Recyclability of bamboo polypropylene composites

Aurrekoetxea J, Sarrionandia MA, Urrutibeascoa I (2001a) Effects of recycling on the microstructure and the mechanical properties of isotactic polypropylene. J Mat Sci 36:2607–2613

Aurrekoetxea J, Sarrionandia MA, Urrutibeascoa I, Maspoch ML (2001b) Effects of recycling on the microstructure and the mechanical properties of isotactic polypropylene. J Mater Sci 36:2607–2613

Beg MDH, Pickering KL (2007) Recycling and its effects on the physical and mechanical properties of wood fibre reinforced polypropylene composites. Key Eng Mater 334–335:497–500

Beg MDH, Pickering K L (2008) Reprocessing of wood fibre reinforced polypropylene composites. Part II: Hygrothermal ageing and its effects. Compos Part A 39:1565–1571.

Costa HM, Ramos VD, Rocha MCG (2005) Rheological properties of polypropylene during multiple extrusion. Polym Test 24(1):86–93

Devasahayam S, Raju GB, Hussain CM (2019) Utilization and recycling of end of life plastics for sustainable and clean industrial processes including the iron steel industry. Mater Sci Energy Technol 2:634–646

Dickson AR, Sandquist D (2018) Mode of wood fibre breakage during thermoplastic melt processing. Compos Part A. https://doi.org/10.1016/j.compositesa.2018.07.004

Haq S, Srivastava R (2016) Wood Polypropylene (PP) Composites manufactured by mango wood waste with virgin or recycled pp: mechanical morphology. Melt flow index and crystalline behaviour. J Polym Environ. https://doi.org/10.1007/s10924-016-0845-9.

Hoang QT, Lagattu F, Brillaud J (2010) Natural fiber-reinforced recycled polypropylene: microstructural and mechanical properties. J Rein Plast Compos 29(2):209–217

Incarnato L, Scarfato P, Acierno D (1999) Rheological and mechanical properties of recycled polypropylene. Polym Eng Sci 39(4).

Martikka O, Kärki T (2019) Promoting recycling of mixed waste polymers in wood-polymer composites using compatibilizers. Recycling 4:6

Matei E, Râpâ M, Andras AA, Predescu AM et al (2017) Recycled polypropylene improved with thermoplastic elastomers. Int J Polym Sci. https://doi.org/10.1155/2017/7525923

Nourbakhsh A, Ashori A (2009) Preparation and properties of wood plastic composites made of recycled high-density polyethylene. J Compos Mater 43:877–883

Shangguan W, Gong Y, Zhao R et al (2016) Effect of heat treatment on the properties of bamboo scrimber. J Wood Sci 62:383–391

Suharty NS, Ismail H, Diharjo K et al (2019) Blend of recycle polypropylene/kenaf fiber/recycle natural rubber/montmorillonite: the effect of natural rubber plasticizer against tensile strength and burning rate properties of smart composites. IOP Conf Series Mater Sci Eng 509:012097

Turku I, Karki T, Puurtinen A (2018) Durability of wood plastic composites manufactured from recycled plastic. Heliyon, 4.

Winandy J E, Stark N M, Clemons C M (2004) Considerations in recycling of wood-plastic composites. In: 5th Global wood and natural fibre composites symposium.

Zdiri K, Elamri A, Hamdaoui M et al (2018) Reinforcement of recycled PP polymers by nanoparticles incorporation. Green Chem Lett Rev 11(3):296–311

Zoé O, Schyns G, Shaver MP (2021) Mechanical recycling of packaging plastics: a review. Macromol Rapid Commun 42:2000415