Recycling technologies for thermoset composite materials—current status

Bos G. EU waste legislation and the composites industry. Seminar on recycling of composite materials, IFP SICOMP, Molndal, Sweden; 14th–15th May 2002.

Sims G, Bishop G. UK Polymer composites sector-competitive analysis and foresight study. Final report, Published by NPL Materials Centre; July 2001.

Scheirs, 1998

Hartt, 1992, Economics of recycling thermosets, 10.4271/920802

Sims B, Booth CA, Lakshmanan. Process for separating fibres from composite materials. International Patent WO 93/05883, granted to Phoenix Fibreglas, Inc.; 1993.

Bledzki AK, Kurek K, Barth Ch. Development of a thermoset part with SMC reclaim. In: Proceedings of ANTEC '92 50 years: plastics shaping and the future. Technical Papers, vol. 50. Detroit, MI: Society of Plastics Engineers; 1992. p. 1558–60.

Butler K. Recycling of molded SMC and BMC materials, 46th Annual conference, Composites Institute. The Society of Plastics Engineers, 18–21 February, Session 18B; 1991. p. 1–8.

Jutte RB, Graham WD. Recycling SMC. 46th annual conference, composites institute. The Society of Plastics Engineers, 18–21 February, Session 18A; 1991. p. 1–6.

DeRosa, 2004, Expanding the use of recycled SMC in BMCs

Bream, 2002, Comminuted thermoset recyclate as a reinforcing filler for thermoplastics Part I characterisation of recyclate feedstocks, J Mater Sci, 36, 2965, 10.1023/A:1017962722495

Bream, 2002, Comminuted thermoset recyclate as a reinforcing filler for thermoplastics Part II. Structure-property effects in polypropylene compositions, J Mater Sci, 36, 2977, 10.1023/A:1017914806565

Composite recycling—raw material for the future. ERCOM composite recycling GmbH.

Bevis, 1996, Comminution and reuse of thermosetting plastics waste

Kernan announces grant for Ashley industrial molding to study recycling of fibreglass composite into asphalt. Press release from Indiana department of commerce, Indianapolis Indiana USA; 23 January 2002.

Conroy, 2004, Recycling fibre reinforced polymers in construction: a guide to best practicable environmental option

Bevis, 1998, Thermoset recyclate as a functional filler for polymers

Skrifvars M. Introduction to composites recycling. COMPOSIT thematic network workshop, Recycling of composite materials in transport, SICOMP, Pitea, Sweden; 16th June 2003. Papers available at: http://www.compositn.net.

GPRMC Press Release 2003-2. European composites industry association, Diamant building, Boulevard A, Reyerslann 80, BE-1030 Brussels, Belgium 2003. http://www.gprmc.be.

Halliwell, 2003, Markets for fibre reinforced polymer recyclate

Thomas, 2000, The dynamic properties of recycled thermoset composites

Pickering SJ, Benson M. The recycling of thermosetting plastics. Plastics and rubber institute, Second international conference plastics recycling; 13–14 March 1991, London, p. 23/1–10.

Nystrom B. Energy recovery from composite materials. Seminar on recycling of composite materials, IFP SICOMP, Molndal, Sweden; 14th–15th May 2002.

Pickering, 1993, Recovery of materials and energy from thermosetting plastics

Fenwick, 1994, Using waste materials to reduce emissions-combustion of glass reinforced plastic with coal in a fluidised bed

Pickering, 2000, A fluidised bed process for the recovery of glass fibres from scrap thermoset composites, Compos Sci Technol, 60, 509, 10.1016/S0266-3538(99)00154-2

Yip, 2002, Characterisation of carbon fibres recycled from scrap composites using fluidized bed process, Plast Rubber Compos, 31, 278, 10.1179/146580102225003047

Curcuras CN, Flax AM, Graham WD, Hartt GN Recycling of thermoset automotive components. SAE Technical Paper Series, 910387; 1991. p. 16.

Soh, 1994, Low temperature pyrolysis of SMC scrap

Torres, 2000, Recycling by pyrolysis of thermoset composites: characteristics of the liquid and gaseous fuels obtained, Fuel, 79, 897, 10.1016/S0016-2361(99)00220-3

Cunliffe, 2003, Characterisation of products from the recycling of glass fibre reinforced polyester waste by pyrolysis, Fuel, 82, 2223, 10.1016/S0016-2361(03)00129-7

Cunliffe, 2003, Pyrolysis of composite plastic waste, Environ Technol, 24, 653, 10.1080/09593330309385599

Allred, 1996, Recycling process for scrap composites and prepregs, SAMPE J, 32, 46

Unser, 1996, Advanced composites recycling, SAMPE J, 32, 52

Allred, 1996, Properties of carbon fibres reclaimed from composite manufacturing scrap by tertiary recycling

Allred RE, Newmeister GC, Doak TJ, Cochran RC, Coons AB. Tertiary recycling of cured composite aircraft parts. Technical paper EM97-110. Dearborn, MI: Society of Manufacturing Engineers; 1997.

Ushikoshi, 1995, Recycling of CFRP by pyrolysis method, J Soc Mater Sci Jpn, 44, 428, 10.2472/jsms.44.428

Composite Recycling and Disposal—An Environmental R&D Issue. Boeing Environmental Technotes, Vol. 8, Number 4; November 2003, Boeing Company, PO Box 516, St Louis, MO, USA.

Engineering and Physical Sciences Research Council UK (EPSRC). Processing recycled carbon fibre for high grade applications, Grant Ref GR/R80605/01; July 2002 to Dec 2005.

Bell, 2002, Environmental aspects of the use of carbon fibre composites in vehicles-recycling and life cycle analysis.ELV

Grove-Neilsen E. Material and thermal recycling of wind turbine blades and other fibreglass items by ReFiber ApS. COMPOSIT Thematic Network Workshop, Recycling of composite materials in transport, SICOMP, Pitea, Sweden; 16th June 2003. Papers available at: http://www.compositn.net.

Harbers F. Green FRP recycling label—the step towards closing the loop. COMPOSIT Thematic Network Workshop, recycling of composite materials in transport, SICOMP, Pitea, Sweden, 16th June 2003. Papers available at: http://www.compositn.net.

COMPOSIT Thematic Network Workshop, Recycling of composite materials in transport, SICOMP, Pitea, Sweden; 16th June 2003. Papers available at: http://www.compositn.net

Thomas, 1960, An investigation into the factors likely to affect the strength and properties of glass fibres, Phys Chem Glasses, 1, 4