Renewable and sustainable biobased materials: An assessment on biofibers, biofilms, biopolymers and biocomposites
Tóm tắt
Từ khóa
Tài liệu tham khảo
Abu Bakar, 2019, Investigation of the mechanical properties of Napier-grass-reinforced composites for the aerospace industry: a review, 321
Adebayo, 2019, Impact of water saturation on the tensile and thermal properties of heat-treated mangrove/high-density polyethylene composites, J. Thermoplast. Compos. Mater.
Adiera, 2020, Review of chitosan-based polymers as proton exchange membranes and roles of chitosan-supported ionic liquids, Int. J. Mol. Sci., 21, 632, 10.3390/ijms21020632
Aflori, 2019, Chitosan-based bionanocomposite for transdermal therapy, Int. J. Med. Dent., 9, 40
Ahmed, 2019, Biopolymer-based biomaterials for accelerated diabetic wound healing : a critical review, Int. J. Biol. Macromol., 139, 975, 10.1016/j.ijbiomac.2019.08.007
Ahsan, 2020, Stable cellular foams and oil powders derived from methylated microcrystalline cellulose stabilized pickering emulsions, Food Hydrocolloids, 105742, 10.1016/j.foodhyd.2020.105742
Akampumuza, 2017, Review of the applications of biocomposites in the automotive industry, Polym. Compos., 38, 2553, 10.1002/pc.23847
Akhavan-Kharazian, 2019, Preparation and characterization of chitosan/gelatin/nanocrystalline cellulose/calcium peroxide films for potential wound dressing applications, Int. J. Biol. Macromol., 133, 881, 10.1016/j.ijbiomac.2019.04.159
Alves, 2019, Bacteriophage ϕIBB-PF7A loaded on sodium alginate-based films to prevent microbial meat spoilage, Int. J. Food Microbiol., 291, 121, 10.1016/j.ijfoodmicro.2018.11.026
Amatosa, 2019, Analysis of sea-water treated laminated bamboo composite for structural application, Nat. Environ. Pollut. Technol., 18, 307
Antunes, 2019, Rice husk-earth based composites: a novel bio-based panel for buildings refurbishment, Construct. Build. Mater., 221, 99, 10.1016/j.conbuildmat.2019.06.074
Arantes, 2019, Bio-based thin films of cellulose nanofibrils and magnetite for potential application in green electronics, Carbohydr. Polym., 207, 100, 10.1016/j.carbpol.2018.11.081
Arockiam, 2018, Sustainable bio composites for aircraft components, 109
Arthanarieswaran, 2015, Physico-chemical properties of alkali-treated Acacia leucophloea fibers, Int. J. Polym. Anal. Char., 20, 704, 10.1080/1023666X.2015.1081133
Arun Prakash, 2019, Fabrication and characterization of echinoidea spike particles and kenaf natural fibre-reinforced Azadirachta-Indica blended epoxy multi-hybrid bio composite, Compos. Part A Appl. Sci. Manuf., 118, 317, 10.1016/j.compositesa.2019.01.008
Azeredo, 2019, Bacterial cellulose as a raw material for food and food packaging applications, Embrapa Agroindústria Trop. em periódico indexado
Azman, 2019, Mechanical, structural, thermal and morphological properties of epoxy composites filled with chicken eggshell and inorganic CaCO3 particles, Polym. Bull., 1
Aznar-Cervantes, 2019, Effect of different cocoon stifling methods on the properties of silk fibroin biomaterials, Sci. Rep., 9, 6703, 10.1038/s41598-019-43134-5
Bachtiar, 2019, Thermal stability, fire performance, and mechanical properties of natural fibre fabric-reinforced polymer composites with different fire retardants, Polymers (Basel), 11, 699, 10.3390/polym11040699
Baghban, 2020, Natural kenaf fiber and LC3 binder for sustainable fiber-reinforced cementitious composite: a review, Appl. Sci., 10, 357, 10.3390/app10010357
Bajpai, 2012, Comparative studies of mechanical and morphological properties of polylactic acid and polypropylene based natural fiber composites, J. Reinforc. Plast. Compos., 31, 1712, 10.1177/0731684412447992
Bajwa, 2019, Characterization of bio-carbon and ligno-cellulosic fiber reinforced bio-composites with compatibilizer, Construct. Build. Mater., 204, 193, 10.1016/j.conbuildmat.2019.01.068
Balaji, 2017, Characterization of alkali treated and untreated new cellulosic fiber from Saharan aloe vera cactus leaves, Carbohydr. Polym., 174, 200, 10.1016/j.carbpol.2017.06.065
Barber, 2020, Biocomposite interference screws in anterior cruciate ligament reconstruction: osteoconductivity and degradation, Arthrosc. Sport. Med. Rehabil., 1–6
Barbhuiya, 2016, Effect of fiber length and loading on the properties of Schumannianthus dichotomus (murta) fiber–reinforced epoxy composites, Int. J. Polym. Anal. Char., 21, 221, 10.1080/1023666X.2016.1139282
Basu, 2019, Appropriate bleaching technique for coconut fiber, J. Nat. Fibers, 16, 442, 10.1080/15440478.2017.1423263
Battegazzore, 2019, Multilayer cotton fabric bio-composites based on PLA and PHB copolymer for industrial load carrying applications, Compos. B Eng., 163, 761, 10.1016/j.compositesb.2019.01.057
Beck, 2019, Antimicrobial activity of the biopolymer chitosan against Streptococcus iniae, J. Fish. Dis., 42, 371, 10.1111/jfd.12938
Beigbeder, 2019, How to manage biocomposites wastes end of life? A life cycle assessment approach (LCA) focused on polypropylene (PP)/wood flour and polylactic acid (PLA)/flax fibres biocomposites, Waste Manag., 83, 184, 10.1016/j.wasman.2018.11.012
Bharath, 2019, Failure analysis and the optimal toughness design of sheep–wool reinforced epoxy composites, 97
Bhushan, 2019, Plasma treated and untreated thermoplastic biopolymers/biocomposites in tissue engineering and biodegradable implants, 339
Biswas, 2020, Application of chitosan-clay biocomposite beads for removal of heavy metal and dye from industrial effluent, J. Compos. Sci., 4, 16, 10.3390/jcs4010016
Bora, 2019, Casein and Ag nanoparticles: synthesis, characterization, and their application in biopolymer-based bilayer film, J. Food Process. Preserv., 14062
Brindha, 2019, Effect of different retting processes on yield and quality of banana pseudostem fiber, J. Nat. Fibers, 16, 58, 10.1080/15440478.2017.1401505
Burrola-Núñez, 2019, Surface modification and performance of jute fibers as reinforcement on polymer matrix: an overview, J. Nat. Fibers, 16, 944, 10.1080/15440478.2018.1441093
Cataldi, 2020, Green biocomposites for thermoelectric wearable applications, Adv. Funct. Mater., 30, 1907301, 10.1002/adfm.201907301
Chaitanya, 2019, Recyclability analysis of PLA/Sisal fiber biocomposites, Compos. B Eng., 173, 106895, 10.1016/j.compositesb.2019.05.106
Chalermthai, 2019, Preparation and characterization of whey protein-based polymers produced from residual dairy streams, Polymers (Basel), 11, 722, 10.3390/polym11040722
Chandrasekar, 2017, A review on the characterisation of natural fibres and their composites after alkali treatment and water absorption, Plast. Rubber Compos., 46, 119, 10.1080/14658011.2017.1298550
Chatha, 2019, Environmentally responsive and anti-bugs textile finishes – recent trends, challenges, and future perspectives, Sci. Total Environ., 690, 667, 10.1016/j.scitotenv.2019.06.520
Chaudhary, 2018, Studies on mechanical and morphological characterization of developed jute/hemp/flax reinforced hybrid composites for structural applications, J. Nat. Fibers, 15, 80, 10.1080/15440478.2017.1320260
Chee, 2019, Thermomechanical and dynamic mechanical properties of bamboo/woven kenaf mat reinforced epoxy hybrid composites, Compos. B Eng., 163, 165, 10.1016/j.compositesb.2018.11.039
Chen, 2019, Classification of different animal fibers by near infrared spectroscopy and chemometric models, Microchem. J., 144, 489, 10.1016/j.microc.2018.10.011
Chen, 2020, Novel poly(vinyl alcohol)/chitosan/modified graphene oxide biocomposite for wound dressing application, Macromol. Biosci., 1900385, 10.1002/mabi.201900385
Chen, 2020, Fabrication of cellulose nanocrystal - g - poly ( acrylic acid - Co - acrylamide ) aerogels for efficient Pb ( II ) removal, Polymers (Basel), 12, 333, 10.3390/polym12020333
Cheng, 2019, Effect of different additives in diets on secondary structure, thermal and mechanical properties of silkworm silk, Materials (Basel), 12, 14, 10.3390/ma12010014
Cheung, 2009, Natural fibre-reinforced composites for bioengineering and environmental engineering applications, Compos. B Eng., 40, 655, 10.1016/j.compositesb.2009.04.014
Coelho de Carvalho Benini, 2017, Characterization of a new lignocellulosic fiber from Brazil: imperata brasiliensis (Brazilian satintail) as an alternative source for nanocellulose extraction, J. Nat. Fibers, 14, 112, 10.1080/15440478.2016.1167647
Costa, 2018, Fibrous protein-based biomaterials (silk, keratin, elastin, and resilin proteins) for tissue regeneration and repair, 175
Costa, 2020, Fibers of cellulose sugarcane bagasse with bromelain enzyme immobilized to application in dressing, SN Appl. Sci., 2, 285, 10.1007/s42452-020-2100-1
Cunha, 2010, Turning polysaccharides into hydrophobic materials : a critical review . Part 2 . Hemicelluloses , chitin/chitosan , starch , pectin and alginates, Cellulose, 17, 1045, 10.1007/s10570-010-9435-5
Cunha, 2006, Sustainable materials in automotive applications, Plast. Rubber Compos., 35, 233, 10.1179/174328906X146487
Da Silva, 2019, Physical properties of films based on pectin and babassu coconut mesocarp, Int. J. Biol. Macromol., 130, 419, 10.1016/j.ijbiomac.2019.02.151
Das, 2019, Naturally-occurring bromophenol to develop fi re retardant gluten biopolymers, J. Clean. Prod., 243, 118552, 10.1016/j.jclepro.2019.118552
Das, 2019, The development of fire and microbe resistant sustainable gluten plastics, J. Clean. Prod., 222, 163, 10.1016/j.jclepro.2019.03.032
Deb, 2019, Pharmaceutical and biomedical applications of polymers, 203
Díez-Pascual, 2019, Poly(propylene fumarate)-based biocomposites for tissue engineering applications, 417
Dobosz, 2020, Influence of xanthan gum on the short- and long-term retrogradation of potato starches of various amylose content, Food Hydrocolloids, 102, 105618, 10.1016/j.foodhyd.2019.105618
Dominici, 2019, Bio-polyethylene-based composites reinforced with alkali and Palmitoyl chloride-treated coffee Silverskin, Molecules, 24, 3113, 10.3390/molecules24173113
Dorez, 2014, Effect of cellulose , hemicellulose and lignin contents on pyrolysis and combustion of natural fibers, J. Anal. Appl. Pyrolysis, 107, 323, 10.1016/j.jaap.2014.03.017
Dumont, 2016, Glycol chitosan/nanohydroxyapatite biocomposites for potential bone tissue engineering and regenerative medicine, Int. J. Biol. Macromol., 93, 1465, 10.1016/j.ijbiomac.2016.04.030
El-Hadi, 2019, Miscibility of crystalline/amorphous/crystalline biopolymer blends from PLLA/PDLLA/PHB with additives, Polym. Plast. Technol. Eng., 58, 31
El-Shafei, 2019, Dual functional jute fabric biocomposite with chitosan and phosphorylated nano-cellulose (antimicrobial and thermal stability), Int. J. Biol. Macromol., 124, 733, 10.1016/j.ijbiomac.2018.11.137
Estevinho, 2018, Application of biopolymers in microencapsulation processes, 191
Ezati, 2020, pH-responsive chitosan-based film incorporated with alizarin for intelligent packaging applications, Food Hydrocolloids, 102, 105629, 10.1016/j.foodhyd.2019.105629
Fan, 2019, Effect of high pressure treatment on properties and nano–Ag migration of PLA-based food packaging film, Polym. Test., 76, 73, 10.1016/j.polymertesting.2019.03.005
Fang, 2020, Bioconversion of agricultural waste into poly- c -glutamic acid in solid-state bioreactors at different scales, Waste Manag., 102, 939, 10.1016/j.wasman.2019.12.016
Farokhi, 2019, Alginate based scaffolds for cartilage tissue Engineering : a review, Int. J. Polym. Mater. Polym. Biomater., 69, 230, 10.1080/00914037.2018.1562924
Faruk, 2012, Biocomposites reinforced with natural fibers: 2000-2010, Prog. Polym. Sci., 37, 1552, 10.1016/j.progpolymsci.2012.04.003
Favero, 2019, Renewable polyol obtained by microwave-assisted alcoholysis of epoxidized soybean oil: preparation, thermal properties and relaxation process, J. Mol. Liq., 285, 136, 10.1016/j.molliq.2019.04.078
Fazeli, 2019, Improvement in adhesion of cellulose fibers to the thermoplastic starch matrix by plasma treatment modification, Compos. B Eng., 163, 207, 10.1016/j.compositesb.2018.11.048
Fekete, 2019, Improving physical properties and retrogradation of thermoplastic starch by incorporating agar, Int. J. Biol. Macromol., 136, 1026, 10.1016/j.ijbiomac.2019.06.109
Ferrández-Montero, 2019, Development of biocompatible and fully bioabsorbable PLA/Mg films for tissue regeneration applications, Acta Biomater., 10.1016/j.actbio.2019.05.026
Ferreira, 2019, Surface modification of natural fibers in polymer composites, 3
Finkenstadt, 2007, Evaluation of poly ( lactic acid ) and sugar beet pulp green composites, J. Polym. Environ., 15, 1, 10.1007/s10924-006-0038-z
Fombuena, 2019, Maleinized linseed oil as epoxy resin hardener for composites with high bio content obtained from linen byproducts, Polymers (Basel), 11, 301, 10.3390/polym11020301
Fonseca, 2019, Improving cellulose nanofibrillation of non-wood fiber using alkaline and bleaching pre-treatments, Ind. Crop. Prod., 131, 203, 10.1016/j.indcrop.2019.01.046
Fortunati, 2012, Multifunctional bionanocomposite films of poly(lactic acid), cellulose nanocrystals and silver nanoparticles, Carbohydr. Polym., 87, 1596, 10.1016/j.carbpol.2011.09.066
Francis, 2019, A new strategy for developing chitosan conversion coating on magnesium substrates for orthopedic implants, Appl. Surf. Sci., 466, 854, 10.1016/j.apsusc.2018.10.002
Ganguly, 2020, Peptides as biopolymers—past, present, and future, 87
Ganapathy, 2019, Characterization of raw and alkali treated new natural cellulosic fibres extracted from the aerial roots of banyan tree, Int. J. Biol. Macromol., 138, 573, 10.1016/j.ijbiomac.2019.07.136
Gáspár, 2005, Reducing water absorption in compostable starch-based plastics, Polym. Degrad. Stabil., 90, 563, 10.1016/j.polymdegradstab.2005.03.012
Gavin, 2019, The role of plasticizers during protein thermoplastic foaming, J. Appl. Polym. Sci., 136, 47781, 10.1002/app.47781
Gavril, 2019, Influence of medicinal and aromatic plants into risk assessment of a new bioactive packaging based on polylactic acid (PLA), Food Chem. Toxicol., 132, 110662, 10.1016/j.fct.2019.110662
Geyer, 2017, Production, use, and fate of all plastics ever made, Sci. Adv., 3, 1700782, 10.1126/sciadv.1700782
González-López, 2019, Effect of maleated PLA on the properties of rotomolded PLA-agave fiber biocomposites, J. Polym. Environ., 27, 61, 10.1007/s10924-018-1308-2
Gopi, 2019, General scenarios of cellulose and its use in the biomedical field, Mater. Today Chem., 13, 59, 10.1016/j.mtchem.2019.04.012
Gopi, 2019, Fabrication of cellulose acetate/chitosan blend films as efficient adsorbent for anionic water pollutants, Polym. Bull., 76, 1557, 10.1007/s00289-018-2467-y
Gurarslan, 2019, Silver nanowire coated knitted wool fabrics for wearable electronic applications, J. Eng. Fiber. Fabr., 14
Gurukarthik Babu, 2019, Study on characterization and physicochemical properties of new natural fiber from Phaseolus vulgaris, J. Nat. Fibers, 16, 1035, 10.1080/15440478.2018.1448318
Gurunathan, 2015, A review of the recent developments in biocomposites based on natural fibres and their application perspectives, Compos. Part A Appl. Sci. Manuf., 77, 1, 10.1016/j.compositesa.2015.06.007
Hendaw, 2017, Stifling cocoons silkworms using butane gas mechanical dryer, J. Soil Sci. Agric. Eng., 8, 149
Heras-mozos, 2019, International Journal of Food Microbiology Development and optimization of antifungal packaging for sliced pan loaf based on garlic as active agent and bread aroma as aroma corrector, Int. J. Food Microbiol., 290, 42, 10.1016/j.ijfoodmicro.2018.09.024
Hidalgo-Salazar, 2019, Mechanical, thermal, viscoelastic performance and product application of PP- rice husk Colombian biocomposites, Compos. B Eng., 176, 107135, 10.1016/j.compositesb.2019.107135
Hijazi, 2019, Biocomposite films based on poly(lactic acid) and chitosan nanoparticles: elaboration, microstructural and thermal characterization, Polym. Eng. Sci., 59, E350, 10.1002/pen.24983
Hirvikorpi, 2011, Thin Al2O3 barrier coatings onto temperature-sensitive packaging materials by atomic layer deposition, Surf. Coating. Technol., 205, 5088, 10.1016/j.surfcoat.2011.05.017
Hsini, 2020, Elaboration of novel polyaniline @ Almond shell biocomposite for effective removal of hexavalent chromium ions and Orange G dye from aqueous solutions, Environ. Sci. Pollut. Res., 1
Hu, 2019, Preparation of natural amphoteric silk nanofibers by acid hydrolysis, J. Mater. Chem. B, 7, 1450, 10.1039/C8TB03005G
Huang, 2020, 3-D printed porous cellulose acetate tissue scaffolds for additive manufacturing, Addit. Manuf., 31, 100927
Huang, 2020, Facile preparation of a strong chitosan-silk biocomposite film, Carbohydr. Polym., 229, 115515, 10.1016/j.carbpol.2019.115515
Huda, 2009, Feather fiber reinforced light-weight composites with good acoustic properties, J. Polym. Environ., 17, 131, 10.1007/s10924-009-0130-2
Idicula, 2006, Thermophysical properties of natural fibre reinforced polyester composites, Compos. Sci. Technol., 66, 2719, 10.1016/j.compscitech.2006.03.007
Ilyas, 2019, Sugar palm (Arenga pinnata (Wurmb.) Merr) cellulosic fibre hierarchy: a comprehensive approach from macro to nano scale, J. Mater. Res. Technol., 8, 2753, 10.1016/j.jmrt.2019.04.011
Indran, 2015, Characterization of new natural cellulosic fiber from Cissus quadrangularis stem, Carbohydr. Polym., 117, 392, 10.1016/j.carbpol.2014.09.072
Jebadurai, 2019, Comprehensive characterization of natural cellulosic fi ber from Coccinia grandis stem, Carbohydr. Polym., 207, 675, 10.1016/j.carbpol.2018.12.027
Jena, 2019, Study of tribo-performance and application of polymer composite, 65
Jia, 2019, Moisture sensitive smart yarns and textiles from self-balanced silk fiber muscles, Adv. Funct. Mater., 29, 1808241, 10.1002/adfm.201808241
Jia, 2020, High thermal conductive shape-stabilized phase change materials of polyethylene glycol/boron nitride@chitosan composites for thermal energy storage, Compos. Part A, 129, 105710, 10.1016/j.compositesa.2019.105710
Jung, 2019, Mechanical properties and biodegradability of enzyme-retted kenaf fiber composites, Textil. Res. J., 89, 1782, 10.1177/0040517518779996
Kabir, 2012, Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview, Compos. B Eng., 43, 2883, 10.1016/j.compositesb.2012.04.053
Kakati, 2019, Alkalinization and graft copolymerization of pineapple leaf fiber cellulose and evaluation of physic-chemical properties, Polym. Compos., 40, 1395, 10.1002/pc.24873
Karakoti, 2018, Characterization of microfiber isolated from Hibiscus sabdariffa var. altissima fiber by steam explosion, J. Nat. Fibers, 1
Karakurt, 2019, Antibacterial activity and cytotoxicity of immobilized glucosamine/chondroitin sulfate on polylactic acid films, Polymers (Basel), 11, 1186, 10.3390/polym11071186
Kathirselvam, 2019, Isolation and characterization of cellulose fibers from Thespesia populnea barks: a study on physicochemical and structural properties, Int. J. Biol. Macromol., 129, 396, 10.1016/j.ijbiomac.2019.02.044
Kathirselvam, 2019, Assessment of cellulose in bark fibers of Thespesia populnea: influence of stem maturity on fiber characterization, Carbohydr. Polym., 212, 439, 10.1016/j.carbpol.2019.02.072
Kato, 1999, Surface oxidation of cellulose fibers by Vacuum ultraviolet irradiation, J. Polym. Sci. Part A Polym. Chem., 37, 357, 10.1002/(SICI)1099-0518(19990201)37:3<357::AID-POLA13>3.0.CO;2-2
Kengkhetkit, 2012, Utilisation of pineapple leaf waste for plastic reinforcement: 1. A novel extraction method for short pineapple leaf fiber, Ind. Crop. Prod., 40, 55, 10.1016/j.indcrop.2012.02.037
Khalili, 2019, Development of fire retardancy of natural fiber composite encouraged by a synergy between zinc borate and ammonium polyphosphate, Compos. B Eng., 159, 165, 10.1016/j.compositesb.2018.09.036
Kluge, 2008, Spider silks and their applications, Trends Biotechnol., 26, 244, 10.1016/j.tibtech.2008.02.006
Koh, 2015, Structures , mechanical properties and applications of silk fibroin materials, Prog. Polym. Sci., 46, 86, 10.1016/j.progpolymsci.2015.02.001
Kommula, 2013, Physico-chemical, tensile, and thermal characterization of napier grass (native african) fiber strands, Int. J. Polym. Anal. Char., 18, 303, 10.1080/1023666X.2013.784935
Kommula, 2016, Extraction, modification, and characterization of natural ligno-cellulosic fiber strands from napier grass, Int. J. Polym. Anal. Char., 21, 18, 10.1080/1023666X.2015.1089650
Koradiya, 2010, The preparation and physicochemical study of glass, jute and hybrid glass-jute bisphenol-C-based epoxy resin composites, Polym. Plast. Technol. Eng., 49, 1445, 10.1080/03602559.2010.496409
Kraśniewsk, 2020, Biopolymers - based materials containing silver nanoparticles as active packaging for food applications – a review, Int. J. Mol. Sci., 21, 698, 10.3390/ijms21030698
Krishnan, 2018, Tensile, flexural, impact, and hardness properties of alkaline-treated Sunnhemp fiber reinforced polyester composites, J. Nat. Fibers, 1
Kumaar, 2019, Physicochemical properties of new cellulosic fiber extracted from Carica papaya bark, J. Nat. Fibers, 16, 175, 10.1080/15440478.2017.1410514
Kumar, 2019, Industrial applications of natural fibre-reinforced polymer composites–challenges and opportunities, Int. J. Sustain. Eng., 12, 212, 10.1080/19397038.2018.1538267
Kumar, 2019, Nanotechnology-based biomaterials for orthopaedic applications: recent advances and future prospects, Mater. Sci. Eng. C, 106, 110154, 10.1016/j.msec.2019.110154
Labidi, 2019, Alfa fiber/polypropylene composites: influence of fiber extraction method and chemical treatments, J. Appl. Polym. Sci., 136, 47392, 10.1002/app.47392
Laranjeira, 2006, Influence of fiber orientation on the mechanical properties of polyester/jute composites, J. Reinforc. Plast. Compos., 25, 1269, 10.1177/0731684406060577
Lavery, 2019, Biofilm and diabetic foot ulcer healing: all hat and no cattle, Ann. Transl. Med., 7, 10.21037/atm.2019.03.33
Lemeune, 2004, Effects of ozone and chlorine dioxide on the chemical properties of cellulose fibers, J. Appl. Polym. Sci., 93, 1219, 10.1002/app.20509
Li, 2019, Preparation of novel mcl-PHA by green synthesis: influence of active small molecule via esterification effect on side chain, Mater. Res. Express, 6
Li, 2019, Fabrication and performance of wool keratin–functionalized graphene oxide composite fibers, Mater. Today Sustain., 3, 100006, 10.1016/j.mtsust.2019.100006
Lila, 2019, Accelerated thermal ageing behaviour of bagasse fibers reinforced Poly (Lactic Acid) based biocomposites, Compos. B Eng., 156, 121, 10.1016/j.compositesb.2018.08.068
Liu, 2019, Preparation of fast-degrading poly(lactic acid)/soy protein concentrate biocomposite foams via supercritical CO2 foaming, Polym. Eng. Sci., 59, 1753, 10.1002/pen.25175
Liu, 2019, Properties of natural fiber-reinforced biobased thermoset biocomposites: effects of fiber type and resin composition, Compos. B Eng., 171, 87, 10.1016/j.compositesb.2019.04.048
Liu, 2019, Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites, Tribol. Int., 131, 398, 10.1016/j.triboint.2018.11.004
Luzi, 2019, Natural fiber biodegradable composites and nanocomposites: a biomedical application, 179
Maache, 2017, Characterization of a novel natural cellulosic fiber from Juncus effusus, L. Carbohydr. Polym., 171, 163, 10.1016/j.carbpol.2017.04.096
Macha, 2019, Development of antimicrobial composite coatings for drug release in dental, orthopaedic and neural prostheses applications, SN Appl. Sci., 1, 68, 10.1007/s42452-018-0064-1
Machado, 2020, Biopolymers from lignocellulosic biomass: feedstocks, production processes, and applications, 125
Madhu, 2019, Characterization of cellulosic fibre from Phoenix pusilla leaves as potential reinforcement for polymeric composites, J. Mater. Res. Technol., 8, 2597, 10.1016/j.jmrt.2019.03.006
Mangaraj, 2019, Development and characterization of commercial biodegradable film from PLA and corn starch for fresh produce packaging, J. Packag. Technol. Res., 3, 127, 10.1007/s41783-019-00055-y
Mangaraj, 2019, Application of biodegradable polymers in food packaging industry: a comprehensive review, J. Packag. Technol. Res., 3, 77, 10.1007/s41783-018-0049-y
Manimaran, 2018, Study on characterization of Furcraea foetida new natural fi ber as composite reinforcement for lightweight applications, Carbohydr. Polym., 181, 650, 10.1016/j.carbpol.2017.11.099
Manimaran, 2019, Investigation of physico chemical properties and characterization of new natural cellulosic fibers from the bark of Ficus Racemosa, J. Nat. Fibers, 1
Manimaran, 2019, Characterization of new cellulosic fiber: Dracaena reflexa as a reinforcement for polymer composite structures, J. Mater. Res. Technol., 8, 1952, 10.1016/j.jmrt.2018.12.015
Masood, 2019, High capacity natural fiber coated conductive and electroactive composite papers electrode for energy storage applications, J. Appl. Polym. Sci., 136, 47282, 10.1002/app.47282
Mazerolles, 2019, Development of co-continuous morphology in blends of thermoplastic starch and low-density polyethylene, Carbohydr. Polym., 206, 757, 10.1016/j.carbpol.2018.11.038
Mazzanti, 2019, Reinforcing mechanisms of natural fibers in green composites: role of fibers morphology in a PLA/hemp model system, Compos. Sci. Technol., 180, 51, 10.1016/j.compscitech.2019.05.015
Mehta, 2019, Ionic liquid stabilized gelatin–lignin films: a potential UV-shielding material with excellent mechanical and antimicrobial properties, Chem. Eur J., 25, 1269, 10.1002/chem.201803763
Mei, 2019, Influences of tantalum pentoxide and surface coarsening on surface roughness, hydrophilicity, surface energy, protein adsorption and cell responses to PEEK based biocomposite, Colloids Surf. B Biointerfaces, 174, 207, 10.1016/j.colsurfb.2018.10.081
Miękoś, 2019, Application of industrial and biopolymers waste to stabilise the subsoil of road surfaces, Road Mater. Pavement Des., 20, 440, 10.1080/14680629.2017.1389766
Miyashiro, 2020, A review of applications using mixed materials of cellulose, nanocellulose and carbon nanotubes, Nanomaterials, 10, 186, 10.3390/nano10020186
Mohammad, 2019, Starch-based nanocomposites: types and industrial applications, 157
Mohammad, 2019, Thermo-mechanical , morphological and water absorption properties of thermoplastic starch/cellulose composite foams reinforced with PLA, Cellulose, 26, 4463, 10.1007/s10570-019-02393-1
Mohammed, 2015, A review on natural fiber reinforced polymer composite and its applications, Int. J. Polym. Sci., 10.1155/2015/243947
Mohan, 2019, Compressive characteristics of unmodified and nanoclay treated banana fiber reinforced epoxy composite cylinders, Compos. B Eng., 169, 118, 10.1016/j.compositesb.2019.03.071
Mohan, 2019, Tribological properties of nanoclay-infused banana fiber reinforced epoxy composites, J. Tribol., 141
Mohd Aris, 2019, Barrier properties and abrasion resistance of biopolymer-based coatings on biodegradable poly(lactic acid) films, Polym. Eng. Sci., 59, 1874, 10.1002/pen.25187
Moqeet Hai, 2019, Characterization and antibacterial property of Kapok fibers treated with chitosan/AgCl–TiO 2 colloid, J. Text. Inst., 110, 100
Mukheem, 2020, Fabrication of biopolymer polyhydroxyalkanoate/chitosan and 2D molybdenum disulfide – doped scaffolds for antibacterial and biomedical applications, Appl. Microbiol. Biotechnol., 1
Muneer, 2019, Impact of pH modification on protein polymerization and structure – function relationships in potato protein and wheat gluten composites, Int. J. Mol. Sci., 20, 58, 10.3390/ijms20010058
Murawski, 2019, Synthesis of bio-based polymer composites: fabrication, fillers, properties, and challenges, 29
Muthuraj, 2017, Biocomposite consisting of miscanthus fiber and biodegradable binary blend matrix: compatibilization and performance evaluation, RSC Adv., 7, 27538, 10.1039/C6RA27987B
Muthuraj, 2017, Reactive compatibilization and performance evaluation of miscanthus biofiber reinforced poly(hydroxybutyrate-co-hydroxyvalerate) biocomposites, J. Appl. Polym. Sci., 134, 10.1002/app.45448
Muthuraj, 2017, Biodegradable biocomposites from poly(butylene adipate-co-terephthalate) and miscanthus: preparation, compatibilization, and performance evaluation, J. Appl. Polym. Sci., 134, 45448, 10.1002/app.45448
Muthuraj, 2019, Sustainable thermal insulation biocomposites from rice husk, wheat husk, wood fibers and textile waste fibers: elaboration and performances evaluation, Ind. Crop. Prod., 135, 238, 10.1016/j.indcrop.2019.04.053
Mădălina, 2019, Natural fibers in beverages packaging, 409
Nader, 2019, Spider silk fibers: synthesis, characterization, and related biomedical applications, 289
Nagalakshmaiah, 2019, Biocomposites: present trends and challenges for the future, 197
NagarajaGanesh, 2016, Physico-chemical, thermal, and flexural characterization of Cocos nucifera fibers, Int. J. Polym. Anal. Char., 21, 244, 10.1080/1023666X.2016.1139359
Nagarajan, 2019, Extraction of cellulose nanofibers from cocos nucifera var aurantiaca peduncle by ball milling combined with chemical treatment, Carbohydr. Polym., 212, 312, 10.1016/j.carbpol.2019.02.063
Nagarajan, 2019, Overview of protein-based biopolymers for biomedical application, Macromol. Chem. Phys., 10.1002/macp.201900126
Navaneethakrishnan, 2019, Structural analysis of natural fiber reinforced polymer matrix composite, Mater. Today Proc.
Naveen, 2019, Improved interlaminar shear behaviour of a new hybrid kevlar/cocos nucifera sheath composites with graphene nanoplatelets modified epoxy matrix, Fibers Polym., 20, 1749, 10.1007/s12221-019-3127-z
Nevoralová, 2019, Controlled biodegradability of functionalized thermoplastic starch based materials, Polym. Degrad. Stabil., 170, 108995, 10.1016/j.polymdegradstab.2019.108995
Ngaowthong, 2019, Recycling of sisal fiber reinforced polypropylene and polylactic acid composites: thermo-mechanical properties, morphology, and water absorption behavior, Waste Manag., 97, 71, 10.1016/j.wasman.2019.07.038
Oksman, 2003, Natural fibres as reinforcement in polylactic acid (PLA) composites, Compos. Sci. Technol., 63, 1317, 10.1016/S0266-3538(03)00103-9
Oudrhiri Hassani, 2019, Effects of corona discharge treatment on surface and mechanical properties of Aloe Vera fibers, Mater. Today Proc.
Payal, 2019
Peng, 2019, Synthesis, characterization, and applications of hemicelluloses based eco-friendly polymer composites, 1267
Pilar, 2019, Nanotechnology in food packaging, 205
Pranata, 2019, Egg white protein film production through extrusion and calendering processes and its suitability for food packaging applications, Food Bioprocess Technol., 12, 714, 10.1007/s11947-019-2248-0
Priyadarsini, 2019, Sustainable biocomposite its manufaturing processes and applications. Egypt, J. Chem., 62, 751
Putri, 2020, Characterization of polylactic acid/halloysite nanotubes bionanocomposite fi lms for food packaging, Food Packag. Shelf Life, 23, 100450, 10.1016/j.fpsl.2019.100450
Rabe, 2019, Natural keratin and coconut fibres from industrial wastes in flame retarded thermoplastic starch biocomposites, Materials (Basel), 12, 344, 10.3390/ma12030344
Ramamoorthy, 2015, A review of natural fibers used in biocomposites: plant, animal and regenerated cellulose fibers, Polym. Rev., 55, 107, 10.1080/15583724.2014.971124
Ramanaiah, 2011, Thermal and mechanical properties of sansevieria green fiber reinforcement, Iternational J. Polym. Anal. Charact., 16, 602, 10.1080/1023666X.2011.622358
Rao, 2007, Extraction and tensile properties of natural fibers: vakka, date and bamboo, Compos. Struct., 77, 288, 10.1016/j.compstruct.2005.07.023
Ravindra, 2019, Cross-linking of polyvinyl alcohol/starch blends by epoxy silane for improvement in thermal and mechanical properties, BioResources, 14, 3833, 10.15376/biores.14.2.3833-3843
Ray, 2002, Study of the thermal behavior of alkali-treated jute fibers, J. Appl. Polym. Sci., 85, 2594, 10.1002/app.10934
Reddy, 2007, Structure and properties of chicken feather barbs as natural protein fibers, J. Polym. Environ., 15, 81, 10.1007/s10924-007-0054-7
Righetti, 2019, Thermal, mechanical, and rheological properties of biocomposites made of poly(Lactic acid) and potato pulp powder, Int. J. Mol. Sci., 20, 675, 10.3390/ijms20030675
Rizal, 2019, Tailoring the effective properties of Typha fiber reinforced polymer composite via alkali treatment, BioResources, 14, 5630, 10.15376/biores.14.3.5630-5645
Rostami, 2019, Application of different biopolymers for nanoencapsulation of antioxidants via electrohydrodynamic processes, Food Hydrocolloids, 97, 105170, 10.1016/j.foodhyd.2019.06.015
Rout, 2019, Nanosilver coated coir based dielectric materials with high K and low df for embedded capacitors and insulating material applications-A greener approach, ACS Sustain. Chem. Eng., 7, 3824, 10.1021/acssuschemeng.8b04465
Ruiz, 2019, Preparation and characterization of: Nephila clavipes tubuliform silk gut, Soft Matter, 15, 2960, 10.1039/C9SM00212J
Rwahwire, 2019, Green thermoset reinforced biocomposites, 61
Sabbah, 2019, Development and properties of new chitosan-based films plasticized with spermidine and/or glycerol, Food Hydrocolloids, 87, 245, 10.1016/j.foodhyd.2018.08.008
Sadasivuni, 2019, Recent advances in mechanical properties of biopolymer composites: a review, Polym. Compos.
Sadeghi, 2019, Recycling chicken feathers to produce adsorbent porous keratin-based sponge, Int. J. Environ. Sci. Technol., 16, 1119, 10.1007/s13762-018-1669-z
Sadrmanesh, 2019, Developing a decision making model to identify the most influential parameters affecting mechanical extraction of bast fibers, J. Clean. Prod., 238, 117891, 10.1016/j.jclepro.2019.117891
Saghrouni, 2020, Composites based on Juncus maritimus fibers for building insulation, Cement Concr. Compos., 106, 103474, 10.1016/j.cemconcomp.2019.103474
Sanchez-Garcia, 2010, Novel clay-based nanobiocomposites of biopolyesters with synergistic barrier to UV light, gas, and vapour, J. Appl. Polym. Sci., 118, 188, 10.1002/app.31986
Sanjay, 2018, Characterization and properties of natural fiber polymer composites: a comprehensive review, J. Clean. Prod., 172, 566, 10.1016/j.jclepro.2017.10.101
Sanjay, 2019, A comprehensive review of techniques for natural fibers as reinforcement in composites: preparation, processing and characterization, Carbohydr. Polym., 207, 108, 10.1016/j.carbpol.2018.11.083
Saravanakumar, 2014, Effect of chemical treatments on physicochemical properties of prosopis juliflora fibers, Int. J. Polym. Anal. Char., 19, 383, 10.1080/1023666X.2014.903585
Sari, 2019, Synthesis and properties of pandanwangi fiber reinforced polyethylene composites: evaluation of dicumyl peroxide (DCP) effect, Compos. Commun., 15, 53, 10.1016/j.coco.2019.06.007
Schmidt, 2020, Internal structure of methylcellulose fibrils, Macromolecules, 53, 398, 10.1021/acs.macromol.9b01773
Segal, 1959, An empirical method for estimating the degree of crystallinity of native cellulose using the X-ray diffractometer, Textil. Res. J., 29, 786, 10.1177/004051755902901003
Şeker, 2020, Materials Science & Engineering C Macroporous elastic cryogels based on platelet lysate and oxidized dextran as tissue engineering sca ff old : in vitro and in vivo evaluations, Mater. Sci. Eng. C, 110, 110703, 10.1016/j.msec.2020.110703
Senthamaraikannan, 2018, Characterization of raw and alkali treated new natural cellulosic fi ber from Coccinia grandis, L. Carbohydr. Polym., 186, 332, 10.1016/j.carbpol.2018.01.072
Sessini, 2019, Thermal and composting degradation of EVA/Thermoplastic starch blends and their nanocomposites, Polym. Degrad. Stabil., 159, 184, 10.1016/j.polymdegradstab.2018.11.025
Shabbir, 2020, Antibacterial functionalization and simultaneous coloration of wool fiber with the application of plant-based dyes, J. Nat. Fibers, 17, 437, 10.1080/15440478.2018.1500336
Shahzad, 2012, Hemp fiber and its composites–a review, J. Compos. Mater., 46, 973, 10.1177/0021998311413623
Shankar, 2019, Effect of melanin nanoparticles on the mechanical, water vapor barrier, and antioxidant properties of gelatin-based films for food packaging application, Food Packag. Shelf Life, 21, 100363, 10.1016/j.fpsl.2019.100363
Sharif, 2019, Polylactic acid (PLA)-Based nanocomposites: processing and properties, 233
Sharma, 2019, Commercial application of cellulose nano-composites – a review, Biotechnol. Reports e00316, 10.1016/j.btre.2019.e00316
Shera, 2019, Silk and silk fibroin-based biopolymeric composites and their biomedical applications, 339
Shibata, 2019, Biobased polymer networks by the thiol-ene photopolymerization of allylated p-coumaric and caffeic acids, Polym. J., 51, 461, 10.1038/s41428-018-0165-0
Silva, 2019, Sugarcane bagasse fibers treated and Untreated : performance as reinforcement in phenolic-type matrices based on lignosulfonates, Waste and Biomass Valorization, 10, 3515, 10.1007/s12649-018-0365-z
Sivasankarapillai, 2019, Potential of organosolv lignin based materials in pressure sensitive adhesive applications, ACS Sustain. Chem. Eng., 7, 12817, 10.1021/acssuschemeng.9b01670
Souzandeh, 2019, Towards sustainable and multifunctional air- Filters : a review on biopolymer-based filtration materials, Polym. Rev., 59, 651, 10.1080/15583724.2019.1599391
Stafford, 2019, Viewpoint – ocean plastic pollution: a convenient but distracting truth?, Mar. Pol., 103, 187, 10.1016/j.marpol.2019.02.003
Stevens, 2010
Subramanian, 2019, Characterization of natural cellulosic fiber from Cereus Hildmannianus, J. Nat. Fibers, 1
Sun, 2019, Biodegradable copolymer-based composites made from straw fiber for biocomposite flowerpots application, Compos. B Eng., 165, 193, 10.1016/j.compositesb.2018.11.121
Suwanprateep, 2019, Structure and thermal properties of rice starch-based film blended with mesocarp cellulose fiber, Mater. Today Proc., 17, 2039, 10.1016/j.matpr.2019.06.252
Taimur-Al-Mobarak, 2018, Effect of chemical modifications on surface morphological, structural, mechanical, and thermal properties of sponge-gourd natural fiber, Fibers Polym., 19, 31, 10.1007/s12221-018-7199-3
Teixeira, 2019, Impact of content and length of curauá fibers on mechanical behavior of extruded cementitious composites: analysis of variance, Cement Concr. Compos., 102, 134, 10.1016/j.cemconcomp.2019.04.022
Teklu, 2019, Effect of surface modification of sisal fibers on water absorption and mechanical properties of polyaniline composite, Polym. Compos., 40, E46, 10.1002/pc.24462
Tengsuthiwat, 2019, Thermomechanical, water absorption, ultraviolet resistance and laser-assisted electroless plating behavior of Cu 2 O and melamine–formaldehyde-coated sisal fiber-modified poly(lactic acid) composites, Polym. Compos., 10.1002/pc.25182
Thi khanah ly, 2019, Bioactive antibacterial modification of orthodontic microimplants using chitosan biopolymer, Macromol. Res., 27, 504, 10.1007/s13233-019-7069-5
Torres, 2019, Preparation and characterization of a novel starch–chestnut husk biocomposite, SN Appl. Sci., 1, 1158, 10.1007/s42452-019-1204-y
Tous, 2019, Sustainable hot-melt adhesives based on soybean protein isolate and polycaprolactone, Ind. Crop. Prod., 135, 153, 10.1016/j.indcrop.2019.04.043
Tozar, 2019, Optimization of the electrophoretic deposition parameters for biocomposite hydroxyapatite/chitosan/collagen/h-BN coatings on Ti6Al4V biomedical implants, Metall. Mater. Trans., 50, 1009, 10.1007/s11661-018-5010-8
Tuan, 2019, Preparation of silk resins by hot pressing Bombyx mori and Eri silk powders, Mater. Sci. Eng. C, 97, 431, 10.1016/j.msec.2018.12.060
Tuntachon, 2019, Effect of kaolin content and sonication on the properties of wheat gluten composites, Powder Technol., 351, 66, 10.1016/j.powtec.2019.04.007
Unango, 2019, A review on the investigation of biologically active natural compounds on cotton fabrics as an antibacterial textile finishing, Int. Res. J. Sci. Technol., 1, 49, 10.46378/irjst.2019.010107
Vaidya, 2019, Integrating softwood biorefinery lignin into polyhydroxybutyrate composites and application in 3D printing, Mater. Today Commun., 19, 286, 10.1016/j.mtcomm.2019.02.008
Valentina, 2019, Silk fibroin based technology for industrial biomanufacturing, 409
van der Westhuizen, 2019, Preliminary retting research on different kenaf cultivars, S. Afr. J. Plant Soil, 36, 229, 10.1080/02571862.2018.1536931
Velasco-Garduño, 2020, Copper removal from wastewater by a chitosan-based biodegradable composite, Environ. Sci. Pollut. Res., 1
Velde, 2002, Biopolymers : overview of several properties and consequences on their applications, Polym. Test., 21, 433, 10.1016/S0142-9418(01)00107-6
Vieira, 2011, Natural-based plasticizers and biopolymer films: a review, Eur. Polym. J., 47, 254, 10.1016/j.eurpolymj.2010.12.011
Vijay, 2019, Characterization of raw and benzoyl chloride treated Impomea pes-caprae fibers and its epoxy composites, Mater. Res. Express, 6
Vijay, 2019, Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens, Int. J. Biol. Macromol., 125, 99, 10.1016/j.ijbiomac.2018.12.056
Vijay, 2019, Characterization of novel natural fiber from Saccharum Bengalense grass (sarkanda), J. Nat. Fibers, 1–9
Vijay, 2019, Characterization of alkali-treated and untreated natural fibers from the stem of Parthenium Hysterophorus, J. Nat. Fibers, 1
Vijay, 2020, Characterization of silane-treated and untreated natural fibers from stem of leucas aspera, J. Nat. Fibers, 1
Vinayagamoorthy, 2019, Synthesis and property analysis of green resin-based composites, J. Thermoplast. Compos. Mater.
Vincenzo, 2020, Introducing biomaterials for tissue repair and regeneration, 1
Vinod, 2019, Extraction and characterization of natural fiber from stem of Cardiospermum Halicababum, J. Nat. Fibers, 1
Vinod, 2019, Characterization od untreated and alkali treated natural fibers extracted from the stem of catharanthus roseus, Mater. Res. Express, 6, 10.1088/2053-1591/ab22d9
Vojoudi, 2019, A novel inexpensive method for preparation of silk nanofibers from cocoons, Iran. Chem. Commun., 7, 335
Wang, 2002, Processing, mechanical properties, and fracture behavior of cereal protein/poly(hydroxyl ester ether) blends, J. Polym. Sci., Part B: Polym. Phys., 40, 2324, 10.1002/polb.10250
Wang, 2019, Fiber diameter measuring method of textile materials based on phase information, J. Phys. Conf. Ser., 1187
Wang, 2019, Effects of sodium tripolyphosphate modification on the structural, functional, and rheological properties of rice glutelin, Food Chem., 281, 18, 10.1016/j.foodchem.2018.12.085
Wang, 2020, Fabrication and characterization of strontium-hydroxyapatite/silk fibroin biocomposite nanospheres for bone-tissue engineering applications, Int. J. Biol. Macromol., 142, 366, 10.1016/j.ijbiomac.2019.09.107
Wijayapala, 2019, Synthesis and characterization of crosslinked polymers from cottonseed oil, J. Appl. Polym. Sci., 136, 47655, 10.1002/app.47655
Wong, 2002, Properties of poly(3-hydroxybutyric acid) composites with flax fibres modified by plasticiser absorption, Macromol. Mater. Eng., 287, 647, 10.1002/1439-2054(200210)287:10<647::AID-MAME647>3.0.CO;2-7
Wu, 2019, Mechanical properties and impact performance of silk-epoxy resin composites modulated by flax fibres, Compos. Part A Appl. Sci. Manuf., 117, 357, 10.1016/j.compositesa.2018.12.003
Wu, 2019, Enhanced physico-mechanical, barrier and antifungal properties of soy protein isolate film by incorporating both plant-sourced cinnamaldehyde and facile synthesized zinc oxide nanosheets, Colloids Surf. B Biointerfaces, 180, 31, 10.1016/j.colsurfb.2019.04.041
Wu, 2019, Preparation and characterization of konjac glucomannan-based bionanocomposite film for active food packaging, Food Hydrocolloids, 89, 682, 10.1016/j.foodhyd.2018.11.001
Wu, 2019, Enhanced functional properties of biopolymer film incorporated with curcurmin-loaded mesoporous silica nanoparticles for food packaging, Food Chem., 288, 139, 10.1016/j.foodchem.2019.03.010
Wu, 2020, Novel konjac glucomannan films with oxidized chitin nanocrystals immobilized red cabbage anthocyanins for intelligent food packaging, Food Hydrocolloids, 98, 105245, 10.1016/j.foodhyd.2019.105245
Yao, 2020, Corrosion protection of epoxy coatings containing 2- hydroxyphosphonocarboxylic acid doped polyaniline nanofiber, Prog. Org. Coating, 139, 105470, 10.1016/j.porgcoat.2019.105470
Yazawa, 2019, Role of skin layers on mechanical properties and supercontraction of spider dragline silk fiber, Macromol. Biosci., 19, 1, 10.1002/mabi.201970006
Ye, 2019, Bio-based films with improved water resistance derived from soy protein isolate and stearic acid via bioconjugation, J. Clean. Prod., 214, 125, 10.1016/j.jclepro.2018.12.277
Yoo, 2019, Spent coffee grounds as supporting materials to produce bio- composite PCM with natural waxes, Chemosphere, 235, 626, 10.1016/j.chemosphere.2019.06.195
Zainuddin, 2019, Mechanical, fire retardant, water absorption and soil biodegradation properties of poly(3-hydroxy-butyrate-co-3-valerate) nanofilms, J. Polym. Environ., 27, 2292, 10.1007/s10924-019-01517-9
Zeng, 2019, Microwave assisted synthesis and characterization of a novel bio-based flocculant from dextran and chitosan, Int. J. Biol. Macromol., 131, 760, 10.1016/j.ijbiomac.2019.03.116
Zhang, 2016, Mechanical , thermal , and curing characteristics of renewable phenol-hydroxymethylfurfural resin for application in bio-composites, J. Mater. Sci., 51, 732, 10.1007/s10853-015-9392-3
Zhang, 2019, Fabrication of innovative thermoplastic starch bio-elastomer to achieve high toughness poly(butylene succinate) composites, Carbohydr. Polym., 206, 827, 10.1016/j.carbpol.2018.11.036
Zhao, 2019, Use of potato by-products and gallic acid for development of bioactive film packaging by subcritical water technology, J. Supercrit. Fluids, 143, 97, 10.1016/j.supflu.2018.07.025
Zhou, 2019, Development and characterization of bilayer films based on pea starch/polylactic acid and use in the cherry tomatoes packaging, Carbohydr. Polym., 222, 114912, 10.1016/j.carbpol.2019.05.042