Reliability analysis for seismic capacity of casing strings
Tóm tắt
Based on the analysis of seismic intensity and randomness, an earthquake intensity probability model is built, and the relationship between seismic intensity and seismic acceleration is presented. The distribution law of casing parameters, including outer diameter, wall thickness, Young’s modulus and Poisson’s ratio, is described by analyzing the randomness of casing geometry and mechanical properties. With the setting up a mechanical model of the casing strings in earthquakes, and using the spectral modal analysis theory and the equivalent static load method, the calculation method of the equivalent load of casing strings under seismic action is studied. The limit state equations of various failure forms of casing strings in earthquakes are established. Based on the theory of structural reliability, the reliability model of casing strings under seismic action is built. The seismic reliability of casing strings is calculated, and the calculation results are verified by field data. The calculation results show that influence of earthquake on safety and reliability of casing strings is very serious for long service life oil and gas wells in areas where the seismic fortification intensity is high.
Từ khóa
Tài liệu tham khảo
Adams AJ, Parfitt S, Reeves T et al (1993) Casing system risk analysis using structural reliability. SPE/IADC 25693:169–178. https://doi.org/10.2118/25693-MS
Architecture Design Handbook Editorial Board (1994) Construction aseismic. Beijing, China
Chen A, Yang Y, Ma R (2016) risk-based design method of disaster-resistance performance for bridge. J Tongji Univ Nat Sci 44:103–109
Construction Department of P.R.C (2001) GB50011-2001: construction earthquake resistant design code. Beijing, China
Dai S, Wang M (1987) Reliability engineering and application in the chemical processing equipment. Beijing, China, pp 30-31
Fu Z (1990) Vibration modal analysis and parameter identification. Beijing, China, pp 40–47
Galambos TV, Ravindra MK (1978) Properties of steel for use in LRFD. Proc J Struct Div ASCE 104:1459–1468
Gao X, Bao A (1985) Probabilistic model and statistical parameter of earthquake effect. Earthq Eng Eng Vib 1:13–22
Gao Z, Zhu J, Tang J et al (1995) Architecture aseismic design. Beijing, China, pp 67–79
Ge H, Shen C, Song L et al (2010) The influence of wenchuan earthquake on puguang gas field development. Eng Sci 10:103–107
He S, Lin H, Zhou L, Liu W, Chang J (2018) Comprehensive analysis the casing deformation in shale gas reservoir modification by seismic and microseismic. SEG 2018 Workshop: Reservoir Geophysics. https://doi.org/10.1190/REGE2018-33.1
Housner GW, Jennings PC (1964) Generation of artificial earthquakes. J Eng Mech Div ASCE 90:437–438
Liu W (1996) Mechanical reliability design. Beijing, China, pp 293–294
Liu H, Lu R, Chen D et al (1981) Revise a proposed projects of earthquake intensity. In: Earthquake engineering research reports (the fourth). Beijing, China, pp 1–13
Shen J, Zhou X, Gao X et al (2000) Earthquake engineering. Beijing, China, pp 97–105
Shuai J, Lv Y, Cai Q (1999) Underground oil pipeline stationary random vibration. Univ Pet J (Phys Sci Ed) 23:65–70
Tao X, Tao Z, Li D et al (2018) Seismic fortification intensity evaluation by a cost-benefits analysis—case study of three bridges. In: 2018 International Conference on Civil and Hydraulic Engineering (IConCHE 2018). https://doi.org/10.1088/1755-1315/189/5/052043
Wu B, Ou J, Zhang J (2002) Structural impair performance design based on reliability. World Earthq Eng 18:10–18
Xu Y (1992) Analyses and prevention of production casing spoiled factors. Drilled Craft 15:63–68
Xue J, Cui D, Wang Z et al (2000) Underground oil pipeline dynamic response in the lateral earthquake effect. J Inst Daqing Pet 24:96–99