Research progress for plastic waste management and manufacture of value-added products
Tóm tắt
Từ khóa
Tài liệu tham khảo
Záleská M, Pavlikova M, Pokorný J, Jankovský O, Pavlík Z, Černý R (2018) Structural, mechanical and hydrothermal properties of lightweight concrete based on the application of waste plastics. Constr Build Mater 180:1–11
Chamas A, Moon H, Zheng J, Qiu Y, Tabassum T, Jang JH, Abu-Omar MM, Scott SL, Suh S (2020) Degradation rates of plastics in the environment. ACS Sustain Chem Eng 8(9):3494–3511
Zheng J, Suh S (2019) Strategies to reduce the global carbon footprint of plastics. Nat Clim Chang 9(5):374–378
Reddy MM, Vivekanandhan S, Misra M, Bhatia SK, Mohanty AK (2013) Biobased plastics and bionanocomposites: current status and future opportunities. Prog Polym Sci 38(10–11):1653–1689
Barnes DK, Morley SA, Bell J, Brewin P, Brigden K, Collins M, Glass T, Goodall-Copestake WP, Henry L, Laptikhovsky V (2018) Marine plastics threaten giant Atlantic marine protected areas. Curr Biol 28(19):R1137–R1138
Nielsen TD, Holmberg K, Stripple J (2019) Need a bag? A review of public policies on plastic carrier bags – where, how and to what effect? Waste Manag 87:428–440
Dhanumalayan E, Joshi GM (2018) Performance properties and applications of polytetrafluoroethylene (PTFE)-a review. Adv Compos Hybird Mater 1(2):247–268
Rahimi A, Garcia JM (2017) Chemical recycling of waste plastics for new materials production. Nat Rev Chem 1(6):0046
Trotta JT, Watts A, Wong AR, LaPointe AM, Hillmyer MA, Fors BP (2018) Renewable thermosets and thermoplastics from itaconic acid. ACS Sustain Chem Eng 7(2):2691–2701
Schimpf V, Ritter BS, Weis P, Parison K, Mülhaupt R (2017) High purity limonene dicarbonate as versatile building block for sustainable non-isocyanate polyhydroxyurethane thermosets and thermoplastics. Macromolecules 50(3):944–955
Xu P, Qu M, Ning Y, Jia T, Zhang Y, Wang S, Feng N, Wu L (2019) High performance and low floating fiber glass fiber-reinforced polypropylene composites realized by a facile coating method. Adv Compos Hybrid Mater 2:234–241
Huang J, Liu W, Qiu X (2019) High performance thermoplastic elastomers with biomass lignin as plastic phase. ACS Sustain Chem Eng 7(7):6550–6560
Dhanumalayan E, Joshi GM (2018) Performance properties and applications of polytetrafluoroethylene. Adv Compos Hybrid Mater 1:247–268
Koomson C, Zeltmann SE, Gupta N (2018) Strain rate sensitivity of polycarbonate and vinyl ester from dynamic mechanical analysis experiments. Adv Compos Hybrid Mater 1:341–346
Ning F, Cong W, Qiu J, Wei J, Wang S (2015) Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling. Compos Part B 80:369–378
Chen R, Li Q, Xu X, Zhang D (2019) Comparative pyrolysis characteristics of representative commercial thermosetting plastic waste in inert and oxygenous atmosphere. Fuel 246:212–221
Wuchinich D (2015) Acoustic properties of selected high strength thermosetting plastic composites at ultrasonic frequencies. Phys Procedia 63:208–216
Xu S, Lamm ME, Rahman MA, Zhang X, Zhu T, Zhao Z, Tang C (2018) Renewable atom-efficient polyesters and thermosetting resins derived from high oleic soybean oil. Green Chem 20(5):1106–1113
Jiang J, Liu X, Lian M, Pan Y, Chen Q, Liu H, Zheng G, Guo Z, Schubert DW, Shen C (2018) Self-reinforcing and toughening isotactic polypropylene via melt sequential injection molding. Polym Test 67:183–189
Peterson AM (2019) Review of acrylonitrile butadiene styrene in fused filament fabrication: a plastics engineering-focused perspective. Addit Manuf 27:363–371
Liu Y, Zhang X, Song C, Zhang Y, Fang Y, Yang B, Wang X (2015) An effective surface modification of carbon fiber for improving the interfacial adhesion of polypropylene composites. Mater Des 88:810–819
Han Y, Wang T, Gao X, Li T, Zhang Q (2016) Preparation of thermally reduced graphene oxide and the influence of its reduction temperature on the thermal, mechanical, flame retardant performances of PS nanocomposites. Compos Part A 84:336–343
Sengwa RJ, Choudhary S, Dhatarwal P (2019) Investigation of alumina nanofiller impact on the structural and dielectric properties of PEO/PMMA blend matrix-based polymer nanocomposites. Adv Compos Hybrid Mater 2:162–175
Wu J, Eduard P, Thiyagarajan S, Noordover BA, van Es DS, Koning CE (2015) Semi-aromatic polyesters based on a carbohydrate-derived rigid Diol for engineering plastics. ChemSusChem 8(1):67–72
Duereh A, Sato Y, Smith RL Jr, Inomata H (2015) Replacement of hazardous chemicals used in engineering plastics with safe and renewable hydrogen-bond donor and acceptor solvent-pair mixtures. ACS Sustain Chem Eng 3(8):1881–1889
Lai Y, Kuang X, Zhu P, Huang M, Dong X, Wang D (2018) Colorless, transparent, robust, and fast scratch-self-healing elastomers via a phase-locked dynamic bonds design. Adv Mater 30(38):1802556
Elsabbagh A, Steuernagel L, Ring J (2017) Natural fibre/PA6 composites with flame retardance properties: extrusion and characterisation. Compos Part B 108:325–333
Gong J, Liu J, Chen X, Jiang Z, Wen X, Mijowska E, Tang T (2015) Converting real-world mixed waste plastics into porous carbon nanosheets with excellent performance in the adsorption of an organic dye from wastewater. J Mater Chem A 3(1):341–351
Dorado C, Mullen CA, Boateng AA (2015) Origin of carbon in aromatic and olefin products derived from HZSM-5 catalyzed co-pyrolysis of cellulose and plastics via isotopic labeling. Appl Catal B 162:338–345
Huysveld S, Hubo S, Ragaert K, Dewulf J (2019) Advancing circular economy benefit indicators and application on open-loop recycling of mixed and contaminated plastic waste fractions. J Clean Prod 211:1–13
Barnes SJ (2019) Understanding plastics pollution: the role of economic development and technological research. Environ Pollut 249:812–821
Dilkes-Hoffman LS, Pratt S, Laycock B, Ashworth P, Lant PA (2019) Public attitudes towards plastics. Resour Conserv Recycl 147:227–235
Zhang H, Liu Y, Meng T, Ma L, Zhu J, Xu M, Li CM, Zhou W, Jiang J (2019) Mass production of metallic Fe@ carbon nanoparticles with plastic and rusty wastes for high-capacity anodes of Ni–Fe batteries. ACS Sustain Chem Eng 7(12):10995–11003
Turku I, Kärki T, Rinne K, Puurtinen A (2017) Characterization of plastic blends made from mixed plastics waste of different sources. Waste Manag Res 35(2):200–206
Pivnenko K, Eriksen MK, Martín-Fernández JA, Eriksson E, Astrup TF (2016) Recycling of plastic waste: presence of phthalates in plastics from households and industry. Waste Manag 54:44–52
Wu LH, Zhang XM, Wang F, Gao CJ, Chen D, Palumbo JR, Guo Y, Zeng EY (2018) Occurrence of bisphenol S in the environment and implications for human exposure: a short review. Sci Total Environ 615:87–98
Silvarrey LD, Phan A (2016) Kinetic study of municipal plastic waste. Int J Hydrog Energy 41(37):16352–16364
Barnes SJ (2019) Out of sight, out of mind: plastic waste exports, psychological distance and consumer plastic purchasing. Glob Environ Chang 58:101943
Turner A, Filella M (2017) Bromine in plastic consumer products–evidence for the widespread recycling of electronic waste. Sci Total Environ 601:374–379
Murava I, Korobeinykova Y (2016) The analysis of the waste problem in tourist destinations on the example of Carpathian region in Ukraine. J Ecol Eng 17(2):43–51
Wang W, Gao H, Jin S, Li R, Na G (2019) The ecotoxicological effects of microplastics on aquatic food web, from primary producer to human: a review. Ecotoxicol Environ Saf 173:110–117
Cox KD, Covernton GA, Davies HL, Dower JF, Juanes F, Dudas SE (2019) Human consumption of microplastics. Environ Sci Technol 53(12):7068–7074
Monteiro RC, do Sul JAI, Costa MF (2018) Plastic pollution in islands of the Atlantic Ocean. Environ Pollut 238:103–110
Brebu M (2020) Environmental degradation of plastic composites with natural fillers—a review. Polymers 12(1):166
Avery-Gomm S, Borrelle SB, Provencher JF (2018) Linking plastic ingestion research with marine wildlife conservation. Sci Total Environ 637:1492–1495
Leal Filho W, Havea PH, Balogun AL, Boenecke J, Maharaj AA, Ha'apio M, Hemstock SL (2019) Plastic debris on Pacific Islands: ecological and health implications. Sci Total Environ 670:181–187
Steensgaard IM, Syberg K, Rist S, Hartmann NB, Boldrin A, Hansen SF (2017) From macro-to microplastics-analysis of EU regulation along the life cycle of plastic bags. Environ Pollut 224:289–299
Jambeck JR, Geyer R, Wilcox C, Siegler TR, Perryman M, Andrady A, Narayan R, Law KL (2015) Plastic waste inputs from land into the ocean. Science 347(6223):768–771
Comăniță ED, Hlihor RM, Ghinea C, Gavrilescu M (2016) Occurrence of plastic waste in the environment: ecological and health risks. Environ Eng Manag J 15(3):675–685
Ghodrat M, Alonso JA, Hagare D, Yang R, Samali B (2019) Economic feasibility of energy recovery from waste plastic using pyrolysis technology: an Australian perspective. Int J Environ Sci Technol 16(7):3721–3734
Hatti-Kaul R, Nilsson LJ, Zhang B, Rehnberg N, Lundmark S (2019) Designing biobased recyclable polymers for plastics. Trends Biotechnol 38:50–67
Jiang Q, Mortazavi M, Wang J, Liu Y, Wang Z, Yu W, Guo Z, Cao B (2018) Introducing journal of ES Energy & Environment: better life, beautiful world and bright future. ES Energy Environ 1:1–3
Ohnishi S, Fujii M, Fujita T, Matsumoto T, Dong L, Akiyama H, Dong H (2016) Comparative analysis of recycling industry development in Japan following the eco-town program for eco-industrial development. J Clean Prod 114:95–102
Zhang L, Xu Z (2019) Towards minimization of secondary wastes: element recycling to achieve future complete resource recycling of electronic wastes. Waste Manag 96:175–180
Zhang K, Shi H, Peng J, Wang Y, Xiong X, Wu C, Lam PKS (2018) Microplastic pollution in China’s inland water systems: a review of findings, methods, characteristics, effects, and management. Sci Total Environ 630:1641–1653
Mourshed M, Masud MH, Rashid F, Joardder MUH (2017) Towards the effective plastic waste management in Bangladesh: a review. Environ Sci Pollut Res 24(35):27021–27046
Alsalem SM, Antelava A, Constantinou A, Manos G, Dutta A (2017) A review on thermal and catalytic pyrolysis of plastic solid waste (PSW). J Environ Manag 197:177–198
Yang X, Sun L, Xiang J, Hu S, Su S (2013) Pyrolysis and dehalogenation of plastics from waste electrical and electronic equipment (WEEE): a review. Waste Manag 33(2):462–473
Burange AS, Gawande MB, Lam FLY, Jayaram RV, Luque R (2015) Heterogeneously catalyzed strategies for the deconstruction of high density polyethylene: plastic waste valorisation to fuels. Green Chem 17(1):146–156
Arjanggi RD, Kansedo J (2019) Recent advancement and prospective of waste plastics as biodiesel additives: a review. J Energy Inst 93(3):934–952
Faraj RH, Ali HFH, Sherwani AFH, Hassan BR, Karim H (2020) Use of recycled plastic in self-compacting concrete: a comprehensive review on fresh and mechanical properties. J Build Eng 30:101283
Rajendran KM, Chintala V, Sharma AK, Pal S, Pandey JK, Ghodke P (2020) Review of catalyst materials in achieving the liquid hydrocarbon fuels from municipal mixed plastic waste (MMPW). Mater Today Commun 24:100982
Shen Y (2020) A review on hydrothermal carbonization of biomass and plastic wastes to energy products. Biomass Bioenergy 134:105479
Banu JR, Sharmila VG, Ushani U, Amudha V, Kumar G (2020) Impervious and influence in the liquid fuel production from municipal plastic waste through thermo-chemical biomass conversion technologies - a review. Sci Total Environ 718:137287
Siddique R, Khatib JM, Kaur I (2008) Use of recycled plastic in concrete: a review. Waste Manag 28(10):1835–1852
Kore SD (2019) Sustainable utilization of plastic waste in concrete mixes - a review. J Build Mater 5(2):212–217
Sharma R, Bansal PP (2016) Use of different forms of waste plastic in concrete – a review. J Clean Prod 112:473–482
Dahlbo H, Poliakova V, Mylläri V, Sahimaa O, Anderson R (2018) Recycling potential of post-consumer plastic packaging waste in Finland. Waste Manag 71:52–61
Janajreh I, Alshrah M, Zamzam S (2015) Mechanical recycling of PVC plastic waste streams from cable industry: a case study. Sustain Cities Soc 18:13–20
Ware RL, Rowland SM, Rodgers RP, Marshall AG (2017) Advanced chemical characterization of pyrolysis oils from landfill waste, recycled plastics, and forestry residue. Energy Fuel 31(8):8210–8216
Adam V, Nowack B (2017) European country-specific probabilistic assessment of nanomaterial flows towards landfilling, incineration and recycling. Environ Sci Nano 4(10):1961–1973
Su Y, Zhang Z, Wu D, Zhan L, Shi H, Xie B (2019) Occurrence of microplastics in landfill systems and their fate with landfill age. Water Res 164:114968
Uekert T, Kuehnel MF, Wakerley DW, Reisner E (2018) Plastic waste as a feedstock for solar-driven H 2 generation. Energy Environ Sci 11(10):2853–2857
Ni HG, Lu SY, Mo T, Zeng H (2016) Brominated flame retardant emissions from the open burning of five plastic wastes and implications for environmental exposure in China. Environ Pollut 214:70–76
Huang J, He C, Li X, Pan G, Tong H (2018) Theoretical studies on thermal degradation reaction mechanism of model compound of bisphenol a polycarbonate. Waste Manag 71:181–191
Tang Z, Huang Q, Yang Y, Nie Z, Cheng J, Yang J, Wang Y, Chai M (2016) Polybrominated diphenyl ethers (PBDEs) and heavy metals in road dusts from a plastic waste recycling area in North China: implications for human health. Environ Sci Pollut Res 23(1):625–637
Wucher B, Lani F, Pardoen T, Bailly C, Martiny P (2014) Tooling geometry optimization for compensation of cure-induced distortions of a curved carbon/epoxy C-spar. Compos Part A 56:27–35
Song SX, Hu J, Wu ZW (2011) The pulverization and its dynamic model of waste thermosetting phenol-formaldehyde resins. Appl Mech Mater 130-134:1470–1474
Correia JR, Almeida NM, Figueira JR (2011) Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures. J Clean Prod 19(15):1745–1753
Dhawan R, Bisht BMS, Kumar R, Kumari S, Dhawan SK (2019) Recycling of plastic waste into tiles with reduced flammability and improved tensile strength. Process Saf Environ Prot 124:299–307
Briassoulis D, Hiskakis M, Babou E (2013) Technical specifications for mechanical recycling of agricultural plastic waste. Waste Manag 33(6):1516–1530
Dikmans RE, Krouwel EM, Ghasemi M, van de Grift TC, Bouman MB, Ritt M, Elzevier HW, Mullender MG (2018) Discussing sexuality in the field of plastic and reconstructive surgery: a national survey of current practice in the Netherlands. Eur J Plast Surg 41(6):707–714
Aryan Y, Yadav P, Samadder SR (2019) Life cycle assessment of the existing and proposed plastic waste management options in India: a case study. J Clean Prod 211:1268–1283
Yuan J, Ma J, Sun Y, Zhou T, Zhao Y, Yu F (2020) Microbial degradation and other environmental aspects of microplastics/plastics. Sci Total Environ 715:136968
Fei F, Wen Z, Huang S, De Clercq D (2018) Mechanical biological treatment of municipal solid waste: energy efficiency, environmental impact and economic feasibility analysis. J Clean Prod 178:731–739
Bandopadhyay S, Martin-Closas L, Pelacho AM, DeBruyn JM (2018) Biodegradable plastic mulch films: impacts on soil microbial communities and ecosystem functions. Front Microbiol 9:819
Al Hosni AS, Pittman JK, Robson GD (2019) Microbial degradation of four biodegradable polymers in soil and compost demonstrating polycaprolactone as an ideal compostable plastic. Waste Manag 97:105–114
Jandas PJ, Mohanty S, Nayak SK (2018) Cold crystallization kinetics of biodegradable polymer blend; controlled by reactive interactable and nano nucleating agent. Adv Compos Hybrid Mater 1:624–634
Oberbeckmann S, Loeder MG, Gerdts G, Osborn AM (2014) Spatial and seasonal variation in diversity and structure of microbial biofilms on marine plastics in northern European waters. FEMS Microbiol Ecol 90(2):478–492
Yang Y, Yang J, Wu WM, Zhao J, Song Y, Gao L, Yang R, Jiang L (2015) Biodegradation and mineralization of polystyrene by plastic-eating mealworms: part 1. Chemical and physical characterization and isotopic tests. Environ Sci Technol 49(20):12080–12086
Yang Y, Yang J, Wu WM, Zhao J, Song Y, Gao L, Yang R, Jiang L (2015) Biodegradation and mineralization of polystyrene by plastic-eating mealworms: part 2. Role of gut microorganisms. Environ Sci Technol 49(20):12087–12093
Mostafa N, Farag AA, Abo-dief HM, Tayeb AM (2018) Production of biodegradable plastic from agricultural wastes. Arab J Chem 11(4):546–553
Narancic T, Verstichel S, Reddy Chaganti S, Morales-Gamez L, Kenny ST, De Wilde B, Babu Padamati R, O’Connor KE (2018) Biodegradable plastic blends create new possibilities for end-of-life management of plastics but they are not a panacea for plastic pollution. Environ Sci Technol 52(18):10441–10452
Kubowicz S, Booth AM (2017) Biodegradability of plastics: challenges and misconceptions. Environ Sci Technol 51(21):12058–12060
Lambert S, Wagner M (2017) Environmental performance of bio-based and biodegradable plastics: the road ahead. Chem Soc Rev 46(22):6855–6871
Haider TP, Völker C, Kramm J, Landfester K, Wurm FR (2019) Plastics of the future? The impact of biodegradable polymers on the environment and on society. Angew Chem Int Ed 58(1):50–62
Rahimi A, García JM (2017) Chemical recycling of waste plastics for new materials production. Nat Rev Chem 1(6):1–11
Hahladakis JN, Velis CA, Weber R, Iacovidou E, Purnell P (2018) An overview of chemical additives present in plastics: migration, release, fate and environmental impact during their use, disposal and recycling. J Hazard Mater 344:179–199
Gharde S, Kandasubramanian B (2019) Mechanothermal and chemical recycling methodologies for the fibre reinforced plastic (FRP). Environ Technol Innov 14:100311
Yan G, Jing X, Wen H, Xiang S (2015) Thermal cracking of virgin and waste plastics of PP and LDPE in a semibatch reactor under atmospheric pressure. Energy Fuel 29(4):2289–2298
Rodríguez E, Gutiérrez A, Palos R, Azkoiti MJ, Arandes JM, Bilbao J (2019) Cracking of scrap tires pyrolysis oil in a fluidized bed reactor under catalytic cracking unit conditions. Effects of operating conditions. Energy Fuel 33(4):3133–3143
Lopez-Urionabarrenechea A, de Marco I, Caballero B, Laresgoiti M, Adrados A (2015) Upgrading of chlorinated oils coming from pyrolysis of plastic waste. Fuel Process Technol 137:229–239
Miandad R, Barakat MA, Aburiazaiza AS, Rehan M, Nizami AS (2016) Catalytic pyrolysis of plastic waste: a review. Process Saf Environ Prot 102:822–838
Gear M, Sadhukhan J, Thorpe R, Clift R, Seville J, Keast M (2018) A life cycle assessment data analysis toolkit for the design of novel processes–a case study for a thermal cracking process for mixed plastic waste. J Clean Prod 180:735–747
Anene AF, Fredriksen SB, Sætre KA, Tokheim LA (2018) Experimental study of thermal and catalytic pyrolysis of plastic waste components. Sustainability 10(11):3979
Muhammad C, Onwudili JA, Williams PT (2015) Catalytic pyrolysis of waste plastic from electrical and electronic equipment. J Anal Appl Pyrolysis 113:332–339
López A, de Marco I, Caballero BM, Laresgoiti MF, Adrados A, Aranzabal A (2011) Catalytic pyrolysis of plastic wastes with two different types of catalysts: ZSM-5 zeolite and red mud. Appl Catal B Environ 104(3–4):211–219
Onwudili JA, Muhammad C, Williams PT (2019) Influence of catalyst bed temperature and properties of zeolite catalysts on pyrolysis-catalysis of a simulated mixed plastics sample for the production of upgraded fuels and chemicals. J Energy Inst 92(5):1337–1347
Miskolczi N, Ateş F (2016) Thermo-catalytic co-pyrolysis of recovered heavy oil and municipal plastic wastes. J Anal Appl Pyrolysis 117:273–281
Yao D, Zhang Y, Williams PT, Yang H, Chen H (2018) Co-production of hydrogen and carbon nanotubes from real-world waste plastics: influence of catalyst composition and operational parameters. Appl Catal B Environ 221:584–597
Wu C, Williams PT (2010) Pyrolysis–gasification of plastics, mixed plastics and real-world plastic waste with and without Ni–mg–Al catalyst. Fuel 89(10):3022–3032
Passamonti FJ, Sedran U (2012) Recycling of waste plastics into fuels. LDPE conversion in FCC. Appl Catal B Environ 125:499–506
Wong SL, Ngadi N, Abdullah TAT, Inuwa IM (2015) Current state and future prospects of plastic waste as source of fuel: a review. Renew Sust Energ Rev 50:1167–1180
Kassargy C, Awad S, Burnens G, Kahine K, Tazerout M (2017) Experimental study of catalytic pyrolysis of polyethylene and polypropylene over USY zeolite and separation to gasoline and diesel-like fuels. J Anal Appl Pyrolysis 127:31–37
Anuar Sharuddin SD, Abnisa F, Wan Daud WMA, Aroua MK (2016) A review on pyrolysis of plastic wastes. Energy Convers Manag 115:308–326
Miandad R, Barakat MA, Rehan M, Aburiazaiza AS, Ismail IMI, Nizami AS (2017) Plastic waste to liquid oil through catalytic pyrolysis using natural and synthetic zeolite catalysts. Waste Manag 69:66–78
Feghali E, Cantat T (2015) Room temperature organocatalyzed reductive depolymerization of waste polyethers, polyesters, and polycarbonates. ChemSusChem 8(6):980–984
Escola JM, Aguado J, Serrano DP, García A, Peral A, Briones L, Calvo R, Fernandez E (2011) Catalytic hydroreforming of the polyethylene thermal cracking oil over Ni supported hierarchical zeolites and mesostructured aluminosilicates. Appl Catal B Environ 106(3–4):405–415
Rafael García J, María Bidabehere C, Sedran U (2020) Non-uniform size of catalyst particles. Impact on the effectiveness factor and the determination of kinetic parameters. Chem Eng J 396:124994
Song X, Liu F, Li L, Yang X, Yu S, Ge X (2013) Hydrolysis of polycarbonate catalyzed by ionic liquid [Bmim][ac]. J Hazard Mater 244:204–208
Patil D, Madhamshettiwar S (2014) Kinetics and thermodynamic studies of depolymerization of nylon waste by hydrolysis reaction. J Appl Chem 2014:1–8
Zhou X, Wang C, Fang C, Yu R, Li Y, Lei W (2019) Structure and thermal properties of various alcoholysis products from waste poly (ethylene terephthalate). Waste Manag 85:164–174
Kannan P, Al Shoaibi A, Srinivasakannan C (2013) Energy recovery from co-gasification of waste polyethylene and polyethylene terephthalate blends. Comput Fluids 88:38–42
Acomb JC, Wu C, Williams PT (2014) Control of steam input to the pyrolysis-gasification of waste plastics for improved production of hydrogen or carbon nanotubes. Appl Catal B Environ 147:571–584
Arena U, Di Gregorio F (2014) Energy generation by air gasification of two industrial plastic wastes in a pilot scale fluidized bed reactor. Energy 68:735–743
Lopez G, Artetxe M, Amutio M, Alvarez J, Bilbao J, Olazar M (2018) Recent advances in the gasification of waste plastics. A critical overview. Renew Sust Energ Rev 82:576–596
Lee JW, Yu TU, Lee JW, Moon JH, Jeong HJ, Park SS, Yang W, Lee UD (2013) Gasification of mixed plastic wastes in a moving-grate Gasifier and application of the producer gas to a power generation engine. Energy Fuel 27(4):2092–2098
Kasar P, Sharma DK, Ahmaruzzaman M (2020) Thermal and catalytic decomposition of waste plastics and its co-processing with petroleum residue through pyrolysis process. J Clean Prod 265:121639
Chen X, Kong L, Bai J, Dai X, Li H, Bai Z, Li W (2017) The key for sodium-rich coal utilization in entrained flow gasifier: the role of sodium on slag viscosity-temperature behavior at high temperatures. Appl Energy 206:1241–1249
Wang C, Wang H, Fu J, Zhang L, Luo C, Liu Y (2015) Flotation separation of polyvinyl chloride and polyethylene terephthalate plastics combined with surface modification for recycling. Waste Manag 45:112–117
Gu H, Liu C, Zhu J, Gu J, Wujcik EK, Shao L, Wang N, Wei H, Scaffaro R, Zhang J, Guo Z (2018) Introducing advanced composites and hybrid materials. Adv Compos Hybrid Mater 1:1–5
Pan D, Ge S, Tian J, Shao Q, Guo L, Liu H, Wu S, Ding T, Guo Z (2019) Research Progress in the field of adsorption and catalytic degradation of sewage by Hydrotalcite-derived materials. Chem Rec 20:355–369
Baheti V, Militky J, Mishra R, Behera B (2016) Thermomechanical properties of glass fabric/epoxy composites filled with fly ash. Compos Part B 85:268–276
Raiisi-Nia MR, Aref-Azar A, Fasihi M (2014) Acrylonitrile–butadiene rubber functionalization for the toughening modification of recycled poly (ethylene terephthalate). J Appl Polym Sci 131(13):40483
Faruk O, Bledzki AK, Fink HP, Sain M (2012) Biocomposites reinforced with natural fibers: 2000–2010. Prog Polym Sci 37(11):1552–1596
Pickering KL, Efendy MA, Le TM (2016) A review of recent developments in natural fibre composites and their mechanical performance. Compos Part A 83:98–112
Karaduman Y, Gokcan D, Onal L (2013) Effect of enzymatic pretreatment on the mechanical properties of jute fiber-reinforced polyester composites. J Compos Mater 47(10):1293–1302
Laadila MA, Hegde K, Rouissi T, Brar SK, Galvez R, Sorelli L, Cheikh RB, Paiva M, Abokitse K (2017) Green synthesis of novel biocomposites from treated cellulosic fibers and recycled bio-plastic polylactic acid. J Clean Prod 164:575–586
Lee ZH, Paul SC, Kong SY, Susilawati S, Yang X (2019) Modification of waste aggregate PET for improving the concrete properties. Adv Civ Eng 2019:6942052
Venkatesan R, Rajeswari N (2018) Poly(butylene adipate-co-terephthalate) bionanocomposites: effect of SnO2 NPs on mechanical, thermal, morphological, and antimicrobial activity. Adv Compos Hybrid Mater 1:731–740
Aqeel SM, Huang ZY, Walton J, Baker C, Falkner D, Liu Z, Wang Z (2018) Polyvinylidene fluoride (PVDF)/polyacrylonitrile (PAN)/carbon nanotube nanocomposites for energy storage and conversion. Adv Compos Hybrid Mater 1:185–192
Padhan RK, Sreeram A (2018) Enhancement of storage stability and rheological properties of polyethylene (PE) modified asphalt using cross linking and reactive polymer based additives. Constr Build Mater 188:772–780
Li Y, Lv L, Wang W, Zhang J, Lin J, Zhou J, Dong M, Gan Y, Seok I, Guo Z (2020) Effects of chlorinated polyethylene and antimony trioxide on recycled polyvinyl chloride/acryl-butadiene-styrene blends: flame retardancy and mechanical properties. Polymer 190:122198
Fischer J, Freudenthaler PJ, Lang RW, Buchberger W, Mantell SC (2019) Chlorinated water induced aging of pipe grade polypropylene random copolymers. Polymers 11(6):996
Lu J, Kumagai S, Ohno H, Kameda T, Saito Y, Yoshioka T, Fukushima Y (2019) Deducing targets of emerging technologies based on ex ante life cycle thinking: case study on a chlorine recovery process for polyvinyl chloride wastes. Resour Conserv Recycl 151:104500
Râpă M, Spurcaciu BN, Coman G, Nicolae CA, Gabor RA, Ghioca PN, Berbecaru AC, Matei E, Predescu C (2020) Effect of styrene-Diene block copolymers and Glass bubbles on the post-consumer recycled polypropylene properties. Materials 13(3):543
Ragaert K, Delva L, Van Geem K (2017) Mechanical and chemical recycling of solid plastic waste. Waste Manag 69:24–58
Singh RK, Ruj B (2016) Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste. Fuel 174:164–171
Miandad R, Nizami A, Rehan M, Barakat M, Khan M, Mustafa A, Ismail I, Murphy J (2016) Influence of temperature and reaction time on the conversion of polystyrene waste to pyrolysis liquid oil. Waste Manag 58:250–259
Nizami A, Rehan M, Ouda OK, Shahzad K, Sadef Y, Iqbal T, Ismail IM (2015) An argument for developing waste-to-energy technologies in Saudi Arabia. Chem Eng Trans 45:337–342
Mahari WAW, Chong CT, Cheng CK, Lee CL, Hendrata K, Yek PNY, Ma NL, Lam SS (2018) Production of value-added liquid fuel via microwave co-pyrolysis of used frying oil and plastic waste. Energy 162:309–317
Honus S, Kumagai S, Němcek O, Yoshioka T (2016) Replacing conventional fuels in USA, Europe, and UK with plastic pyrolysis gases – part I: experiments and graphical interchangeability methods. Energy Convers Manag 126:1118–1127
Kerdnawee K, Termvidchakorn C, Yaisanga P, Pakchamsai J, Chookiat C, Eiadua A, Wongwiriyapan W, Chaiwat W, Ratchahat S, Faungnawakij K (2017) Present advancement in production of carbon nanotubes and their derivatives from industrial waste with promising applications. Kona Powder Part J 34(34):24–43
Leng Z, Zhang Z, Zhang Y, Wang Y, Yu H, Ling T (2018) Laboratory evaluation of electromagnetic density gauges for hot-mix asphalt mixture density measurement. Constr Build Mater 158:1055–1064
Xu H, Xing C, Zhang H, Li H, Tan Y (2019) Moisture seepage in asphalt mixture using X-ray imaging technology. Int J Heat Mass Transf 131:375–384
Wang T, Xiao F, Zhu X, Huang B, Wang J, Amirkhanian SN (2018) Energy consumption and environmental impact of rubberized asphalt pavement. J Clean Prod 180:139–158
Modarres A, Hamedi H (2014) Effect of waste plastic bottles on the stiffness and fatigue properties of modified asphalt mixes. Mater Des 61(61):8–15
Kim H, Lee S (2013) Laboratory investigation of different standards of phase separation in crumb rubber modified asphalt binders. J Mater Civ Eng 25(12):1975–1978
Sun D, Lu T, Xiao F, Zhu X, Sun G (2017) Formulation and aging resistance of modified bio-asphalt containing high percentage of waste cooking oil residues. J Clean Prod 161:1203–1214
Wang H, Liu X, Apostolidis P, Scarpas T (2018) Non-Newtonian behaviors of crumb rubber-modified bituminous binders. Appl Sci 8(10):1760
Kalantar ZN, Karim MR, Mahrez A (2012) A review of using waste and virgin polymer in pavement. Constr Build Mater 33:55–62
Leng Z, Padhan RK, Sreeram A (2018) Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt. J Clean Prod 180:682–688
Hu C, Lin W, Partl M, Wang D, Yu H, Zhang Z (2018) Waste packaging tape as a novel bitumen modifier for hot-mix asphalt. Constr Build Mater 193:23–31
Mansour AMH, Ali SA (2015) Reusing waste plastic bottles as an alternative sustainable building material. Energy Sustain Dev 24:79–85
Frigione M (2010) Recycling of PET bottles as fine aggregate in concrete. Waste Manag 30(6):1101–1106
Corinaldesi V, Donnini J, Nardinocchi A (2015) Lightweight plasters containing plastic waste for sustainable and energy-efficient building. Constr Build Mater 94:337–345
Khater HM (2019) Valorization of cement kiln dust in activation and production of hybrid geopolymer composites with durable characteristics. Adv Compos Hybrid Mater 2:301–311
Wu C, Wang Z, Wang L, Williams PT, Huang J (2012) Sustainable processing of waste plastics to produce high yield hydrogen-rich synthesis gas and high quality carbon nanotubes. RSC Adv 2(10):4045–4047
Zhang J, Yan B, Wan S, Kong Q (2013) Converting polyethylene waste into large scale one-dimensional Fe3O4@ C composites by a facile one-pot process. Ind Eng Chem Res 52(16):5708–5712
Pol VG, Thackeray MM (2011) Spherical carbon particles and carbon nanotubes prepared by autogenic reactions: evaluation as anodes in lithium electrochemical cells. Energy Environ Sci 4(5):1904–1912
Li J, Wu G, Xu Z (2015) Tribo-charging properties of waste plastic granules in process of tribo-electrostatic separation. Waste Manag 35:36–41
Gao C, Deng W, Pan F, Feng X, Li Y (2020) Superhydrophobic electrospun PVDF membranes with silanization and fluorosilanization co-functionalized CNTs for improved direct contact membrane distillation. Eng Sci 9:35–43
Oh E, Lee J, Jung S, Cho S, Kim H, Lee S, Lee K, Song K, Choi C, Han DS (2012) Turning refuse plastic into multi-walled carbon nanotube forest. Sci Technol Adv Mater 13(2):025004–025004
Bazargan A, McKay G (2012) A review – synthesis of carbon nanotubes from plastic wastes. Chem Eng J 195-196:377–391
Zhang J, Du J, Qian Y, Xiong S (2010) Synthesis, characterization and properties of carbon nanotubes microspheres from pyrolysis of polypropylene and maleated polypropylene. Mater Res Bull 45(1):15–20
Pol VG, Thiyagarajan P (2010) Remediating plastic waste into carbon nanotubes. J Environ Monit 12(2):455–459
Idrees M, Liu L, Batool S, Luo H, Liang J, Xu B, Wang S, Kong J (2019) Cobalt-doping enhancing electrochemical performance of silicon/carbon Nanocomposite as highly efficient anode materials in Lithium-ion batteries. Eng Sci 6:64–67
Das TK, Ghosh P, Das NC (2019) Preparation, development, outcomes, and application versatility of carbon fiber-based polymer composites: a review. Adv Compos Hybrid Mater 2:214–233
Kumari TSD, Jebaraj AJ, Raj TA, Jeyakumar D, Kumar TP (2016) A Kish graphitic lithium-insertion anode material obtained from non-biodegradable plastic waste. Energy 95:483–493
Wei T, Zhang Z, Zhu Z, Zhou X, Wang Y, Wang Y, Zhuang Q (2019) Recycling of waste plastics and scalable preparation of Si/CNF/C composite as anode material for lithium-ion batteries. Ionics 25(4):1523–1529
Park SH, Kim SH (2014) Poly (ethylene terephthalate) recycling for high value added textiles. Fash Text 1(1):1–17
Pan D, Su F, Liu H, Ma Y, Das R, Hu Q, Liu C, Guo Z (2020) The properties and preparation methods of different boron nitride nanostructures and applications of related Nanocomposites. Chem Rec 20:1–25
Alsalem SM, Lettieri P, Baeyens J (2009) Recycling and recovery routes of plastic solid waste (PSW): a review. Waste Manag 29(10):2625–2643
Qin Y, Yin X, Zhou Y, Xu J, Wang L, Wang H, Chen Z (2019) Photo-polymerized trifunctional acrylate resin/magnesium hydroxide fluids/cotton fabric composites with enhancing mechanical and moisture barrier properties. Adv Compos Hybrid Mater 2:320–329
Li G, Mai Z, Shu X, Chen D, Liu M, Xu W (2019) Superhydrophobic/superoleophilic cotton fabrics treated with hybrid coatings for oil/water separation. Adv Compos Hybrid Mater 2:254–265
Mohanty AK, Vivekanandhan S, Pin JM, Misra M (2018) Composites from renewable and sustainable resources: challenges and innovations. Science 362(6414):536–542
Zhang H, Hippalgaonkar K, Buonassisi T, Løvvik OM, Sagvolden E, Ding D (2018) Machine learning for novel thermal-materials discovery: early successes, opportunities, and challenges. ES Energy Environ 2:1–8