rser.2016.09.071 Wu, 2014, Three-dimensional numerical study of heat transfer characteristics of parabolic trough receiver, Appl Energy, 113, 902, 10.1016/j.apenergy.2013.07.050 Yilmaz, 2014, Thermo-mathematical modeling of parabolic trough collector, Energy Convers Manag, 88, 768, 10.1016/j.enconman.2014.09.031 Zhang, 2013, An experimental investigation of the heat losses of a U-type solar heat pipe receiver of a parabolic trough collector-based natural circulation steam generation system, Renew Energy, 57, 262, 10.1016/j.renene.2013.01.029 Nolte, 2015, Second law analysis and optimization of a parabolic trough receiver tube for direct steam generation, Heat Mass Transf Stoff, 51, 875, 10.1007/s00231-014-1465-3 Wu, 2014, Structural reliability analysis of parabolic trough receivers, Appl Energy, 123, 232, 10.1016/j.apenergy.2014.02.068 Zou, 2016, An experimental investigation on a small-sized parabolic trough solar collector for water heating in cold areas, Appl Energy, 163, 396, 10.1016/j.apenergy.2015.10.186 Fuqiang, 2016, Heat transfer performance enhancement and thermal strain restrain of tube receiver for parabolic trough solar collector by using asymmetric outward convex corrugated tube, Energy, 114, 275, 10.1016/j.energy.2016.08.013 Hegazy, 1995, Thermal performance of a parabolic trough collector with a longitudinal externally finned absorber, Heat Mass Transf, 31, 95, 10.1007/BF02537427 Jaramillo, 2016, Parabolic trough solar collector for low enthalpy processes: an analysis of the efficiency enhancement by using twisted tape inserts, Renew Energy, 93, 125, 10.1016/j.renene.2016.02.046 Jafar, 2014, Thermal performance of solar parabolic trough collector using nanofluids and the absorber with nail twisted tapes inserts, Int Energy J, 14, 189 Ananth, 2013, Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heating system fitted with regularly spaced twisted tape with rod and spacer, Energy Convers Manag, 73, 207, 10.1016/j.enconman.2013.04.022 Jaisankar, 2011, Experimental studies on heat transfer and thermal performance characteristics of thermosyphon solar water heating system with helical and Left-Right twisted tapes, Energy Convers Manag, 52, 2048, 10.1016/j.enconman.2010.11.024 Jaisankar, 2009, Studies on heat transfer and friction factor characteristics of thermosyphon solar water heating system with helical twisted tapes, Energy, 34, 1054, 10.1016/j.energy.2009.03.015 Jaisankar, 2008, Experimental studies on heat transfer and friction factor characteristics of forced circulation solar water heater system fitted with left-right twisted tapes, Int Energy J, 9, 199 Jaisankar, 2009, Experimental studies on heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of twisted tapes, Appl Therm Eng, 29, 1224, 10.1016/j.applthermaleng.2008.06.009 Jaisankar, 2009, Experimental investigation of heat transfer and friction factor characteristics of thermosyphon solar water heater system fitted with spacer at the trailing edge of Left-Right twisted tapes, Energy Convers Manag, 50, 2638, 10.1016/j.enconman.2009.06.019 Saravanan, 2016, Performance assessment in V-trough solar water heater fitted with square and V-cut twisted tape inserts, Appl Therm Eng, 102, 476, 10.1016/j.applthermaleng.2016.03.088 Kumar, 2000, Investigation of twisted tape inserted solar water heaters—heat transfer, friction factor and thermal performance results, Renew Energy, 19, 379, 10.1016/S0960-1481(99)00061-0 Yao, 2015, Performance evaluation of all-glass evacuated tube solar water heater with twist tape inserts using CFD, Energy Procedia, 70, 332, 10.1016/j.egypro.2015.02.131 Piriyarungrod, 2015, Heat transfer enhancement by tapered twisted tape inserts, Chem Eng Process Process Intensif, 96, 62, 10.1016/j.cep.2015.08.002 Ghadirijafarbeigloo, 2013, 3-D numerical simulation of heat transfer and turbulent flow in a receiver tube of solar parabolic trough concentrator with louvered twisted-tape inserts, Energy Proc, 49, 373, 10.1016/j.egypro.2014.03.040 Eiamsa-ard, 2010, Turbulent heat transfer enhancement by counter/co-swirling flow in a tube fitted with twin twisted tapes, Exp Therm Fluid Sci, 34, 53, 10.1016/j.expthermflusci.2009.09.002 Mwesigye, 2015, Multi-objective and thermodynamic optimisation of a parabolic trough receiver with perforated plate inserts, Appl Therm Eng, 77, 42, 10.1016/j.applthermaleng.2014.12.018 Mwesigye, 2014, Heat transfer and thermodynamic performance of a parabolic trough receiver with centrally placed perforated plate inserts, Appl Energy, 136, 989, 10.1016/j.apenergy.2014.03.037 Zhang, 2016, Effect of receiver diameter ratio on thermal performance of natural circulation steam generation system as applied to parabolic trough collector using water as working fluid, Int J Heat Mass Transf, 92, 1191, 10.1016/j.ijheatmasstransfer.2015.09.075 Wang, 2015, Effects of glass cover on heat flux distribution for tube receiver with parabolic trough collector system, Energy Convers Manag, 90, 47, 10.1016/j.enconman.2014.11.004 Diwan, 2015, Heat transfer enhancement in absorber tube of parabolic trough concentrators using wire- coils inserts heat transfer enhancement in absorber tube of parabolic trough concentrators using wire-coils inserts, Univ J Mech Eng, 3, 107, 10.13189/ujme.2015.030305 Martín, 2011, Simulation of an enhanced flat-plate solar liquid collector with wire-coil insert devices, Sol Energy, 85, 455, 10.1016/j.solener.2010.12.013 García A, Vicente PG, Viedma A, Mecanismo H. Experimental Investigation on Heat Transfer and Frictional Characteristics; 2005. Choudhari, 2013, Experimental studies on effect of coil wire insert on heat transfer enhancement and friction factor of double pipe heat exchanger, Int J Comput Eng Res, 3, 32 Amina, 2016, Heat transfer enhancement in a parabolic trough solar receiver using longitudinal fins and nanofluids, J Therm Sci, 25, 410, 10.1007/s11630-016-0878-3 Nanan, 2017, Flow and thermal mechanisms in a heat exchanger tube inserted with twisted cross-baffle turbulators, Appl Therm Eng, 114, 130, 10.1016/j.applthermaleng.2016.11.153 Waghole, 2014, Experimental investigations on heat transfer and friction factor of silver nanofliud in absorber/receiver of parabolic trough collector with twisted tape inserts, Energy Proc, 45, 558, 10.1016/j.egypro.2014.01.060 Hong, 2017, Experimental heat transfer and flow characteristics in a spiral grooved tube with overlapped large/small twin twisted tapes, Int J Heat Mass Transf, 106, 1178, 10.1016/j.ijheatmasstransfer.2016.10.098 Shahin, 2016, Thermodynamic analysis of parabolic trough and heliostat field solar collectors integrated with a Rankine cycle for cogeneration of electricity and heat, Sol Energy, 136, 183, 10.1016/j.solener.2016.06.057 Padilla, 2011, Heat transfer analysis of parabolic trough solar receiver, Appl Energy, 88, 5097, 10.1016/j.apenergy.2011.07.012 Paetzold, 2015, Wind engineering analysis of parabolic trough collectors to optimise wind loads and heat loss, Energy Proc, 69, 168, 10.1016/j.egypro.2015.03.020 Paetzold, 2014, Wind engineering analysis of parabolic trough solar collectors: the effects of varying the trough depth, J Wind Eng Ind Aerodyn, 135, 118, 10.1016/j.jweia.2014.10.017 Andre, 2015, Numerical simulation of wind loads on a parabolic trough solar collector using lattice Boltzmann and finite element methods, J Wind Eng Ind Aerodyn, 146, 185, 10.1016/j.jweia.2015.08.010 Naeeni, 2007, Analysis of wind flow around a parabolic collector (1) fluid flow, Renew Energy, 32, 1898, 10.1016/j.renene.2006.10.004 Hosoya N, Peterka J a, Gee RC, Kearney D. Wind Tunnel Tests of Parabolic Trough Solar Collectors; 2008:133. Zhang, 2015, Numerical study and optimization of mirror gap effect on wind load on parabolic trough solar collectors, Energy Proc, 69, 233, 10.1016/j.egypro.2015.03.027 Price H, Forristall R, Wendelin T, Lewandowski a, Moss T. Field Survey of Parabolic Trough Receiver Thermal Performance Preprint. Proc ISEC2006 ASME Int Sol Energy Conf July 8-13, 2006, Denver, Color USA 2006:1–11. 〈http://dx.doi.org/10.1115/ISEC2006-99167〉. Edenburn, 1976, Performance analysis of a cylindrical parabolic focusing collector and comparison with experimental results, Sol Energy, 18, 437, 10.1016/0038-092X(76)90010-4 Kalogirou SA. Solar thermal collectors and applications. vol. 30; 2004. 〈http://dx.doi.org/10.1016/j.pecs.2004.02.001〉. Omer, 2000, Design and thermal analysis of a two stage solar concentrator for combined heat and thermoelectric power generation, Energy Convers Manag, 41, 737, 10.1016/S0196-8904(99)00134-X Gang, 2011, Design and analysis of a novel low-temperature solar thermal electric system with two-stage collectors and heat storage units, Renew Energy, 36, 2324, 10.1016/j.renene.2011.02.008 Venegas-Reyes, 2012, Design, construction, and testing of a parabolic trough solar concentrator for hot water and low enthalpy steam generation, J Renew Sustain Energy, 4, 053103, 10.1063/1.4751461 Jaramillo, 2013, Parabolic trough concentrators for low enthalpy processes, Renew Energy, 60, 529, 10.1016/j.renene.2013.04.019 Geyer, 2002, E URO T rough - parabolic trough collector developed for cost efficient solar power generation, Transportation, 1 Abdallah, 2004, The effect of using sun tracking systems on the voltage-current characteristics and power generation of flat plate photovoltaics, Energy Convers Manag, 45, 1671, 10.1016/j.enconman.2003.10.006 Bakos, 2006, Design and construction of a two-axis Sun tracking system for parabolic trough collector (PTC) efficiency improvement, Renew Energy, 31, 2411, 10.1016/j.renene.2005.11.008 Valan Arasu, 2008, Life cycle cost analysis of new FRP based solar parabolic trough collector hot water generation system, J Zhejiang Univ Sci A, 9, 416, 10.1631/jzus.A072134 Bellos, 2016, Thermal enhancement of solar parabolic trough collectors by using nanofluids and converging-diverging absorber tube, Renew Energy, 94, 213, 10.1016/j.renene.2016.03.062 Wu, 2009, Thermal energy storage behavior of Al2O3-H2O nanofluids, Thermochim Acta, 483, 73, 10.1016/j.tca.2008.11.006 Kaloudis, 2016, Numerical simulations of a parabolic trough solar collector with nanofluid using a two-phase model, Renew Energy, 97, 218, 10.1016/j.renene.2016.05.046 Bakos, 2000, Design, optimisation and conversion-efficiency determination of a line-focus parabolic-trough solar-collector (PTC), Appl Energy, 68, 43, 10.1016/S0306-2619(00)00034-9 You, 2013, Modeling of fluid flow and heat transfer in a trough solar collector, Appl Therm Eng, 54, 247, 10.1016/j.applthermaleng.2013.01.046 Silva, 2013, Modeling and co-simulation of a parabolic trough solar plant for industrial process heat, Appl Energy, 106, 287, 10.1016/j.apenergy.2013.01.069 Lobón, 2014, Modeling direct steam generation in solar collectors with multiphase CFD, Appl Energy, 113, 1338, 10.1016/j.apenergy.2013.08.046 De Risi, 2013, Modelling and optimization of transparent parabolic trough collector based on gas-phase nanofluids, Renew Energy, 58, 134, 10.1016/j.renene.2013.03.014 Hachicha, 2014, Wind speed effect on the flow field and heat transfer around a parabolic trough solar collector, Appl Energy, 130, 200, 10.1016/j.apenergy.2014.05.037 Hachicha, 2013, Numerical simulation of wind flow around a parabolic trough solar collector, Appl Energy, 107, 426, 10.1016/j.apenergy.2013.02.014 Cheng, 2012, Numerical study of heat transfer enhancement by unilateral longitudinal vortex generators inside parabolic trough solar receivers, Int J Heat Mass Transf, 55, 5631, 10.1016/j.ijheatmasstransfer.2012.05.057 Yaghoubi, 2013, Analysis of heat losses of absorber tubes of parabolic through collector of Shiraz (Iran) solar power plant, J Clean Energy Technol, 1, 33, 10.7763/JOCET.2013.V1.8 Ravi Kumar, 2009, Thermal analysis of solar parabolic trough with porous disc receiver, Appl Energy, 86, 1804, 10.1016/j.apenergy.2008.11.007 García-Valladares, 2009, Numerical simulation of parabolic trough solar collector: improvement using counter flow concentric circular heat exchangers, Int J Heat Mass Transf, 52, 597, 10.1016/j.ijheatmasstransfer.2008.08.004 Bhattacharyya, 2013, Solar stills for desalination of water in rural households, Int J Environ Sustain, 2, 21, 10.24102/ijes.v2i1.326 Nafey, 2010, Combined solar organic Rankine cycle with reverse osmosis desalination process: energy, exergy, and cost evaluations, Renew Energy, 35, 2571, 10.1016/j.renene.2010.03.034 Jafari, 2015, A new desalination system using a combination of heat pipe, evacuated tube and parabolic through collector, Energy Convers Manag, 99, 141, 10.1016/j.enconman.2015.04.028 Sharaf, 2011, Exergy and thermo-economic analyses of a combined solar organic cycle with multi effect distillation (MED) desalination process, Desalination, 272, 135, 10.1016/j.desal.2011.01.006 Ekechukwu, 1999, Review of solar-energy drying systems II: an overview of solar drying technology, Energy Convers Manag, 40, 615, 10.1016/S0196-8904(98)00093-4 Tyagi, 2012, Review on solar air heating system with and without thermal energy storage system, Renew Sustain Energy Rev, 16, 2289, 10.1016/j.rser.2011.12.005 El Khadraoui, 2016, Solar air heater with phase change material: an energy analysis and a comparative study, Appl Therm Eng, 107, 1057, 10.1016/j.applthermaleng.2016.07.004 Lv, 2016, Experiment study on the thermal properties of paraffin/kaolin thermal energy storage form-stable phase change materials, Appl Energy, 182, 475, 10.1016/j.apenergy.2016.08.147 Kapsalis, 2016, Solar thermal energy storage and heat pumps with phase change materials, Appl Therm Eng, 99, 1212, 10.1016/j.applthermaleng.2016.01.071 Veerakumar, 2016, Phase change material based cold thermal energy storage: materials, techniques and applications - A review, Int J Refrig, 67, 271, 10.1016/j.ijrefrig.2015.12.005 Zhang, 2014, Preparation and properties of palmitic-stearic acid eutectic mixture/expanded graphite composite as phase change material for energy storage, Energy, 78, 950, 10.1016/j.energy.2014.10.092 Pielichowska, 2014, Phase change materials for thermal energy storage, Prog Mater Sci, 65, 67, 10.1016/j.pmatsci.2014.03.005 Tyagi, 2007, PCM thermal storage in buildings: a state of art, Renew Sustain Energy Rev, 11, 1146, 10.1016/j.rser.2005.10.002 Enibe SO. Thermal analysis of a natural circulation solar air heater with phase change material energy storage. vol. 28. 2003. 〈http://dx.doi.org/10.1016/S0960-1481(03)00071-5〉. Rabin, 1995, Integrated solar collector storage system based on a salt-hydrate phase-change material, Sol Energy, 55, 435, 10.1016/0038-092X(95)00074-2 Morrison, 1978, Effects of phase-change energy storage on the performance of air-based and liquid-based solar heating systems, Sol Energy, 20, 57, 10.1016/0038-092X(78)90141-X Jurinak, 1978, Properties optimization for phase-change energy storage in air-based solar heating systems, Sol Energy, 21, 377, 10.1016/0038-092X(78)90169-X Hammou, 2006, A new PCM storage system for managing simultaneously solar and electric energy, Energy Build, 38, 258, 10.1016/j.enbuild.2005.06.008 Hammou, 2006, A hybrid thermal energy storage system for managing simultaneously solar and electric energy, Energy Convers Manag, 47, 273, 10.1016/j.enconman.2005.01.003 Al-Alili, 2014, Review of solar thermal air conditioning technologies, Int J Refrig, 39, 4, 10.1016/j.ijrefrig.2013.11.028 Al-Alili, 2014, A hybrid solar air conditioner: experimental investigation, Int J Refrig, 39, 117, 10.1016/j.ijrefrig.2013.10.006 Al-Alili, 2012, A high efficiency solar air conditioner using concentrating photovoltaic/thermal collectors, Appl Energy, 93, 138, 10.1016/j.apenergy.2011.05.010 El Fadar, 2009, Study of a new solar adsorption refrigerator powered by a parabolic trough collector, Appl Therm Eng, 29, 1267, 10.1016/j.applthermaleng.2008.06.012 Sharaf, 2015, Concentrated photovoltaic thermal (CPVT) solar collector systems: part II - Implemented systems, performance assessment, and future directions, Renew Sustain Energy Rev, 50, 1566, 10.1016/j.rser.2014.07.215 Sandnes, 2002, A photovoltaic/thermal (PV/T) collector with a polymer absorber plate, Exp Study Anal Model Sol Energy, 72, 63, 10.1016/S0038-092X(01)00091-3 Fujisawa, 2001, Optimum design for residential photovoltaic-thermal binary utilization system by minimizing auxiliary energy, Electr Eng Jpn, 137, 28, 10.1002/eej.1077 Kalogirou, 2007, Industrial application of PV/T solar energy systems, Appl Therm Eng, 27, 1259, 10.1016/j.applthermaleng.2006.11.003 Wang, 2016, Optimal scheduling of demand responsive industrial production with hybrid renewable energy systems, Renew Energy, 100, 53, 10.1016/j.renene.2016.05.051 Douani, 2013, Analysis of the energetic feasibility of parabolic trough collectors integrated in solar towers in Adrar area, Energy Proc, 36, 1085, 10.1016/j.egypro.2013.07.124 Hachicha, 2013, Heat transfer analysis and numerical simulation of a parabolic trough solar collector, Appl Energy, 111, 581, 10.1016/j.apenergy.2013.04.067 Larraín, 2010, Performance model to assist solar thermal power plant siting in northern Chile based on backup fuel consumption, Renew Energy, 35, 1632, 10.1016/j.renene.2010.01.008 Bishoyi, 2017, Modeling and performance simulation of 100 MW PTC based solar thermal power plant in Udaipur India, Case Stud Therm Eng, 10, 216, 10.1016/j.csite.2017.05.005 Nation, 2017, Modelling and simulation of a novel Electrical Energy Storage (EES) Receiver for Solar Parabolic Trough Collector (PTC) power plants, Appl Energy, 195, 950, 10.1016/j.apenergy.2017.03.084 Qiu, 2016, Thermal performance analysis of a parabolic trough solar collector using supercritical CO2 as heat transfer fluid under non-uniform solar flux, Appl Therm Eng Price H. A Parabolic Trough Solar Power Plant Simulation Model. ASME 2003 Int Sol Energy Conf 2003:665–73. 〈http://dx.doi.org/10.1115/ISEC2003-44241〉. Bradshaw RW, Siegel NP. Molten Nitrate Salt Development For Thermal Energy Storage In Parabolic Trough Solar Power Systems. Proc 2nd Int Conf Energy Sustain:631–637. 〈http://dx.doi.org/10.1115/ES2008-54174〉; 2008. Eck, 2003, Applied research concerning the direct steam generation in parabolic troughs, Sol Energy, 74, 341, 10.1016/S0038-092X(03)00111-7 Pacheco, 2002, Development of a molten-salt thermocline thermal storage system for parabolic trough plants, J Sol Energy Eng, 124, 153, 10.1115/1.1464123 Odeh, 1998, Modelling of parabolic trough direct steam generation solar collectors, Sol Energy, 62, 395, 10.1016/S0038-092X(98)00031-0 Muñoz, 2011, Analysis of internal helically finned tubes for parabolic trough design by CFD tools, Appl Energy, 88, 4139, 10.1016/j.apenergy.2011.04.026 Farooq, 2008, Optimisation of metal sputtered and electroplated substrates for solar selective coatings, Renew Energy, 33, 1275, 10.1016/j.renene.2007.06.025 De Jong, 2013, Solar and wind energy production in relation to the electricity load curve and hydroelectricity in the northeast region of Brazil, Renew Sustain Energy Rev, 23, 526, 10.1016/j.rser.2013.01.050 Lauterbach, 2012, The potential of solar heat for industrial processes in Germany, Renew Sustain Energy Rev, 16, 5121, 10.1016/j.rser.2012.04.032 Fernndez-Garc, 2010, Parabolic-trough solar collectors and their applications, Renew Sustain Energy Rev, 14, 1695, 10.1016/j.rser.2010.03.012 Lüpfert, 2008, Experimental Analysis of Overall Thermal Properties of Parabolic Trough Receivers, J Sol Energy Eng, 130, 021007, 10.1115/1.2888756