Recovery of waste Li foils from spent experimental Li-anode coin cells for LiFePO4/C cathode

Kraytsberg, 2011, Review on Li–air batteries—opportunities, limitations and perspective, J. Power Sources, 196, 886, 10.1016/j.jpowsour.2010.09.031 Pan, 2016, Improved cycling stability of lithium–Sulphur batteries by enhancing the retention of active material with a sandwiched hydrothermally treated graphite film, RSC Adv., 6, 34131, 10.1039/C6RA01033D Kolosnitsyn, 2015, On the reasons for low sulphur utilization in the lithium–sulphur batteries, J. Power Sources, 274, 203, 10.1016/j.jpowsour.2014.10.029 Yao, 2014, Improving lithium-Sulphur batteries through spatial control of sulphur species deposition on a hybrid electrode surface, Nat. Commun., 5, 3943, 10.1038/ncomms4943 Jana, 2015, Dendrite-separator interactions in lithium-based batteries, J. Power Sources, 275, 912, 10.1016/j.jpowsour.2014.11.056 Balakrishnan, 2006, Safety mechanisms in lithium-ion batteries, J. Power Sources, 155, 401, 10.1016/j.jpowsour.2005.12.002 Hirose, 2007, Glass–ceramics with LiFePO4 crystals and crystal line patterning in glass by yag laser irradiation, Solid State Ionics, 178, 801, 10.1016/j.ssi.2007.03.003 Burch, 2009, Size-dependent spinodal and miscibility gaps for intercalation in nanoparticles, Nano Lett., 9, 3795, 10.1021/nl9019787 Sanchez, 2006, Synthesis and characterization of LiFePO4 prepared by sol–gel technique, Solid State Ionics, 177, 497, 10.1016/j.ssi.2005.11.018 Yu, 2009, Reaction mechanism and electrochemical performance of LiFePO4/C cathode materials synthesized by carbothermal method, Electrochim. Acta, 54, 7389, 10.1016/j.electacta.2009.07.071 Ou, 2008, LiFePO4 doped with magnesium prepared by hydrothermal reaction in glucose solution, Chin. Chem. Lett., 19, 345, 10.1016/j.cclet.2007.10.052 Zhang, 2014, Facile synthesis of nitrogen-doped carbon derived from polydopamine-coated Li3V2(PO4)3 as cathode material for lithium-ion batteries, RSC Adv., 4, 38791, 10.1039/C4RA05089D Li, 2015, Enhancement of electrochemical performances for LiFePO4/C with 3D-grape-bunch structure and selection of suitable equivalent circuit for fitting EIS results, J. Power Sources, 291, 75, 10.1016/j.jpowsour.2015.05.018 Gao, 2015, Surfactant-assisted sol-gel synthesis of nanostructured ruthenium-doped lithium iron phosphate as a cathode for lithium-ion batteries, ChemElectroChem., 1, 2146, 10.1002/celc.201402247 Wei, 2011, Large-pore ordered mesoporous carbons with tunable structures and pore sizes templated from poly(ethylene oxide)--poly(methyl methacrylate), Solid State Sci., 13, 784, 10.1016/j.solidstatesciences.2010.03.008 Morishige, 2008, Adsorption hysteresis in ordered mesoporous silicas, Adsorption, 14, 157, 10.1007/s10450-007-9086-5 Zheng, 2015, Solvothermal synthesis and electrochemical performance of hollow LiFePO4 nanoparticles, J. Alloys Compd., 640, 95, 10.1016/j.jallcom.2015.04.007 Mat, 2016, Effect of citric acid on the performance of LiFePO4 as a cathode material for lithium batteries, Ionics, 22, 135, 10.1007/s11581-015-1607-8 Padhi, 1997, Phospho-olivines as positive-electrode materials for rechargeable lithium batteries, J. Electrochem. Soc., 144, 1188, 10.1149/1.1837571 Liu, 2008, Synthesis and characterization of nano-LiFePO4/carbon composite cathodes from 2-methoxyethanol–water system, J. Alloys Compd., 459, 521, 10.1016/j.jallcom.2007.05.031 Xun, 2016, Synthesis and characterization of sulfur-doped carbon decorated LiFePO4, nanocomposite as high performance cathode material for lithium-ion batteries, Ceram. Int., 42, 5331, 10.1016/j.ceramint.2015.12.064 Li, 2015, Facile and nonradiation pretreated membrane as a high conductive separator for Li-ion batteries, ACS Appl. Mater. Interfaces, 7, 20184, 10.1021/acsami.5b05718 Li, 2016, Preparation, morphology and electrochemical performances of LiFePO4-expanded graphite composites as the positive material for Li-ion capacitor application in aqueous neutral electrolyte, J. Mater. Sci., 27, 4417 Fathollahi, 2015, Improved electrochemical properties of LiFePO4/graphene cathode nanocomposite prepared by one-step hydrothermal method, J. Alloys Compd., 627, 146, 10.1016/j.jallcom.2014.12.025 Gao, 2017, Microwave-assisted synthesis and surface decoration of LiFePO4, hexagonal nanoplates for lithium-ion batteries with excellent electrochemical performance, J. Mater. Sci., 52, 1590, 10.1007/s10853-016-0453-z Meng, 2015, Reassessment of the roles of Ag in TiO2 nanotubes anode material for lithium-ion battery, Ceram. Int., 41, 9988, 10.1016/j.ceramint.2015.04.079 Dhindsa, 2016, Enhanced electrochemical performance of LiFePO4/C nanocomposites due to in situ formation of Fe2P impurities, J. Solid State Electrochem., 20, 2275, 10.1007/s10008-016-3239-y Prosini, 2002, Determination of the chemical diffusion coefficient of lithium in LiFePO4, Solid State Ionics, 148, 45, 10.1016/S0167-2738(02)00134-0