Reducing environmental problems and increasing saving energy by proposing new configuration for moving bed thermally coupled reactors

Agar, 1999, Multifunctional reactors: old preconceptions and new dimensions, Chem. Eng. Sci., 54, 1299, 10.1016/S0009-2509(99)00040-8 Alvarez, 2000, Pilot plant performance of a SO2 to SO3 oxidation catalyst for flue-gas conditioning, Catal. Today, 59, 417, 10.1016/S0920-5861(00)00307-2 Avci, 2001, Heterogeneous reactor modeling for simulation of catalytic oxidation and steam reforming of methane, Chem. Eng. Sci., 56, 641, 10.1016/S0009-2509(00)00271-2 Barbier, 1986, Deactivation of reforming catalysts by coking- a review, Appl. Catal., 23, 225, 10.1016/S0166-9834(00)81294-4 Bishara, 1984, Effect of feed composition and operating conditions on catalyst deactivation and on product yield and quality during naphtha catalytic reforming, Appl. Catal., 13, 113, 10.1016/S0166-9834(00)83332-1 Carter, 1982, Bimetallic catalysis; application in catalytic reforming, Appl. Catal., 3, 327, 10.1016/0166-9834(82)80267-4 Chaudhary, 2000, High temperature catalytic oxidative conversion of propane to propylene and ethylene involving coupling of exothermic and endothermic reactions, Ind. Eng. Chem. Res., 39, 904, 10.1021/ie990599f De Groote, 1996, Simulation of the catalytic partial oxidation of methane to synthesis gas, Appl. Catal. A., 138, 245, 10.1016/0926-860X(95)00299-5 De Groote, 1996, Synthesis gas production from natural gas in a fixed bed reactor with reversed flow, Can. J. Chem. Eng., 74, 735, 10.1002/cjce.5450740525 Dunn, 1998, Oxidation of sulfur dioxide to sulfur trioxide over supported vanadia catalysts, Appl. Catal. B., 19, 103, 10.1016/S0926-3373(98)00060-5 Elnashaie, 2000, Modeling and basic characteristics of novel integrated dehydrogenation–hydrogenation membrane catalytic reactors, Comput. Chem. Eng., 24, 1293, 10.1016/S0098-1354(00)00335-5 Figoli, 1983, Operational conditions and coke formation on Pt–Al2O3 reforming catalyst, Appl. Catal., 5, 19, 10.1016/0166-9834(83)80292-9 Figoli, 1983, Influence of total pressure and hydrogen: hydrocarbon ratio on coke formation over naphtha-reforming catalyst, 239 Fogler, 1992 Froment, 1979 Gerald, 1989 Gosiewski, 2001, Simulations of non-stationary reactors for the catalytic conversion of methane to synthesis gas, Chem. Eng. Sci., 56, 1501, 10.1016/S0009-2509(00)00376-6 Gyngazova, 2011, Reactor modeling and simulation of moving-bed catalytic reforming process, Chem. Eng. J., 176–177, 134, 10.1016/j.cej.2011.09.128 Hongjun, 2010, Modeling and simulation of moving bed reactor for catalytic naphtha reforming, Pet. Sci. Technol., 28, 667, 10.1080/10916460902804598 Hu, 2004, Molecular modeling and optimization for catalytic reforming, Chem. Eng. Commun., 191, 500, 10.1080/00986440390255933 Hu, 2003, Modeling and simulation of commercial catalytic reformers, Chin. J. Chem. Eng., 17, 418 Iranshahi, 2013, Modeling and simulation of a novel membrane reactor in continuous catalytic regenerative (CCR) naphtha reformer accompanied with detailed description of kinetic, Energy Fuels, 27, 4048, 10.1021/ef302057k Itoh, 1997, An adiabatic type of palladium membrane reactor for coupling endothermic and exothermic reactions, J. Membr. Sci., 124, 213, 10.1016/S0376-7388(96)00239-6 Jorge, 2000, Kinetic modeling of naphtha catalytic reforming reactions, Energy Fuels, 14, 1032, 10.1021/ef0000274 Jorgensen, 2007, Homogeneously and heterogeneously catalyzed oxidation of SO2, Chem. Eng. Sci., 62, 4496, 10.1016/j.ces.2007.05.016 Juarez, 2000, Kinetic modeling of naphtha catalytic reforming reactions, Energy Fuels, 14, 1032, 10.1021/ef0000274 Khademi, 2009, A novel configuration for hydrogen production from coupling of methanol and benzene synthesis in a hydrogen perm selective membrane reactor, Int. J. Hydrog. Energy, 34, 5091, 10.1016/j.ijhydene.2009.04.007 Khademi, 2009, Optimization of methanol synthesis and cyclohexane dehydrogenation in a thermally coupled reactor using differential evolution (DE) method, Int. J. Hydrog. Energy, 34, 6930, 10.1016/j.ijhydene.2009.06.018 Khademi, 2010, Differential evolution (DE) strategy for optimization of hydrogen production, cyclohexane dehydrogenation and methanol synthesis in a hydrogen-perm selective membrane thermally coupled reactor, Int. J. Hydrog. Energy, 35, 1936, 10.1016/j.ijhydene.2009.12.080 Kolios, 2000, Autothermal fixed bed reactor concepts, Chem. Eng. Sci., 55, 5945, 10.1016/S0009-2509(00)00183-4 Kulkarni, 1996, Dynamics of gas phase and solid phase reactions in a fixed bed reactors, Chem. Eng. Sci., 51, 3083, 10.1016/0009-2509(96)00201-1 Kulkarni, 1998, Periodic operation of asymmetric bidirectional fixed-bed reactors with temperature limitations, Ind. Eng. Chem. Res., 37, 770, 10.1021/ie970368d Kuo, 1969, A lumping analysis in monomolecular reaction systems, Ind. Eng. Chem. Fund., 8, 124, 10.1021/i160029a020 Li, 2005, Modeling and optimization of a semi-regenerative catalytic naphtha reformer Lee, 1997, A modeling and simulation study on a naphtha reforming unit with a catalyst circulation and regeneration system, Comput. Chem. Eng., 21, 1105, 10.1016/S0098-1354(97)87650-8 Lee, 2005, Removal of sulfur dioxide using absorbent synthesized from coal fly ash: role of oxygen and nitrogen oxide in the desulfurization reaction, Chem. Eng. Sci., 60, 3419, 10.1016/j.ces.2005.01.002 Liu, 1997, Kinetics of catalyst coking in heptane reforming over Pt–Re/Al2O3, Ind. Eng. Chem. Res., 36, 3264, 10.1021/ie970055i Ma, 1996, Alternative catalyst bed configurations for the autothermic conversion of methane to hydrogen, Appl. Catal. A., 138, 265, 10.1016/0926-860X(95)00300-2 Moustafa, 2000, Simulation production of styrene and cyclohexane in an integrated membrane reactor, J. Membr. Sci., 178, 171, 10.1016/S0376-7388(00)00488-9 Naidoo, 2005, A kinetic study of the reaction of atomic oxygen with SO2, Proc. Combust. Inst., 30, 1219, 10.1016/j.proci.2004.08.214 Nauman, 2001 Pisyorius, 1985, Analysis improves catalytic reformer troubleshooting, Oil Gas. J., 23, 147 Prins, 1980, Modern processes for the catalytic reforming of hydrocarbons, 389 Rahimpour, 2011, Enhancement of simultaneous hydrogen production and methanol synthesis in thermally coupled double-membrane reactor, Int. J. Hydrog. Energy, 36, 284, 10.1016/j.ijhydene.2010.09.074 Ridler, 1989, Steam Reforming Smith, 1959, Kinetic analysis of naphtha reforming with platinum catalyst, Chem. Eng. Prog., 55, 76 Stijepovic, 2010, Optimization approach for continuous catalytic regenerative reformer processes, Energy Fuels, 24, 1908, 10.1021/ef901193v Taskar, 1997, Modeling and optimization of a semiregenerative catalytic naphtha reformer, AIChE J., 43, 740, 10.1002/aic.690430319 Weifeng, 2007, Multi objective optimization of the industrial naphtha catalytic reforming process, Chin. J. Chem. Eng., 15, 75, 10.1016/S1004-9541(07)60036-6 Weifeng, 2006, Modeling, simulation and optimization of a whole industrial catalytic naphtha reforming process on Aspen Plus platform, Chin. J. Chem. Eng., 14, 584, 10.1016/S1004-9541(06)60119-5 Weiszmann, 1986, Catalytic re-reforming, 3