Reliability Analysis of Type III Gas Storage Vessel Under Pressure Loading
Tóm tắt
This work presents the suggestion of a model for the prediction of the reliability of type III gas storage vessel under pressure, considering the geometrical and mechanical uncertainties using the Monte Carlo method. Using the hoop stress for each ply, the Monte Carlo method was used to predict the distribution function of the mechanical response. The random design variables of the aluminum liner; which is overwrapped by a composite manufactured by filament winding. Nine random design variables with uncertainties were selected, namely: elastic constants of metallic and composite materials, ply angles, thickness, and finally the mechanical loading (pressure). To ensure the accuracy of the obtained results, we have performed 105 simulations. The obtained results showed that the elastic properties of the composite materials have no significant influence on the security of the composite vessels type III in relation to the manufacturing parameters: which are thickness, winding angle, and the loading pressure. The probability of failure increased significantly when all the random variables were considered simultaneously.
Tài liệu tham khảo
A. Hocine, D. Chapelle, L. Boubakar, A. Benamar, A. Bezazi, Analysis of intermetallic swelling on the behavior of a hybrid solution for compressed hydrogen storage: Part I—Analytical modeling. Int. J. Mater. Design 31, 2435–2443 (2010)
A. Hocine, A. Maizia, M. Chérifi, D. Chapelle, A contribution of the reliability based approach for cylindrical composite of sensitivity analytical design. Adv. Mater. Process. Technol. 3, 1–10 (2017)
A.J. Sobey, J.I.R. Blake, R.A. Shenoi, Monte Carlo reliability analysis of tophat stiffened composite plate structures under out of plane loading. Reliab. Eng. Syst. Saf. 110, 41 (2013)
L.F. Sánchez-Heres, J.W. Ringsberg, E. Johnson, Influence of mechanical and probabilistic models on the reliability estimates of fiber-reinforced cross-ply laminates. Struct. Saf. 51, 35–46 (2014)
D.M. Frangopol, S. Recek, Reliability of fiber-reinforced composite laminate plates. Probab. Eng. Mech. 18, 119–137 (2003)
R.H. Lopez, L.F.F. Miguel, I.M. Belo, J.E. Souza Cursi, Advantages of employing a full characterization method over FORM in the reliability analysis of laminated composite plates. Compos. Struct. 107, 635–642 (2014)
A.P. Teixeira, C. GuedesSoares, T.A. Netto, S.F. Estefen, Reliability of pipelines with corrosion defects. Int. J. Press. Vessels Pip. 85, 228–237 (2008)
C.C. António, L.N. Hoffbauer, An approach for reliability-based robust design optimization of angle-ply composites. Compos. Struct. 90, 53–59 (2009)
M. Meriem-Benziane, S.A. Abdul-Wahab, H. Zahloul, B. Babaziane, M. Hadj-Meliani, G. Pluvinage, Finite element analysis of the integrity of an API X65 pipeline with a longitudinal crack repaired with single-and double-bonded composites. Compos. Part B: Eng. 77, 431–439 (2015)
M. Hadj Meliani, Z. Azari, M. Al-Qadhi, N. Merah, G. Pluvinage, A two-parameter approach to assessing notch fracture behaviour in clay/epoxy nanocomposites. Compos. Part B: Eng. 80, 126–133 (2015)
O. Bouledroua, M. Hadj Meliani, G. Pluvinage, Assessment of pipe defects using a constraint-modified failure assessment diagram. J. Failure Anal. Prev. 17(1), 144–153 (2017)
G. Pluvinage, O. Bouledrou, M. Hadj Meliani, R. Suleiman, Corrosion defect analysis using domain failure assessment diagram. Int. J. Press. Vessels Pip. 165, 126–134 (2018)
O. Bouledroua, M. Hadj Meliani, Z. Azari, A. Sorour, N. Merah, G. Pluvinage, Effect of sandblasting on tensile properties, hardness and fracture resistance of a line pipe steel used in algeria for oil transport. J. Failure Anal. Prev. 17(5), 890–904 (2017)