Reduced-Dimensional α-CsPbX3 Perovskites for Efficient and Stable Photovoltaics

Stranks, 2013, Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber, Science, 342, 341, 10.1126/science.1243982 Burschka, 2013, Sequential deposition as a route to high-performance perovskite-sensitized solar cells, Nature, 499, 316, 10.1038/nature12340 Shi, 2015, Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals, Science, 347, 519, 10.1126/science.aaa2725 Saidaminov, 2015, High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization, Nat. Commun., 6, 7586, 10.1038/ncomms8586 Zhu, 2018, Highly efficient and stable perovskite solar cells enabled by all-crosslinked charge-transporting layers, Joule, 2, 168, 10.1016/j.joule.2017.11.006 Yang, 2015, High-performance photovoltaic perovskite layers fabricated through intramolecular exchange, Science, 348, 1234, 10.1126/science.aaa9272 Jeon, 2015, Compositional engineering of perovskite materials for high-performance solar cells, Nature, 517, 476, 10.1038/nature14133 Tan, 2017, Efficient and stable solution-processed planar perovskite solar cells via contact passivation, Science, 355, 722, 10.1126/science.aai9081 Kim, 2012, Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%, Sci. Rep., 2, 591, 10.1038/srep00591 Quan, 2016, Ligand-stabilized reduced-dimensionality perovskites, J. Am. Chem. Soc., 138, 2649, 10.1021/jacs.5b11740 Li, 2015, Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid ω-ammonium chlorides, Nat. Chem., 7, 703, 10.1038/nchem.2324 Mei, 2014, A hole-conductor−free, fully printable mesoscopic perovskite solar cell with high stability, Science, 345, 295, 10.1126/science.1254763 Green, 2014, The emergence of perovskite solar, Nat. Photonics, 8, 506, 10.1038/nphoton.2014.134 Kulbak, 2016, Cesium enhances long-term stability of lead bromide perovskite-based solar cells, J. Phys. Chem. Lett., 7, 167, 10.1021/acs.jpclett.5b02597 Stoumpos, 2013, Crystal growth of the perovskite semiconductor CsPbBr3: a new material for high-energy radiation detection, Cryst. Growth Des., 13, 2722, 10.1021/cg400645t Eperson, 2015, Inorganic caesium lead iodide perovskite solar cells, J. Mater. Chem. A., 3, 19688, 10.1039/C5TA06398A Wang, 2017, Stabilizing the α-phase of CsPbI3 perovskite by sulfobetaine zwitterionsin one-step spin-coating films, Joule, 1, 371, 10.1016/j.joule.2017.07.017 Zhou, 2014, Interface engineering of highly efficient perovskite solar cells, Science, 345, 542, 10.1126/science.1254050 Liang, 2014, Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells, Adv. Mater., 26, 3748, 10.1002/adma.201400231 Zhu, 2014, High-performance hole-extraction layer of sol–gel-processed NiO nanocrystals for inverted planar perovskite solar cells, Angew. Chem. Int. Ed., 53, 12571 Liang, 2017, CsPb0.9Sn0.1IBr2 based all-Inorganic perovskite solar cells with exceptional efficiency and stability, J. Am. Chem. Soc., 139, 14009, 10.1021/jacs.7b07949 Chen, 2017, All-vacuum-deposited stoichiometrically balanced inorganic cesium lead halide perovskite solar cells with stabilized efficiency exceeding 11%, Adv. Mater., 29, 1605290, 10.1002/adma.201605290 Beal, 2016, Cesium lead halide perovskites with improved stability for tandem solar cells, J. Phys. Chem. Lett., 7, 746, 10.1021/acs.jpclett.6b00002 Sutton, 2016, Bandgap-tunable cesium lead halide perovskites with high thermal stability for efficient solar cells, Adv. Energy Mater., 6, 1502458, 10.1002/aenm.201502458 Zhou, 2017, Light-independent ionic transport in inorganic perovskite and ultrastable Cs-based perovskite solar cells, J. Phys. Chem. Lett., 8, 4122, 10.1021/acs.jpclett.7b01851 Swarnkar, 2016, Quantum dot-induced phase stabilization of á-CsPbI3 perovskite for high-efficiency photovoltaics, Science, 354, 92, 10.1126/science.aag2700 Zhang, 2017, Bication lead iodide 2D perovskite component to stabilize inorganic α-CsPbI3 perovskite phase for high-efficiency solar cells, Sci. Adv., 3, e1700841, 10.1126/sciadv.1700841 Wang, 2015, HPbI3: a new precursor compound for highly efficient solution-processed perovskite solar cells, Adv. Funct. Mater., 25, 1120, 10.1002/adfm.201404007 Smith, 2014, A layered hybrid perovskite solar-cell absorber with enhanced moisture stability, Angew. Chem. Int. Ed., 53, 1, 10.1002/anie.201406466 Xu, 2015, Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes, Nat. Commun., 6, 7081, 10.1038/ncomms8081 Zhou, 2015, Methylamine-gas-induced defect-healing behavior of CH3NH3PbI3 thin films for perovskite solar cells, Angew. Chem. Int. Ed., 54, 9705, 10.1002/anie.201504379 Frolova, 2017, Highly efficient all-inorganic planar heterojunction perovskite solar cells produced by thermal coevaporation of CsI and PbI2, J. Phys. Chem. Lett., 8, 67, 10.1021/acs.jpclett.6b02594 Pang, 2016, Transformative evolution of organolead triiodide perovskite thin films from strong room-temperature solid–gas interaction between HPbI3-CH3NH2 precursor pair, J. Am. Chem. Soc., 138, 750, 10.1021/jacs.5b11824 Liang, 2016, All-inorganic perovskite solar cells, J. Am. Chem. Soc., 138, 15829, 10.1021/jacs.6b10227 Noh, 2013, Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells, Nano Lett., 13, 1764, 10.1021/nl400349b Ma, 2016, Hole transport layer free inorganic CsPbIBr2 perovskite solar cell by dual source thermal evaporation, Adv. Energy Mater., 6, 1502202, 10.1002/aenm.201502202 Stoumpos, 2016, Ruddlesden–Popper hybrid lead iodide perovskite 2D homologous semiconductors, Chem. Mater., 28, 2852, 10.1021/acs.chemmater.6b00847 Fu, 2017, Stabilization of the metastable lead iodide perovskite phase via surface functionalization, Nano Lett., 17, 4405, 10.1021/acs.nanolett.7b01500 Peng, 2017, Ultralow self-doping in two-dimensional hybrid perovskite single crystals, Nano Lett., 17, 4759, 10.1021/acs.nanolett.7b01475 Liao, 2017, Highly oriented low-dimensional tin halide perovskites with enhanced stability and photovoltaic performance, J. Am. Chem. Soc., 139, 6693, 10.1021/jacs.7b01815 Quan, 2017, Tailoring the energy landscape in quasi-2D halide perovskites enables efficient green-light emission, Nano Lett., 17, 3701, 10.1021/acs.nanolett.7b00976 Yuan, 2016, Perovskite energy funnels for efficient light-emitting diodes, Nat. Nanotechnol., 11, 872, 10.1038/nnano.2016.110 Yao, 2016, Multilayered perovskite materials based on polymeric-ammonium cations for stable large-area solar cell, Chem. Mater., 28, 3131, 10.1021/acs.chemmater.6b00711 Wang, 2017, Efficient ambient-air-stable solar cells with 2D–3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites, Nat. Energy, 2, 17135, 10.1038/nenergy.2017.135 Luo, 2016, Solvent engineering for ambient-air-processed, phase-stable CsPbI3 in perovskite solar cells, J. Phys. Chem. Lett., 7, 3603, 10.1021/acs.jpclett.6b01576 Fai, 2016, CsPbIBr2 perovskite solar cell by spray-assisted deposition ACS, Energy Lett., 1, 573, 10.1021/acsenergylett.6b00341