Research progresses in O3-type Ni/Fe/Mn based layered cathode materials for sodium ion batteries

Kubota K, Kumakura S, Yoda Y, Kuroki K, Komaba S (2018) Electrochemistry and solid-state chemistry of NaMeO2 (Me = 3d transition metals). Adv Energy Mater 8:1703415. https://doi.org/10.1002/aenm.201703415 Hwang JY, Myung ST, Sun YK (2017) Sodium-ion batteries: present and future. Chem Soc Rev 46:3529–3614. https://doi.org/10.1039/c6cs00776g Ren H, Li Y, Ni Q, Bai Y, Zhao H, Wu C (2022) Unraveling anionic redox for sodium layered oxide cathodes: breakthroughs and perspectives. Adv Mater 34:2106171. https://doi.org/10.1002/adma.202106171 Huang Z-X, Zhang X-L, Zhao X-X, Heng Y-L, Wang T, Geng H, Wu X-L (2022) Hollow Na0.62K0.05Mn0.7Ni0.2Co0.1O2 polyhedra with exposed stable {001} facets and K riveting for sodium-ion batteries, Sci. China.Mater 66;79–87. https://doi.org/10.1007/s40843-022-2157-8. Li J-Q, Yang Y-J, Pang J (2015) Electrochemical and structural performances of Li[Ni0.133Li0.2Co0.133Mn0.533]O2 material during different cycle potential windows, Rare Metals 41;2664–2670. https://doi.org/10.1007/s12598-015-0562-x. Goikolea E, Palomares V, Wang S, Larramendi IR, Guo X, Wang GX, Rojo T (2020) Na-ion batteries—approaching old and new challenges. Adv Energy Mater 10:2002055. https://doi.org/10.1002/aenm.202002055 Xiao Y, Abbasi NM, Zhu YF, Li S, Tan SJ, Ling W, Peng L, Yang TQ, Wang L, Guo XD, Yin YX, Zhang H, Guo YG (2020) Layered oxide cathodes promoted by structure modulation technology for sodium-ion batteries. Adv Funct Mater 30:2001334. https://doi.org/10.1002/adfm.202001334 Zuo W, Qiu J, Liu X, Ren F, Liu H, He H, Luo C, Li J, Ortiz GF, Duan H, Liu J, Wang MS, Li Y, Fu R, Yang Y (2020) The stability of P2-layered sodium transition metal oxides in ambient atmospheres. Nat Commun 11:3544. https://doi.org/10.1038/s41467-020-17290-6 Wang Y, Zhao X, Jin J, Shen Q, Zhang N, Qu X, Liu Y, Jiao L (2022) Low-cost layered oxide cathode involving cationic and anionic redox with a complete solid-solution sodium-storage behavior. Energy Storage Mater 47:44–50. https://doi.org/10.1016/j.ensm.2022.01.047 Yuan XG, Guo YJ, Gan L, Yang XA, He WH, Zhang XS, Yin YX, Xin S, Yao HR, Huang Z, Guo YG (2022) A universal strategy toward air-stable and high-rate O3 layered oxide cathodes for Na-Ion batteries. Adv Funct Mater 32:2111466. https://doi.org/10.1002/adfm.202111466 Yao HR, Wang PF, Gong Y, Zhang J, Yu X, Gu L, OuYang C, Yin YX, Hu E, Yang XQ, Stavitski E, Guo YG, Wan LJ (2017) Designing air-stable O3-type cathode materials by combined structure modulation for Na-Ion Batteries. J Am Chem Soc 139:8440–8443. https://doi.org/10.1021/jacs.7b05176 Yu TY, Ryu HH, Han G, Sun YK (2020) Understanding the capacity fading mechanisms of O3‐Type Na[Ni0.5Mn0.5]O2 cathode for sodium‐Ion batteries, Adv. Energy Mater 10;2001609. https://doi.org/10.1002/aenm.202001609. Huang Z-X, Gu Z-Y, Heng Y-L, Huixiang Ang E, Geng H-B, Wu X-L (2023) Advanced layered oxide cathodes for sodium/potassium-ion batteries: development, challenges and prospects, Chem Eng J 452;139438. https://doi.org/10.1016/j.cej.2022.139438. Kim H, Shakoor RA, Park C, Lim SY, Kim J-S, Jo YN, Cho W, Miyasaka K, Kahraman R, Jung Y, Choi JW (2013) Na2FeP2O7 as a promising iron-based pyrophosphate cathode for sodium rechargeable batteries: a combined experimental and theoretical study. Adv Funct Mater 23:1147–1155. https://doi.org/10.1002/adfm.201201589 Ren L, Song L, Guo Y, Wu Y, Lian J, Zhou Y-N, Yuan W, Yan Q, Wang Q, Ma S, Ye X, Ye Z, Lu J (2021) Magnesium-doped Na2FeP2O7 cathode materials for sodium-ion battery with enhanced cycling stability and rate capability, Appl Surf Sci 544;148893. https://doi.org/10.1016/j.apsusc.2020.148893. Chen M, Chen L, Hu Z, Liu Q, Zhang B, Hu Y, Gu Q, Wang JL, Wang LZ, Guo X, Chou SL, Dou SX (2017) Carbon-coated Na3.32Fe2.34(P2O7)2 cathode material for high-rate and long-life sodium-ion batteries, Adv Mater. 29;1605538. https://doi.org/10.1002/adma.201605535. Yuan TC, Wang YX, Zhang JX, Pu XJ, Ai XP, Chen ZX, Yang HX, Cao YL (2019) 3D graphene decorated Na4Fe3(PO4)2(P2O7) microspheres as low-cost and high-performance cathode materials for sodium-ion batteries. Nano Energy 56:160–168. https://doi.org/10.1016/j.nanoen.2018.11.011 Qian JF, Wu C, Cao YL, Ma ZF, Huang YH, Ai XP, Yang HX (2018) Prussian blue cathode materials for sodium-ion batteries and other ion batteries. Adv Energy Mater 8:1702619. https://doi.org/10.1002/aenm.201702619 Wang W, Gang Y, Hu Z, Yan Z, Li W, Li Y, Gu QF, Wang Z, Chou SL, Liu HK, Dou SX (2020) Reversible structural evolution of sodium-rich rhombohedral prussian blue for sodium-ion batteries. Nat Commun 11:980. https://doi.org/10.1038/s41467-020-14444-4 Yang DZ, Liao XZ, Huang BW, Shen J, He YS, Ma ZF (2013) A Na4Fe(CN)6/NaCl solid solution cathode material with an enhanced electrochemical performance for sodium ion batteries. J Mater Chem A 1:13417–13421. https://doi.org/10.1039/c3ta12994b Wang P-F, You Y, Yin Y-X, Guo Y-G (2018) Layered oxide cathodes for sodium-ion batteries: phase transition, air stability, and performance. Adv Energy Mater 8:1701912. https://doi.org/10.1002/aenm.201701912 Wang S, Sun C, Wang N, Zhang Q (2019) Ni- and/or Mn-based layered transition metal oxides as cathode materials for sodium ion batteries: status, challenges and countermeasures. J Mater Chem A 7:10138–10158. https://doi.org/10.1039/c8ta12441h Deng J, Luo W-B, Chou S-L, Liu H-K, Dou S-X (2018) Sodium-Ion batteries: from academic research to practical commercialization. Adv Energy Mater 8:1701428. https://doi.org/10.1002/aenm.201701428 Wei F, Zhang Q, Zhang P, Tian W, Dai K, Zhang L, Mao J, Shao G (2021) Review—research progress on layered transition metal oxide cathode materials for sodium Ion batteries, J. Electrochem Soc 168;050524. https://doi.org/10.1149/1945-7111/abf9bf. Zhao CL, Lu YX, Chen LQ, Hu YS (2019) Ni-based cathode materials for Na-ion batteries. Nano Res 12:2018–2030. https://doi.org/10.1007/s12274-019-2451-3 Rong X, LU Y, Qi X, Zhou Q, Kong W, Tang K, Chen L, Hu Y (2020) Na-ion batteries: from fundamental research to engineering exploration, Energy Storage Science and Technology 9;516–521. https://doi.org/10.19799/j.cnki.2095-4239.2020.0054. Wang H, Liao XZ, Yang Y, Yan XM, He YS, Ma ZF (2016) Large-scale synthesis of NaNi1/3Fe1/3Mn1/3O2 as high performance cathode materials for sodium ion batteries. J Electrochem Soc 163:A565–A570. https://doi.org/10.1149/2.0011605jes Che H, Yang X, Wang H, Liao X-Z, Zhang SS, Wang C, Ma Z-F (2018) Long cycle life of sodium-ion pouch cell achieved by using multiple electrolyte additives. J Power Sources 407:173–179. https://doi.org/10.1016/j.jpowsour.2018.08.025 Cao X, Zhou HS (2021) An indicator of designing layered sodium-ion oxide materials. Sci Bull 66:753–754. https://doi.org/10.1016/j.scib.2020.12.012 Wang Q, Chu S, Guo S (2020) Progress on multiphase layered transition metal oxide cathodes of sodium ion batteries. Chin Chem Lett 31:2167–2176. https://doi.org/10.1016/j.cclet.2019.12.008 S. Komaba, N. Yabuuchi, T. Nakayama, A. Ogata, T. Ishikawa, I. Nakai, Study on the reversible electrode reaction of Na1-xNi0.5Mn0.5O2 for a rechargeable sodium-ion battery, Inorg. Chem. 51 (2012) 6211–6220. https://doi.org/10.1021/ic300357d. S. Komaba, T. Nakayama, A. Ogata, T. Shimizu, C. Takei, S. Takada, A. Hokura, I. Nakai, Electrochemically reversible sodium intercalation of layered NaNi0.5Mn0.5O2 and NaCrO2, ECS Transactions 16 (2009) 43–45. https://doi.org/10.1149/1.3112727. Gao Y, Wang Z, Lu G (2019) Atomistic understanding of structural evolution, ion transport and oxygen stability in layered NaFeO2. J Mater Chem A 7:2619–2625. https://doi.org/10.1039/c8ta10767j Shigeto O, Yusuke T, Toshiyasu K, Takayuki D, Jun-ichi Y, Tetsuaki N (2006) Layered transition metal oxides as cathodes for sodium secondary battery, ECS Meeting Abstracts 02:201. https://doi.org/10.1149/MA2006-02/4/201 Mendiboure A, Delmas C, Hagenmuller P (1985) Electrochemical intercalation and deintercalation of NaxMnO2 bronzes. J Solid State Chem 57:323–331 Yu Y, Kong WJ, Li QY, Ning D, Schuck G, Schumacher G, Su CJ, Liu XF (2020) Understanding the multiple effects of TiO2 coating on NaMn0.33Fe0.33Ni0.33O2 cathode material for Na-Ion batteries, ACS Appl. Energy Mater. 3:933–942. https://doi.org/10.1021/acsaem.9b02021. Yabuuchi N, Kajiyama M, Iwatate J, Nishikawa H, Hitomi S, Okuyama R, Usui R, Yamada Y, Komaba S (2012) P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries. Nat Mater 11:512–517. https://doi.org/10.1038/nmat3309 Wang JE, Han WH, Chang KJ, Jung YH, Kim DK (2018) New insight into Na intercalation with Li substitution on alkali site and high performance of O3-type layered cathode material for sodium ion batteries. J Mater Chem A 6:22731–22740. https://doi.org/10.1039/c8ta06159a Birgisson S, Christiansen TL, Iversen BB (2018) Exploration of phase compositions, crystal structures, and electrochemical properties of NaxFeyMn1–yO2 sodium ion battery materials. Chem Mater 30:6636–6645. https://doi.org/10.1021/acs.chemmater.8b01566 Qi X, Liu L, Song N, Gao F, Yang K, Lu Y, Yang H, Hu YS, Cheng ZH, Chen L (2017) Design and comparative study of O3/P2 hybrid structures for room temperature sodium-ion batteries. ACS Appl Mater Interfaces 9:40215–40223. https://doi.org/10.1021/acsami.7b11282 F.X. Ding, C.L. Zhao, D. Zhou, Q.S. Meng, D.D. Xiao, Q.Q. Zhang, Y.S. Niu, Y.Q. Li, X.H. Rong, Y.X. Lu, L.Q. Chen, Y.S. Hu, A novel Ni-rich O3-Na[Ni0.60Fe0.25Mn0.15]O2 cathode for Na-ion batteries, Energy Storage Mater 30 (2020) 420–430. https://doi.org/10.1016/j.ensm.2020.05.013. S.M. Oh, S.T. Myung, C.S. Yoon, J. Lu, J. Hassoun, B. Scrosati, K. Amine, Y.K. Sun, Advanced Na[Ni0.25Fe0.5Mn0.25]O2/C-Fe3O4 sodium-ion batteries using EMS electrolyte for energy storage, Nano Lett. 14 (2014) 1620–1626. https://doi.org/10.1021/nl500077v. Lamb J, Manthiram A (2020) Synthesis control of layered oxide cathodes for sodium-ion batteries: a necessary step toward practicality. Chem Mater 32:8431–8441. https://doi.org/10.1021/acs.chemmater.0c02435 S. Zhao, Q. Shi, R. Qi, X. Zou, NaTi2(PO4)3 modified O3-type NaNi1/3Fe1/3Mn1/3O2 as high rate and air stable cathode for sodium-ion batteries, Electrochim. Acta 441 (2023) 141859. https://doi.org/10.1016/j.electacta.2023.141859. H.H. Sun, J.Y. Hwang, C.S. Yoon, A. Heller, C.B. Mullins, Capacity degradation mechanism and cycling stability enhancement of AlF3-coated nanorod gradient Na[Ni0.65Co0.08Mn0.27]O2 cathode for sodium-ion batteries, ACS Nano 12 (2018) 12912–12922. https://doi.org/10.1021/acsnano.8b08266. Yabuuchi N, Kubota K, Dahbi M, Komaba S (2014) Research development on sodium-ion batteries. Chem Rev 114:11636–11682. https://doi.org/10.1021/cr500192f Recent advances in titanium-based electrode materials for stationary sodium-ion batteries, Energy Environ. Sci 9 (2016) 2978–3006. https://doi.org/10.1039/c6ee01807f. Yabuuchi N, Yoshida H, Komaba S (2012) Crystal structures and electrode performance of Alpha-NaFeO2 for rechargeable sodium batteries. Electrochemistry 80:716–719. https://doi.org/10.5796/electrochemistry.80.716 Xu J, Han Z, Jiang K, Bai P, Liang Y, Zhang X, Wang P, Guo S, Zhou H (2020) Suppressing cation migration and reducing particle cracks in a layered Fe-based cathode for advanced sodium-Ion batteries. Small 16:1904388. https://doi.org/10.1002/smll.201904388 Zhuang Y, Zhao J, Zhao Y, Zhu X, Xia H (2021) Carbon-coated single crystal O3-NaFeO2 nanoflakes prepared via topochemical reaction for sodium-ion batteries. Sustain Mater Technol 28:00258. https://doi.org/10.1016/j.susmat.2021.e00258 Ma X, Chen H, Ceder G (2011) Electrochemical Properties of Monoclinic NaMnO2. J Electrochem Soc 158:A1307–A1312. https://doi.org/10.1149/2.035112jes Ma Z, Zhao Z, Xu H, Sun J, He X, Lei Z, Liu ZH, Jiang R, Li Q (2021) A queue-ordered layered Mn-based oxides with Al substitution as high-rate and high-stabilized cathode for sodium-Ion batteries. Small 17:2006259. https://doi.org/10.1002/smll.202006259 Zhang X, Qiao Y, Guo S, Jiang K, Xu S, Xu H, Wang P, He P, Zhou H (2019) Manganese-based Na-Rich materials boost anionic redox in high-performance layered cathodes for sodium-ion batteries. Adv Mater 31:1807770. https://doi.org/10.1002/adma.201807770 Deng JQ, Luo WB, Lu X, Yao QR, Wang ZM, Liu HK, Zhou HY, Dou SX (2018) High energy density sodium-ion battery with industrially feasible and air-stable O3-type layered oxide cathode. Adv Energy Mater 8:1701610. https://doi.org/10.1002/aenm.201701610 Vassilaras P, Ma X, Li X, Ceder G (2012) Electrochemical Properties of Monoclinic NaNiO2. J Electrochem Soc 160:A207–A211. https://doi.org/10.1149/2.023302jes L. Yu, X.-X. Xing, S.-Y. Zhang, X. Zhang, X. Han, P.-F. Wang, S. Xu, Cation-disordered O3-Na0.8Ni0.6Sb0.4O2 cathode for high-voltage sodium-ion batteries, ACS Applied Materials & Interfaces 13 (2021) 32948–32956. https://doi.org/10.1021/acsami.1c06576. P.F. Wang, H. Xin, T.T. Zuo, Q. Li, X. Yang, Y.X. Yin, X. Gao, X. Yu, Y.G. Guo, An abnormal 3.7 Volt O3-type sodium-ion battery cathode, Angew. Chem. Int. Ed. Engl. 57 (2018) 8178–8183. https://doi.org/10.1002/anie.201804130. H. Yu, S. Guo, Y. Zhu, M. Ishida, H. Zhou, Novel titanium-based O3-type NaTi0.5Ni0.5O2 as a cathode material for sodium ion batteries, Chem. Commun. 50 (2014) 457–459. https://doi.org/10.1039/c3cc47351a. Guo S, Sun Y, Liu P, Yi J, He P, Zhang X, Zhu Y, Senga R, Suenaga K, Chen M, Zhou H (2018) Cation-mixing stabilized layered oxide cathodes for sodium-ion batteries. Sci Bull 63:376–384. https://doi.org/10.1016/j.scib.2018.02.012 Jiang KZ, Guo SH, Pang WK, Zhang XP, Fang TC, Wang SF, Wang FW, Zhang XY, He P, Zhou HS (2021) Oxygen vacancy promising highly reversible phase transition in layered cathodes for sodium-ion batteries. Nano Res 14:4100–4106. https://doi.org/10.1007/s12274-021-3349-4 Li Q, Xu S, Guo S, Jiang K, Li X, Jia M, Wang P, Zhou H (2020) A superlattice-stabilized layered oxide cathode for sodium-ion batteries. Adv Mater 32:1907936. https://doi.org/10.1002/adma.201907936 Yuan D, Liang X, Wu L, Cao Y, Ai X, Feng J, Yang H (2014) A honeycomb-layered Na3Ni2SbO6: a high-rate and cycle-stable cathode for sodium-ion batteries. Adv Mater 26:6301–6306. https://doi.org/10.1002/adma.201401946 P.F. Wang, H.R. Yao, X.Y. Liu, J.N. Zhang, L. Gu, X.Q. Yu, Y.X. Yin, Y.G. Guo, Ti-substituted NaNi0.5Mn0.5-xTixO2 cathodes with reversible O3-P3 phase transition for high-performance sodium-ion batteries, Adv. Mater. 29 (2017) 1700210. https://doi.org/10.1002/adma.201700210. X. Meng, D. Zhang, Z. Zhao, Y. Li, S. Xu, L. Chen, X. Wang, S. Liu, Y. Wu, O3-NaNi0.47Zn0.03Mn0.5O2 cathode material for durable Na-ion batteries, J. Alloys Compd. 887 (2021) 161366. https://doi.org/10.1016/j.jallcom.2021.161366. Sathiya M, Jacquet Q, Doublet M-L, Karakulina OM, Hadermann J, Tarascon J-M (2018) A chemical approach to raise cell voltage and suppress phase transition in O3 sodium layered oxide electrodes. Adv Energy Mater 8:1702599. https://doi.org/10.1002/aenm.201702599 J.Y. Hwang, T.Y. Yu, Y.K. Sun, Simultaneous MgO coating and Mg doping of Na[Ni0.5Mn0.5]O2 cathode: facile and customizable approach to high-voltage sodium-ion batteries, J. Mater. Chem. A 6 (2018) 16854–16862. https://doi.org/10.1039/c8ta06551a. D.D. Yuan, Y.X. Wang, Y.L. Cao, X.P. Ai, H.X. Yang, Improved electrochemical performance of Fe-substituted NaNi0.5Mn0.5O2 cathode materials for sodium-ion batteries, ACS Appl. Mater. Interfaces 7 (2015) 8585–8591. https://doi.org/10.1021/acsami.5b00594. Yao HR, Lv WJ, Yin YX, Ye H, Wu XW, Wang Y, Gong Y, Li Q, Yu X, Gu L, Huang Z, Guo YG (2019) Suppression of monoclinic phase transitions of O3-Type cathodes based on electronic delocalization for Na-Ion batteries. ACS Appl Mater Interfaces 11:22067–22073. https://doi.org/10.1021/acsami.9b00186 X. Sun, Y. Jin, C.Y. Zhang, J.W. Wen, Y. Shao, Y. Zang, C.H. Chen, Na[Ni0.4Fe0.2Mn0.4−xTix]O2: a cathode of high capacity and superior cyclability for Na-ion batteries, J. Mater. Chem. A 2 (2014) 17268–17271. https://doi.org/10.1039/c4ta03828b. You Y, Xin S, Asl HY, Li W, Wang P-F, Guo Y-G, Manthiram A (2018) Insights into the improved high-voltage performance of Li-incorporated layered oxide cathodes for sodium-Ion batteries. Chem 4:2124–2139. https://doi.org/10.1016/j.chempr.2018.05.018 Zhang Q, Huang YY, Liu Y, Sun SX, Wang K, Li YY, Li X, Han JT, Huang YH (2017) F-doped O3-NaNi1/3Fe1/3Mn1/3O2 as high-performance cathode materials for sodium-ion batteries. Sci China Mater 60:629–636. https://doi.org/10.1007/s40843-017-9045-9 Ding F, Zhao C, Xiao D, Rong X, Wang H, Li Y, Yang Y, Lu Y, Hu YS (2022) Using high-entropy configuration strategy to design Na-Ion layered oxide cathodes with superior electrochemical performance and thermal stability. J Am Chem Soc 144:8286–8295. https://doi.org/10.1021/jacs.2c02353 H. Guo, M. Avdeev, K. Sun, X. Ma, H. Wang, Y. Hu, D. Chen, Pentanary transition-metals Na-ion layered oxide cathode with highly reversible O3-P3 phase transition, Chem. Eng. J. 412 (2021) 128704. https://doi.org/10.1016/j.cej.2021.128704. Li N, Ren J, Dang RB, Wu K, Lee YL, Hu ZB, Xiao XL (2019) Suppressing phase transition and improving electrochemical performances of O3-NaNi1/3Mn1/3Fe1/3O2 through ionic conductive Na2SiO3 coating. J Power Sources 429:38–45. https://doi.org/10.1016/j.jpowsour.2019.04.052 Yu Y, Ning D, Li QY, Franz A, Zheng LR, Zhang N, Ren GX, Schumacher G, Liu XF (2021) Revealing the anionic redox chemistry in O3-type layered oxide cathode for sodium-ion batteries. Energy Storage Mater 38:130–140. https://doi.org/10.1016/j.ensm.2021.03.004 Liang X, Sun YK (2022) A novel pentanary metal oxide cathode with P2/O3 biphasic structure for high-performance sodium-Ion batteries. Adv Funct Mater 32:2206154. https://doi.org/10.1002/adfm.202206154 Li Y, Gao Y, Wang X, Shen X, Kong Q, Yu R, Lu G, Wang Z, Chen L (2018) Iron migration and oxygen oxidation during sodium extraction from NaFeO2. Nano Energy 47:519–526. https://doi.org/10.1016/j.nanoen.2018.03.007 Susanto D, Cho MK, Ali G, Kim J-Y, Chang HJ, Kim H-S, Nam K-W, Chung KY (2019) Anionic redox activity as a key factor in the performance degradation of NaFeO2 cathodes for sodium ion batteries. Chem Mater 31:3644–3651. https://doi.org/10.1021/acs.chemmater.9b00149 Lee E, Brown DE, Alp EE, Ren Y, Lu J, Woo J-J, Johnson CS (2015) New insights into the performance degradation of Fe-based layered oxides in sodium-ion batteries: instability of Fe3+/Fe4+ redox in α-NaFeO2. Chem Mater 27:6755–6764. https://doi.org/10.1021/acs.chemmater.5b02918 Takeda Y, Akagi J, Edagawa A, Inagaki M, Naka S (1980) A preparation and polymorphic relations of sodium iron oxide (NaFeO2). Mat Res Bull 15:1167–1172 Kataoka R, Kuratani K, Kitta M, Takeichi N, Kiyobayashi T, Tabuchi M (2015) Influence of the preparation methods on the electrochemical properties and structural changes of alpha-sodium iron oxide as a positive electrode material for rechargeable sodium batteries. Electrochim Acta 182:871–877. https://doi.org/10.1016/j.electacta.2015.09.092 Tabuchi M, Kataoka R (2019) Structure and electrochemical properties of α-NaFeO2 obtained under various hydrothermal conditions. J Electrochem Soc 166:A2209–A2214. https://doi.org/10.1149/2.1411910jes Zhao J, Zhao L, Dimov N, Okada S, Nishida T (2013) Electrochemical and thermal properties of α-NaFeO2 cathode for Na-Ion batteries. J Electrochem Soc 160:A3077–A3081. https://doi.org/10.1149/2.007305jes Yan P, Zheng J, Chen T, Luo L, Jiang Y, Wang K, Sui M, Zhang JG, Zhang S, Wang C (2018) Coupling of electrochemically triggered thermal and mechanical effects to aggravate failure in a layered cathode. Nat Commun 9:2437. https://doi.org/10.1038/s41467-018-04862-w J. Jayachitra, A. Balamurugan, J. Richards Joshua, V. Sharmila, N. Sivakumar, T. Alshahrani, M. Shkir, Enhancing the electrochemical performance by structural evolution in O3- NaFe1-xMgxO2 cathodes for sodium ion batteries, Inorg. Chem. Commun. 129 (2021) 108528. https://doi.org/10.1016/j.inoche.2021.108528. Liu L, Li X, Bo S-H, Wang Y, Chen H, Twu N, Wu D, Ceder G (2015) High-performance P2-Type Na2/3(Mn1/2Fe1/4Co1/4)O2 cathode material with superior rate capability for Na-Ion batteries. Adv Energy Mater 5:1500944. https://doi.org/10.1002/aenm.201500944 H.-R. Yao, W.-J. Lv, X.-G. Yuan, Y.-J. Guo, L. Zheng, X.-A. Yang, J. Li, Y. Huang, Z. Huang, P.-F. Wang, Y.-G. Guo, New insights to build Na+/vacancy disordering for high-performance P2-type layered oxide cathodes, Nano Energy 97 (2022) 107207. https://doi.org/10.1016/j.nanoen.2022.107207. Wang X, Liu G, Iwao T, Okubo M, Yamada A (2014) Role of ligand-to-metal charge transfer in O3-Type NaFeO2–NaNiO2 solid solution for enhanced electrochemical properties. J PHYS CHEM C 118:2970–2976. https://doi.org/10.1021/jp411382r I. Moeez, D. Susanto, G. Ali, H.-G. Jung, H.-D. Lim, K.Y. Chung, Effect of the interfacial protective layer on the NaFe0.5Ni0.5O2 cathode for rechargeable sodium-ion batteries, J. Mater. Chem. A 8 (2020) 13964–13970. https://doi.org/10.1039/d0ta02837a. J.S. Thorne, S. Chowdhury, R.A. Dunlap, M.N. Obrovac, Structure and electrochemistry of NaxFexTi1-xO2(1.0 ≥ x ≥ 0.75) for Na-Ion battery positive electrodes, J. Electrochem. Soc. 161 (2014) A1801-A1805. https://doi.org/10.1149/2.0291412jes. J. Molenda, A. Plewa, A. Kulka, Ł. Kondracki, K. Walczak, A. Milewska, M. Rybski, L. Lu, J. Tobola, The effect of O3–P3–P′3 phases coexistence in NaxFe0.3Co0.7O2 cathode material on its electronic and electrochemical properties. Experimental and theoretical studies, J. Power Sources 449 (2020) 227471. https://doi.org/10.1016/j.jpowsour.2019.227471. H. Yoshida, N. Yabuuchi, S. Komaba, NaFe0.5Co0.5O2 as high energy and power positive electrode for Na-ion batteries, Electrochem. Commun. 34 (2013) 60–63. https://doi.org/10.1016/j.elecom.2013.05.012. Parant J-P, Olzacuaga R, Devalette M (1971) Sur quelques nouvelles phases de formule NaxMnO2 (x ⩽ 1). J Solid State Chem 3:1–11 Chen M, Liu Q, Wang SW, Wang E, Guo X, Chou SL (2019) High-abundance and low-cost metal-based cathode materials for sodium-ion batteries: problems, progress, and key technologies. Adv Energy Mater 9:1803609. https://doi.org/10.1002/aenm.201803609 Abakumov AM, Tsirlin AA, Bakaimi I, Van Tendeloo G, Lappas A (2014) Multiple twinning as a structure directing mechanism in layered rock-salt-type oxides: NaMnO2 polymorphism, redox potentials, and magnetism. Chem Mater 26:3306–3315. https://doi.org/10.1021/cm5011696 Billaud J, Clement RJ, Armstrong AR, Canales-Vazquez J, Rozier P, Grey CP, Bruce PG (2014) β-NaMnO2: a high-performance cathode for sodium-ion batteries. J Am Chem Soc 136:17243–17248. https://doi.org/10.1021/ja509704t Clément RJ, Middlemiss DS, Seymour ID, Ilott AJ, Grey CP (2016) Insights into the nature and evolution upon electrochemical cycling of planar defects in the β-NaMnO2 Na-Ion battery cathode: an NMR and first-principles density functional theory spproach. Chem Mater 28:8228–8239. https://doi.org/10.1021/acs.chemmater.6b03074 Velikokhatnyi OI, Chang CC, Kumta PN (2003) Phase stability and electronic structure of NaMnO2. J Electrochem Soc 150:A1262–A1266. https://doi.org/10.1149/1.1600464 Kumakura S, Tahara Y, Kubota K, Chihara K, Komaba S (2016) Sodium and manganese stoichiometry of P2-Type Na2/3MnO2. Angew Chem Int Ed Engl 55:12760–12763. https://doi.org/10.1002/anie.201606415 J. Lamb, A. Manthiram, Surface-modified Na(Ni0.3Fe0.4Mn0.3)O2 cathodes with enhanced cycle life and air stability for sodium-ion batteries, ACS Appl. Energy Mater. 4 (2021) 11735–11742. https://doi.org/10.1021/acsaem.1c02485. Kim D, Cho M, Cho K (2017) Rational design of Na(Li1/3Mn2/3)O2 operated by anionic redox reactions for advanced sodium-Ion batteries. Adv Mater 29:1701788. https://doi.org/10.1002/adma.201701788 Y. Zhang, J. Wang, L. Wang, L. Duan, G. Zhang, F. Zhao, X. Zhang, W. Lü, The multi-metal synergetic mechanism of O3-Na0.5Mn0.65Ni0.15Al0.1Mg0.05Co0.05O2 nanoflower for a high-voltage and long-cycle-life cathode material of sodium-ion batteries, Journal of Materials Science 55 (2020) 13102–13113. https://doi.org/10.1007/s10853-020-04940-9. Braconnier JJ, Delmas C, Hagenmuller P (1982) Etude par Desintercalation electrochimique des systemes NaxCrO2 et NaxNiO2[J]. Mater Res Bull 17:993–1000. https://doi.org/10.1016/0025-5408(82)90124-6 Delmas C, Borthomieu Y, Faure C, et al (1989) Nickel hydroxide and derived phases obtained by chimie douce from NaNiO2. Solid State Ionics 32-33:104–111. https://doi.org/10.1016/0167-2738(88)90073-2 Molenda J, StokŁlosa A (1990) Electronic and electrochemical properties of nickel bronze, NaxNiO2. Solid State Ionics 38(1–2):1–4. https://doi.org/10.1016/0167-2738(90)90438-W Han MH, Gonzalo E, Casas-Cabanas M, Rojo T (2014) Structural evolution and electrochemistry of monoclinic NaNiO2 upon the first cycling process. J Power Sources 258:266–271. https://doi.org/10.1016/j.jpowsour.2014.02.048 Wang L, Wang J, Zhang X, Ren Y, Zuo P, Yin G, Wang J (2017) Unravelling the origin of irreversible capacity loss in NaNiO2 for high voltage sodium ion batteries. Nano Energy 34:215–223. https://doi.org/10.1016/j.nanoen.2017.02.046 J. Han, Y. Niu, Y. Zhang, J. Jiang, S.-j. Bao, M. Xu, Evaluation of O3-type Na0.8Ni0.6Sb0.4O2 as cathode materials for sodium-ion batteries, J. Solid State Electrochem. 20 (2016) 2331–2335. https://doi.org/10.1007/s10008-016-3255-y. C. Delmas, I. Saadoune, P. Dordor, Effect of cobalt substitution on the Jahn-Teller distortion of the NaNiO2 layered oxide, Molecular Crystals and Liquid Crystals Science and Technology. Section A. Molecular Crystals and Liquid Crystals 244 (1994) 337–342. https://doi.org/10.1080/10587259408050127. Saadoune I, Maazaz A, Ménétrier M, Delmas C (1996) On the NaxNi0.6Co0.4O2 System: Physical and Electrochemical Studies. J Solid State Chem 122;111-117. https://doi.org/10.1006/jssc.1996.0090 Vassilaras P, Kwon D-H, Dacek ST, Shi T, Seo D-H, Ceder G, Kim JC (2017) Electrochemical properties and structural evolution of O3-type layered sodium mixed transition metal oxides with trivalent nickel. J Mater Chem A 5:4596–4606. https://doi.org/10.1039/c6ta09220a X. Rong, X. Qi, Y. Lu, Y. Wang, Y. Li, L. Jiang, K. Yang, F. Gao, X. Huang, L. Chen, Y.-S. Hu, A new Tin-based O3-Na0.9[Ni0.45−x/2MnxSn0.55−x/2]O2 as sodium-ion battery cathode, J Energy Chem 31 (2019) 132–137. https://doi.org/10.1016/j.jechem.2018.05.019. S. Maletti, A. Sarapulova, A. Schokel, D. Mikhailova, Operando studies on the NaNi0.5Ti0.5O2 cathode for Na-Ion batteries: elucidating titanium as a structure stabilizer, ACS Appl. Mater. Interfaces 11 (2019) 33923–33930. https://doi.org/10.1021/acsami.9b10352. Seibel EM, Roudebush JH, Wu H, Huang Q, Ali MN, Ji H, Cava RJ (2013) Structure and magnetic properties of the alpha-NaFeO2-type honeycomb compound Na3Ni2BiO6. Inorg Chem 52:13605–13611. https://doi.org/10.1021/ic402131e Bhange DS, Ali G, Kim D-H, Anang DA, Shin TJ, Kim M-G, Kang Y-M, Chung KY, Nam K-W (2017) Honeycomb-layer structured Na3Ni2BiO6 as a high voltage and long life cathode material for sodium-ion batteries. J Mater Chem A 5:1300–1310. https://doi.org/10.1039/c6ta08661f Schmidt W, Berthelot R, Sleight AW, Subramanian MA (2013) Solid solution studies of layered honeycomb-ordered phases O3–Na3M2SbO6 (M=Cu, Mg, Ni, Zn). J Solid State Chem 201:178–185. https://doi.org/10.1016/j.jssc.2013.02.035 Wang PF, Weng M, Xiao Y, Hu Z, Li Q, Li M, Wang YD, Chen X, Yang X, Wen Y, Yin YX, Yu X, Xiao Y, Zheng J, Wan LJ, Pan F, Guo YG (2019) An ordered Ni6-ring superstructure enables a highly stable sodium oxide cathode. Adv Mater 31:1903483. https://doi.org/10.1002/adma.201903483 de la Llave E, Borgel V, Park KJ, Hwang JY, Sun YK, Hartmann P, Chesneau FF, Aurbach D (2016) Comparison between Na-Ion and Li-Ion cells: understanding the critical role of the cathodes stability and the anodes pretreatment on the cells behavior. ACS Appl Mater Interfaces 8:1867–1875. https://doi.org/10.1021/acsami.5b09835 Komaba S, Murata W, Ishikawa T, Yabuuchi N, Ozeki T, Nakayama T, Ogata A, Gotoh K, Fujiwara K (2011) Electrochemical Na insertion and solid electrolyte interphase for hard-carbon electrodes and application to Na-Ion batteries. Adv Funct Mater 21:3859–3867. https://doi.org/10.1002/adfm.201100854 Komaba S, Ishikawa T, Yabuuchi N, Murata W, Ito A, Ohsawa Y (2011) Fluorinated ethylene carbonate as electrolyte additive for rechargeable Na batteries. ACS Appl Mater Interfaces 3:4165–4168. https://doi.org/10.1021/am200973k Oh SM, Myung ST, Jang MW, Scrosati B, Hassoun J, Sun YK (2013) An advanced sodium-ion rechargeable battery based on a tin-carbon anode and a layered oxide framework cathode. Phys Chem Chem Phys 15:3827–3833. https://doi.org/10.1039/c3cp00070b Dahn ZLJR (2001) Intercalation of water in P2, T2 and O2 structure Az[CoxNi1/3-xMn2/3]O2. Chem Mater 13:1252–1257. https://doi.org/10.1021/cm000721x Air-stability of sodium-based layered-oxide cathode materials (2022) SCIENCE CHINA Chem 65:1076–1087. https://doi.org/10.1007/s11426-022-1257-8 Zhang Y, Zhang R, Huang Y (2019) Air-stable NaxTMO2 cathodes for sodium storage. Front Chem 7:335. https://doi.org/10.3389/fchem.2019.00335 You Y, Dolocan A, Li W, Manthiram A (2019) Understanding the air-exposure degradation chemistry at a nanoscale of layered oxide cathodes for sodium-Ion batteries. Nano Lett 19:182–188. https://doi.org/10.1021/acs.nanolett.8b03637 Zhao S, Shi Q, Feng W, Liu Y, Yang X, Zou X, Lu X, Zhao Y (2023) Suppression of multistep phase transitions of O3-type cathode for sodium-ion batteries. Chin Chem Lett. https://doi.org/10.1016/j.cclet.2023.108606 Kubota K, Fujitani N, Yoda Y, Kuroki K, Tokita Y, Komaba S (2021) Impact of Mg and Ti doping in O3 type NaNi1/2Mn1/2O2 on reversibility and phase transition during electrochemical Na intercalation. J Mater Chem A 9:12830–12844. https://doi.org/10.1039/d1ta01164b N.Y. Hong, K. Wu, Z.J. Peng, Z.H. Zhu, G.F. Jia, M. Wang, Improved high rate performance and cycle performance of Al-doped O3-type NaNi0.5Mn0.5O2 cathode materials for sodium-Ion batteries, J Phys Chem C 124 (2020) 22925–22933. https://doi.org/10.1021/acs.jpcc.0c06032. Q. Zhang, Q.F. Gu, Y. Li, H.N. Fan, W.B. Luo, H.K. Liu, S.X. Dou, Surface stabilization of O3-type layered oxide cathode to protect the anode of sodium ion batteries for superior lifespan, iScience 19 (2019) 244–254. https://doi.org/10.1016/j.isci.2019.07.029. Ahmed B, Xia C, Alshareef HN (2016) Electrode surface engineering by atomic layer deposition: A promising pathway toward better energy storage. Nano Today 11:250–271. https://doi.org/10.1016/j.nantod.2016.04.004 Yu F, Du L, Zhang G, Su F, Wang W, Sun S (2019) Electrode engineering by atomic layer deposition for sodium-ion batteries: from traditional to advanced batteries. Adv Funct Mater 30:1906890. https://doi.org/10.1002/adfm.201906890 Meng X, Wang X, Geng D, Ozgit-Akgun C, Schneider N, Elam JW (2017) Atomic layer deposition for nanomaterial synthesis and functionalization in energy technology. Mater Horiz 4:133–154. https://doi.org/10.1039/c6mh00521g L.Y. Yang, S.W. Sun, K. Du, H.L. Zhao, D. Yan, H.Y. Yang, C.Y. Yu, Y. Bai, Prompting structure stability of O3–NaNi0.5Mn0.5O2 via effective surface regulation based on atomic layer deposition, Ceram. Int. 47 (2021) 28521–28527. https://doi.org/10.1016/j.ceramint.2021.07.009. Y. Xiao, T. Wang, Y.F. Zhu, H.Y. Hu, S.J. Tan, S. Li, P.F. Wang, W. Zhang, Y.B. Niu, E.H. Wang, Y.J. Guo, X. Yang, L. Liu, Y.M. Liu, H. Li, X.D. Guo, Y.X. Yin, Y.G. Guo, Large-scale synthesis of the stable co-free layered oxide cathode by the synergetic contribution of multielement chemical substitution for practical sodium-Ion battery, Research (2020) 1469301. https://doi.org/10.34133/2020/1469301. Kubota K, Komaba S (2015) Review—practical issues and future perspective for Na-Ion batteries. J Electrochem Soc 162:A2538–A2550. https://doi.org/10.1149/2.0151514jes L. Zheng, L. Li, R. Shunmugasundaram, M.N. Obrovac, Effect of controlled-atmosphere storage and ethanol rinsing on NaNi0.5Mn0.5O2 for sodium-Ion batteries, ACS Appl. Mater. Interfaces 10 (2018) 38246–38254. https://doi.org/10.1021/acsami.8b14209. Hwang J-Y, Myung S-T, Aurbach D, Sun Y-K (2016) Effect of nickel and iron on structural and electrochemical properties of O3 type layer cathode materials for sodium-ion batteries. J Power Sources 324:106–112. https://doi.org/10.1016/j.jpowsour.2016.05.064 H. Zhao, J.Z. Li, W.P. Liu, H.Y. Xu, X.W. Gao, J.J. Shi, K. Yu, X.Y. Ding, Integrated titanium-substituted air stable O3 sodium layered oxide electrode via a complexant assisted route for high capacity sodium-ion battery, Electrochim. Acta 388 (2021) 138561. https://doi.org/10.1016/j.electacta.2021.138561. Hwang T, Lee JH, Choi SH, Oh RG, Kim D, Cho M, Cho W, Park MS (2019) Critical role of titanium in O3-type layered cathode materials for sodium-ion batteries. ACS Appl Mater Interfaces 11:30894–30901. https://doi.org/10.1021/acsami.9b08987 S.-M. Oh, S.-T. Myung, J.-Y. Hwang, B. Scrosati, K. Amine, Y.-K. Sun, High capacity O3-Type Na[Li0.05(Ni0.25Fe0.25Mn0.5)0.95]O2 cathode for sodium ion batteries, Chem. Mater. 26 (2014) 6165–6171. https://doi.org/10.1021/cm502481b. C. Zhang, R. Gao, L. Zheng, Y. Hao, X. Liu, New insights into the roles of Mg in improving the rate capability and cycling stability of O3-NaMn0.48Ni0.2Fe0.3Mg0.02O2 for sodium-ion batteries, ACS Appl. Mater. Interfaces 10 (2018) 10819–10827. https://doi.org/10.1021/acsami.7b18226. Sun L, Xie Y, Liao XZ, Wang H, Tan G, Chen Z, Ren Y, Gim J, Tang W, He YS, Amine K, Ma ZF (2018) Insight into Ca-substitution effects on O3-type NaNi1/3Fe1/3Mn1/3O2 cathode materials for sodium-ion batteries application. Small 14:1704523. https://doi.org/10.1002/smll.201704523 Ma A, Yin Z, Wang J, Wang Z, Guo H, Yan G (2020) Al-doped NaNi1/3Mn1/3Fe1/3O2 for high performance of sodium ion batteries. Lonics 26:1797–1804. https://doi.org/10.1007/s11581-019-03437-z Q. Mao, C. Zhang, W. Yang, J. Yang, L. Sun, Y. Hao, X. Liu, Mitigating the voltage fading and lattice cell variations of O3-NaNi0.2Fe0.35Mn0.45O2 for high performance Na-ion battery cathode by Zn doping, J. Alloys Compd. 794 (2019) 509–517. https://doi.org/10.1016/j.jallcom.2019.04.271. Sarkar A, Wang Q, Schiele A, Chellali MR, Bhattacharya SS, Wang D, Brezesinski T, Hahn H, Velasco L, Breitung B (2019) High-entropy oxides: fundamental aspects and electrochemical properties. Adv Mater 31:1806236. https://doi.org/10.1002/adma.201806236 H. Chen, S. Li, S. Huang, L. Ma, S. Liu, F. Tang, Y. Fang, P. Dai, High-entropy structure design in layered transition metal dichalcogenides, Acta Mater. 222 (2022) 117438. https://doi.org/10.1016/j.actamat.2021.117438. Fu F, Liu X, Fu X, Chen H, Huang L, Fan J, Le J, Wang Q, Yang W, Ren Y, Amine K, Sun SG, Xu GL (2022) Entropy and crystal-facet modulation of P2-type layered cathodes for long-lasting sodium-based batteries. Nat Commun 13:2826. https://doi.org/10.1038/s41467-022-30113-0 Lin C-C, Liu H-Y, Kang J-W, Yang C-C, Li C-H, Chen H-YT, Huang S-C, Ni C-S, Chuang Y-C, Chen B-H, Chang C-K, Chen H-Y (2022) In-situ X-ray studies of high-entropy layered oxide cathode for sodium-ion batteries. Energy Storage Mater 51:159–171. https://doi.org/10.1016/j.ensm.2022.06.035 Miracle DB, Senkov ON (2017) A critical review of high entropy alloys and related concepts. Acta Mater 122:448–511. https://doi.org/10.1016/j.actamat.2016.08.081 Ma Y, Ma Y, Wang Q, Schweidler S, Botros M, Fu T, Hahn H, Brezesinski T, Breitung B (2021) High-entropy energy materials: challenges and new opportunities. Energy Environ Sci 14:2883–2905. https://doi.org/10.1039/d1ee00505g Q. Deng, F.H. Zheng, W.T. Zhong, Q.Z. Pan, Y.Z. Liu, Y.P. Li, Y.J. Li, J.H. Hu, C.H. Yang, M.L. Liu, Nanoscale surface modification of P2-type Na0.65[Mn0.70Ni0.16Co0.14]O2 cathode material for high-performance sodium-ion batteries, Chem. Eng. J. 404 (2021) 126446. https://doi.org/10.1016/j.cej.2020.126446. J.R. Wang, Q. Zhou, J.Y. Liao, X. Ding, Q. Hu, X.D. He, C.H. Chen, Suppressing the unfavorable surface layer growth on Na0.44MnO2 cathode by a NaTi2(PO4)3 coating to improve cycling stability and ultrahigh rate capability, ACS Appl. Energy Mater. 2 (2019) 7497–7503. https://doi.org/10.1021/acsaem.9b01471. Hwang JY, Myung ST, Choi JU, Yoon CS, Yashiro H, Sun YK (2017) Resolving the degradation pathways of the O3-type layered oxide cathode surface through the nano-scale aluminum oxide coating for high-energy density sodium-ion batteries. J Mater Chem A 5:23671–23680. https://doi.org/10.1039/c7ta08443a Keller M, Buchholz D, Passerini S (2016) Layered Na-Ion cathodes with outstanding performance resulting from the synergetic effect of mixed P- and O-Type phases. Adv Energy Mater 6:1501555. https://doi.org/10.1002/aenm.201501555 Wang K, Wu Z-G, Melinte G, Yang Z-G, Sarkar A, Hua W, Mu X, Yin Z-W, Li J-T, Guo X-D, Zhong B-H, Kübel C (2021) Preparation of intergrown P/O-type biphasic layered oxides as high-performance cathodes for sodium ion batteries. J Mater Chem A 9:13151–13160. https://doi.org/10.1039/d1ta00627d