Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials

Ahmadi, 2014, Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells, J. Mech. Behav. Biomed. Mater, 34, 106, 10.1016/j.jmbbm.2014.02.003

Ahmadi, 2014, Additively manufactured open-cell porous biomaterials made from six different space-filling unit cells: the mechanical and morphological properties

Amin Yavari, 2013, Fatigue behavior of porous biomaterials manufactured using selective laser melting, Mater. Sci. Eng. C, 33, 4849, 10.1016/j.msec.2013.08.006

Amin Yavari, 2014, Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting, Appl. Surf. Sci, 290, 287, 10.1016/j.apsusc.2013.11.069

Amin Yavari, 2014, Effects of bio-functionalizing surface treatments on the mechanical behavior of open porous titanium biomaterials, J. Mech. Behav. Biomed. Mater, 36, 109, 10.1016/j.jmbbm.2014.04.010

Amin Yavari, 2014, Bone regeneration performance of surface-treated porous titanium, Biomaterials, 35, 6172, 10.1016/j.biomaterials.2014.04.054

Aydoğmuş, 2009, Processing of porous TiNi alloys using magnesium as space holder, J. Alloys Compd, 478, 705, 10.1016/j.jallcom.2008.11.141

Babaee, 2012, Mechanical properties of open-cell rhombic dodecahedron cellular structures, Acta Mater, 60, 2873, 10.1016/j.actamat.2012.01.052

Campoli, 2013, Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing, Mater. Des., 49, 957, 10.1016/j.matdes.2013.01.071

Chai, 2011, Perfusion electrodeposition of calcium phosphate on additive manufactured titanium scaffolds for bone engineering, Acta Biomater, 7, 2310, 10.1016/j.actbio.2010.12.032

Christensen, 2012, Anisotropic metamaterials for full control of acoustic waves, Phys. Rev. Lett, 108, 124301, 10.1103/PhysRevLett.108.124301

Cohen, 2010, Microscale metal additive manufacturing of multi-component medical devices, Rapid Prototyp. J, 16, 209, 10.1108/13552541011034889

Dalton, 2013, Electrospinning and additive manufacturing: converging technologies, Biomater. Sci, 1, 171, 10.1039/C2BM00039C

Dias, 2014, Optimization of scaffold design for bone tissue engineering: a computational and experimental study, Med. Eng. Phys, 36, 448, 10.1016/j.medengphy.2014.02.010

Doube, 2010, BoneJ: Free and extensible bone image analysis in ImageJ, Bone, 47, 1076, 10.1016/j.bone.2010.08.023

Elbert, W., The significance of fatigue crack closure. Proceedings of the Damage Tolerance in Aircraft Structures: A Symposium Presented at the Seventy-third Annual Meeting American Society for Testing and Materials, Toronto, Ontario, Canada, 21–26 June 1970, ASTM International, p. 230.

Fang, 2006, Ultrasonic metamaterials with negative modulus, Nat. Mater, 5, 452, 10.1038/nmat1644

Garcia, 2012, 3D printing of anisotropic metamaterials, Prog. Electromagn. Res. Lett, 34, 75, 10.2528/PIERL12070311

Gilat, 2009, Full field strain measurement in compression and tensile split Hopkinson bar experiments, Experimental Mechanics, 49, 291, 10.1007/s11340-008-9157-x

Greaves, 2011, Poisson’s ratio and modern materials, Nat. Mater, 10, 823, 10.1038/nmat3134

Harris, 1998, Open pore biodegradable matrices formed with gas foaming, J. Biomed. Mater. Res., 42, 396, 10.1002/(SICI)1097-4636(19981205)42:3<396::AID-JBM7>3.0.CO;2-E

Heinl, 2008, Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting, Acta Biomater, 4, 1536, 10.1016/j.actbio.2008.03.013

Helfrick, 2011, 3D digital image correlation methods for full-field vibration measurement, Mechanical Syst. Signal Process, 25, 917, 10.1016/j.ymssp.2010.08.013

Hrabe, 2011, Compression‐compression fatigue of selective electron beam melted cellular titanium (Ti‐6Al‐4V), J. Biomed. Mater. Res. B: Appl. Biomater, 99, 313, 10.1002/jbm.b.31901

ISO, 2011. Mechanical testing of metals – Ductility testing – Compression test for porous and cellular metals, ISO 13314:2011.

Jaecques, 2004, Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone, Biomaterials, 25, 1683, 10.1016/S0142-9612(03)00516-7

Ju, J., Summers, J.D., Ziegert, J., Fadel, G., Design of honeycomb meta-materials for high shear flexure. Proceedings of the ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, American Society of Mechanical Engineers, pp. 805–813.

Kim, 2006, Gas foamed open porous biodegradable polymeric microspheres, Biomaterials, 27, 152, 10.1016/j.biomaterials.2005.05.081

Kolk, 2012, Current trends and future perspectives of bone substitute materials–from space holders to innovative biomaterials, J. Cranio-Maxillofac. Surg, 40, 706, 10.1016/j.jcms.2012.01.002

Levy, 2007, Inhomogenous dielectric metamaterials with space-variant polarizability, Phys. Rev. Lett, 98, 243901, 10.1103/PhysRevLett.98.243901

Lewis, 2013, Properties of open-cell porous metals and alloys for orthopaedic applications, J. Mater. Sci.: Mater. Med, 24, 2293

Li, 2014, Influence of cell shape on mechanical properties of Ti–6Al–4V meshes fabricated by electron beam melting method, Acta Biomater., 10, 4537, 10.1016/j.actbio.2014.06.010

Li, 2009, Ti6Ta4Sn alloy and subsequent scaffolding for bone tissue engineering, Tissue Eng. A, 15, 3151, 10.1089/ten.tea.2009.0150

Liang, 2012, Extreme acoustic metamaterial by coiling up space, Phys. Rev. Lett, 108, 114301, 10.1103/PhysRevLett.108.114301

Méjica, 2013, Comparative study of potential pentamodal metamaterials inspired by Bravais lattices, Smart Mater. Struct, 22, 115013, 10.1088/0964-1726/22/11/115013

Melchels, 2012, Additive manufacturing of tissues and organs, Prog. Polym. Sci, 37, 1079, 10.1016/j.progpolymsci.2011.11.007

Murr, 2011, Microstructure and mechanical properties of open-cellular biomaterials prototypes for total knee 1replacement implants fabricated by electron beam melting, J. Mech. Behav. Biomed. Mater, 4, 1396, 10.1016/j.jmbbm.2011.05.010

Niu, 2009, Processing and properties of porous titanium using space holder technique, Mater. Sci. Eng. A, 506, 148, 10.1016/j.msea.2008.11.022

Pan, 2011, Recent progress in digital image correlation, Experimental Mechanics, 51, 1223, 10.1007/s11340-010-9418-3

Park, 2011, Amplification of acoustic evanescent waves using metamaterial slabs, Phys. Rev. Lett, 107, 194301, 10.1103/PhysRevLett.107.194301

Parthasarathy, 2011, A design for the additive manufacture of functionally graded porous structures with tailored mechanical properties for biomedical applications, J. Manufacturing Processes, 13, 160, 10.1016/j.jmapro.2011.01.004

Patterson, 2007, Calibration and evaluation of optical systems for full-field strain measurement, Optics Lasers Eng, 45, 550, 10.1016/j.optlaseng.2006.08.012

Podshivalov, 2013, Design, analysis and additive manufacturing of porous structures for biocompatible micro-scale scaffolds, Procedia CIRP, 5, 247, 10.1016/j.procir.2013.01.049

Poelert, 2013, Patient-specific finite element modeling of bones, Proc. Inst. Mech. Eng. H: J. Eng. Med, 227, 464, 10.1177/0954411912467884

Reggiani, 2007, Predicting the subject-specific primary stability of cementless implants during pre-operative planning: preliminary validation of subject-specific finite-element models, J. Biomech, 40, 2552, 10.1016/j.jbiomech.2006.10.042

Salerno, 2009, Design of porous polymeric scaffolds by gas foaming of heterogeneous blends, J. Mater. Sci. Mater. Med, 20, 2043, 10.1007/s10856-009-3767-4

Schijve, 2001

Schmidt, 2003, Full‐field dynamic displacement and strain measurement using advanced 3d image correlation photogrammetry: part 1, Exp. Tech, 27, 47, 10.1111/j.1747-1567.2003.tb00115.x

Schuller, 2007, Dielectric metamaterials based on electric and magnetic resonances of silicon carbide particles, Physical Rev. Lett, 99, 107401, 10.1103/PhysRevLett.99.107401

Sugimura, 1999, Compression fatigue of a cellular Al alloy, Mater. Sci. Eng. A, 269, 38, 10.1016/S0921-5093(99)00147-1

Truscello, 2012, Prediction of permeability of regular scaffolds for skeletal tissue engineering: a combined computational and experimental study, Acta Biomaterialia, 8, 1648, 10.1016/j.actbio.2011.12.021

Van Bael, 2012, The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds, Acta Biomaterialia, 8, 2824, 10.1016/j.actbio.2012.04.001

Van der Stok, 2013, Selective laser melting‐produced porous titanium scaffolds regenerate bone in critical size cortical bone defects, J. Orthop. Res, 31, 792, 10.1002/jor.22293

Vendra, 2009, Fatigue in aluminum–steel and steel–steel composite foams, Mater. Sci. Eng. A, 517, 146, 10.1016/j.msea.2009.03.075

Vynck, 2009, All-dielectric rod-type metamaterials at optical frequencies, Phys. Rev. Lett, 102, 133901, 10.1103/PhysRevLett.102.133901

Wang, 2009, Porous TiNbZr alloy scaffolds for biomedical applications, Acta Biomaterialia, 5, 3616, 10.1016/j.actbio.2009.06.002

Wauthle, 2014, Effects of build orientation and heat treatments on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice strcutures, Addit. Manuf, 10.1016/j.addma.2014.12.008

Wen, 2010, Porous shape memory alloy scaffolds for biomedical applications: a review, Phys. Scr, 2010, 014070, 10.1088/0031-8949/2010/T139/014070

Yoon, 2001, Degradation behaviors of biodegradable macroporous scaffolds prepared by gas foaming of effervescent salts, J. Biomed. Mater. Res, 55, 401, 10.1002/1097-4636(20010605)55:3<401::AID-JBM1029>3.0.CO;2-H

Zadpoor, 2008, Experimental and numerical study of machined aluminum tailor-made blanks, J. Mater. Process. Technol, 200, 288, 10.1016/j.jmatprotec.2007.09.049

Zhao, 2009, Mie resonance-based dielectric metamaterials, Mater. Today, 12, 60, 10.1016/S1369-7021(09)70318-9

Zhou, F., 2013. Three Dimensional Micro and Nano Fabrication of Metamaterials, (Ph.D. thesis). Northwestern University, US.