Research status of laser additive manufacturing for metal: a review
Tóm tắt
Từ khóa
Tài liệu tham khảo
Chen, 2016, The research status and development trend of additive manufacturing technology, Int J Adv Manuf Technol, 89, 3651, 10.1007/s00170-016-9335-4
Ngo, 2018, Additive manufacturing (3D printing): a review of materials, methods, applications and challenges, Compos B Eng, 143, 172, 10.1016/j.compositesb.2018.02.012
Carter, 2014, The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy, J Alloys Compd, 615, 338, 10.1016/j.jallcom.2014.06.172
Kelly, 2019, The effect of surface topography and porosity on the tensile fatigue of 3D printed Ti-6Al-4V fabricated by selective laser melting, Mater Sci Eng C-Biomimetic Supramol., 98, 726, 10.1016/j.msec.2019.01.024
Gardan, 2015, Additive manufacturing technologies: state of the art and trends, Int J Prod Res, 54, 3118, 10.1080/00207543.2015.1115909
Javaid, 2019, Current status and challenges of Additive manufacturing in orthopaedics: an overview, J Clin Orthop Trauma, 10, 380, 10.1016/j.jcot.2018.05.008
2012
Murr, 2012, Metal fabrication by additive manufacturing using laser and electron beam melting technologies, J Mater Sci Technol, 28, 1, 10.1016/S1005-0302(12)60016-4
Chua, 2003
Lü, 2001
Huang, 2013, Additive manufacturing and its societal impact: a literature review, Int J Adv Manuf Technol, 67, 1191, 10.1007/s00170-012-4558-5
Bikas, 2016, Additive manufacturing methods and modelling approaches: a critical review, Int J Adv Manuf Technol, 83, 389, 10.1007/s00170-015-7576-2
Ligon, 2017, Polymers for 3D printing and customized additive manufacturing, Chem Rev, 117, 10212, 10.1021/acs.chemrev.7b00074
Ligon-Auer, 2016, Toughening of photo-curable polymer networks: a review, Polym Chem, 7, 257, 10.1039/C5PY01631B
Layani, 2018, Novel materials for 3D printing by photopolymerization, Adv Mater, 30, 1706344, 10.1002/adma.201706344
Santos, 2013, Additive manufacturing techniques for scaffold based cartilage tissue engineering, Virtual Phys Prototyp, 8, 175, 10.1080/17452759.2013.838825
Do, 2015, 3D printing of scaffolds for tissue regeneration applications, Adv Healthc Mater., 4, 1742, 10.1002/adhm.201500168
Vaezi, 2013, Multiple material additive manufacturing - part 1: a review, Virtual Phys Prototyp, 8, 19, 10.1080/17452759.2013.778175
Chacón, 2017, Additive manufacturing of PLA structures using fused deposition modelling: effect of process parameters on mechanical properties and their optimal selection, Mater Des, 124, 143, 10.1016/j.matdes.2017.03.065
Zhang, 2018, Reprocessable thermosets for sustainable three-dimensional printing, Nat Commun, 9, 1831, 10.1038/s41467-018-04292-8
Gu, 2012, Laser additive manufacturing of metallic components: materials, processes and mechanisms, Int Mater Rev, 57, 133, 10.1179/1743280411Y.0000000014
King, 2015, Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges, Phys Rev Appl, 2, 10.1063/1.4937809
Mahamood, 2013, Characterizing the effect of laser power density on microstructure, microhardness, and surface finish of laser deposited titanium alloy, J Manuf Sci Eng-Trans ASME, 135, 10.1115/1.4025737
Lewandowski, 2016, Metal additive manufacturing: a review of mechanical properties, Annu Rev Mater Sci, 46, 151, 10.1146/annurev-matsci-070115-032024
Singh, 2017, Material issues in additive manufacturing: a review, J Manuf Process, 25, 185, 10.1016/j.jmapro.2016.11.006
Das, 1998, Producing metal parts with selective laser sintering/hot isostatic pressing, JOM-J Miner Met Mater Soc, 50, 17, 10.1007/s11837-998-0299-1
Tolochko, 2002, Dental root implants produced by the combined selective laser sintering/melting of titanium powders, Proc Inst Mech Eng Pt. L-J Mater-Design Appl, 216, 267
Atwood, 1998, Laser engineered net shaping (LENS™): a tool for direct fabrication of metal parts, 1
Schlienger, 1998, Near Net Shape production of metal components using LENS, 1581
Mazumder, 1999, Direct materials deposition: designed macro and microstructure, Mater Res Innovat, 3, 118, 10.1007/s100190050137
Chen, 2017, Direct metal writing: controlling the rheology through microstructure, Appl Phys Lett, 110
Buchanan, 2019, Metal 3D printing in construction: a review of methods, research, applications, opportunities and challenges, Eng Struct, 180, 332, 10.1016/j.engstruct.2018.11.045
Hirt, 2017, Additive manufacturing of metal structures at the micrometer scale, Adv Mater, 29, 1604211, 10.1002/adma.201604211
Wang, 2019, Phase constituent control and correlated properties of titanium aluminide intermetallic alloys through dual-wire arc additive manufacturing, Mater Lett, 242, 111, 10.1016/j.matlet.2019.01.112
Williams, 2016, Wire plus arc additive manufacturing, Mater Sci Technol, 32, 641, 10.1179/1743284715Y.0000000073
Gokuldoss, 2017, Additive manufacturing processes: selective laser melting, electron beam melting and binder jetting-selection guidelines, Materials, 10, 672, 10.3390/ma10060672
Ahn, 2017, Mechanical and microstructural characteristics of commercial purity titanium implants fabricated by electron-beam additive manufacturing, Mater Lett, 187, 64, 10.1016/j.matlet.2016.10.064
Dinda, 2008, Fabrication of Ti-6Al-4V scaffolds by direct metal deposition, Metall Mater Trans A-Phys Metall Mater Sci, 39, 2914, 10.1007/s11661-008-9634-y
Kumar, 2014, Selective laser sintering/melting, 93
Schaedler, 2016, Architected cellular materials, Annu Rev Mater Sci, 46, 187, 10.1146/annurev-matsci-070115-031624
Hu, 2018, Functional inks and printing of two-dimensional materials, Chem Soc Rev, 47, 3265, 10.1039/C8CS00084K
Parra-Cabrera, 2018, 3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors, Chem Soc Rev, 47, 209, 10.1039/C7CS00631D
Xing, 2015, Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery, Chem Soc Rev, 44, 5031, 10.1039/C5CS00278H
Capel, 2018, 3D printing for chemical, pharmaceutical and biological applications, Nat Rev Chem, 2, 422, 10.1038/s41570-018-0058-y
Fu, 2017, Progress in 3D printing of carbon materials for energy-related applications, Adv Mater, 29, 1603486, 10.1002/adma.201603486
Kruth, 2005, Binding mechanisms in selective laser sintering and selective laser melting, Rapid Prototyp J, 11, 26, 10.1108/13552540510573365
Frazier, 2014, Metal additive manufacturing: a review, J Mater Eng Perform, 23, 1917, 10.1007/s11665-014-0958-z
Long, 2016, The influence of scanning methods on the cracking failure of thin-wall metal parts fabricated by laser direct deposition shaping, Eng Fail Anal, 59, 269, 10.1016/j.engfailanal.2015.10.011
Fang, 2015, The effects of solid-state phase transformation upon stress evolution in laser metal powder deposition, Mater Des, 87, 807, 10.1016/j.matdes.2015.08.061
Dawes, 2015, Introduction to the additive manufacturing powder metallurgy supply chain exploring the production and supply of metal powders for AM processes, Johns Matthey Technol Rev, 59, 243, 10.1595/205651315X688686
Herbert, 2016, Viewpoint: metallurgical aspects of powder bed metal additive manufacturing, J Mater Sci, 51, 1165, 10.1007/s10853-015-9479-x
Murr, 2012, Microstructures and properties of 17-4 PH stainless steel fabricated by selective laser melting, J Mater Sci Technol, 1, 167
Kruth, 2003, Lasers and materials in selective laser sintering, Assemb Autom, 23, 357, 10.1108/01445150310698652
Gu, 2009, Microstructural characteristics and formation mechanism of direct laser-sintered Cu-based alloys reinforced with Ni particles, Mater Des, 30, 2099, 10.1016/j.matdes.2008.08.036
Weng, 2016, Microstructure and property of composite coatings on titanium alloy deposited by laser cladding with Co42+TiN mixed powders, J Alloys Compd, 686, 74, 10.1016/j.jallcom.2016.05.319
Fischer, 2005, Highly precise pulsed selective laser sintering of metallic powders, Laser Phys Lett, 2, 48, 10.1002/lapl.200410118
Gusarov, 2001, Numerical simulation of laser solid state sintering of loose titanium powder, 1
Van Der Schueren, 1996
Kruth, 2007, Consolidation phenomena in laser and powder-bed based layered manufacturing, CIRP Ann - Manuf Technol, 56, 730, 10.1016/j.cirp.2007.10.004
Prabhu, 1993, Supersolidus liquid phase selective laser sintering of prealloyed bronze powder, 317
Niu, 1998, Liquid phase sintering of M3/2 high speed steel by selective laser sintering, Scripta Mater, 39, 67, 10.1016/S1359-6462(98)00126-2
Sercombe, 2003, Rapid manufacturing of aluminium components, Science, 301, 1225, 10.1126/science.1086989
Levy, 2003, Rapid manufacturing and rapid tooling with layer manufacturing (lm) technologies, state of the art and future perspectives, CIRP Ann - Manuf Technol, 52, 589, 10.1016/S0007-8506(07)60206-6
Hollander, 2003, Development of individual three-dimensional bone substitutes using "selective laser melting", Eur J Trauma, 29, 228, 10.1007/s00068-003-1332-2
Wright, 2006, Selective laser melting of prealloyed high alloy steel powder beds, Mater Sci Forum, 514, 516, 10.4028/www.scientific.net/MSF.514-516.516
Poprawe, 2006, The future of high power laser techniques, 34602
Olakanmi, 2015, A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties, Prog Mater Sci, 74, 401, 10.1016/j.pmatsci.2015.03.002
Meier, 2008, Experimental studies on selective laser melting of metallic parts, Mater Werkst, 39, 665, 10.1002/mawe.200800327
Yasa, 2011, Manufacturing by combining selective laser melting and selective laser erosion/laser re-melting, CIRP Ann-Manuf Technol, 60, 263, 10.1016/j.cirp.2011.03.063
Yap, 2015, Review of selective laser melting: materials and applications, Appl Phys Rev, 2, 10.1063/1.4935926
Zhang, 2019, Microstructure evolution during selective laser melting of metallic materials: a review, J Laser Appl, 31, 10.2351/1.5085206
Gu, 2012, Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium, Acta Mater, 60, 3849, 10.1016/j.actamat.2012.04.006
Verhaeghe, 2009, A pragmatic model for selective laser melting with evaporation, Acta Mater, 57, 6006, 10.1016/j.actamat.2009.08.027
Shiomi, 2004, Residual stress within metallic model made by selective laser melting process, CIRP Ann - Manuf Technol, 53, 195, 10.1016/S0007-8506(07)60677-5
Ion, 2005, Laser processing of engineering materials, Mater Today, 8, 289
Yan, 2017, Grain structure control of additively manufactured metallic materials, Materials, 10, 1260, 10.3390/ma10111260
David, 2003, Welding: solidification and microstructure, JOM-J Miner Met Mater Soc, 55, 14, 10.1007/s11837-003-0134-7
Thijs, 2010, A study of the microstructural evolution during selective laser melting of Ti-6Al-4V, Acta Mater, 58, 3303, 10.1016/j.actamat.2010.02.004
Vrancken, 2012, Heat treatment of Ti6Al4V produced by selective laser melting: microstructure and mechanical properties, J Alloy Compd, 541, 177, 10.1016/j.jallcom.2012.07.022
Aboulkhair, 2014, Reducing porosity in AlSi10Mg parts processed by selective laser melting, Addit Manuf, 1–4, 77
Wu, 2021, Process-structure-property relationships in laser powder bed fusion of permanent magnetic Nd-Fe-B, Mater Des, 209, 109992, 10.1016/j.matdes.2021.109992
Liu, 2003, Fabrication of functionally graded TiC/Ti composites by laser engineered net shaping, Scripta Mater, 48, 1337, 10.1016/S1359-6462(03)00020-4
Brooks, 1999, Microstructure and property optimization of LENS deposited H13 tool steel, 375
Mazumder, 2000, Closed loop direct metal deposition: art to part, Opt Laser Eng, 34, 397, 10.1016/S0143-8166(00)00072-5
Chen, 2003, The hot cracking mechanism of 316L stainless steel cladding in rapid laser forming process, Rare Met Mater Eng, 32, 183
Yang, 2003, The mechanics properties of the Rene95 samples produced by the laser rapid forming process, Rare Met Mater Eng, 32, 276
Li, 2003, The influences of processing parameters on forming characterizations during laser rapid forming, Mater Sci Eng A-Struct Mater Prop, 360, 18, 10.1016/S0921-5093(03)00435-0
Yang, 2004, Experimental study on residual stress distribution of laser rapid forming process, Rare Met Mater Eng, 33, 1304
Wu, 2013, A review of laser fabrication of metallic engineering components and of materials, Mater Sci Technol, 23, 631, 10.1179/174328407X179593
Zhong, 2015
Wang, 2009, Experimental and numerical study of the LENS rapid fabrication process, J Manuf Sci Eng-Trans ASME, 131, 481, 10.1115/1.3173952
Yu, 2010, Mechanics and energy analysis on molten pool spreading during laser solid forming, Appl Surf Sci, 256, 4612, 10.1016/j.apsusc.2010.02.060
Tan, 2010, Process analysis for laser solid forming of thin-wall structure, Int J Mach Tool Manufact, 50, 1, 10.1016/j.ijmachtools.2009.10.003
Zheng, 2008, Thermal behavior and microstructure evolution during laser deposition with laser-engineered net shaping: Part II. Experimental investigation and discussion, Metall Mater Trans A-Phys Metall Mater Sci, 39, 2237, 10.1007/s11661-008-9566-6
Dutta, 2011, Additive manufacturing by direct metal deposition, Adv Mater Process, 169, 33
Dutta, 2009, Direct metal deposition, Adv Mater Process, 167, 29
Yilmaz, 2016, Shaped metal deposition technique in additive manufacturing: a review, Proc Inst Mech Eng Part B-J Eng Manuf, 230, 1781, 10.1177/0954405416640181
Li, 2006, Repair of directionally solidified superalloy GTD-111 by laser-engineered net shaping, J Mater Sci, 41, 7886, 10.1007/s10853-006-0948-0
Zhai, 2013, Novel forming of Ti-6Al-4V by laser engineered net shaping, Mater Sci Forum, 765, 393, 10.4028/www.scientific.net/MSF.765.393
Das, 2013, Fabrication of biomedical implants using laser engineered net shaping (LENSTM), Trans Indian Ceram Soc, 72, 169, 10.1080/0371750X.2013.851619
Palčič, 2009, Potential of laser engineered net shaping (LENS) technology, Mater Manuf Process, 24, 750, 10.1080/10426910902809776
Krishna, 2007, Low stiffness porous Ti structures for load-bearing implants, Acta Biomater, 3, 997, 10.1016/j.actbio.2007.03.008
Gnedenkov, 2018, Direct laser deposition as a method of biodegradable magnesium implant manufacturing, J Phys Conf Series, 1092, 10.1088/1742-6596/1092/1/012044
Kini, 2020, In-situ synthesis via laser metal deposition of a lean Cu-3.4Cr-0.6Nb (at%) conductive alloy hardened by Cr nano-scale precipitates and by Laves phase micro-particles, Acta Mater, 197, 330, 10.1016/j.actamat.2020.07.035
Watanabe, 2015, Laser direct writing on copper nanoparticle film by light scribe technique, J Photopolym Sci Technol, 28, 99, 10.2494/photopolymer.28.99
Qin, 2014, Conductive network structure formed by laser sintering of silver nanoparticles, J Nanoparticle Res, 16, 2684, 10.1007/s11051-014-2684-8
Qin, 2014, Copper film prepared from copper fine particle paste by laser sintering at room temperature: influences of sintering atmosphere on the morphology and resistivity, Jpn J Appl Phys, 53, 10.7567/JJAP.53.096501
Qin, 2014, Effect of copper nanoparticle addition on the electrical and optical properties of thin films prepared from silver nanoparticles, J Mater Sci, 50, 49, 10.1007/s10853-014-8564-x
Klotzbach, 2016, Formation of copper micropatterns by laser direct writing using copper nanoparticle ink, 97360D
Levi, 2018, Changing the way we manufacture - AM in technical ceramics, Met Powder Rep, 73, 314, 10.1016/j.mprp.2018.03.047
Oh, 2019, Microwave dielectric properties of zirconia fabricated using NanoParticle Jetting™, Addit. Manuf., 27, 586
Alamos, 2020, Effect of powder reuse on mechanical properties of Ti-6Al-4V produced through selective laser melting, Int J Refract Metals Hard Mater, 91, 105273, 10.1016/j.ijrmhm.2020.105273
Niinomi, 2012, Development of new metallic alloys for biomedical applications, Acta Biomater, 8, 3888, 10.1016/j.actbio.2012.06.037
Ferreri, 2020, Non-acid, alcohol-based electropolishing enables high-quality electron backscatter diffraction characterization of titanium and its alloys: application to pure Ti and Ti-6Al-4V, Mater Char, 166, 110406, 10.1016/j.matchar.2020.110406
Na, 2018, Effect of laser power on oxygen and nitrogen concentration of commercially pure titanium manufactured by selective laser melting, Mater Char, 143, 110, 10.1016/j.matchar.2018.03.003
Huang, 2020, Laser powder bed fusion of titanium-tantalum alloys: compositions and designs for biomedical applications, J Mech Behav Biomed Mater, 108, 103775, 10.1016/j.jmbbm.2020.103775
Attar, 2017, Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes, Mater Sci Eng A-Struct Mater Prop, 705, 385, 10.1016/j.msea.2017.08.103
Montufar, 2020, Benchmarking of additive manufacturing technologies for commercially pure-titanium bone-tissue-engineering scaffolds: processing-microstructure property relationship, Addit Manuf, 36, 101516
Wen, 2018, Densification behavior of pure Zn metal parts produced by selective laser melting for manufacturing biodegradable implants, J Mater Process Technol, 258, 128, 10.1016/j.jmatprotec.2018.03.007
Chen, 2019, Laser additive manufacturing of Zn metal parts for biodegradable implants: effect of gas flow on evaporation and formation quality, J Laser Appl, 31, 10.2351/1.5096118
Han, 2016, Characterisation and milling time optimisation of nanocrystalline aluminium powder for selective laser melting, Int J Adv Manuf Technol, 88, 1429, 10.1007/s00170-016-8866-z
Higashi, 2020, Selective laser melting of pure molybdenum: evolution of defect and crystallographic texture with process parameters, Mater Des, 191, 108588, 10.1016/j.matdes.2020.108588
Huang, 2020, Pure copper components fabricated by cold spray (CS) and selective laser melting (SLM) technology, Surf Coating Technol, 395, 125936, 10.1016/j.surfcoat.2020.125936
Li, 2016, Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off, Nature, 534, 227, 10.1038/nature17981
Koyama, 2017, Bone-like crack resistance in hierarchical metastable nanolaminate steels, Science, 355, 1055, 10.1126/science.aal2766
Gludovatz, 2014, A fracture-resistant high-entropy alloy for cryogenic applications, Science, 345, 1153, 10.1126/science.1254581
Chen, 2019, Microscale residual stresses in additively manufactured stainless steel, Nat Commun, 10, 4338, 10.1038/s41467-019-12265-8
Gerstgrasser, 2021, CA single track microstructure simulation of nickel base alloy CM247LC and stainless steel S316L, including experimental validation of S316L, Mater Des, 199, 109395, 10.1016/j.matdes.2020.109395
Alvi, 2020, High temperature tribology and wear of selective laser melted (SLM) 316L stainless steel, Wear, 448–449, 203228, 10.1016/j.wear.2020.203228
Hatami, 2020, Fatigue strength of 316 L stainless steel manufactured by selective laser melting, J Mater Eng Perform, 29, 3183, 10.1007/s11665-020-04859-x
Wang, 2018, Additively manufactured hierarchical stainless steels with high strength and ductility, Nat Mater, 17, 63, 10.1038/nmat5021
Shi, 2010, Study on the technique during selective laser melting of stainless steel powder, Electromachining & Mould, SI, 67
Abolhasani, 2019, Analysis of melt-pool behaviors during selective laser melting of AISI 304 stainless-steel composites, Metals, 9, 876, 10.3390/met9080876
Huang, 2019, Mechanical properties of 304 austenite stainless steel manufactured by laser metal deposition, Mater Sci Eng A-Struct Mater Prop, 758, 60, 10.1016/j.msea.2019.04.108
Ferguson, 2015, Semi-empirical model of deposit size and porosity in 420 stainless steel and 4140 steel using laser engineered net shaping, J Manuf Process, 19, 163, 10.1016/j.jmapro.2015.06.026
Vamsi Krishna, 2009, Surface modification of AISI 410 stainless steel using laser engineered net shaping (LENSTM), Mater Des, 30, 1490, 10.1016/j.matdes.2008.08.003
Hu, 2017, Experimental investigation on selective laser melting of 17-4PH stainless steel, Opt Laser Technol, 87, 17, 10.1016/j.optlastec.2016.07.012
Wang, 2020, A short review on selective laser melting of H13 steel, Int J Adv Manuf Technol, 108, 2453, 10.1007/s00170-020-05584-4
Wołosz, 2020, The influence of laser engineered net shaping (LENS™) technological parameters on the laser deposition efficiency and properties of H13 (AISI) steel, J Alloys Compd, 823, 153840, 10.1016/j.jallcom.2020.153840
Tang, 2020, Numerical simulation of selective laser melting temperature conduction behavior of H13 steel in different models, Optik, 201, 163336, 10.1016/j.ijleo.2019.163336
Bailey, 2017, Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses, J Mater Process Technol, 247, 223, 10.1016/j.jmatprotec.2017.04.020
Wang, 2020, Thermal fatigue properties of H13 hot-work tool steels processed by selective laser melting, Metals, 10, 116, 10.3390/met10010116
Yan, 2020, High strength (~2000 MPa) or highly ductile (~11%) additively manufactured H13 by tempering at different conditions, Mater Sci Eng A-Struct Mater Prop, 773, 138845, 10.1016/j.msea.2019.138845
Weng, 2014, Research status of laser cladding on titanium and its alloys: a review, Mater Des, 58, 412, 10.1016/j.matdes.2014.01.077
Harun, 2018, A review of powdered additive manufacturing techniques for Ti-6Al-4V biomedical applications, Powder Technol, 331, 74, 10.1016/j.powtec.2018.03.010
Tong, 2016, Mechanical properties of titanium-based Ti-6Al-4V alloys manufactured by powder bed additive manufacture, Mater Sci Technol, 33, 138, 10.1080/02670836.2016.1172787
Zhang, 2020, A comprehensive study on fused filament fabrication of Ti-6Al-4V structures, Addit. Manuf., 34, 101256
Wei, 2018, Effect of laser energy density on microstructures and mechanical properties of selective laser melted Ti-6Al-4V alloy, Int J Mater Res, 109, 437, 10.3139/146.111615
Okyar, 2014, Comparison of fatigue crack growth rate of selective laser sintered Rapid Steel via computational fracture mechanics, Int J Mater Res, 105, 552, 10.3139/146.111076
Phaiboonworachat, 2016, Cyclic elastoplastic behaviour, hardness and microstructural properties of Ti-6Al-4V manufactured through selective laser melting, Int J Mater Eng Innovat, 7, 80, 10.1504/IJMATEI.2016.077324
Artzt, 2020, Pandora's box-influence of contour parameters on roughness and subsurface residual stresses in laser powder bed fusion of Ti-6Al-4V, Materials, 13, 3348, 10.3390/ma13153348
Mower, 2016, Mechanical behavior of additive manufactured, powder-bed laser-fused materials, Mater Sci Eng A-Struct Mater Prop, 651, 198, 10.1016/j.msea.2015.10.068
Quintana, 2018, Effects of reusing Ti-6Al-4V powder in a selective laser melting additive system operated in an industrial setting, JOM-J Miner Met Mater Soc, 70, 1863, 10.1007/s11837-018-3011-0
Liu, 2013, Microstructure and tensile properties of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy, Mater Sci Eng A-Struct Mater Prop, 586, 323, 10.1016/j.msea.2013.08.032
Qian, 2014, Microstructure of TA2/TA15 graded structural material by laser additive manufacturing process, Trans Nonferrous Metals Soc China, 24, 2729, 10.1016/S1003-6326(14)63404-X
Liang, 2014, Compositional variation and microstructural evolution in laser additive manufactured Ti/Ti-6Al-2Zr-1Mo-1V graded structural material, Mater Sci Eng A-Struct Mater Prop, 599, 242, 10.1016/j.msea.2014.01.092
Qiu, 2015, Microstructural control during direct laser deposition of a β-titanium alloy, Mater Des, 81, 21, 10.1016/j.matdes.2015.05.031
Zhang, 2013, Microstructure evolution of laser deposited Ti60A titanium alloy during cyclic thermal exposure, Trans Nonferrous Metals Soc China, 23, 3249, 10.1016/S1003-6326(13)62860-5
Zhang, 2015, Texture and microstructure characterization in laser additive manufactured Ti-6Al-2Zr-2Sn-3Mo-1.5Cr-2Nb titanium alloy, Mater Des, 88, 550, 10.1016/j.matdes.2015.09.053
Liang, 2015, Wearing and corrosion resistance of TAMZ alloy implanted by carbon ion in Hank's body fluid, Rare Met Mater Eng, 44, 3045, 10.1016/S1875-5372(16)60048-6
Zhao, 2013, Effects of carbon and nitrogen plasma immersion ion implantation on in vitro and in vivo biocompatibility of titanium alloy, ACS Appl Mater Interfaces, 5, 1510, 10.1021/am302961h
Zhang, 2011, Manufacture by SLM and mechanical behaviour of biomedical Ti-24Nb-4Zr-8Sn alloy, Scripta Mater, 65, 21, 10.1016/j.scriptamat.2011.03.024
Adrian, 2012
Bhadeshia, 2003
Jinoop, 2019, Laser-assisted directed energy deposition of nickel super alloys: a review, Proc Inst Mech Eng Pt L, 233, 2376
Gui, 2017, The intrinsic relationship between microstructure evolution and thermal fatigue behavior of a single-crystal cobalt-base superalloy, Acta Metall Sin-Eng Lett, 30, 1192, 10.1007/s40195-017-0646-8
Wang, 2013, Microstructure and mechanical properties of Co-Al-W-Ta-Nb alloys at room- and high-temperatures, Rare Met Mater Eng, 42, 1003
Meng, 2018, Microstructure and heating treatment of DZ40M prepared by laser additive manufacturing, Chin J Lasers, 45, 1002008, 10.3788/CJL201845.1002008
Liu, 2020, The effect of energy density on texture and mechanical anisotropy in selective laser melted Inconel 718, Mater Des, 191, 108642, 10.1016/j.matdes.2020.108642
McLouth, 2020, Variations in ambient and elevated temperature mechanical behavior of IN718 manufactured by selective laser melting via process parameter control, Mater Sci Eng A-Struct Mater Prop, 780, 139184, 10.1016/j.msea.2020.139184
Zhang, 2020, Mechanical properties and microstructure evolution of selective laser melting Inconel 718 along building direction and sectional dimension, Mater Sci Eng A-Struct Mater Prop, 794, 139941, 10.1016/j.msea.2020.139941
Parimi, 2014, Microstructural and texture development in direct laser fabricated IN718, Mater Char, 89, 102, 10.1016/j.matchar.2013.12.012
Lambarri, 2013, Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components, Opt Laser Eng, 51, 813, 10.1016/j.optlaseng.2013.01.011
Salvati, 2020, An analysis of fatigue failure mechanisms in an additively manufactured and shot peened IN 718 nickel superalloy, Mater Des, 191, 108605, 10.1016/j.matdes.2020.108605
Lopez-Galilea, 2019, Additive manufacturing of CMSX-4 Ni-base superalloy by selective laser melting: influence of processing parameters and heat treatment, Addit Manuf, 30, 100874
2016
Tomus, 2017, Effect of minor alloying elements on crack-formation characteristics of Hastelloy-X manufactured by selective laser melting, Addit Manuf, 16, 65
Montero-Sistiaga, 2020, Effect of temperature on the microstructure and tensile properties of micro-crack free hastelloy X produced by selective laser melting, Addit Manuf, 31, 100995
Kong, 2019, Anisotropic response in mechanical and corrosion properties of hastelloy X fabricated by selective laser melting, Constr Build Mater, 221, 720, 10.1016/j.conbuildmat.2019.06.132
Liu, 2019, Microstructure and tensile properties of GH3536 alloy formed by SLM, PTCA (Part A Phys Test), 55, 15
Aboulkhair, 2017, Selective laser melting of aluminum alloys, MRS Bull, 42, 311, 10.1557/mrs.2017.63
Trevisan, 2017, On the selective laser melting (SLM) of the AlSi10Mg alloy: process, microstructure, and mechanical properties, Materials, 10, 76, 10.3390/ma10010076
Wu, 2020, Effect of melting modes on microstructure and tribological properties of selective laser melted AlSi10Mg alloy, Virtual Phys Prototyp, 1, 1
Hanemann, 2019, In-situ alloying of AlSi10Mg+Si using selective laser melting to control the coefficient of thermal expansion, J Alloys Compd, 795, 8, 10.1016/j.jallcom.2019.04.260
Roth, 2021, Plasticity and fracture of cast and SLM AlSi10Mg: high-throughput testing and modeling, Addit Manuf, 43, 101998
Tan, 2020, Effect of processing parameters on the densification of an additively manufactured 2024 Al alloy, J Mater Sci Technol, 58, 34, 10.1016/j.jmst.2020.03.070
Opprecht, 2020, A solution to the hot cracking problem for aluminium alloys manufactured by laser beam melting, Acta Mater, 197, 40, 10.1016/j.actamat.2020.07.015
Xin, 2020, High-entropy alloys as a platform for catalysis: progress, challenges, and opportunities, ACS Catal, 10, 11280, 10.1021/acscatal.0c03617
Biswas, 2020, High entropy alloys: key issues under passionate debate, Scripta Mater, 188, 54, 10.1016/j.scriptamat.2020.07.010
Yan, 2020, Functional properties and promising applications of high entropy alloys, Scripta Mater, 187, 188, 10.1016/j.scriptamat.2020.06.017
Lu, 2020, Promising properties and future trend of eutectic high entropy alloys, Scripta Mater, 187, 202, 10.1016/j.scriptamat.2020.06.022
Alomar, 2020, A review of the selective laser melting lattice structures and their numerical models, Adv Eng Mater, 1, 2000611, 10.1002/adem.202000611
Lin, 2017, Tribological properties of FeCoCrNiAlBx high-entropy alloys coating prepared by laser cladding, J Iron Steel Res Int, 24, 184, 10.1016/S1006-706X(17)30026-2
Ni, 2018, Characterization of Al0.5FeCu0.7NiCoCr high-entropy alloy coating on aluminum alloy by laser cladding, Opt Laser Technol, 105, 257, 10.1016/j.optlastec.2018.01.058
Zhang, 2011, Microstructure and properties of 6FeNiCoSiCrAlTi high-entropy alloy coating prepared by laser cladding, Appl Surf Sci, 257, 2259, 10.1016/j.apsusc.2010.09.084
Jin, 2018, High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating, Appl Surf Sci, 445, 113, 10.1016/j.apsusc.2018.03.135
Kunce, 2015, Microstructural characterisation of high-entropy alloy AlCoCrFeNi fabricated by laser engineered net shaping, J Alloys Compd, 648, 751, 10.1016/j.jallcom.2015.05.144
Dobbelstein, 2019, Laser metal deposition of compositionally graded TiZrNbTa refractory highentropy alloys using elemental powder blends, Addit Manuf, 25, 252
Han, 2020, Recent advances on high-entropy alloys for 3D printing, Adv Mater, 32, 1903855, 10.1002/adma.201903855
Li, 2018, Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: processability, non-equilibrium microstructure and mechanical property, J Alloys Compd, 746, 125, 10.1016/j.jallcom.2018.02.298
Pickering, 2016, Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi, Scripta Mater, 113, 106, 10.1016/j.scriptamat.2015.10.025
Xiang, 2019, Microstructures and mechanical properties of CrMnFeCoNi high entropy alloys fabricated using laser metal deposition technique, J Alloys Compd, 773, 387, 10.1016/j.jallcom.2018.09.235
Zhu, 2018, Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting, Scripta Mater, 154, 20, 10.1016/j.scriptamat.2018.05.015