Research and application of online monitoring of coal and biomass co-combustion and biomass combustion characteristics based on combustion flame

Indrawan, 2020, Distributed power generation via gasification of biomass and municipal solid waste: a review, J. Energy Inst., 93, 2293, 10.1016/j.joei.2020.07.001 Li, 2012, Co-firing based on biomass torrefaction in a pulverized coal boiler with aim of 100% fuel switching, Appl. Energy, 99, 344, 10.1016/j.apenergy.2012.05.046 Sami, 2001, Co-firing of coal and biomass fuel blends, Prog. Energy Combust. Sci., 27, 171, 10.1016/S0360-1285(00)00020-4 Madanayake, 2017, Biomass as an energy source in coal co-firing and its feasibility enhancement via pre-treatment techniques, Fuel Process. Technol., 159, 287, 10.1016/j.fuproc.2017.01.029 Ashraf, 2022, A comparative performance evaluation of co-combustion of coal and biomass in drop tube furnace, J. Energy Inst., 100, 55, 10.1016/j.joei.2021.10.008 Lüschen, 2013, Economic viability of biomass cofiring in new hard-coal power plants in Germany, Biomass Bioenergy, 57, 33, 10.1016/j.biombioe.2012.11.017 Dai, 2008, Overview and some issues related to co-firing biomass and coal, Can. J. Chem. Eng., 86, 367, 10.1002/cjce.20052 Fernández, 2012, Study of main combustion characteristics for biomass fuels used in boilers, Fuel Process. Technol., 103, 16, 10.1016/j.fuproc.2011.12.032 Vassilev, 2015, Advantages and disadvantages of composition and properties of biomass in comparison with coal: an overview, Fuel, 158, 330, 10.1016/j.fuel.2015.05.050 Chen, 2019, Co-combustion characteristics study of bagasse, coal and their blends by thermogravimetric analysis, J. Energy Inst., 92, 364, 10.1016/j.joei.2017.12.008 Niu, 2016, Ash-related issues during biomass combustion: alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures, Prog. Energy Combust. Sci., 52, 1, 10.1016/j.pecs.2015.09.003 Unchaisri, 2022, Investigation of ash formation and deposit characteristics in CFB co-combustion of coal with various biomass fuels, J. Energy Inst., 105, 42, 10.1016/j.joei.2022.08.005 Lv, 2022, Investigation on ash deposition formation during co-firing of coal with wheat straw, J. Energy Inst., 100, 148, 10.1016/j.joei.2021.11.009 Zheng, 2005, Deactivation of V2O5-WO3-TiO2 SCR catalyst at a biomass-fired combined heat and power plant, Appl. Catal. B Environ., 60, 253, 10.1016/j.apcatb.2005.03.010 Xie, 2021, The influence of the high potassium biomass on the ash fusion characteristics of coal, J. Energy Inst., 95, 52, 10.1016/j.joei.2020.12.005 Deng, 2017, A study on deactivation of V2O5WO3TiO2 SCR catalyst by alkali metals during entrained-flow combustion, J. Energy Inst., 90, 743, 10.1016/j.joei.2016.07.003 Li, 2021, Comprehensive study on co-combustion behavior of pelletized coal-biomass mixtures in a concentrating photothermal reactor, Fuel Process. Technol., 211, 10.1016/j.fuproc.2020.106596 Truffin, 2005, Comparison and extension of methods for acoustic identification of burners, Combust. Flame, 142, 388, 10.1016/j.combustflame.2005.04.001 Shaddix, 1999 Sujatha, 2012, Flame Monitoring in power station boilers using image processing, ICTACT Journal on Image and Video Processing, 2 Arias, 2008, Photodiode-based sensor for flame sensing and combustion-process monitoring, Appl. Opt., 47, 5541, 10.1364/AO.47.005541 Romero, 2005, Spectrometer-based combustion monitoring for flame stoichiometry and temperature control, Appl. Therm. Eng., 25, 659, 10.1016/j.applthermaleng.2004.07.020 Wójcik, 2008, vol. 56 Wang, 2002, The research on the estimation for the NOx emissive concentration of the pulverized coal boiler by the flame image processing technique, Fuel, 81, 2113, 10.1016/S0016-2361(02)00145-X Chi, 2010, Investigations into the ignition behaviors of pulverized coals and coal blends in a drop tube furnace using flame monitoring techniques, Fuel, 89, 743, 10.1016/j.fuel.2009.06.010 Zou, 2015, Ignition behaviors of pulverized coal particles in O2/N2 and O2/H2O mixtures in a drop tube furnace using flame monitoring techniques, Proc. Combust. Inst., 35, 3629, 10.1016/j.proci.2014.06.067 Sarroza, 2017, Characterising pulverised fuel ignition in a visual drop tube furnace by use of a high-speed imaging technique, Fuel Process. Technol., 157, 1, 10.1016/j.fuproc.2016.11.002 Lu, 2004, A digital imaging based multifunctional flame monitoring system, IEEE Trans. Instrum. Meas., 53, 1152, 10.1109/TIM.2004.830571 Lu, 2008, Impact of co-firing coal and biomass on flame characteristics and stability, Fuel, 87, 1133, 10.1016/j.fuel.2007.07.005 Sawicki, 2017, Determining of combustion process state based on flame images analysis using k-NN classification Sun, 2011, Flame stability monitoring and characterization through digital imaging and spectral analysis, Meas. Sci. Technol., 22, 10.1088/0957-0233/22/11/114007 Yan, 2002, Monitoring and characterisation of pulverised coal flames using digital imaging techniques, Fuel, 81, 647, 10.1016/S0016-2361(01)00161-2 Lu, 2005, Vision based monitoring and characterisation of combustion flames Gilabert, 2007, Three-dimensional tomographic reconstruction of the luminosity distribution of a combustion flame, IEEE Trans. Instrum. Meas., 56, 1300, 10.1109/TIM.2007.900161 Hossain, 2012, Optical fiber imaging based tomographic reconstruction of burner flames, IEEE Trans. Instrum. Meas., 61, 1417, 10.1109/TIM.2012.2186477 Hu, 2016, An experimental study on the spectroscopic characteristics in coal-water slurry diffusion flames based on hot-oxygen burner technology, Fuel Process. Technol., 154, 168, 10.1016/j.fuproc.2016.08.029 Krabicka, 2011, Profiling and characterization of flame radicals by combining spectroscopic imaging and neural network techniques, IEEE Trans. Instrum. Meas., 60, 1854, 10.1109/TIM.2010.2102411 Li, 2015, Prediction of pollutant emissions of biomass flames through digital imaging, contourlet transform, and support vector regression modeling, IEEE Trans. Instrum. Meas., 64, 2409, 10.1109/TIM.2015.2411999 Li, 2015, Prediction of NOx emissions from a biomass fired combustion process through digital imaging, non-negative matrix factorization and fast sparse regression, 176 González-Cencerrado, 2015, Experimental analysis of biomass co-firing flames in a pulverized fuel swirl burner using a CCD based visualization system, Fuel Process. Technol., 130, 299, 10.1016/j.fuproc.2014.10.041 Ge, 2020 Holtmeyer, 2013, The impact of biomass cofiring on volatile flame length, Energy Fuel., 27, 7762, 10.1021/ef4013505 Li, 2013, Flame characteristics of pulverized torrefied-biomass combusted with high-temperature air, Combust. Flame, 160, 2585, 10.1016/j.combustflame.2013.05.010 Damstedt, 2007, Biomass cofiring impacts on flame structure and emissions, Proc. Combust. Inst., 31, 2813, 10.1016/j.proci.2006.07.155 Kotyra, 2012, Assessment of biomass-coal co-combustion on the basis of flame image, Przeglad Elektrotechniczny, 88, 241 Xu, 2010 Qi, 2021 J. Matthes, P. Waibel, M. Vogelbacher, H.-J. Gehrmann, H.B. Keller, Camera-based Online Flame-Stability-Monitor for Load-Flexible Biomass Co-combustion. Kotyra, 2013, Detection of biomass-coal unstable combustion using frequency analysis of image series, Przeglad Elektrotechniczny, 3b, 279 Wu, 2015 Garami, 2018, Reaction zone monitoring in biomass combustion, Control Eng. Pract., 74, 95, 10.1016/j.conengprac.2018.02.009 Sawicki, 2018, Evaluation of the possibility of using fractal analysis to study the flame in the co-firing process, 420 Omiotek, 2021, Flame image processing and classification using a pre-trained VGG16 model in combustion diagnosis, Sensors, 21, 500, 10.3390/s21020500 Li, 2016, Research on flame radical imaging and extreme learning machine to prediction of NOx emissions, J. Syst. Simul., 28, 1179 Qiu, 2011, An autoadaptive edge-detection algorithm for flame and fire image processing, IEEE Trans. Instrum. Meas., 61, 1486, 10.1109/TIM.2011.2175833 Bai, 2017 Sawicki, 2016 Cousineau-Pelletier, 2009, Monitoring and control of biomass boilers using multivariate image analysis Bai, 2017, Multi-mode combustion process monitoring on a pulverised fuel combustion test facility based on flame imaging and random weight network techniques, Fuel, 202, 656, 10.1016/j.fuel.2017.03.091 Peña, 2018, Experimental study on the effects of co-firing coal mine waste residues with coal in PF swirl burners, Energy, 157, 45, 10.1016/j.energy.2018.05.091 Meng, 2021, Chaos identification and instability analysis of biomass pellet combustion flames based 0-1 test method, Combust. Sci. Technol., 1 Li, 2016, Prediction of NOx emissions from a biomass fired combustion process based on flame radical imaging and deep learning techniques, Combust. Sci. Technol., 188, 233, 10.1080/00102202.2015.1102905 Grądz, 2020, Research on the combustion process using time series, Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska, 10, 52 Valliappan, 2011, Detecting burner instabilities using joint-time frequency methods whilst Co-firing coal and biomass Grądz, 2019, Analysis of changes in flame luminosity for process diagnostics, 84 Yan, 2021, Electrostatic sensors–Their principles and applications, Measurement, 169, 10.1016/j.measurement.2020.108506 Wu, 2020, Flame boundary measurement using an electrostatic sensor array, IEEE Trans. Instrum. Meas., 70, 1 Zhang, 2022, A self-diagnostic flame monitoring system incorporating acoustic, optical, and electrostatic sensors, 1 Wu, 2022, Oscillation frequency measurement of gaseous diffusion flames using electrostatic sensing techniques, Fuel, 311, 10.1016/j.fuel.2021.122605 Rodrigues, 2012, A novel on-line system for measurements of flame steadiness and spectroscopic analysis by integration of multi-branch fibre optics to photonic sensors, 305 Valliappan, 2012, The monitoring and control of burners Co-firing coal and biomass, 139 Ge, 2021, Biomass fuel identification using flame spectroscopy and tree model algorithms, Combust. Sci. Technol., 193, 1055, 10.1080/00102202.2019.1680654 Castillo, 2017, Ieee, study spectral emission of burning biomass in the VIS and NIR spectral band Striūgas, 2019, Investigation of K∗, Na∗ and Ca∗ flame emission during single biomass particle combustion, Combust. Sci. Technol., 191, 151, 10.1080/00102202.2018.1452408 Katta, 2009, Impact of soot on flame flicker, Proc. Combust. Inst., 32, 1343, 10.1016/j.proci.2008.06.152 Cai, 2004, The measurement of radiation spectra of flame of different fuel, J. Eng. Thermophys., 171 Li, 2018 Cheng, 2004, Investigate into the characteristic emission line of flame, J. Eng. Thermophys., 519 Zhou, 2019, Online blend-type identification during<? show [AQ ID= Q1]?> co-firing coal and biomass using SVM and flame emission spectrum in a pilot-scale furnace, IET Renew. Power Gener., 13, 253, 10.1049/iet-rpg.2018.5267 Yuan, 2018 Li, 2018, Biomass fuel identification based on flame spectroscopy and feature engineering, Proceedings of the CSEE, 38, 4474 Sun, 2015, Quantitative assessment of flame stability through image processing and spectral analysis, IEEE Trans. Instrum. Meas., 64, 3323, 10.1109/TIM.2015.2444262 Moguel, 2018, Oscillating coal and biomass flames: a spectral and digital imaging approach for air and oxyfuel conditions, Fuel Process. Technol., 173, 243, 10.1016/j.fuproc.2018.02.002 Smart, 2010, Characterisation of an oxy-coal flame through digital imaging, Combust. Flame, 157, 1132, 10.1016/j.combustflame.2009.10.017 Molcan, 2009, Characterisation of biomass and coal co-firing on a 3 MWth combustion test facility using flame imaging and gas/ash sampling techniques, Fuel, 88, 2328, 10.1016/j.fuel.2009.06.027 Lu, 2006, Monitoring of oscillatory characteristics of pulverized coal flames through image processing and spectral analysis, IEEE Trans. Instrum. Meas., 55, 226, 10.1109/TIM.2005.861254 Samantaray, 2015, Analysis of industrial flame characteristics and constancy study using image processing technique, J. Mech. Eng. Sci., 9, 1604, 10.15282/jmes.9.2015.8.0156 Thornock, 2015, Radiative intensity, no emissions, and burnout for oxygen enriched biomass combustion, Proc. Combust. Inst., 35, 2777, 10.1016/j.proci.2014.06.148 Noroozi, 2015, Effect of heat recirculation in biomass flame stability within a cylindrical micro-combustor, Int. J. Eng., 28, 454 Ye, 2020, The study of co-combustion characteristics of coal and microalgae by single particle combustion and TGA methods, J. Energy Inst., 93, 508, 10.1016/j.joei.2019.07.001 Lei, 2017, Combustion characteristics of single particles from bituminous coal and pine sawdust in O2/N2, O2/CO2, and O2/H2O atmospheres, Energies, 10, 1695, 10.3390/en10111695 Yan, 2019, Online measurement of the flame temperature and emissivity during biomass volatile combustion using spectral thermometry and image thermometry, Energy Fuel., 34, 907, 10.1021/acs.energyfuels.9b03188 Yan, 2021, Determination of flame temperatures and soot volume fractions during combustion of biomass pellets, Energy Fuel., 35, 2313, 10.1021/acs.energyfuels.0c03921 Zheng, 2020, Temperature and emissivity measurements from combustion of pine wood, rice husk and fir wood using flame emission spectrum, Fuel Process. Technol., 204, 10.1016/j.fuproc.2020.106423 Salinas, 2020, Experiments for combustion temperature measurements in a sugarcane bagasse large-scale boiler furnace, Appl. Therm. Eng., 175, 10.1016/j.applthermaleng.2020.115433 Ting, 2017, Biomass fuel identification based on probabilistic neural networks, 33, 87 He, 2013, Qualitative and quantitative analysis of straw content in straw-coal blends using Vis/NIR spectroscopy, ransactions of the Chinese Society of Agricultural Engineering, 29, 188 Chi, 2009 Li, 2013 Li, 2015, On-line identification of biomass fuels based on flame radical imaging and application of radical basis function neural network techniques, IET Renew. Power Gener., 9, 323, 10.1049/iet-rpg.2013.0392 Zhou, 2014, Support vector machine based online coal identification through advanced flame monitoring, Fuel, 117, 944, 10.1016/j.fuel.2013.10.041 Paulauskas, 2020, Online determination of potassium and sodium release behaviour during single particle biomass combustion by FES and ICP-MS, Sci. Total Environ., 746, 10.1016/j.scitotenv.2020.141162 Liao, 2012, Experimental study on the combustion characteristics and alkali transformation behavior of straw, Energy Fuel., 26, 910, 10.1021/ef2016107 Li, 2021, Study on spectral characteristics of combustion flame of single particle solid fuels, J. Combust. Sci. Technol., 27, 271 Liu, 2020, Experimental study of potassium release during biomass-pellet combustion and its interaction with inhibitive additives, Fuel, 260, 10.1016/j.fuel.2019.116346 Dong, 2020, Study on the ignition characteristics and alkali release of single coal particles with additional different forms of potassium, Fuel Process. Technol., 203, 10.1016/j.fuproc.2020.106385 Li, 2021, Online dynamic prediction of potassium concentration in biomass fuels through flame spectroscopic analysis and recurrent neural network modelling, Fuel, 304, 10.1016/j.fuel.2021.121376 Hernandez, 2008, Flame imaging as a diagnostic tool for industrial combustion, Combust. Flame, 155, 509, 10.1016/j.combustflame.2008.06.010 Li, 2012, Prediction of nox emissions throughflame radical imaging and neural network based soft computing, 502 Li, 2014, Prediction of pollutant emissions of biomass flames using digital imaging, contourlet transform and radial basis function network techniques, 697