Replication of micro and nano surface geometries

Alabran, 2007, Effect of Tooling and Injection Molding Conditions on Nanoscale Replication of Thermoplastic Elastomers, 1990 Alberto, 2008, Si Moulds for Glass and Polymer Microlenses Replication, Proceedings of the SPIE – The International Society for Optical Engineering, 6992, 10.1117/12.783093 Alting, 2003, Micro Engineering, CIRP Annals – Manufacturing Technology, 52, 635, 10.1016/S0007-8506(07)60208-X Angelov, 2006, Polymer Replication and Characterization of a Ruled Diffraction Grating, 2516 Angelov, 2007, A Feasibility Study for Sub-100nm Polymer Injection Molding, 2987 ASTM E 1351.06 (2006) Production and Evaluation of Field Metallographic Replicas. Autodesk Moldflow Insight (2011) Material Database. Azcarate, 2006, 305 Becker, 1986, Fabrication of Microstructures with High Aspect Ratio and Great Structural Heights by Synchrotron Radiation Lithography, Galvanoforming, and Plastic Moulding (LIGA Process), Microelectronic Engineering, 4, 35, 10.1016/0167-9317(86)90004-3 Becker, 1999, Hot Embossing as a Method for the Fabrication of Polymer High Aspect Ratio Structures, Sensor and Actuator, 83, 130, 10.1016/S0924-4247(00)00296-X Bell, 2004, Next Generation DVD: Application Requirements and Technology, Signal Processing: Image Communication, 19, 909 Bergstrom, 2004, Comparison of Surface Texture Measurement Systems, 13 Berion A, Bissacco G, Hansen HN (2001) Validation of mould concepts for high precision glass moulding Technical University of Denmark, DTU Mechanical Engineering, Report: pp. 1–165. Bidolli, 2009, Le Repliche Metallografiche su Acciai Basso Legati: Confronto tra Differenti Metodologie e Considerazioni Procedurali, Il Giornale Delle Prove Non Distruttive Monitoraggio Diagnostica, 2, 22 Bifano, 1997, Precision Manufacture of Optical Disc Master Stampers, Precision Engineering, 20, 53, 10.1016/S0141-6359(97)89592-X Bigot, 2009, Function and Length Scale Integration in Micro/Nano Manufacturing, 147 Binkowska, 2007, Mass Production of DVDs: Faster More Complex but Cheaper and Simpler, Microsystem Technologies, 13, 139, 10.1007/s00542-006-0159-2 Bissacco, 2005, Precision Manufacturing Methods of Inserts for Injection Molding of Microfluidic Systems, 57 Botzelmann, 2009, Injection Moulding of Micro Patterned Polymer Discs for Optical Rotary Encoders, 95 Brenner, 2005, Fabrication Chain for Prototyping of Microfluidic Chips in Polymers, 111 Brecher, 2006, Finite Element Analysis of the Micro Glass Moulding Process, 251 Brecher, 2008, Micro Structure Surface Functionalisation for Tissue Engineering Application – A Systematic Integrated Approach Towards High Volume Production, vol. 2, 624 Brecher, 2009, Micro Sreucturing of Large Surfaces by Means of Step and Repeat Hot Embossing, 38 Brecher, 2009, Production of Gratings by Means of Step and Repeat Hot Embossing, 363 Bruzzone, 2009, Advances in Engineered Surfaces for Functional Performance, CIRP Annals – Manufacturing Technology, 57, 750, 10.1016/j.cirp.2008.09.003 Butin, 1970, Non Destructive Test by the Replica Method, Non-Destructive Methods, 3, 173, 10.1016/0029-1021(70)90127-1 Byrne, 2008, Bulk Metallic Glasses, Science, 321, 502, 10.1126/science.1158864 Chang, 2004, Development of Rapid Heating and Uniformly Pressing System for Micro Hot Embossing, 942 Chang, 2005, Experimental Study on the Filling of a Micro Injection Moudling with Cylindrical Dot Patterns, International Polymer Processing, XX, 245, 10.3139/217.1884 Chandra, 2008, Replica Molding of High-aspect-ratio (Sub-)micron Hydrogel Pillar Arrays and their Stability in Air and Solvents, Soft Matter, 4, 979, 10.1039/b717711a Chen, 2005, Fabrication of 3D Polymer Microstructures using Electron Beam Lithography and Nanoimprinting Technologies, Journals of Micromechanics and Microengineering, 15, 1894, 10.1088/0960-1317/15/10/015 Chen, 2007, Study on Hot Embossing Molding Process and Replication Effects with Different Aspect-Ratio Micro Channels, 2035 Chen, 2007, Numerical simulation and moldability investigation of micro-features, 2045 Cheng, 2007, Numerical Analysis of Micro-formability of Mg-based Bulk Metallic Glass in Supercooled Liquid Region, Computational Materials Science, 39, 718, 10.1016/j.commatsci.2006.09.005 Chen, 2009, Gold Nanohole Arrays for Biochemical Sensing Fabricated by Soft UV Nanoimprint Lithography, Microelectronics Engineering, 86, 632, 10.1016/j.mee.2008.12.093 Chou, 1995, Imprint of Sub-25nm Vias and Trenches in Polymers, Applied Physics Letters, 67, 3114, 10.1063/1.114851 Chou, 1997, Imprint Lithography with Sub-10nm Feature Size and High Throughput, Microelectronic Engineering, 35, 237, 10.1016/S0167-9317(96)00097-4 Choi, 2007, Analysis of Injection Molding to fabricate Patterned Media with Nano Pillars, 2030 Chu, 2007, Nanoimprint of Gratings on a Bulk Metallic Glass, Applied Physics Letters, 90, 1 Colafemina, 2010, High Fidelity and Low Cost Replication of Fresnel Lenses, 136 Corbett, 2000, Nanotechnology: International Developments and Emerging Products, CIRP Annals – Manufacturing Technology, 49, 523, 10.1016/S0007-8506(07)63454-4 Dambon, 2010, Wafer Based Glass Micro Optics Production – An Efficient Manufacturing Approach De Chiffre, 2000, Quantitative Characterisation of Surface Texture, CIRP Annals – Manufacturing Technology, 49, 635, 10.1016/S0007-8506(07)63458-1 De Chiffre, 2003, Surfaces in Precision Engineering, Microengineering and Nanotechnology, CIRP Annals – Manufacturing Technology, 52, 561, 10.1016/S0007-8506(07)60204-2 Dias, 2009, Hot Molding Process Evaluation of Microstructures Generated by Micro Machining and Micro Indentation, 122 Dimov, 2006, A Roadmapping Study in 4M Multi-Material Micro Manufacture, Proceedings of the 2nd International Conference on Multi-material Micro Manufacture, 4M, i Dornfeld, 2006, Recent Advances in Mechanical Micromachining, CIRP Annals – Manufacturing Technology, 55, 745, 10.1016/j.cirp.2006.10.006 Dubin, 2003, Electrochemical Aspects of New Materials and Technologies in Microelectronics, Microelectronic Engineering, 70, 461, 10.1016/S0167-9317(03)00420-9 Efsen, 1995, Laser Profilometry, Handbook of Non-Invasive Methods and the Skin, 3, 97 Eriksson, 2005, The Effects of Polymer Melt Rheology on the Replication of Surface Microstructures in Isothermal Moulding, Journal of Non-Newtonian Fluid Mechanics, 127, 191, 10.1016/j.jnnfm.2005.03.007 Evans, 1999, Structured”, “Textured” or “Engineered” Surfaces, CIRP Annals – Manufacturing Technology, 48, 541, 10.1016/S0007-8506(07)63233-8 Firestone, 2005, Precision Compression Molding of Glass Microlenses and Microlens Arrays – An Experimental Study, Applied Optics, 44, 6115, 10.1364/AO.44.006115 Fu, 2005, A Variotherm Mold for Micro Metal Injection Molding, Microsystem Technologies, 11, 1267, 10.1007/s00542-005-0605-6 Gadegaard, 2003, Biomimetic Polymer Nanostructures by Injection Molding, Macromolecular Material Engineering, 288, 76, 10.1002/mame.200290037 Gasparin S, Tosello G, Hansen HN (2010). Polymer Micro/Nano Structures Manufacture and Quality Control, Technical University of Denmark, DTU Mechanical Engineering, Report: pp. 1–111. Gasparin, 2011, Traceable surface characterization using replica moulding technology, 310 Gasparin, 2011, Replication Quality Control of Metal and Polymer Micro Structured Optical Surfaces Geiger, 2001, Microforming, CIRP Annals –Manufacturing Technology, 50, 445, 10.1016/S0007-8506(07)62991-6 Giselbrecht, 2006, 3D Tissue Culture Substrates Produced by Microthermoforming of Pre-Processed Polymer Films, Biomedical Microdevices, 8, 191, 10.1007/s10544-006-8174-8 Griffiths, 2007, The Effects of Tool Surface Quality in Micro-Injection Moulding, Journal of Materials Processing Technology, 189, 418, 10.1016/j.jmatprotec.2007.02.022 Griffiths, 2008, The Finite Element Analysis of Melt Flow Behavior in Micro-Injection Moulding, Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture, 222B, 1107, 10.1243/09544054JEM965 Hansen, 2005, Surface Microstructure Replication in Injection Moulding, 91 Han, 2006, Visualization Analysis of the Filling Behaviour of Melt into Microscale V-Grooves During the Filling Stage of Injection Molding, Polymer Engineering and Science, 46, 1590, 10.1002/pen.20615 Heckele, 2004, Review on Micro Molding of Thermoplastic Polymers, Journal of Micromechanics and Microengineering, 14, R1, 10.1088/0960-1317/14/3/R01 Heckele, 2008, Hot Embossing of High Aspect Ratio Sub-μm Structured Surfaces for Micro Fluidic Applications, 2514 Heilig, 2009, Micro Thermoforming of Nanostructured Polymer Films: A New Bonding Method for the Integration of Nanostructures in 3-Dimensional Cavities, 132 Henann, 2009, Metallic Glasses: Viable Tool Materials for the Production of Surface Microstructures in Amorphous Polymers by Micro-Hot-Embossing, Journal of Micromechanics and Microengineering, 19, 115030, 10.1088/0960-1317/19/11/115030 Herzig, 2005, Challenges in Micro-optics, Proceedings of the 1st International Conference on Multi-material Micro Manufacture, 4M, 47 Hieber, 1980, A Finite-Element/Finite-Difference Simulation of the Injection-Molding Filling Process, Journal of Non-Newtonian Fluid Mechanics, 7, 1, 10.1016/0377-0257(80)85012-9 Hirt, 2007, Large Area Rolling of Functional Metallic Micro Structures, Production Engineering Research Development, 1, 351, 10.1007/s11740-007-0067-z Hirt, 2008, Rolling of Functional Metallic Surface Structures, CIRP Annals – Manufacturing Technology, 57, 317, 10.1016/j.cirp.2008.03.034 Hünten, 2010, Precision Glass Molding – An Integrative Approach for the Production Of High Precision Micro Optics, Proceedings of SPIE – International Society for Optical Engineering, Conference Title Advanced Fabrication Technologies for Micro/Nano Optics and Photonics III, 7591 ISO (International Organization for Standardization) (1993) International Vocabulary of Basic and General Terms in Metrology, Switzerland. ISO 4288 (1996) Geometrical Product Specifications (GPS) – Surface texture: Profile method – Rules and procedures for the assessment of surface texture. ISO/TS 15530-3 (2004) Geometrical Product Specifications (GPS) – Coordinate Measuring Machines (CMM): Technique for Determining the Uncertainty of Measurement. Part 3. Use of Calibrated Workpieces or Standards, i–v: 1–16. Ito, 2007, Surface Replication Property and Higher-Order Structure Development of Molded Parts with Ultrastructural Patterns Prepared by Micro-Nanomolding, 2025 Ito, 2008, Structural Development and Replication Properties of Micro-Molded Parts in Injection Compression Molding, 2519 Ito, 2010, Micromolding for Quartz Glass/Polymer Composites, 2172 Jana, 1997, Non-Distructive In-Situ Replication Metallography, Journal of Materials Processing Technology, 49, 85, 10.1016/0924-0136(94)01314-Q Joint Committee for Guides in Metrology, JCGM, 100 (2008) Guide to the Expression of Uncertainty in Measurement (GUM), i–viii: 1–132. Juang, 2002, Hot Embossing in Microfabrication. Part II. Rheological Characterization and Process Analysis, Polymer Engineering and Science, 42, 551, 10.1002/pen.10971 Junkin, 2008, Adjustable Nanomanufacturing Using Template-Guided Self-Assembly, 1142 Jurischka, 2005, Polymer Technology for Disposable Microfluidics, 95 Kabanemi, 2009, Numerical Simulation of a Thermoviscoelastic Frictional Problem with Application to the Hot-Embossing Process for Manufacturing of Microcomponents, International Polymer Processing, 24, 174, 10.3139/217.2227 Kang, 2004, Replication Technology for Micro/Nano Optical Components, Japanese Journal of Applied Physics, 43, 5706, 10.1143/JJAP.43.5706 Talwar, 1998, Three-Dimensional Simulation of Plastic Injection Molding, 562 Kim, 2003, Photoplastic Near-Field Optical Probe with Sub-100nm Aperture Made by Replication from a Nanomould, Journal of Microscopy, 209, 267, 10.1046/j.1365-2818.2003.01134.x Kim, 2003, Replication Qualities and Optical Properties of UV-moulded Microlens Arrays, Journal of Physics D: Applied Physics, 36, 005 Kim, 2009, Fabrication of PDMS Micro/Nano Hybrid Surface for Increasing Hydrophobicity, Microelectronic Engineering, 86, 1375, 10.1016/j.mee.2009.02.017 Kim, 2009, Stooped Nanohairs: Geometry-Controllable, Unidirectional, Reversible, and Robust Gecko-like Dry Adhesive, Advanced Materials, 21, 2276, 10.1002/adma.200803710 Kim, 2011, Analysis of Polymer Flow in Embossing Stage During Thermal Nanoimprint Lithography, Polymer Engineering and Science, 51, 209, 10.1002/pen.21772 Kiran, 1983, Coining, CIRP Annals – Manufacturing Technology, 32, 151, 10.1016/S0007-8506(07)63380-0 Klocke, 2004, Precision Moulds for Glass Moulding of Optical Components, 209 Klocke, 2008, Finite Element Analysis of Glass Moulding, Proceedings of the Institution of Mechanical Engineers. Part B. Journal of Engineering Manufacture, 101, 10.1243/09544054JEM857 Klocke, 2009, Transregional Collaborative Research Center SFB/TR4, Process Chains for the Replication of Complex Optical Elements Solutions for Replication of Optical Glass Components Kruth, 2007, Consolidation Phenomena in Laser and Powder-Bed Based Layered Manufacturing, CIRP Annals – Manufacturing Technology, 56, 730, 10.1016/j.cirp.2007.10.004 Kumara, 2008, Write and Erase Mechanisms for Bulk Metallic Glass, Applied Physics Letters, 92, 1 Kumar, 2009, Nanomoulding with Amorphous Metals, Nature, 457, 868, 10.1038/nature07718 Kuo, 2007, An SU-8 Microlens Array Fabricated by Soft Replica Molding for Cell Counting Applications, Journal of Micromechanics and Microengineering, 17, 693, 10.1088/0960-1317/17/4/004 Landau U (2005) Metallization of Submicron Features in High-End Semiconductor Devices by Copper Electroplating, Invited Seminar, Energizer, Westlake, OH, USA, February 4, 2005. Available from: http://www.l-chem.com/publications.html (last access February 2011). Larsson, 1997, Silicon Based Replication Technology of 3D-Microstructures by Conventional CD-Injection Moulding Techniques, Transducers 97, 1415 Lee, 2003, The Effect of Wettability of Nickel Mold Insert On the Surface Quality of Molded Microlenses, Journal of The Optical Review, 10, 290, 10.1007/s10043-003-0290-6 Lee, 2004, Fabrication of Metallic Nano-Stamper and Replication of Nano-Patterned Substrate for Patterned Media, Nanotechnology, 15, 901, 10.1088/0957-4484/15/8/005 Lee, 2010, Experimental and Numerical Investigation of Injection Molding with Microrib Patterns, Polymer Engineering and Science, 1186–1198 Liu, 2010, Deformation Behavior of Solid Polymer During Hot Embossing Process, Microelectronic Engineering, 87, 200, 10.1016/j.mee.2009.07.014 Lu, 2004, Micro and Nano-Fabrication of Biodegradable Polymers for Drug Delivery, Advanced Drugs and Delivery Reviews, 56, 1621, 10.1016/j.addr.2004.05.002 Lucchetta, 2009, Investigation of the Use of LCP Additives for Microstructured Surfaces Replication, 173 MacGeough, 2001, Electroforming Process and Application to Micro/Macro Manufacturing, CIRP Annals – Manufacturing Technology, 50, 499, 10.1016/S0007-8506(07)62990-4 Madou, 2001, Design and Fabrication of Polymer Microfluidic Platform for Biomedical Applications, Biomedical Microdevices, 3, 245, 10.1023/A:1011419515576 Malek, 2005, Double Hot Embossing with Polymeric Intermediate Mould, 71 Malshe, 2010, Tip-based Nanomanufacturing by Electrical Chemical, Mechanical and Thermal Processes, CIRP Annals – Manufacturing Technology, 59, 628, 10.1016/j.cirp.2010.05.006 Mappes, 2007, Process Conditions in X-ray Lithography for the Fabrication of Devices with Sub-micron Feature Sizes, Microsystem Technologies, 13, 355, 10.1007/s00542-006-0182-3 Mappes, 2008, Submicron Polymer Structures with X-ray Lithography and Hot Embossing, Microsystem Technologies, 14, 1721, 10.1007/s00542-007-0499-6 Masuzawa, 2000, State of the Art of Micromachining, CIRP Annals – Manufacturing Technology, 49, 473, 10.1016/S0007-8506(07)63451-9 Masuku, 2002, A Finite Element Simulation of the Electroplating Process, CIRP Annals – Manufacturing Technology, 51, 169, 10.1016/S0007-8506(07)61492-9 Mazzarello, 2001, Analysis of the Microtopography of the Skin by Silicone Replicas After Repeated Exposure to Actinic Radiation at High Altitudes, Journal of the European Academy of Dermatology and Venereology, 15, 224, 10.1046/j.1468-3083.2001.00248.x McCracken, 2004, Molding of Fine Surface Features into Bulk Metallic Glass, Journal of Amorphous and Nanocrystalline Metals, 806, 399 McGeough, 2001, Electroforming Process and Application to Micro/Macro Manufacturing, CIRP Annals – Manufacturing Technology, 50, 499, 10.1016/S0007-8506(07)62990-4 Mecholsky, 1992, Fractal Analysis on Fracture Surfaces of Glass Using Replication Techniques, Journal of Non-Crystalline Solids, 146, 249, 10.1016/S0022-3093(05)80498-3 Michaeli, 2004, Injection Molding of Micro-Structured Surfaces, Society of Plastic Engineers (SPE)-62nd Annual Technical Conference (ANTEC), 752 Monkkonen, 2002, Replication of Sub-Micron Features Using Amorphous Thermoplastics, Polymer Engineering and Science, 42, 1600, 10.1002/pen.11055 Moronuki, 2007, Micro-Structure Design of the Floor to Prevent Slip, 513 Nagarajan, 2006, Biomimetic Surface Microstructures and their Replication to Polymer Materials, 2536 Narasimhan, 2004, Polymer Embossing Tools for Rapid Prototyping of Plastic Microfluidic Devices, Journal of Micromechanics and Microengineering, 14, 96, 10.1088/0960-1317/14/1/013 Nee, 1989, Non-destructive Replica Metallography, British Journal of Non-Destructive Testing, 31, 437 http://www.newport.com/Replication-Process/374840/1033/catalog.aspx (last access January 2011). Noda, 2002, Patterning Thin-Layer Material of Oriented Meso- and Macroscopic Hollow Hemispheres and Its Facile Lithography, Chemistry of Materials, 14, 2348, 10.1021/cm0116323 Oliveira, 2006, Gloss and Surface Topography of ABS: A study on the Influence of the Injection Molding Parameters, Polymer Engineering and Science, 46, 1394, 10.1002/pen.20607 Ottevaere, 2001, Microlensarrays Fabricated by Deep Lithography with Protons and their Characterization, Proceedings of SPIE – The International Society for Optical Engineering, 4455, 272 Palmer, 2000 Palanisamy, 2009, Enhancement of Surface Replication by Micro-Gas-Injection Molding, 1316 Park, 2008, A Novel Fabrication Method for Various Nickel Mold Inserts Using Anodic Aluminum Oxide for Nano Structure Molding Applications Park, 2009, Wetting Transition and Optimal Design for Microstructured Surfaces with Hydrophobic and Hydrophilic Materials, Journal of Colloid and Interface Science, 336, 298, 10.1016/j.jcis.2009.04.022 Pei, 2009, Fabrication of Biochip Based on CD/DVD Manufacturing Technology, Proceedings on SPIE, 7517, 751709, 10.1117/12.841272 Pelzer, 2005, Nanoimprint Lithography – Full Wafer Replication of Nanometer Features, Proceedings of SPIE – The International Society for Optical Engineering, 5650, 256 Pongs, 2004, Mould Making and Precision Glass Moulding Process, Euspen Vision Online Training Pranov, 2006, On the Injection Molding of Nanostructured Polymer Surfaces, Polymer Engineering and Science, 46, 160, 10.1002/pen.20459 Reimer, 1999, Progress in Graytone Lithography and Replication Techniques for Different Materials, Proceedings of the SPIE – The International Society for Optical Engineering, 3879, 98, 10.1117/12.360514 Reinecke, 2005, Hot Embossing for the Rapid Prototyping of Microstructured Polymers, 3 Rogers, 2008, A New Tool for Aligned Micro-embossing and Nano-Imprinting, 61 Rohde, 2008, A Study of Micro Replication by Compression Injection Molding Romans, 2009, Riblet Rolling, Aluminium, 7, 54 www.rubert.co.uk (last access January 2011). Sahli, 2009, Micro-injection Moulding using Si/SU-8 based Mould Inserts, Proceedings of the International Conference on Multi-material Micro Manufacture, 4M, 161 Salk, 2008, Biological Sensor for Cell Monitoring via Micro Moulding Technology, 587 Saotome, 2007, Superplastic Nanofoming of Optical Components of Pt-based Metallic Glass, Journal of alloys and compounds, 434-435:, 97, 10.1016/j.jallcom.2006.08.126 Sato, 2009, Evaluation of Replication Properties on Molded Surface by Ultrasonic Injection Molding System, 1301 Sato, 2009, Study of Application of Ultrasonic Wave to Injection Molding, Polymer Engineering and Science, 49, 768, 10.1002/pen.21268 Schift, 2000, Quantitative Analysis of the Molding of Nanostructures, Journal of Vacuum Science and Technology, 18, 3564, 10.1116/1.1324622 Schifta, 1998, Fabrication of Replicated High Precision Insert Elements for Micro-Optical Bench Arrangements, Proceedings of the SPIE – The International Society for Optical Engineering, 3513, 122, 10.1117/12.324266 Schroers, 2007, Thermoplastic Forming of Bulk Metallic Glasses – Applications for MEMS and Microstructure Fabrication, Materials science and engineering A, 449-451, 898, 10.1016/j.msea.2006.02.398 Scholz, 2009, New Process Chains for Replicating Micro and Nano Structured Surfaces with Bio-mimetic Applications, 3021 Scott, 2006, Dental Microwear Texture Analysis, Journal of Human Evolution, 51, 339, 10.1016/j.jhevol.2006.04.006 Sha, 2007, Investigation of Micro-Injection Moulding: Factors Affecting the Replication Quality, Journal of Materials Processing Technology, 183, 284, 10.1016/j.jmatprotec.2006.10.019 Shen, 2006, A Novel Fabrication Method and Optimum Tooling Design for Microlens Array, 2571 Shibata, 2006, Development of Microimprint Technology with Electroformed Nickel Mold, 168 Slavik, 2007, A Replica Molding Technique for Producing Fibrous Chitosan Scaffolds for Cartilage Engineering, Journal of Material Chemistry, 17, 4095, 10.1039/b706726g Song, 2007, Simulation Study on Stress and Deformation of Polymeric Patterns During the Demolding Process in Thermal Imprint Lithography, Journal of Vacuum Science and Technology, 46, 598 Srirojpinyo, 2005, Interfacial Effects in Replication of Nano-Scale Features, 754 Srivastava, 2010, A Thermo-Mechanically-Coupled Large-Deformation Theory for Amorphous Polymers in a Temperature Range which Spans their Glass Transition, International Journal of Plasticity, 26, 1138, 10.1016/j.ijplas.2010.01.004 Struers A/S, 2010, An advanced replica technique for the inspection of critical surfaces, 1 Su, 2004, Implementation and Analysis of Polymeric Microstructure Replication by Micro Injection Molding, Journal of Micromechanics and Microengineering, 14, 415, 10.1088/0960-1317/14/3/015 Tada, 2010, Numerical Simulation for Flow Behaviour on Micro and Nano-Molding, Plastics, Rubber and Composites, 39, 321, 10.1179/174328910X12777566997252 Tang, 2008, Utilising Electrochemical Deposition for Micro Manufacturing, Proceedings of the 4th international conference on multi-material micro manufacture, 4M, 18 Theilade, 2000, 698 Theilade URA (2004) Surface micro topography replication in injection moulding, Ph.D. thesis, Dept. Manufacturing Engineering and Management Technical University of Denmark. Theilade, 2007, Surface Microstructure Replication in Injection Molding, International Journal of Advanced Manufacture Technology, 33, 157, 10.1007/s00170-006-0732-y Thome, 2007, Economical and Ecological Benefits of Process-Integrated Surface Structuring, Key Engineering Materials, 344, 939, 10.4028/www.scientific.net/KEM.344.939 Tofteberg, 2008, Injection Molding of a Diffractive Optical Element, Polymer Engineering and Science, 48, 2134, 10.1002/pen.21154 Tosello G (2008) Precision Moulding of Polymer Micro Components–Optimization, Simulation, Tooling, Quality Control and Multi-Material Application, Ph.D. Thesis, Technical University of Denmark, Department of Mechanical Engineering: pp. 1–242. ISBN: 978-87-89502-77-9. Tosello, 2008, Micro Tools Manufacturing for Polymer Replication with High Aspect Ratio Structures Using μEDM of Silicon, Selective Etching and Electroforming, Journal of Microsystems Technology, 14, 1757, 10.1007/s00542-008-0564-9 Tosello, 2009, Characterization and Analysis of Micro Channels and Sub-Micron Surface Roughness of Injection Moulded Microfluidic Systems Using Optical Metrology, 199 Tosello, 2010, Replication and Dimensional Quality Control of Industrial Nanoscale Surfaces Using Calibrated AFM Measurements and SEM Image Processing, Annals of CIRP (International Academy for Production Engineering), 59, 563 Trumpold, 2001, Calibration Standards for Surface Topography Measuring Systems Down to Nanometer Scale, Final Report European Project Research Project SMTH-CT97-2176, 1 Tsai, 2008, Glass Material Model for the Forming Stage of the Glass Molding Process, Journal of Materials Processing Technology, 201, 751, 10.1016/j.jmatprotec.2007.11.294 Tseng, 2003, A Study of Processing Conditions on the Properties of Diffraction Optical Elements by Injection/Compression Molding Process, International Polymer Processing, 18, 194, 10.3139/217.1733 Tuominen, 2008, Direct Patterning of Micro-Optical Structures by Combined Nanoimprinting and Lithography, Proceedings of SPIE, Proceeding of the International Society Advancing Light Based Research SPIE, 6992 Ultronics, AccuTrans – Transparent Casting Silicone. http://accutransusa.com/site/ (last access February 2011). Velten, 2007, Investigations on Reel-to-Reel Hot Embossing, 271 Vollertsen, 2009, Size Effects in Manufacturing of Metallic Components, CIRP Annals – Manufacturing Technology, 58, 566, 10.1016/j.cirp.2009.09.002 Wang, 2009, Numerical Simulation Assisted Curve Compensation in Compression Molding of High Precision Aspherical Glass Lenses, Journal of Manufacturing Science and Engineering, 131, 0110141, 10.1115/1.3063652 Wang, 2009, Finite Element Simulation and Experimental Investigation of Forming Micro-Gear with Zr–Cu–Ni–Al Bulk Metallic Glass, Journal of Materials Processing Technology, 210, 684, 10.1016/j.jmatprotec.2009.12.005 Wimberger-Friedl, 1999, Injection Molding of Sub-μm Grating Optical Elements, 476 Wissmann, 2008, Replication of Micro-Optical Components and Nano-Structures for Mass Production, Proceedings of the SPIE – The International Society for Optical Engineering, 6992, 1 Wissmann, 2010, Alternative Technology for Fabrication of Nano- or Microstructured Mould Inserts Used for Optical Components, Proceedings of the SPIE – The International Society for Optical Engineering, 7590, 1 Wissmann, 2010, Alternative Fertigungsverfahren für Formeinsätze durch galvanische Replikation von mikro- und nanostrukturierten Bauteilen, (Alternative Finishing Processes for Moulds in Electrochemical Replication of Micro- and Nano-patterned Components), Galvanotechnik, 101, 418 Worgull, 2004, New Aspects of Simulation in Hot Embossing, Microsystem Technologies, 10, 432, 10.1007/s00542-004-0418-z Worgull, 2008, Hot Embossing of Microstructures: Characterization of Friction During Demolding, Microsystem Technologies, 14, 767, 10.1007/s00542-007-0492-0 Worgull, 2008, Modeling of Large Area Hot Embossing, Microsystem Technologies, 14, 1061, 10.1007/s00542-007-0493-z Worgull, 2009, Sub-μm Structured Lotus Surfaces Manufacturing, Microsystems Technology, 15, 1327, 10.1007/s00542-008-0744-7 Wu, 1998, Microstructural Study of Sanded and Polished Wood by Replication, Wood Science and Technology, 32, 247, 10.1007/BF00702893 Wu, 2005, Injection Molding of Grating Optical Elements with Microfeatures, Proceedings of the SPIE – The International Society for Optical Engineering, 5650, 293, 10.1117/12.582425 Xia, 1998, Soft Lithography, Angewandte Chemie – International Edition, 37, 550, 10.1002/(SICI)1521-3773(19980316)37:5<550::AID-ANIE550>3.0.CO;2-G Yamada, 2004, HD DVD Optical Technology Overview Yang, 2006, True 3D Numerical Simulation for Micro Injection Molding, Society of Plastic Engineers (SPE)-64th Annual Technical Conference (ANTEC), 3, 1270 Yang, 2010, Replication Characterization of Microribs Fabricated by Combining Ultraprecision Machining and Microinjection Molding, Polymer Engineering and Science, 50, 2021, 10.1002/pen.21730 Yao, 2002, Injection Molding High Aspect Ratio Microfeatures, Journal of Injection Molding Technology, 6, 11 Yi, 2006, A High Volume Precision Compression Molding Process of Glass Diffractive Optics by Use of a Micromachined Fused Silica Wafer Mold and Low Tg Optical Glass, Micromechanics and Microengineering, 16, 2000, 10.1088/0960-1317/16/10/012 Yokoi, 2006, Effects of Cavity Conditions on Transcription Moulding of Microscale Prism Patters Using Ultra-High-Speed Injection Moulding, International Polymer Processing, XXI, 473 Yokoi, 2006, Effects of Molding Conditions on Transcription Molding of Microscale Prism Patterns Using Ultra-High-Speed Injection Molding, Polymer Engineering and Science, 46, 1140, 10.1002/pen.20519 Yoon, 2004, Investigation of Tooling Surfaces on Injection Molded Nanoscale Features, NSTI Nanotechnology, 3, 460 Yoon, 2007, Micro Injection Molding of High Aspect Ratio Features with Thermoplastic Polyurethanes, 1995 Yoon, 2010, Effect of Processing Parameters, Antistiction Coatings and Polymer Type When Injection Molding Microfeatures, Polymer Engineering and Science, 412 Youn, 2007, Fabrication of Micro-Mold for Glass Embossing Using Focused Ion Beam Femto-Second Laser, Eximer Laser and Dicing Techniques, Journal of Materials Processing Technology, 187, 326, 10.1016/j.jmatprotec.2006.11.120 Yu, 2002, Experimental Investigation and Numerical Simulation of Injection Molding with Micro-Features, Polymer and Engineering Science, 42, 871, 10.1002/pen.10998 Yu, 2004, Flow and Heat Transfer Simulation of Injection Molding with Microstructures, Polymer Engineering and Science, 44, 1866, 10.1002/pen.20188 Zhao, 2007, Microstructures Fabricated by Replica Molding From Modulated Wrinkle Pattern, 489 Zhang, 2009, Creating a Library of Complex Metallic Nanostructures via Harnessing Pattern Transformation of a Single PDMS Membrane, Journal of American Chemical Society, 3, 2412 Zhou, 2011, Investigation on Shape Transferability in Ultraprecision Glass Molding Press for Microgrooves, Precision Engineering, 35, 214, 10.1016/j.precisioneng.2010.09.011