Reconfigurable Manufacturing Systems

Hardt, 1997

Koren, Y., Ulsoy, A. G., 1997, Reconfigurable Manufacturing Systems, Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS) Report #1, The University of Michigan, Ann Arbor, MI.

Matta, M., Tolio T., 1999, Flexible and Productive Manufacturing System Architecture. The 15th Int. Conf. on Production Research, August, Limerick, Ireland.

Ulsoy, A. G., Heytler, P., 1998, A Survey of Flexible and Reconfigurable Manufacturing Systems, Report # 11, Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS), The University of Michigan, Ann Arbor, MI.

Koren, Y., Jovane, F., G. Pritschow (Eds.), 1998, Open Architecture Control Systems, Summary of Global Activity, ITIA Series, Vol. 2., Milano, Italy.

Mehrabi, M. G., Ulsoy, A. G., 1997, State-of-the-Art in Reconfigurable Manufacturing Systems, Report # 2, Vol. I and Vol. II, Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS), The University of Michigan, Ann Arbor, MI.

Aronson, 1997, 108

AMT (Association for Manufacturing Technology) Report, 1996, A Technology Road Map for the Machine-Tool Industry

Ashley, 1997, 70

Garro, 1993, Towards New Architecture of Machine Tools, Int. J. Prod. Research, 31, 2403, 10.1080/00207549308956865

Rogers, 1997, Modular Production Systems: A New Manufacturing Paradigm, Journal of Intelligent Manufacturing, Vol. 8, 147, 10.1023/A:1018560922013

Koren, 1983

Atkins W. S. Management Consultants, 1990, Strategic Study on the EU Machine Tool Sector

Heisel, 1998, Rekonfigurierbare Werkzeugmaschinen, ZwF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 93, 506, 10.1515/zwf-1998-0281

Pritschow, 1993, Open System Controllers - A Challenge for the Future of the Machine Tool Industry, Annals of the CIRP, 42, 449, 10.1016/S0007-8506(07)62483-4

Van Brussel, 1998, Robust Control of Feed Drives with Linear Motors, Annals of the CIRP, 47, 325, 10.1016/S0007-8506(07)62843-1

Koren Y., Kota, S., 1999, Reconfigurable Machine Tools, U.S. Patent No. 5,943,750

Paredis, C., et al., 1996, A Rapidly Deployable Manipulator System, Proc. IEEE ICRA, pp. 1434–1439.

Fukuda, T., Ueyama, T., 1993, Autonomous Behavior and Control,' Proc. IEEE ICRA.

IMS Report, 1990, Joint International Research Programs into an Intelligent Manufacturing System, International Robotics and Factory Automation Centre (IROFA).

Bollinger, 1998

Lee, 1997, Reconfigurability Considerations in the Design of Components and Manufacturing Systems, International Journal of Advanced Manufacturing Technology, 13, 376, 10.1007/BF01178258

Thielemans, 1996, HEDRA: Heterogeneous Distributed Real-time Architecture, Control Engineering Practice, 4, 187, 10.1016/0967-0661(95)00225-1

Heisel, 1998, Auslegung von Maschinenstrukturen mit Gelenkstab-Kinematik, WT Werkstattstechnik, 88, 183

Mehrabi, 1998, Future Trends in Manufacturing: A Survey of Flexible and Reconfigurable Manufacturing Systems, Submitted to J. of Manufacturing Systems

Eversheim, 1989

Sethi, 1990, Flexibility in Manufacturing: a survey, Int. J. Of Flexible Manufacturing Systems, Vol. 2, 289, 10.1007/BF00186471

Grieco, 1995, Simulation of Tool and Part Flow in FMSs, International Journal of Production Research, 33, 643, 10.1080/00207549508930171

Chryssolouris, 1996, Flexibility and Its Measurement, Annals of the CIRP, 45, 581, 10.1016/S0007-8506(07)60512-5

Koren, 1998, Impact of Manufacturing System Configuration on Performance, Annals of the CIRP, 47, 369, 10.1016/S0007-8506(07)62853-4

Tolio, 1998, A Method for Performance Evaluation of Automated Flow Lines, Annals of the CIRP, 47, 373, 10.1016/S0007-8506(07)62854-6

Németh, I., Fisette, P., and Van Brussel, H., 1999, Conceptual design of 3-axis machine tools, Proc. 32nd CIRP Intl. Seminar on Manufacturing Systems, Leuven, pp. 239–248.

Tönshoff, H. K., Menzel, E., Hinkenhuis, H., Nitidem, E., 1994, Intelligence in Machine Tools by Configuration, 7th Int. Conference on Production / Precision Engineering, 4th Int. Conference on High Technology, September 1994, Chiba, Japan.

Erixon, 1996, Modularity - the basis for Product and Factory Re-engineering, Annals of the CIRP, 45, 1, 10.1016/S0007-8506(07)63005-4

Pasek, Z. J., et al., OpenFront: System-Level Software for Configuration and Control of Manufacturing Systems, Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS) Report #21, The University of Michigan, Ann Arbor, MI.

Shamoto, 1997, Rigid XY Table for Ultaprecision Machine Tool Driven by Means of Waling Drive, Annals of the CIRP, 46, 301, 10.1016/S0007-8506(07)60830-0

Heisel, 1995, Forderung an Hochgeschwindigkeitsmaschinen, Wt-Produktion und Management, 155

Pritschow, 1998

Heisel, 1998

Weck, 1998

Kieser, 1997, In der Werkzeugmaschinentechnik bricht eine neue Aera an, Industrie Anzeiger, 22, 38

Kota, S., 1999, Design of Reconfigurable Machine Tools, Proc. 32nd CIRP Intl. Seminar on Manufacturing Systems, May, Leuven, Belgium, pp. 297–303.

Pritschow, 1997, Modular System Platform for Open Control Systems, Production Engineering, 4

Lutz, 1997

Koren, 1996, Real-Time Open Control Architectures and System Performance, Annals of the CIRP, 45, 377, 10.1016/S0007-8506(07)63084-4

Sperling W. et al, 1996, “OSACA ESPRIT 6379/9115 Final Report,” FISW GmbH, Stuttgart, Germany.

HÜMNOS, 1998

Spath, 1999, ACCOMAT - Die genauigkeitsgeregelte Maschine, Wt-Werkstattstechnik, 89, 235

Hu, 1997, Stream of Variation Theory for Automotive Body Assembly, Annals, of the CIRP, 46, 1, 10.1016/S0007-8506(07)60763-X

Boër, 1996, Towards a New Model of Sustainable Production: ManuFuturing, Annals of the CIRP, 45, 415, 10.1016/S0007-8506(07)63093-5

Jovane, F., 1998, Concepts for Strategic Machinery Innovation, Initial Meeting of ARMMS Networks, Bruselles - December.