Removal of petroleum asphaltenes by improved activity of NiO nanoparticles supported on green AlPO-5 zeolite: Process optimization and adsorption isotherm

Safari, 2017, Effect of neglecting geothermal gradient on calculated oil recovery, J. Appl. Geophys., 138, 33, 10.1016/j.jappgeo.2017.01.006 Mohammadi, 2015, Genetic algorithm development for prediction of modified Langmuir isotherm parameters of asphaltene adsorption onto metal surfaces: using novel quartz crystal nanobalance, J. Dispersion Sci. Technol., 36, 384, 10.1080/01932691.2014.903806 Mohammadi, 2013, Modification of Langmuir isotherm for the adsorption of asphaltene or resin onto calcite mineral surface: comparison of linear and non-linear methods, Protect. Met. Phys. Chem. Surface, 49, 460, 10.1134/S2070205113040205 Lei, 2010, Prediction of asphaltene precipitation during CO2 injection, Petrol. Explor. Dev., 37, 349, 10.1016/S1876-3804(10)60038-9 Madhi, 2018, Screening of inhibitors for remediation of asphaltene deposits: experimental and modeling study, Petroleum, 4, 168, 10.1016/j.petlm.2017.08.001 Shadman, 2017, How much do you know about the methods for determining onset of asphaltene precipitation?, Petroleum, 3, 287, 10.1016/j.petlm.2016.08.011 Xie, 2005, Kinetics and thermodynamics of asphaltene adsorption on metal surfaces: a preliminary study, Energy Fuel., 19, 1252, 10.1021/ef049689+ Abdallah, 2007, Surface characterization of adsorbed asphaltene on a stainless steel surface, Nucl. Instrum. Methods Phys. Res. Sect. B Beam Interact. Mater. Atoms, 258, 213, 10.1016/j.nimb.2006.12.171 Mohammadi, 2012, Comparative study of linearized and non-linearized modified Langmuir isotherm models on adsorption of asphaltene onto mineral surfaces, Surf. Eng. Appl. Electrochem., 48, 234, 10.3103/S1068375512030088 Mohammadi, 2017, TiO 2/SiO 2 nanofluids as novel inhibitors for the stability of asphaltene particles in crude oil: mechanistic understanding, screening, modeling, and optimization, J. Mol. Liq., 238, 326, 10.1016/j.molliq.2017.05.014 Mohammadi, 2018, Application of response surface methodology for optimization of the stability of asphaltene particles in crude oil by TiO2/SiO2 nanofluids under static and dynamic conditions, J. Dispersion Sci. Technol., 39, 431, 10.1080/01932691.2017.1326127 Nassar, 2011, Application of nanotechnology for heavy oil upgrading: catalytic steam gasification/cracking of asphaltenes, Energy Fuel., 25, 1566, 10.1021/ef2001772 Betancur, 2016, Role of particle size and surface acidity of silica gel nanoparticles in inhibition of formation damage by asphaltene in oil reservoirs, Ind. Eng. Chem. Res., 55, 6122, 10.1021/acs.iecr.6b01187 Alboudwarej, 2005, Adsorption of asphaltenes on metals, Ind. Eng. Chem. Res., 44, 5585, 10.1021/ie048948f Dudášová, 2008, Quartz crystal microbalance monitoring of asphaltene adsorption/deposition, J. Dispersion Sci. Technol., 29, 139, 10.1080/01932690701688904 Tarboush, 2015, Dispersed Fe2O3 nanoparticles preparation in heavy oil and their uptake of asphaltenes, Fuel Process. Technol., 133, 120, 10.1016/j.fuproc.2014.12.049 Hasannejada, 2017, Application of silica nanofluid to control initiation of fines migration, Petrol. Explor. Dev., 44, 850, 10.1016/S1876-3804(17)30096-4 Mohammadi, 2019, Asphaltene adsorption using green nanocomposites: experimental study and adaptive neuro-fuzzy interference system modeling, J. Pet. Sci. Eng., 177, 1103, 10.1016/j.petrol.2019.03.003 Negin, 2016, Application of nanotechnology for enhancing oil recovery–A review, Petroleum, 2, 324, 10.1016/j.petlm.2016.10.002 Nassar, 2011, Metal oxide nanoparticles for asphaltene adsorption and oxidation, Energy Fuel., 25, 1017, 10.1021/ef101230g Marei, 2017, Effects of the size of NiO nanoparticles on the catalytic oxidation of Quinolin-65 as an asphaltene model compound, Fuel, 207, 423, 10.1016/j.fuel.2017.06.106 Cai, 2013, Ultra fast electrochromic switching of nanostructured NiO films electrodeposited from choline chloride-based ionic liquid, Electrochim. Acta, 87, 341, 10.1016/j.electacta.2012.09.047 Tahmasian, 2012, Ultrasonic synthesis of a 3D Ni (II) Metal–organic framework at ambient temperature and pressure: new precursor for synthesis of nickel (II) oxide nano-particles, Inorg. Chim. Acta, 387, 327, 10.1016/j.ica.2012.02.017 Zhu, 2013, PEG-directed microwave-assisted hydrothermal synthesis of spherical α-Ni (OH) 2 and NiO architectures, Ceram. Int., 39, 2567, 10.1016/j.ceramint.2012.09.017 Ghasemi, 2013, Copper-phthalocyanine and nickel nanoparticles as novel cathode catalysts in microbial fuel cells, Int. J. Hydrogen Energy, 38, 9533, 10.1016/j.ijhydene.2013.01.177 Sedighi, 2016, Thorough study of the effect of metal-incorporated SAPO-34 molecular sieves on catalytic performances in MTO process, Powder Technol., 291, 131, 10.1016/j.powtec.2015.11.066 Yang, 2011, Synthesis of hierarchical AlPO-n molecular sieves templated by saccharides, Microporous Mesoporous Mater., 144, 176, 10.1016/j.micromeso.2011.04.011 Cheng, 2009, Effect of preparation method on iron-containing AlPO-5 for selective catalytic reduction of N 2 O with methane in the presence of steam, Catal. Commun., 10, 1450, 10.1016/j.catcom.2009.03.017 Feng, 2016, The state of iron sites in the calcined FeAlPO 4-5 and its tuning to the property of microporous AlPO 4-5 molecular sieve, Catal. Today, 263, 91, 10.1016/j.cattod.2015.06.022 Huang, 2011, Highly oriented, neutral and cation-free AlPO 4 LTA: from a seed crystal monolayer to a molecular sieve membrane, Chem. Commun., 47, 4201, 10.1039/c1cc00029b Marlow, 1995, Polarized IR spectra of p-nitroaniline-loaded AlPO4-5 single crystals, J. Phys. Chem., 99, 1306, 10.1021/j100004a034 Mintova, 1998, Nanosized AlPO4-5 molecular sieves and ultrathin films prepared by microwave synthesis, Chem. Mater., 10, 4030, 10.1021/cm980459g Majano, 2015, High-yield nanosized (Si) AlPO-41 using ethanol polarity equalization and co-templating synthesis approach, Nanoscale, 7, 5787, 10.1039/C4NR07272C Sedighi, 2014, Thorough investigation of varying template combinations on SAPO-34 synthesis, catalytic activity and stability in the methanol conversion to light olefin, RSC Adv., 4, 49762, 10.1039/C4RA08607D Sedighi, 2015, Methanol conversion over SAPO-34 catalysts; Systematic study of temperature, space–time, and initial gel composition on product distribution and stability, Fuel, 153, 382, 10.1016/j.fuel.2015.02.107 Wong, 2012, Microscopic investigation of nanocrystalline zeolite L synthesized from rice husk ash, J. Am. Ceram. Soc., 95, 805, 10.1111/j.1551-2916.2011.04995.x Xu, 2014, Synthesis of large single crystals of AlPO–LTA by using n-Propylamine as structure directing agent, J. Cryst. Growth, 407, 1, 10.1016/j.jcrysgro.2014.08.024 Sedighi, 2017, Catalytic performance of CeAPSO-34 molecular sieve with various cerium content for methanol conversion to olefin, Korean J. Chem. Eng., 34, 997, 10.1007/s11814-016-0356-3 Lee, 2003, A combustion-free methodology for synthesizing zeolites and zeolite-like materials, Nature, 425, 385, 10.1038/nature01980 Wang, 2009, Tetramethylguanidine-templated synthesis of aluminophosphate-based microporous crystals with AFI-type structure, Microporous Mesoporous Mater., 117, 561, 10.1016/j.micromeso.2008.07.040 A International, 2005, IP143/01 Marczewski, 2002, Adsorption of asphaltenes from toluene on mineral surface, Colloid. Surf. Physicochem. Eng. Asp., 208, 259, 10.1016/S0927-7757(02)00152-8 Lakouraj, 2015, Preparation and cationic dye adsorption of novel Fe3O4 supermagnetic/thiacalix [4] arene tetrasulfonate self-doped/polyaniline nanocomposite: kinetics, isotherms, and thermodynamic study, J. Chem. Eng. Data, 60, 2262, 10.1021/acs.jced.5b00080 Sedighi, 2018, Application of green novel NiO/ZSM-5 for removal of lead and mercury ions from aqueous solution: investigation of adsorption parameters, J. Water Environ. Nanotechnol., 3, 301 Sedighi, 2018, Green SAPO-5 supported NiO nanoparticles as a novel adsorbent for removal of petroleum asphaltenes: financial assessment, J. Pet. Sci. Eng., 171, 1433, 10.1016/j.petrol.2018.08.030 Wayne, 1950, 1 E.M. FLANIGEN, R.W. GROSE, Phosphorus Substitution in Zeolite Frameworks, ACS Publications1971, Chapter 6, pp 76-101. Nouri, 2013, Evaluation of solvent dearomatization effect in heavy feedstock thermal cracking to light olefin: an optimization study, Korean J. Chem. Eng., 30, 1700, 10.1007/s11814-013-0118-4 Sedighi, 2014, A novel application of a neuro–fuzzy computational technique in modeling of thermal cracking of heavy feedstock to light olefin, RSC Adv., 4, 28390, 10.1039/c4ra02392g Sedighi, 2018, Performance optimisation of microbial fuel cell for wastewater treatment and sustainable clean energy generation using response surface methodology, Alexandria Eng. J., 57, 4243, 10.1016/j.aej.2018.02.012 Sedighi, 2018, Biobased cadaverine as a green template in the synthesis of NiO/ZSM-5 nanocomposites for removal of petroleum asphaltenes: financial analysis, isotherms, and kinetics study, Energy Fuel., 32, 7412, 10.1021/acs.energyfuels.8b01128 Vattani, 2014 Ilbeygi, 2014, Transport properties of SPEEK nanocomposite proton conducting membranes: optimization of additives content by response surface methodology, J. Taiwan Inst. Chem. Eng., 45, 2265, 10.1016/j.jtice.2014.08.005 Yarranton, 2000, Investigation of asphaltene association with vapor pressure osmometry and interfacial tension measurements, Ind. Eng. Chem. Res., 39, 2916, 10.1021/ie000073r Nassar, 2010, Asphaltene adsorption onto alumina nanoparticles: kinetics and thermodynamic studies, Energy Fuel., 24, 4116, 10.1021/ef100458g Mohammadi, 2012, Experimental investigation of asphaltene adsorption on different mineral surfaces and effect of various parameters on the adsorption rate: study of adsorption with UV spectroscopy Mousavi-Dehghani, 2014, A study of asphaltene adsorption manner on reservoir rock surfaces with application of Langmuir isotherm modification, Petrol. Res., 23, 154 Alimohammadi, 2017, Experimental study on efficient removal of total iron from wastewater using magnetic-modified multi-walled carbon nanotubes, Ecol. Eng., 102, 90, 10.1016/j.ecoleng.2017.01.044 Mohammadi, 2019, Modeling and optimization of Nitrate and total Iron removal from wastewater by TiO2/SiO2 nanocomposites, Int. J. Nano Dimens. (IJND), 10, 195 Legates, 1999, Evaluating the use of “goodness‐of‐fit” measures in hydrologic and hydroclimatic model validation, Water Resour. Res., 35, 233, 10.1029/1998WR900018