Review and analysis of PEM fuel cell design and manufacturing
Tóm tắt
Từ khóa
Tài liệu tham khảo
Gottesfeld, 1997, Polymer electrolyte fuel cells, Adv. Electrochem. Sci. Eng., 5, 195, 10.1002/9783527616794.ch4
EG&G Services, Fuel Cell Handbook, 5th ed., Parsons Inc., October 2000. Available from World Wide Web: http://www.fuelcells.org/fchandbook.pdf. Last retrieved on 2 January 2002.
J. Larminie, A. Dicks, Fuel Cell Systems Explained, Wiley, New York, 2000.
X. Glipa, M. Hogarth, Department of Trade and Industry (UK) Homepage, 2001. Available from World Wide Web: http://www.dti.gov.uk/renewable/pdf/f0200189.pdf. Last retrieved 2 November 2001.
Rikukawa, 2000, Proton conducting polymer electrolyte membranes based on hydrocarbon polymers, Prog. Polym. Sci., 25, 1463, 10.1016/S0079-6700(00)00032-0
R. Borup, N. Vanderborgh, Design and testing criteria for bipolar plate materials for PEM fuel cell applications, in: Proceedings of the Materials Research Society Symposium on the Materials for Electrochemical Energy Storage and Conversion I—Batteries, Capacitors and Fuel Cells, vol. 393, 1995, pp. 151–155.
V. Mehta, Analysis of Design and Manufacturing of Proton Exchange Membrane Fuel Cells, M.S. thesis, University of Washington, Washington, DC, 2002.
Los Alamos National Laboratory Home page, 31 July 2000. Available from World Wide Web: http://education.lanl.gov/resources/fuelcells/. Last retrieved on 2 November 2001.
Ion Power Homepage, Nafion® Material Safety Data Sheet (MSDS). Available from World Wide Web: http://ion-power.com/nafion/naf001.html. Last retrieved on 2 November 2001.
J. Crawford, Towards a PEM Fuel Cell Bill of Materials Model, M.S. thesis, University of Washington, Washington, DC, 2001.
X. Glipa, Email to author, 31 October 2001.
M. Rikukawa, Email to author, 31 October 2001.
D. DesMarteau, Email to author, 31 October 2001.
Wainright, 1998, High pressure electrical conductivity studies of acid doped polybenzimidazole, Electrochim. Acta, 43, 1289, 10.1016/S0013-4686(97)10032-9
J. Wei, C. Stone, A. Steck, US patent 5,422,411, 6 June (1995).
F. Helmer-Metzman, F. Osan, A. Schneller, H. Ritter, K. Ledjeff, R. Nolte, R. Thorwirth, US patent 5,438,082, August (1995).
B. Bahar, A. Hobson, J. Kolde, D. Zuckerbrod, US patent 5,547,551, 20 August (1996).
Kreuer, 1997, On the development of proton conducting materials for technological applications, Solid State Ionics, 97, 1, 10.1016/S0167-2738(97)00082-9
H. Miyake, The design and development of Flemion® membranes, Modern Chlor-Alkali Technology 5, pp. 59–67.
A. Clark, Lubrizol Corporation, Wickliffe, OH. Email to author, 28 August 2001.
Hietala, 1999, Phase separation and crystallinity in proton conducting membranes of styrene grafted and sulfonated poly(vinyldenefluoride), J. Polym. Sci., 37, 1741, 10.1002/(SICI)1099-0518(19990615)37:12<1741::AID-POLA3>3.0.CO;2-5
G. Holleck, ECI Laboratories. Email to author, 4 September 2002.
Los Alamos National Laboratory Home page (1998). Available from World Wide Web: http://www.ott.doe.gov/pdfs/contractor.pdf. Last retrieved 5 November 2001.
M. Iwase, S. Kawatsu, Optimized CO tolerant electrocatalysts for polymer electrolyte fuel cells, in: Proceedings of the First International Symposium on Proton Conducting Membrane Fuel Cells, vol. 1, 1995, pp. 12–18.
R.J. Bellows, E. Marucchi-Soos, R.P. Reynolds, Proposed Mechanism of CO mitigation in PEMFC’s, using dilute H2O2 in the anode humidifier, in: Proceedings of the Second International Symposium on the Proton Conducting Membrane Fuel Cells, vol. 2, 1998, pp. 121–126.
J. Bauman, T. Zawodzinski, T. Rockward, P. Haridoss, F. Uribe, S. Gottesfeld, Enhanced CO tolerance in polymer electrolyte fuel cells with Pt-Mo anodes, in: Proceedings of the Second International Symposium on the Proton Conducting Membrane Fuel Cells, vol. 2, 1998, pp. 200–204.
G.L. Holleck, D.M. Pasquariello, S.L. Clauson, Carbon monoxide tolerant anodes for proton exchange membrane (PEM) fuel cells. II. Alloy catalyst development, in: Proceedings of the Second International Symposium on Proton Conducting Membrane Fuel Cells, vol. 2, 1998, pp. 150–155.
M.C. Denis, G. Lalande, D. Guay, J.P. Dodelet, R. Schulz, Performing CO tolerant anode catalyst for polymer electrolyte fuel cells, in: Proceedings of the Second International Symposium on the Proton Conducting Membrane Fuel Cells, vol. 2, 1998, pp. 209–271.
J.P. Dodelet, M.C. Denis, P. Gouerec, D. Guay, R. Schulz, in: Proceedings of the Fuel Cell Program and Abstracts on the CO Tolerant Anode Catalysts for Fuel Cells Made by High Energy Ball-Milling, 2000, pp. 51–54.
D. Dubois, J. Ohi, Cathode Catalyst, Fuel Cell for Transportation, 1999 Annual Progress Report Energy Conversion Team, pp. 107–110. Also available from World Wide Web: http://www.ott.doe.gov/pdfs/fuelcellpdf.pdf. Last retrieved on 2 January 2002.
P.N. Ross, N.M. Markovic, T.J. Schmidt, V. Stamenkovic, New Electrocatalysts for Fuel Cells, Transportation Fuel Cell Power System, 2000 Annual Progress Report, 2000, pp. 115–118.
G. Faubert, R. Cote, J.P. Dodelet, A new method to prepare non-noble metal based catalysts for the reduction of oxygen in polymer electrolyte fuel cells, in: Proceedings of the Second International Symposium on the Proton Conducting Membrane Fuel Cells, vol. 2, 1998, pp. 31–38.
A.L.N. Pinheiro, A.O. Neto, E.C. De Souza, J. Perez, V.A. Paganin, E.A. Ticianelli, E.R. Gonzalez, in: Proceedings of the Fuel Cell—Program and Abstracts on the Electro-Catalysis of PEM Fuel Cell Reaction on Noble Metal and Noble Metal Alloys, 2000, pp. 63–66.
K. Stroh, Los Alamos National Laboratory, Los Alamos, NM, E-mail to author, 2 January 2001.
Bevers, 1998, Innovative production procedure for low cost PEFC electrodes and electrode membrane structures, Int. J. Hydrogen Energy, 23, 57, 10.1016/S0360-3199(97)00028-1
Cha, 1999, Performance of proton exchange membrane fuel cell electrodes prepared by direct deposition of ultra thin platinum on the membrane surface, J. Electrochem. Soc., 146, 4055, 10.1149/1.1392591
Ralph, 1997, Low cost electrodes for proton exchange membrane fuel cells, J. Electrochem. Soc., 144, 3845, 10.1149/1.1838101
J.G. Drobny, Technology of Fluropolymers, CRC Press, Boca Raton, 2001.
Wainright, 1998, High pressure electrical conductivity studies of acid doped polybenzimidazole, Electrochim. Acta, 43, 1289, 10.1016/S0013-4686(97)10032-9
D. Schulz, US patent 4,014,725, 29 March (1977).
I.D. Raistrick, Modified gas diffusion electrode for proton exchange membrane fuel cells, in: Proceedings of the Symposium on the Diaphragms, Separators and Ion exchange Membrane, pp. 172–177.
Ticianelli, 1998, Methods to advance technology of proton exchange membrane fuel cells, J. Electrochem. Soc., 135, 2209, 10.1149/1.2096240
S. Srinivasan, A. Ferreira, R. Mosdale, S. Mukerjee, J. Kim, S. Hirano, S. Lee, F. Buchi, A. Appleby, in: Proceedings of the Fuel Cell—Program and Abstracts on the Proton Exchange Membrane Fuel Cells For Space And Electric Vehicle Application, 1994, pp. 424–427.
Taylor, 1992, Preparation of high platinum untilization gas diffusion electrode for proton exchange membrane fuel cells, J. Electrochem. Soc., 139, L45, 10.1149/1.2069439
S. Foster, P. Mitchell, R. Mortimer, in: Proceedings of the Fuel Cell—Program and Abstracts on the Development of a Novel Electrode Fabrication Technique For Use In Solid Polymer Fuel Cells, 1994, pp. 442–443.
Fedkiw, 1989, An impregnation reduction method to prepare electrodes on Nafion SPE, J. Electrochem. Soc., 136, 899, 10.1149/1.2096772
Gulzow, 2000, Dry layer preparation and characterization of polymer electrolyte fuel cell components, J. Power Sources, 86, 352, 10.1016/S0378-7753(99)00451-6
T. Matsubayashi, A. Hamada, S. Taniguchi, Y. Miyake, T. Saito, in: Proceedings of the Fuel Cell–Program and Abstracts on the Development Of The High Performance Electrode For PEFC, 1994, pp. 581-584.
Gottesfeld, 1992, High performance catalyzed membrane of ultra-low Pt loading for polymer electrolyte fuel cells, J. Electrochem. Soc., 139, L28, 10.1149/1.2069277
Gottesfeld, 1992, Thin film catalyst layers for polymer electrolyte fuel cell electrodes, J. Appl. Electrochem., 22, 1, 10.1007/BF01093004
E. Stuve, Chair and Professor of Chemical Engineering, University of Washington, Personal Communication, 2001.
J. Allen, in: Proceedings of the Fuel Cell—Program and Abstracts on the Bipolar Separator and Current Collector Design and Manufacture, 1994, pp. 424–427.
A. Woodman, E. Anderson, K. Jayne, M. Kimble, Physical Science Inc. Home Page, 1999, Development of corrosion-resistant coatings for fuel cell bipolar plates. Available at World Wide Web: http://www.psicorp.com/html/pubs/Subjects/FuelCell.htm. Last retrieved 5 November 2001.
K.D. Jayne, Physical Science Laboratory, Andover, MA. Email to author, 7 August 2001.
I. Zafar, J. Guiheen, N. Dave, R. Timothy, World Patent WO00,128,019, 19 April (2001).
T. Matsumoto, J. Niikura, H. Ohara, M. Uchida, H. Gyoten, K. Hatoh, E. Yasumoto, T. Kanbara, K. Nishida, Y. Sugawara, Europeon Patent EP1094535, 25 April (2001).
M.S.Wilson, Los Alamos National Laboratory, Los Alamos, NM. Email to author, 4 February 2002.
P. Blaine, Micro Molding Technology LLC, Boynton Beach, FL. Email to author, 3 October 2001.
R. Lawrence, US patent 4,214,969, 29 July (1980).
K. Ledjeff-Hey, F. Mahlendorf, O. Niemzig, A. Trautmann, G. Mercator, in: Proceedings of the Fuel Cell—Program and Abstracts on the Electronically conducting composite materials as bipolar plates for PEM fuel cells, 1998, pp. 570–573.
A. Pellegri, P. Spaziante, US patent 4,197,178, 8 April (1980).
R. Emanuelson, W. Luoma, W. Taylor, US patent 4,301,222, 17 November (1981).
Stewart Jr., C. Robert, US patent 4,670,300, 2 June (1987).
T. Uemura, S. Murakami, US patent 4,737,421, 12 April (1988).
T. Besmann, J. Klett, T. Burchell, Carbon composite for a PEM fuel cell bipolar plate, in: Proceedings of the Materials Research Society Symposium on the Materials for Electrochemical Energy Storage and Conversion-II—Batteries, Capacitors and Fuel Cells, vol. 496, 1998, pp. 243–248.
R. Meissner, M. Irgang, K. Eger, P. Weidlich, H. Dreyer, US patent 5,736,076, 7 April (1998).
M.A. Curran, Life Cycle Assessment, Amazon Hill, 1996.
International Organization for Standardization, ISO14040: Life Cycle Assessment—Principles and Framework, 1997.
W. Klöpffer, O. Hutzinger, LCA Documents: Life Cycle Assessment—State-of-the-Art and Research Priorities, Eco-Informa Press, 1997.