Recovering cutting tool modal parameters from fractionally uncorrelated and potentially aliased signals

Iglesias, 2022, Alternative Experimental Methods for Machine Tool Dynamics Identification: A Review, Mechanical Systems and Signal Processing, 170, 10.1016/j.ymssp.2022.108837 Yang, 2015, Output-only Modal Identification by Compressed Sensing: Non-uniform Low-rate Random Sampling, Mechanical Systems and Signal Processing, 56–57, 15, 10.1016/j.ymssp.2014.10.015 Pang, 2018, A Random Demodulation Architecture for Sub-sampling Acoustic Emission Signals in Structural Health Monitoring, Journal of Sound and Vibration, 431, 390, 10.1016/j.jsv.2018.06.021 Gkoktsi, 2019, A Multi-sensor Sub-nyquist Power Spectrum Blind Sampling Approach for Low-power Wireless Sensors in Operational Modal Analysis Applications, Mechanical Systems and Signal Processing, 116, 879, 10.1016/j.ymssp.2018.06.049 Yang, 2017, Blind Identification of Full-field Vibration Modes of Output-only Structures from Uniformly-sampled, Possibly Temporally-aliased (Sub-Nyquist), Video Measurements, Journal of Sound and Vibration, 390, 232, 10.1016/j.jsv.2016.11.034 Martinez, 2020, Sparse and Random Sampling Techniques for High-Resolution, Full-Field, BSS-Based Structural Dynamics Identification from Video, Sensors, 20, 3526, 10.3390/s20123526 Law, 2020, Modal Analysis of Machine Tools Using Visual Vibrometry and Output-Only Methods, CIRP Annals Manufacturing Technology, 69, 357, 10.1016/j.cirp.2020.04.043 Gupta, 2021, Vision-based Modal Analysis of Cutting Tools, CIRP Journal of Manufacturing Science and Technology, 32, 91, 10.1016/j.cirpj.2020.11.012 Gupta, 2021, Evaluating Tool Point Dynamics Using Smartphone-based Visual Vibrometry, Procedia CIRP, 101, 250, 10.1016/j.procir.2020.09.196 Huang, 2022, Vision-based Vibration Measurement of Machine Tool, Journal of Advanced Mechanical Design, Systems, and Manufacturing, 16 Bhowmick, 2022, Spatiotemporal Compressive Sensing of Full-field Lagrangian Continuous Displacement Response from Optical Flow of Edge: Identification of Full-field Dynamic Modes, Mechanical Systems and Signal Processing, 164, 10.1016/j.ymssp.2021.108232 Law, 2022, Modal Parameter Recovery from Temporally Aliased Video Recordings of Cutting Tools, CIRP Annals Manufacturing Technology, 71, 10.1016/j.cirp.2022.03.023 Brunton, 2019 Barone, 2019, Low-frame-rate Single Camera System for 3D Full-field High-frequency Vibration Measurements, Mechanical Systems and Signal Processing, 123, 143, 10.1016/j.ymssp.2019.01.016 Liu, 2017, Research of Under-Sampling Technique for Digital Image Correlation in Vibration Measurement, Shock and Vibration, Aircraft/Aerospace, Energy Harvesting, Acoustics & Optics, 9, 49, 10.1007/978-3-319-54735-0_6 Wang, 2020, Reconstruction of Periodic Band Limited Signals from Non-Uniform Samples with Sub-Nyquist Sampling Rate, Sensors, 20, 6246, 10.3390/s20216246 Hosking, 2006 Juang, 1985, An Eigensystem Realization Algorithm for Modal Parameter Identification and Model Reduction, Journal of Guidance, Control and Dynamics, 8, 5, 10.2514/3.20031 Gupta, 2020, Evaluating Tool Point Dynamics Using Output-only Modal Analysis with Mass-change Methods, CIRP Journal of Manufacturing Science and Technology, 31, 251, 10.1016/j.cirpj.2020.06.001 Bansal, 2018, A Receptance Coupling Approach to Optimally Tune and Place Absorbers on Boring Bars for Chatter Suppression, Procedia CIRP, 77, 167, 10.1016/j.procir.2018.08.267 Hagerdorn, 2007