Research on Friction during Hot Deformation of Al-Alloys at High Strain Rate
Tóm tắt
The paper is linked to the investigation of lubricants for massive hot forging. It was observed temperature range of 200-470°C and screw press was used for tests. The research on friction has been done for Al-Mg and Al-Cu-Mg-Fe-Ni aluminium alloys. In this connection, physical and numerical investigation of friction are performed. On the basis of the ring upsetting technique, the effect of temperature on the friction factor value has been investigated. The regressions for the relationship between friction factor and temperature for all lubricants under study have been obtained. Moreover, the sets of calibration curves were drawn. Each set of calibration curves corresponds to the definite type of aluminium alloy as well as definite conditions of deformation. Some practical recommendations were given.
Tài liệu tham khảo
M. Kunogi, On Plastic Deformation of Hollow Cylinders Under Axial Compressive Loading. Rep. Sci. Res. Inst. (Tokyo) 2 (1954) 63-92.
A.T. Male, M.G. Cocroft, Method for the Determination of the Coefficient of Friction of Metals Under Conditions of Bulk Plastic Deformation. J.Instit.Metals. 93 (1964-65) 38-46.
M. Burgdorf, Investigation of Friction Values for Metal Forming Processes by the Ring Compression Method. Industrie-Anzierger. 89 (1967) 799
K.P.Rao, K.Sivaram, A review of ring-compression testing and applicability of the calibration curves, J.Mat.Proc.Technol. 37 (1993) 295-318.
P.Petrov, Generalized approach to the choice of lubricant for hot isothermal forging of aluminium alloys, Computer Methods in Materials Science 7(2) (2007 106-111.
A.N. Levanov, V.L. Kolmogorov, S.P. Burkin, B.R. Kartak, U.V. Ashpur and U.I. Spasskiy, Contact Friction in Metal Forging, Metallurgia, Moscow (1976).
P.Petrov, M.Petrov, Experimental and numerical investigation of friction in hot isothermal deformation of aluminium alloy AA3003, The 7th International ESAFORM Conference on Material Forming, Norway, Romania, Cluj-Napoca, 27-29 April, 2005, p.511-514.
P.G. Mikliev, Mechanical properties of Light Alloys in Temperatures and Strain Rates of its Forging, Metallurgia, Moscow (1976).