Recycling carbon fibre reinforced polymers for structural applications: Technology review and market outlook
Tóm tắt
Từ khóa
Tài liệu tham khảo
AFRA, 2006. Aircraft Fleet Recycling Association. Official website at: <www.afraassociation.org> (last accessed July 2010).
AFRA, 2009. Best Management Practice for Management of Used Aircraft Parts and Assemblies. AFRA Board. Available online at: <www.afraassociation.org/AFRAPartsBMPv2_2.pdf>.
Allen, B.E., 2008. Characterization of Reclaimed Carbon Fibers and their Integration into New Thermoset Polymer Matrices via Existing Composite Fabrication Techniques. Master thesis. North Carolina State University, Raleigh, NC, USA.
Allred, 2001, Recycling process for carbon/epoxy composites
Alsop, 2009, Pyrolysis off-gas processing
Astrom, 1997
ATI, 1994. Adherent Technologies Inc. Official website at: <www.adherenttech.com> (last accessed July 2010).
BIS, 2009. The UK Composites Strategy. Department for Business, Innovation & Skills. Available online at: <interactive.bis.gov.uk/advancedmanufacturing> (last accessed July 2010).
Blueseventy, 2010. Carbon race googles. Blueseventy. Available online at: <www.blueseventy.com/products/detail/carbon_race> (last accessed July).
BMCI, 2010a. BMC 304 Data Sheet. Bulk Molding Componds Inc. Available online at: <www.bulkmolding.com/datasheets/informational/BMC_304.pdf> (last accessed July 2010).
BMCI, 2010b. BMC 310 Data Sheet. Bulk Molding Componds Inc. Available online at: <www.bulkmolding.com/datasheets/informational/BMC_310.pdf> (last accessed July 2010).
Borealis, 2009. Case Study: BMW 7 Series Dashboard Carrier. Borealis Group. Available online at: <www.borealisgroup.com/pdf/literature/borealis-borouge/case-study/MY_CAST097_GB_2010_02_BB.pdf> (last accessed July 2010).
Buggy, 1995, Recycling of composite materials, J. Mater. Process. Technol., 55, 448, 10.1016/0924-0136(95)02037-3
Carberry, 2008, Airplane Recycling Efforts Benefit Boeing Operators, Boeing AERO Magazine QRT 4.08, 6
Carberry, W., 2009. Aerospace’s role in the development of the recycled carbon fibre supply chain. In: Carbon Fibre Recycling and Reuse 2009 Conference, IntertechPira, Hamburg, Germany.
CFK, 2007. CFK Valley Stade Recycking GmbH & Co. KG. Official website at: <www.cfk-recycling.com> (last accessed July 2010).
CFRRC, 2009. Carbon Fibre Recycling and Reuse Conference. Official website at: <www.cfrecycling.com> (last accessed July 2010).
Connor, M.L., 2008. Characterization of Recycled Carbon Fibers and Their Formation of Composites Using Injection Molding. Master thesis. North Carolina State University, Raleigh, NC, USA.
Conroy, 2006, Composite recycling in the construction industry, Composites Part A, 37, 1216, 10.1016/j.compositesa.2005.05.031
Cornacchia, 2009, Carbon fiber recovery from waste composites: an integrated approach for a commercially successful recycling operation
Cunliffe, 2003, Pyrolysis of composite plastic waste, Environ. Technol., 24, 653, 10.1080/09593330309385599
Curry, 2010, Successful research programme allows high performance brake discs to be manufactured at lower cost, Press Release Log, 1
DeRosa, 2005, Current state of recycling sheet molding compounds and related materials, J. Thermoplast. Compos. Mater., 18, 219, 10.1177/0892705705045006
Eckert, 1996, Supercritical fluids as solvents for chemical and materials processing, Nature, 383, 313, 10.1038/383313a0
ECRC, 2003. ECRC Services Company. Official website at: <www.ecrc-greenlabel.org> (last accessed January 2010).
Ellison, G.C., McNaught, R., 2000. The use of natural fibres in nonwoven structures for applications as automotive component substrates. Research & Development Report NF0309. Ministry of Agriculture, Fisheries and Food, UK.
EU 1999/31/EC, 1999. Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste. The Council of the European Union, Official Journal of the European Communities L 182–42, 1–19.
EU 2000/53/EC, 2000. Directive 2000/53/EC of the European Parliament and of the Council of 18 September 2000 on end-of-life vehicles. The Council of the European Union, Official Journal of the European Communities L 269–43, 34–42.
GCF, 2010. Green Carbon Fibre. Official website at: <www.greencarbonfibre.com> (last accessed July 2010).
George, P.E., 2009. End user perspective: perspective on carbon fibre recycling from a major end user. In: Carbon Fibre Recycling and Reuse 2009 Conference, IntertechPira, Hamburg, Germany.
Giannadakis, 2010, Mechanical performance of a recycled carbon fibre/PP composite, Exp. Mech.
Gibson, 2010, A review of recent research on mechanics of multifunctional composite materials and structures, Compos. Struct., 92, 2793, 10.1016/j.compstruct.2010.05.003
Gosau, 2009, Carbon fiber reclamation from state-of-the-art 2nd generation aircraft composites
Gosau, J.M., Wesley, T.F., Allred, R.E., 2009b. Recovering carbon fibre and more from scrap composite material. In: Carbon Fibre Recycling and Reuse 2009 Conference, IntertechPira, Hamburg, Germany.
Goto, 2009, Chemical recycling of plastics using sub- and supercritical fluids, J. Supercrit. Fluids, 47, 500, 10.1016/j.supflu.2008.10.011
HADEG, 1995. HADEG Recycling GmbH. Official website at: <www.hadeg-recycling.de> (last accessed July 2010).
Heil, 2009, A comparison of chemical, morphological and mechanical properties of various recycled carbon fibers
Hitachi, 2010. Hitachi Chemical Co. Ltd. Official website at: <www.hitachi-chem.co.jp> (last published July 2010).
Howarth, J., Jeschke, M., 2009. Advanced non-woven materials from recycled carbon fibre. In: Carbon Fibre Recycling and Reuse 2009 Conference, IntertechPira, Hamburg, Germany.
Hunter, T., 2009. A recycler’s perspective on recycling carbon fibre pre-preg production scrap. In: Carbon Fibre Recycling and Reuse 2009 Conference, IntertechPira, Hamburg, Germany.
Hyde, 2006, Supercritical propanol, a possible route to composite carbon fibre recovery: a viability study, Composites Part A, 37, 2171, 10.1016/j.compositesa.2005.12.006
Janicki, 2010. Janicki Industries Inc. Official website at: <www.janicki.com> (last accessed July 2010).
Janney, 2007, Fabrication of chopped fiber preforms by the 3-DEP process
Janney, 2009, Manufacturing complex geometry composites with recycled carbon fiber
JCMA, 2006. The Japan Carbon Fiber Manufacturers Association. Official website at: <www.carbonfiber.gr.jp> (last accessed July 2010).
Jiang, 2009, Characterisation of carbon fibres recycled from carbon fibre/epoxy resin composites using supercritical n-propanol, Compos. Sci. Technol., 69, 192, 10.1016/j.compscitech.2008.10.007
Jiang, 2007, Soft ionisation analysis of evolved gas for oxidative decomposition of an epoxy resin/carbon fibre composite, Thermochim. Acta, 454, 109, 10.1016/j.tca.2007.01.003
Jiang, 2008, Surface characterisation of carbon fibre recycled using fluidised bed, Appl. Surf. Sci., 254, 2588, 10.1016/j.apsusc.2007.09.105
Jody, 2004, A process to recover carbon fibers from polymer-matrix composites in end-of-life vehicles, JOM, 56, 43, 10.1007/s11837-004-0181-8
Karborek, 1999. Karborek S.p.a. Official website at: <www.karborek.it/fibra> (last accessed July 2010).
Kennerley, 1998, The characterisation and reuse of glass fibres recycled from scrap composites by the action of a fluidised bed process, Composites Part A, 29, 839, 10.1016/S1359-835X(98)00008-6
Kong, 2005, Structural investigation of composite wind turbine blade considering various load cases and fatigue life, Energy, 30, 2101, 10.1016/j.energy.2004.08.016
Kouparitsas, 2002, Recycling of the fibrous fraction of reinforced thermoset composites, Polym. Compos., 23, 682, 10.1002/pc.10468
Lester, 2004, Microwave heating as a means for carbon fibre recovery from polymer composites: a technical feasibility study, Mater. Res. Bull., 39, 1549, 10.1016/j.materresbull.2004.04.031
Lexus, 2009. Lexus LFA Press Information 2009. Toyota (GB) PLC – Lexus Division. Available online at: <www.toyota.co.jp/en> (last accessed July 2010).
Line, S., 2009. Commercialisation of the carbon fibre recycling process. In: Carbon Fibre Recycling and Reuse 2009 Conference, IntertechPira, Hamburg, Germany.
Liu, 2009, Recycling of carbon fibre reinforced composites using water in subcritical conditions, Mater. Sci. Eng. A, 520, 179, 10.1016/j.msea.2009.05.030
Marsh, 2005, Recycling collaborative combats legislation threat, Reinf. Plast., 49, 24, 10.1016/S0034-3617(05)70732-3
Marsh, 2008, Reclaiming value from post-use carbon composite, Reinf. Plast., 52, 36, 10.1016/S0034-3617(08)70242-X
Marsh, 2009, Carbon recycling: a soluble problem, Reinf. Plast., 53, 22, 10.1016/S0034-3617(09)70149-3
McConnel, 2010, Launching the carbon fibre recycling industry, Reinf. Plast., 54, 33, 10.1016/S0034-3617(10)70063-1
Menzolit, 2004a. Menzolit BMC 0400 Data Sheet. Menzolit GmbH. Available online at: <www.menzolit.com/templates/rhuk_solarflare_ii/pdf/list_bmc/BMC_0400.pdf> (last accessed July 2010).
Menzolit, 2004b. Menzolit BMC 1400 Data Sheet. Menzolit GmbH. Available online at: <www.menzolit.com/templates/rhuk_solarflare_ii/pdf/list_bmc/BMC_1400.pdf> (last accessed July 2010).
Menzolit, 2008. Menzolit SMC 1800 Data Sheet. Menzolit GmbH. Available online at: <www.menzolit.com/templates/rhuk_solarflare_ii/pdf/list_smc/SMC_1800.pdf> (last accessed July 2010).
Meredith, J., 2009. The role of recycled carbon fibre composites in motorsport applications. In: Carbon Fibre Recycling and Reuse 2009 Conference, IntertechPira, Hamburg, Germany.
Meyer, L.O., Schulte, K., Grove-Nielsen, E., 2007. Optimisation of a pyrolysis process for recycling of CFRP’s. In: ICCM-16, Japan Society for Composite Materials, Kyoto, Japan.
Meyer, 2009, CFRP-recycling following a pyrolysis route: process optimization and potentials, J. Compos. Mater., 43, 1121, 10.1177/0021998308097737
MIT, 2010. Materials Innovation Technologies, LLC. Official website at: <www.emergingmit.com> (last accessed July 2010).
Nakagawa, M., Shibata, K., Kuriya, H., 2009. Characterization of CFRP using recovered carbon fibers from waste CFRP. In: Second International Symposium on Fiber Recycling, The Fiber Recycling 2009 Organizing Committee, Atlanta, Georgia, USA.
NASA, 1991. F-18 HARV in flight. Available online at: <www1.dfrc.nasa.gov/Gallery/Photo/F-18HARV/Small/EC91-495-15.jpg> (last accessed July 2010).
Ogi, 2007, Mechanical properties of ABS resin reinforced with recycled CFRP, Adv. Compos. Mater., 16, 181, 10.1163/156855107780918982
Palmer, 2009, Successful closed-loop recycling of thermoset composites, Composites Part A, 40, 490, 10.1016/j.compositesa.2009.02.002
PAMELA, 2005. PAMELA Project. Official website at: <www.pamelalife.com> (last accessed July 2010).
PAMELA, 2008. PAMELA-Life: Main Results of the Project. Airbus S.A.S. Available online at: <www.pamelalife.com/english/results/PAMELA-Life-project_results-Nov08.pdf>.
Panesar, 2009, Converting composite waste into high quality reusable carbon fibre
Pickering, 2006, Recycling technologies for thermoset composite materials – current status, Composites Part A, 37, 1206, 10.1016/j.compositesa.2005.05.030
Pickering, S.J., 2009. Carbon fibre recycling technologies: what goes in and what comes out? In: Carbon Fibre Recycling and Reuse 2009 Conference, IntertechPira, Hamburg, Germany.
Pickering, 2000, A fluidised-bed process for the recovery of glass fibres from scrap thermoset composites, Compos. Sci. Technol., 60, 509, 10.1016/S0266-3538(99)00154-2
Pickering, 2010, Applications for recycled carbon fibre
Pickering, 2006, Moulding compound development using recycled carbon fibres
Pimenta, S., Pinho, S.T., Robinson, P., 2010b. Closing the loop: mechanical analysis and modelling of a multiscale recycled composite. In: ECCM-14, European Society of Composite Materials, Budapest, Hungary.
Pimenta, 2010, Mechanical analysis and toughening mechanisms of a multiphase recycled CFRP, Compos. Sci. Technol., 70, 1713, 10.1016/j.compscitech.2010.06.017
Pinero-Hernanz, 2008, Chemical recycling of carbon fibre reinforced composites in nearcritical and supercritical water, Composites Part A, 39, 454, 10.1016/j.compositesa.2008.01.001
Pinero-Hernanz, 2008, Chemical recycling of carbon fibre composites using alcohols under subcritical and supercritical conditions, J. Supercrit. Fluids, 46, 83, 10.1016/j.supflu.2008.02.008
Quadrant, 2007. C100F23-F1 Product Data Sheet. Quadrant Plastic Composites Inc. Available online at: <www.quadrantcomposites.com/files/cms1/DS_D100F23-F1.pdf> (last accessed July 2010).
Quadrant, 2010. Applications for Building and Construction. Quadrant Plastic Composites Inc. Available online at: <www.quadrantcomposites.com/English/page_14.aspx> (last accessed July 2010).
RCFL, 2009. Recycled Carbon Fibre Ltd. Official website at: <www.recycledcarbonfibre.com> (last accessed July 2010).
Roberts, 2007, Rapid growth forecast for carbon fibre market, Reinf. Plast., 51, 10, 10.1016/S0034-3617(07)70051-6
Roberts, 2009
Sloan, J., 2008. Carbon Fiber 2007 looks forward with optimism. In: High Performance Composites Carbon Fiber 2007 Conference Coverage, (Washington, DC, USA), Composites World, 5–7 December, 2007.
Strong, 1989
Szpieg, 2009, Recycled polypropylene aimed as composites precursor material, Plast. Rubber Compos., 38, 412, 10.1179/146580109X12540995045525
Szpieg, 2009, Reuse of polymer materials and carbon fibres in novel engineering composite materials, Plast. Rubber Compos., 38, 419, 10.1179/146580109X12540995045688
Takahashi, J., Matsutsuka, N., Okazumi, T., Uzawa, K., Ohsawa, I., Yamaguchi, K., Kitano, A., 2007. Mechanical properties of recycled CFRP by injection molding method. In: ICCM-16, Japan Society for Composite Materials, Kyoto, Japan.
Tarmac, 2010. Tarmac Aerosave S.A.S. Official website at: <www.tarmacaerosave.aero> (last accessed July 2010).
TFP, 2010. Technical Fibre Products Ltd. Official website at: <www.techfibres.com> (last accessed July 2010).
Turner, 2009, Development of high value composite materials using recycled carbon fibre
Warrior, N.A., Turner, T.A., Pickering, S.J., 2009. AFRECAR and HIRECAR Project results. In: Carbon Fibre Recycling and Reuse 2009 Conference, IntertechPira, Hamburg, Germany.
Wong, K.H., Pickering, S.J., Brooks, R., 2007a. Recycled carbon fibre reinforced polypropylene composites: effect of coupling agents on mechanical properties. In: Composites Innovation 2007 — Improved Sustainability and Environmental Performance, NetComposites, Barcelona, Spain.
Wong, K.H., Pickering, S.J., Turner, T.A., Warrior, N.A., 2007b. Preliminary feasibility study of reinforcing potential of recycled carbon fibre for flame-retardant grade epoxy composite. In: Composites Innovation 2007 – Improved Sustainability and Environmental Performance, NetComposites, Barcelona, Spain.
Wong, 2009, Compression moulding of a recycled carbon fibre reinforced epoxy composite
Wong, 2009, The potential for fibre alignment in the manufacture of polymer composites from recycled carbon fibre
Wood, 2010, Carbon fiber reclamation: going commercial, High Perform. Compos., 3, 1