Research on Modification of Steel Fiber in Investment Casting shell

C.M. Cheah, C.K. Chua, C.W. Lee, Rapid prototyping and tooling techniques: a review of applications for rapid investment casting. Int J Adv Manuf. Technol. 25, 308–320 (2005)

C. Yuan, S. Jones, S. Blackburn, The influence of autoclave steam on polymer and organic fiber modified ceramic shells. J. Eur. Ceram. Soc. 25, 1081–1087 (2005)

Lu. Huang Pengpeng, Y.Q. Gang, Effect of ceramic and nylon fiber content on composite silica sol slurry properties and bending strength of investment casting shell. Materials. 12, 2788–2797 (2019)

Lü. Kai, D. Zehai, L. Xiangdong, Effects of fiber length and mixing routes on fiber reinforced shell for investment casting. Ceram. Int. 45, 6925–6930 (2019)

S. Kumar, D.B. Karunakar, Enhancing the permeability and properties of ceramic shell in investment casting process using ABS powder and needle coke. Inter. Metalcast. 13, 588–596 (2019). https://doi.org/10.1007/s40962-018-00297-7

Y. Li, X. Liu, K. Lü, X. Du, Preparation of fiber-reinforced shell by airflow placement fiber technology for investment casting. Inter. Metalcast. 13(4), 979–986 (2019). https://doi.org/10.1007/s40962-019-00323-2

D.H. Lu, Z. Wang, Y.H. Jiang, Effect of aluminium silicate fiber modification on crack-resistance of a ceramic mould. China Foundry. 9, 322–327 (2012)

S. Kumar, D.B. Karunakar, Characterization and properties of ceramic shells in investment casting process. Inter. Metalcast. 15, 98–107 (2021). https://doi.org/10.1007/s40962-020-00421-6

S. Pattnaik, M.K. Sutar, Effect of saw dust content on slurry rheology and mechanical properties of the investment casting ceramic shell. Inter. Metalcast. 15, 470–487 (2021). https://doi.org/10.1007/s40962-020-00478-3

M.B. Madan, P. Sarojrani, K. Mihir, Thermo-mechanical analysis of investment casting ceramic shell: a case study. Measurement 147, 1068–1071 (2019)

L. Tian, A. Joe, S.L. Boyan, Investment casting and experimental testing of heat sinks designed by topology optimization. Int. J. Heat Mass Transf. 127, 396–412 (2018)

D. Anna, N. Krzysztof, G. Jakub, Aluminum inserts for enhancing heat transfer in PCM accumulator. Materials 13, 415–425 (2020)

U. Veit, C. Rüssel, Viscosity and liquidus temperature of quaternary glasses close to an eutectic composition in the CaO-MaO-Al2O3-SiO2 system. J. Mater. Sci. 52, 8280–8292 (2017)

R.A. Eppler, Mechanism of formation of zircon stains. J. Am. Ceram. Soc. 53, 457–462 (1970)

K. Lü, X. Liu, Z. Duan, Effect of firing temperature and time on hybrid fiber-reinforced shell for investment casting. Inter. Metalcast. 13, 666–673 (2019). https://doi.org/10.1007/s40962-018-0280-x

K. Lü, X. Liu, Du. Zhaoxin, Y. Li, Properties of hybrid fibre reinforced shell for investment casting. Ceram. Int. 42, 15397–15404 (2016)