Recent research advances on the dynamic analysis of composite shells: 2000–2009

Composite Structures - Tập 93 Số 1 - Trang 14-31 - 2010
Mohamad S. Qatu1, Rani W. Sullivan2, Wenchao Wang1
1Department of Mechanical Engineering, Mississippi State University, Mississippi State, MS, 39762, United States
2Department of Aerospace Engineering, Mississippi State University, Mississippi State, MS 39762, United States

Tóm tắt

Từ khóa


Tài liệu tham khảo

Qatu, 2004

Qatu, 2002, Recent research advances in the dynamic behavior of shells, part 1: laminated composite shells, Appl Mech Rev, 55, 325, 10.1115/1.1483079

Qatu, MS. Free vibration and static analysis of laminated composite shallow shells. PhD Dissertation, Ohio State University; 1989.

Qatu, 1992, Review of shallow shell vibration research, Shock Vib Dig, 24, 3, 10.1177/058310249202400903

Qatu, 1999, Accurate theory for laminated composite deep thick shells, Int J Solids Struct, 36, 2917, 10.1016/S0020-7683(98)00134-6

Leissa AW. Vibration of shells. NASA SP388. The Government Printing Office, Washington, DC; 1973. [Republished 1993, the Acoustical Society of America].

Kapania, 1989, Review on the analysis of laminated shells, J Pressure Vessel Technol, 111, 88, 10.1115/1.3265662

Noor, 1990, Assessment of computational models for multilayered composite shells, Appl Mech Rev, 43, 67, 10.1115/1.3119162

Noor, 1992, Computational models for high-temperature multilayered composite plates and shells, Appl Mech Rev, 45, 419, 10.1115/1.3119742

Noor, 1991, Assessment of computational models for multilayered composite cylinders, Int J Solids Struct, 27, 1269, 10.1016/0020-7683(91)90162-9

Liew, 1997, Vibration of shallow shells: a review with bibliography, Appl Mech Rev, 50, 431, 10.1115/1.3101731

Soldatos, 1999, Mechanics of cylindrical shells with non-circular cross-section, Appl Mech Rev, 52, 237, 10.1115/1.3098937

Noor, 1996, Computational models for sandwich panels and shells, Appl Mech Rev, 49, 155, 10.1115/1.3101923

Noor, 1992, High-performance computing for flight vehicles, Comput Syst Eng, 3, 1

Carrera, 2003, Historical review of zig-zag theories for multilayered plates and shells, Appl Mech Rev, 56, 287, 10.1115/1.1557614

Carrera, 2002, Theories and finite elements for multilayered, anisotropic, composite plates and shells, J Arch Comput Methods Eng, 9, 87, 10.1007/BF02736649

Soedel, 2004

Reddy, 2003

Ye, 2003

Lee, 2008

Shen, 2009

Santos, 2008, A finite element model for the analysis of 3D axisymmetric laminated shells with piezoelectric sensors and actuators: bending and free vibrations, Comput Struct, 86, 940, 10.1016/j.compstruc.2007.04.013

Santos, 2006, A finite element model for the analysis of 3D axisymmetric laminated shells with piezoelectric sensors and actuators, Compos Struct, 75, 170, 10.1016/j.compstruct.2006.04.008

Shakeri, 2006, Dynamic analysis of thick laminated shell panel with piezoelectric layer based on three dimensional elasticity solution, Comput Struct, 84, 1519, 10.1016/j.compstruc.2006.01.039

Malekzadeh, 2009, Three-dimensional dynamic analysis of laminated composite plates subjected to moving load, Compos Struct, 90, 105, 10.1016/j.compstruct.2009.02.008

Saviz, 2007, Electrostatic fields in a layered piezoelectric cylindrical shell under dynamic load, Smart Mater Struct, 16, 1683, 10.1088/0964-1726/16/5/022

Toorani, 2001, Shear deformation in dynamic analysis of anisotropic laminated open cylindrical shells filled with or subjected to a flowing fluid, Comput Methods Appl Mech Eng, 190, 4929, 10.1016/S0045-7825(00)00357-1

Dong, 2007, The effect of transverse shear, rotary inertia on wave propagation in laminated piezoelectric cylindrical shells in thermal environment, J Reinforc Plast Compos, 26, 1523, 10.1177/0731684407079519

Ribeiro, 2009, On the influence of membrane inertia and shear deformation on the geometrically nonlinear vibrations of open, cylindrical, laminated clamped shells, Compos Sci Technol, 69, 176, 10.1016/j.compscitech.2008.09.038

Qatu, 2004, Theory and vibration analysis of laminated barrel thick shells, J Vib Control, 10, 319, 10.1177/1077546304031845

Wang, 2002, Stress wave propagation in orthotropic laminated thick-walled spherical shells, Int J Solids Struct, 39, 4027, 10.1016/S0020-7683(02)00264-0

Ding, 2005, The thermoelastic dynamic response of thick closed laminated shell, Shock Vib, 12, 283, 10.1155/2005/479794

Ganapathi, 2003, Free vibrations of thick laminated anisotropic non-circular cylindrical shells, Compos Struct, 60, 125, 10.1016/S0263-8223(02)00339-2

Ganapathi, 2002, Dynamic analysis of laminated cross-ply composite non-circular thick cylindrical shells using higher-order theory, Int J Solids Struct, 39, 5945, 10.1016/S0020-7683(02)00495-X

Khare, 2005, Higher-order closed-form solutions for thick laminated sandwich shells, J Sandwich Struct Mater, 7, 335, 10.1177/1099636205050260

Balah, 2005, Energy–momentum conserving algorithm for nonlinear dynamics of laminated shells based on a third-order shear deformation theory, J Eng Mech, 131, 12, 10.1061/(ASCE)0733-9399(2005)131:1(12)

Pinto Correia, 2003, Analysis of laminated conical shell structures using higher order models, Compos Struct, 62, 383, 10.1016/j.compstruct.2003.09.009

Qian, 2003, Active vibration control of composite laminated cylindrical shells via surface-bonded magnetostrictive layers, Smart Mater Struct, 12, 889, 10.1088/0964-1726/12/6/005

Lam, 2000, Vibration analysis of thick laminated composite cylindrical shells, AIAA J, 38, 1102, 10.2514/2.1077

Braga, 2005, High-frequency response of isotropic-laminated cylindrical shells modeled by a layer-wise theory, Int J Solids Struct, 42, 4278, 10.1016/j.ijsolstr.2004.06.062

Basar, 2000, Free-vibration analysis of thin/thick laminated structures by layer-wise shell models, Comput Struct, 74, 409, 10.1016/S0045-7949(99)00061-9

Lee, 2002, Dynamic characteristics of cylindrical composite panels with Co-cured and constrained viscoelastic layers, JSME Int J, Ser C: Mech Syst, Mach Elem Manuf, 45, 16, 10.1299/jsmec.45.16

Moreira, 2006, A generalized layerwise finite element for multi-layer damping treatments, Comput Mech, 37, 426, 10.1007/s00466-005-0714-1

Oh, 2007, Dynamic characteristics of cylindrical hybrid panels containing viscoelastic layer based on layerwise mechanics, Composites Part B: Eng, 38, 159, 10.1016/j.compositesb.2006.07.002

Oh, 2009, Damping characteristics of cylindrical laminates with viscoelastic layer considering temperature- and frequency-dependence, J Therm Stresses, 32, 1, 10.1080/01495730802539983

Oh, 2006, Vibration analyses of cylindrical hybrid panel with viscoelastic layer based on layerwise finite elements, Key Eng Mater, 324–325, 699, 10.4028/www.scientific.net/KEM.324-325.699

Saravanan, 2000, Analysis of active damping in composite laminate cylindrical shells of revolution with skewed PVDF sensors/actuators, Compos Struct, 48, 305, 10.1016/S0263-8223(99)00118-X

Saravanos, 2002, Low-energy impact of adaptive cylindrical piezoelectric-composite shells, Int J Solids Struct, 39, 2257, 10.1016/S0020-7683(02)00087-2

Shin, 2006, Aeroelastic characteristics of cylindrical hybrid composite panels with viscoelastic damping treatments, J Sound Vib, 296, 99, 10.1016/j.jsv.2006.01.068

Varelis, 2006, Coupled mechanics and finite element for nonlinear laminated piezoelectric shallow shells undergoing large displacements and rotations, Int J Numer Methods Eng, 66, 1211, 10.1002/nme.1590

Wang, 2001, Vibration and transverse stresses of laminated cylindrical shells, Chin J Appl Mech (Ying Yong Li Xue Xue Bao), 18, 34

Ray, 2004, Optimal control of thin circular cylindrical laminated composite shells using active constrained layer damping treatment, Smart Mater Struct, 13, 64, 10.1088/0964-1726/13/1/008

Evseev, 2001, Aeroelastic interaction of the shock waves with the thin-walled composite shells, Compos Shells, 54, 153, 10.1016/S0263-8223(01)00084-8

Li, 2009, Transient vibrations of laminated composite cylindrical shells exposed to underwater shock waves, Eng Struct, 31, 738, 10.1016/j.engstruct.2008.11.018

Ruotolo, 2001, A comparison of some thin shell theories used for the dynamic analysis of stiffened cylinders, J Sound Vib, 243, 847, 10.1006/jsvi.2000.3447

Civalek, 2006, Free vibration analysis of composite conical shells using the discrete singular convolution algorithm, Steel Compos Struct, 6, 353, 10.12989/scs.2006.6.4.353

Civalek, 2007, Numerical analysis of free vibrations of laminated composite conical and cylindrical shells: discrete singular convolution (DSC) approach, J Comp Appl Math, 205, 251, 10.1016/j.cam.2006.05.001

Sakiyama, 2002, vol. 4

Hu, 2002, Vibration of twisted laminated composite conical shells, Int J Mech Sci, 44, 1521, 10.1016/S0020-7403(02)00068-1

Lee, 2003, Free vibrations of laminated composite cylindrical shells with an interior rectangular plate, J Sound Vib, 265, 795, 10.1016/S0022-460X(02)01236-1

Kim, 2002, Transient analysis of ring-stiffened composite cylindrical shells with both edges clamped, J Sound Vib, 252, 1, 10.1006/jsvi.2001.4020

Shang, 2001, An exact analysis for free vibration of a composite shell structure-hermetic capsule, Appl Math Mech, 22, 1035, 10.1023/A:1016312309324

Krejaa, 2006, Large rotations in first-order shear deformation FE analysis of laminated shells, Int J Non-lin Mech, 1, 101, 10.1016/j.ijnonlinmec.2005.06.009

Abea, 2007, Nonlinear dynamic behaviors of clamped laminated shallow shells with one-to-one internal resonance, J Sound Vib, 304, 957, 10.1016/j.jsv.2007.03.009

Wang, 2007, Nonlinear dynamic response and buckling of laminated cylindrical shells with axial shallow groove based on a semi-analytical method, J Shanghai University, 11, 223, 10.1007/s11741-007-0306-1

Zhou, 2001, Nonlinear theory of dynamic stability for laminated composite cylindrical shells, Appl Math Mech, 22, 53, 10.1023/A:1015574917134

Kundu, 2006, Nonlinear transient analysis of laminated composite shells, J. Reinforc Plast Compos, 25, 1129, 10.1177/0731684406065196

Swamy, 2006, Nonlinear transient analysis of laminated composite shells in hygrothermal environments, Compos Struct, 72, 280, 10.1016/j.compstruct.2004.12.001

Lomboy, 2007, A co-rotational 8-node resultant shell element for progressive nonlinear dynamic failure analysis of laminated composite structures, Mech Adv Mater Struct, 14, 89, 10.1080/15376490600675299

Fuhui, 2008, Analysis of fatigue delamination growth for piezoelectric laminated cylindrical shell considering nonlinear contact effect, Int J Solids Struct, 45, 5381, 10.1016/j.ijsolstr.2008.05.031

Balah M. Analysis of laminated general shells undergoing finite rotations and large motion. PhD Thesis, KFUPM, Saudi Arabia; 2000.

Amabili, 2003, A comparison of shell theories for large-amplitude vibrations of circular cylindrical shells: Lagrangian approach, J Sound Vib, 264, 1091, 10.1016/S0022-460X(02)01385-8

Pinto Correia, 2006, Modelling and optimization of laminated adaptive shells of revolution, Compos Struct, 75, 49, 10.1016/j.compstruct.2006.04.003

Dong, 2006, Wave propagation in piezoelectric laminated cylindrical shells under large deformations and rotary inertias, J Mech Eng Sci, 220, 1537, 10.1243/0954406JMES159

Dong, 2007, Wave propagation characteristics in piezoelectric cylindrical laminated shells under large deformation, Compos Struct, 77, 171, 10.1016/j.compstruct.2005.06.011

Thamburaj, 2001, Modal analysis of a non-circular cylindrical laminated shell using conformal mapping, J Sand Struct Mater, 3, 50, 10.1106/GLMV-N1EM-Y6DF-E3NV

Shakeri, 2005, Optimal stacking sequence of laminated cylindrical shells using genetic algorithm, Mech Adv Mater Struct, 12, 305, 10.1080/15376490590898501

Fan, 2008, On the durable critic load in creep buckling of viscoelastic laminated plates and circular cylindrical shells, Sci China Ser G – Phys Mech Astron, 51, 873, 10.1007/s11433-008-0091-9

Han, 2002, On determination of the material constants of laminated cylindrical shells based on an inverse optimal approach, Inverse Probl Eng, 10, 309, 10.1080/10682760290024436

Liew, 2006, Dynamic stability analysis of composite laminated cylindrical shells via the mesh-free kp-Ritz method, Comput Methods Appl Mech Eng, 196, 147, 10.1016/j.cma.2006.02.007

Yang, 2007, Analysis of dynamic stability for composite laminated cylindrical shells with delaminations, Compos Struct, 78, 309, 10.1016/j.compstruct.2005.10.004

Krishnamurthy, 2003, Impact response and damage in laminated composite cylindrical shells, Compos Struct, 59, 15, 10.1016/S0263-8223(02)00238-6

Krishnamurthy, 2001, A parametric study of the impact response and damage of laminated cylindrical composite shells, Compos Sci Technol, 61, 1655, 10.1016/S0266-3538(01)00015-X

Dong, 2006, Influences of large deformation and rotary inertia on wave propagation in piezoelectric cylindrically laminated shells in thermal environment, Int J Solids Struct, 43, 1710, 10.1016/j.ijsolstr.2005.05.044

Toorani, 2003, Dynamics of the geometrically nonlinear analysis of anisotropic laminated cylindrical shells, Int J Non-lin Mech, 38, 1315, 10.1016/S0020-7462(02)00073-2

Tzou, 2002, Dynamics and distribution control of conical shells laminated with full and diagonal actuators, J Sound Vib, 256, 65, 10.1006/jsvi.2001.4199

Aksogan, 2002, The dynamic stability of a laminated truncated conical shell with variable elasticity moduli and densities subject to a time-dependent external pressure, J Strain Anal, 37, 201, 10.1243/0309324021514961

Wu, 2002, Thermally induced dynamic instability of laminated composite conical shells, Int J Solids Struct, 39, 3001, 10.1016/S0020-7683(02)00234-2

Mamalis, 1997, Analytical modelling of the static and dynamic axial collapse of thin-walled fiberglass composite conical shells, Int J Impact Eng, 19, 477, 10.1016/S0734-743X(97)00007-9

Sofiyev, 2009, The vibration and stability behavior of freely supported FGM conical shells subjected to external pressure, Compos Struct, 89, 356, 10.1016/j.compstruct.2008.08.010

Senthil, 2008, Dynamic analysis of conical shells conveying fluid, J Sound Vib, 310, 38, 10.1016/j.jsv.2007.07.020

Dai, 2005, Stress wave propagation in laminated piezoelectric spherical shells under thermal shock and electric excitation, Eur J Mech A/Solids, 24, 263, 10.1016/j.euromechsol.2004.09.007

Lellep, 2002, Optimization of clamped plastic shallow shells subjected to initial impulsive loading, Eng Optim, 34, 545, 10.1080/03052150214014

Ganapathi, 2007, Dynamic stability characteristics of functionally graded materials shallow spherical shells, Compos Struct, 79, 338, 10.1016/j.compstruct.2006.01.012

Park, 2009, Parametric instability of delaminated composite spherical shells subjected to in-plane pulsating forces, Compos Struct, 91, 196, 10.1016/j.compstruct.2009.05.001

Zang, 2000, Nonlinear dynamic buckling of laminated composite shallow spherical shells, Compos Sci Technol, 60, 2361, 10.1016/S0266-3538(00)00031-2

Guo, 2006, Nonlinear random response of laminated composite shallow shells using finite element modal method, Int J Numer Methods Eng, 67, 1467, 10.1002/nme.1672

Korhevskaya, 2006, Free vibrations of a laminated cylindrical shell subjected to nonuniformly distributed axial forces, Mech Solids, 41, 130

Toorani, 2006, Free vibrations of non-uniform composite cylindrical shells, Nucl Eng Des, 236, 1748, 10.1016/j.nucengdes.2006.01.004

Umur, 2005, Free vibrations of bonded single lap joints in composite, shallow cylindrical shell panels, AIAA J, 43, 2537, 10.2514/1.14317

Singh, 2000, Linear and geometrically nonlinear vibrations of fiber reinforced laminated plates and shallow shells, Comput Struct, 76, 277, 10.1016/S0045-7949(99)00155-8

Hu, 2001, Maximizations of fundamental frequency of laminated truncated conical shells with respect to fiber orientation, Compos Struct, 52, 265, 10.1016/S0263-8223(01)00019-8

Timarchi, 2000, Vibrations of angle-ply laminated circular cylindrical shells subjected to different sets of edge boundary conditions, J Eng Math, 37, 211, 10.1023/A:1004794513444

Topal U. Mode-frequency analysis of laminated spherical shell. In: Proceedings of the 2006 IJME. INTERTECH International Conference- Session ENG P501-001, Kean University, NJ; 19–21 October 2006.

Tizzi, 2006, A Ritz procedure for optimisation of cylindrical shells, formed by a nearly symmetric and balanced angle-ply composite laminate, with fixed minimum frequency, Comput Struct, 84, 2159, 10.1016/j.compstruc.2006.08.045

Ferreira, 2007, Natural frequencies of FSDT cross-ply composite shell by multiquadrics, Compos Struct, 77, 296, 10.1016/j.compstruct.2005.07.009

Iqbal, 2010, Transverse vibration of circular two-segment composite shafts, Compos Struct, 92, 1126, 10.1016/j.compstruct.2009.10.007

Tetsuya, 2000, Simplified analytical method for calculation of natural frequencies of laminated composite cylindrical shells using equivalent curvature, Reports of the Tokyo Metropolitan Technical College, 35, 25

Zhang, 2002, Parametric analysis of frequency of rotating laminated composite cylindrical shells with the wave propagation approach, Comput Methods Appl Mech Eng, 191, 2057, 10.1016/S0045-7825(01)00368-1

Zhao, 2002, Vibrations of rotating cross-ply circular cylindrical shells with stringer and ring stiffener, Int J Solids Struct, 39, 529, 10.1016/S0020-7683(01)00194-9

Hua, 2001, Orthotropic Influence on frequency characteristics of a rotating composite laminated conical shell by the generalized differential quadrature method, Int J Solids Struct, 38, 3996, 10.1016/S0020-7683(00)00272-9

Gong, 2003, Rotating multilayered cylindrical shells to impact loading, AIAA J, 41, 139, 10.2514/2.1925

Shi, 2004, Dynamic characteristic analysis of rotating composite shell, Beijing Hangkong Hangtian Daxue Xuebao/J Beijing Univ Aeronaut Astronaut, 30, 31

Huang, 2005, Quasi-static simulation of composite-laminated shells subjected to low-velocity impact, J Reinforc Plast Compos, 24, 763, 10.1177/0731684405046613

Kim, 2005, Experimental approach on the behavior of composites laminated shell under transverse impact loading, Rev Quant Nondestruct Anal, 24, 1100, 10.1063/1.1916795

Johnson, 2003, Modelling soft body impact on composite structures, Compos Struct, 61, 103, 10.1016/S0263-8223(03)00033-3

Johnson, 2006, Influence of delamination on impact damage in composite structures, Compos Sci Technol, 66, 807, 10.1016/j.compscitech.2004.12.032

Johnson, 2001, Computational methods for predicting impact damage in composite structures, Compos Sci Technol, 61, 2183, 10.1016/S0266-3538(01)00111-7

Kim, 2004, vol. 465–466

Kim, 2004, vol. 270–273

Lee, 2002

Rastorguev, 2009, Physical relations for problems of impact loading and unsteady deformation of composite structures, J Appl Mech Tech Phys, 50, 155, 10.1007/s10808-009-0021-2

Smojver, 2003

Tiberkak, 2008, Damage prediction in composite plates subjected to low velocity impact, Compos Struct, 83, 73, 10.1016/j.compstruct.2007.03.007

Zhao, 2004, On impact damage of composite shells by a low-velocity projectile, J Compos Mater, 38, 1231, 10.1177/0021998304042084

Zhao, 2004, Progressive damage analysis of composite shell under impact loading, Key Eng Mater, 274–276, 111, 10.4028/www.scientific.net/KEM.274-276.111

Zhao, 2007, Damage initiation and propagation in composite shells subjected to impact, Compos Struct, 78, 91, 10.1016/j.compstruct.2005.08.013

Wan, 2001, Failure behavior of laminated composite cylindrical shells under axial impact loading, Harbin Gongye Daxue Xuebao, J Harbin Inst Technol (China), 33, 304

Yang, 2006, The penetration characteristics of CF/epoxy curved sheller according to stacking sequence, Key Eng Mater, 321–323, 885, 10.4028/www.scientific.net/KEM.321-323.885

Sahu, 2007, Research advances in the dynamic stability behavior of plates and shells: 1987–2005 – part I: conservative systems, Appl Mech Rev, 60, 65, 10.1115/1.2515580

Birman, 2004, Dynamic stability of long cylindrical sandwich shells and panels subject to periodic-in-time lateral pressure, J Compos Mater, 38, 591, 10.1177/0021998304042399

Darabi, 2008, Non-linear analysis of dynamic stability for functionally graded cylindrical shells under periodic axial loading, Compos Struct, 83, 201, 10.1016/j.compstruct.2007.04.014

Ng, 2001, Dynamic stability analysis of functionally graded cylindrical shells under periodic axial loading, Int J Solids Struct, 38, 1295, 10.1016/S0020-7683(00)00090-1

Darvizeh, 2006, The effect of boundary conditions on the dynamic stability of orthotropic cylinders using a modified exact analysis, Compos Struct, 74, 495, 10.1016/j.compstruct.2005.05.004

Kamat, 2001, Analysis of parametrically excited laminated composite joined conical-cylindrical shells, Comput Struct, 79, 65, 10.1016/S0045-7949(00)00111-5

Kasuya, 2003, An analysis of dynamic stability of cross-ply laminated cylindrical shells under impact hydrostatic pressure, Zairyo/J Soc Mater Sci, Jpn, 52, 1357, 10.2472/jsms.52.1357

Nemoto, 2003, An analysis of dynamic stability of composite laminated cylindrical shells subjected to periodic external pressure, Nippon Kikai Gakkai Ronbunshu, A Hen/Trans Jpn Soc Mech Eng, Part A, 69, 545

Peng, 2006, Dynamic instability of viscoelastic cross-ply laminated plates and circular cylindrical shells, Zhendong Gongcheng Xuebao/J Vib Eng, 19, 459

Sofiyev, 2003, Torsional buckling of cross-ply laminated orthotropic composite cylindrical shells subject to dynamic loading, Eur J Mech A/Solids, 22, 943, 10.1016/S0997-7538(03)00090-1

Khdeir, 2001, Thermally induced vibrations of cross-ply laminated shallow shells, Acta Mech, 151, 135, 10.1007/BF01246913

Tylikowski, 1998, Dynamic stability of rotating composite shells with thermoactive shape memory alloy fibers, J Therm Str, 21, 327, 10.1080/01495739808956150

Pinto Correiaa, 2000, A finite element semi-analytical model for laminated axisymmetric shells: statics, dynamics and buckling, Comput Struct, 76, 299, 10.1016/S0045-7949(99)00165-0

Wu, 2006, An asymptotic theory for dynamic response of laminated piezoelectric shells, Acta Mech, 183, 177, 10.1007/s00707-005-0306-3

Prusty, 2001, Finite element transient dynamic analysis of laminated stiffened shells, J Sound Vib, 248, 215, 10.1006/jsvi.2001.3678

Park, 2006, Linear static and dynamic analysis of laminated composite plates and shells using a 4-node quasi-conforming shell element, Composites: Part B, 37, 237, 10.1016/j.compositesb.2005.05.007

Fares, 2003, Minimization of the dynamic response of composite laminated doubly curved shells using design and control optimization, Compos Struct, 59, 369, 10.1016/S0263-8223(02)00241-6

Yang, 2001, Dynamic instability of laminated piezoelectric shells, Int J Solids Struct, 38, 2291, 10.1016/S0020-7683(00)00119-0

Sahu, 2001, Parametric resonance characteristics of laminated composite doubly curved shells subjected to non-uniform loading, J Reinforce Plast Compos, 20, 1556, 10.1177/073168401772679057

Tetsuya, 2000, A study on vibration characteristics of laminated composite cylindrical shells. Natural frequencies of FW antisymmetrically laminated composite cylindrical shells, Trans Jpn Soc Mech Eng, 66, 1747, 10.1299/kikaic.66.1747

Lee CY. Dynamic variational asymptotic procedure for laminated composite shells. PhD Thesis, Georgia Inst Tech; 2007.

Vu-Quoc, 2003, Optimal solid shells for nonlinear analyses of multilayer composites. II. Dynamics, Comput Methods Appl Mech Eng, 192, 1017, 10.1016/S0045-7825(02)00336-5

Birman, 2000, Axissymmetric dynamics of composite spherical shells with active peizoelectric-composite stiffeners, Acta Mech, 141, 71, 10.1007/BF01176808

Lee, 2009, Dynamic variational-asymptotic procedure for laminated composite shells – part I: low-frequency vibration analysis, J Appl Mech, 76, 77

Tetsuya N. Natural frequencies and transverse deformations of laminated cylindrical shells. Dyn Des Conf 2000;907–10.

Ip, 2002, Locating damage in circular cylindrical composite shells based on frequency sensitivities and mode shapes, Eur J Mech A/Solids, 21, 615, 10.1016/S0997-7538(02)01228-7

Ribeiro, 2008, Nonlinear vibrations of laminated cylindrical shallow shells under thermomechanical loading, J Sound Vib, 315, 626, 10.1016/j.jsv.2008.01.017

Jansen, 2008, The effect of static loading and imperfections on the nonlinear vibrations of laminated cylindrical shells, J Sound Vib, 315, 1035, 10.1016/j.jsv.2008.02.004

Pinto Correia, 2002, Active control of axisymmetric shells with piezoelectric layers: a mixed laminated theory with a high order displacement field, Comput Struct, 80, 2265, 10.1016/S0045-7949(02)00239-0

Ray, 2008, Performance of vertically and obliquely reinforced 1–3 piezoelectric composites for active damping of laminated composite shells, J Sound Vib, 315, 816, 10.1016/j.jsv.2008.02.012

Zemcık, 2007, High-performance four-node shell element with piezoelectric coupling for the analysis of smart laminated structures, Int J Numer Methods Eng, 70, 934, 10.1002/nme.1909

Yao, 2003, Hybrid-stabilized solid-shell model of laminated composite piezoelectric structures under nonlinear distribution of electric potential through thickness, Int J Numer Methods Eng, 58, 1499, 10.1002/nme.823

Kozlov, 2002, Basic equations for viscoelastic laminated shells with disturbed piezoelectric inclusions intended to control nonstationary vibrations, Int Appl Mech, 38, 1253, 10.1023/A:1022266614651

Rasskazov, 2000, Forced vibrations and vibroheating of shallow viscoelastic laminated shells with piezoelectric effect, Int Appl Mech, 36, 769, 10.1007/BF02681984

Babeshko, 2000, The thermoviscoelastoplastic axisymmetric stress–strain state of laminated flexible orthotropic shells, Int Appl Mech, 36, 1088, 10.1023/A:1026665101962

Galishin, 2008, Axisymmetric thermoviscoelastoplastic state of thin laminated shells made of a damageable material, Int Appl Mech, 44, 431, 10.1007/s10778-008-0055-9

Galishin, 2001, Determination of axisymmetrical geometrical nonlinear thermoviscoelaticplastic state of laminated medium-thickness shells, Int Appl Mech, 37, 271, 10.1023/A:1011397825022

Galishin, 2003, Determining the axisymmetrical geometrically nonlinear thermoviscoelastoplastic state of laminated shells by the theory of deformation along paths of small curvature, Int Appl Mech, 39, 848, 10.1023/A:1026281925121

Galishin, 2003, Determining the axisymmetric, geometrically nonlinear, thermoelastoplastic state of laminated orthotropic shells, Int Appl Mech, 39, 56, 10.1023/A:1023664032711

Sprenger, 2000, Delamination growth analysis in laminated structures with continuum-based 3D-shell elements and a viscoplastic softening model, Comput Methods Appl Mech Eng, 185, 123, 10.1016/S0045-7825(99)00255-8

Yan, 2007, The behavior of angle-ply laminated cylindrical shells with viscoelastic interfaces in cylindrical bending, Compos Struct, 78, 551, 10.1016/j.compstruct.2005.11.017

Teters, 2003, Reliability estimation of optimal viscoelastic composite shells in critical-time calculations, Mech Compos Mater, 39, 553, 10.1023/B:MOCM.0000010627.44159.72

Shina, 2009, Nonlinear flutter of aerothermally buckled composite shells with damping treatments, J Sound Vib, 324, 556, 10.1016/j.jsv.2009.02.022

Shin, 2009, Thermal post-buckled behaviors of cylindrical composite shells with viscoelastic damping treatments, J Sound Vib, 323, 93, 10.1016/j.jsv.2008.12.029

Vamsi, 2007, Studies on fluid-filled and submerged cylindrical shells with constrained viscoelastic layer, J Sound Vib, 303, 575, 10.1016/j.jsv.2007.01.009

Amabili, 2003, Nonlinear vibrations of circular cylindrical shells with different boundary conditions, AIAA J, 41, 1119, 10.2514/2.2053

Kuo, 2009, Study of the interaction of two acoustical fields and one FRP structure with FEM-BEM coupling analysis, J Reinforce Plast Compos, 28, 2083, 10.1177/0731684408091685

Okazaki, 2007, Vibration test of a cross-ply laminated composite circular cylindrical shell partially filled with liquid, Nihon Kikai Gakkai Ronbunshu, C Hen/Trans Jpn Soc Mech Eng, Part C, 73, 724

Okazaki, 2002, Free vibrations of a laminated composite coaxial circular cylindrical shell partially filled with liquid, Nippon Kikai Gakkai Ronbunshu, C Hen/Trans Jpn Soc Mech Eng, Part C, 68, 1942

Toorani, 2006, Swelling effect on the dynamic behaviour of composite cylindrical shells conveying fluid, Int J Numer Methods Fluids, 50, 397, 10.1002/fld.1058

Xi, 2000, A strip-element method for analyzing wave scattering by a crack in a fluid-filled composite cylindrical shell, Compos Sci Technol, 60, 1985, 10.1016/S0266-3538(00)00082-8

Xi, 2002, Dispersion of waves in immersed laminated composite hollow cylinders, J Sound Vib, 250, 215, 10.1006/jsvi.2001.3919

Yu, 2007, Experimental validation of vibration-based damage detection for static laminated composite shells partially filled with fluid, Compos Struct, 79, 288, 10.1016/j.compstruct.2006.11.008

Yu, 2007, Online damage detection for laminated composite shells partially filled with fluid, Compos Struct, 80, 334, 10.1016/j.compstruct.2006.05.019

Zhang L, Yang Y. Modeling of a fluid-filled ionic polymer-metal composite cylindrical shell. In: Proceedings SPIE, Adelaide, Australia; 6214: 11 December 2006.

Hasheminejad, 2009, Acoustic wave interaction with a laminated transversely isotropic spherical shell with imperfect bonding, Arch Appl Mech, 79, 97, 10.1007/s00419-008-0212-y

Librescu, 2001, A general theory of laminated of laminated composite shells featuring interlaminar bonding imperfections, Int J Solids Struct, 38, 3355, 10.1016/S0020-7683(00)00263-8

Zhu, 2006, Multiscale analysis including strain rate dependency for transient response of composite laminated shells, J Reinforce Plast Compos, 25, 1795, 10.1177/0731684406068448

Turkmen, 2002, Structural response of laminated composite shells subjected to blast loading: comparison of experimental and theoretical methods, J Sound Vib, 249, 663, 10.1006/jsvi.2001.3861

Velmurugan, 2003, Energy absorption characteristics of metallic and composite shells, Def Sci J, 53, 127, 10.14429/dsj.53.2137

Sofiyev, 2006, Semi-analytical solution of stability of composite orthotropic cylindrical shells undertime dependant a-periodic axialcompressive load, Iran J Sci Technol, 30, 343

Icardi, 2002, Laminated shell model with second-order expansion of the reciprocals of Lame coefficients Ha;Hb and interlayer continuities fulfillment, Compos Struct, 56, 293, 10.1016/S0263-8223(02)00014-4

Piskunov, 2002, Evolution of the theory of laminated plates and shells, Int Appl Mech, 38, 135, 10.1023/A:1015756726070

Cugnoni, 2004, Identification by modal analysis of composite structures modelled with FSDT and HSDT laminated shell finite elements, Composites: Part A, 35, 977, 10.1016/j.compositesa.2004.01.014

Guedes, 2008, Numerical analysis of singly curved shallow composite panels under three-point bend load, Compos Struct, 83, 212, 10.1016/j.compstruct.2007.04.005

Kwak, 2009, Dynamic modelling and active vibration controller design for a cylindrical shell equipped with piezoelectric sensors and actuators, J Sound Vib, 321, 510, 10.1016/j.jsv.2008.09.051

Cho, 2009, Optimization of dynamic behaviors of an orthotropic composite shell subjected to hygrothermal environment, Finite Elem Anal Des, 45, 852, 10.1016/j.finel.2009.06.029

Sahoo, 2006, Stiffened composite hypar shell roofs under free vibration: behaviour and optimization aids, J Sound Vib, 295, 362, 10.1016/j.jsv.2006.01.012

Teters, 2004, Multicriteria optimization of a composite cylindrical shell subjected to thermal and dynamic actions, Mech Compos Mater, 40, 489, 10.1007/s11029-005-0016-x

Roy, 2009, Genetic algorithm based optimal control of smart composite shell structures under mechanical loading and thermal gradient, Smart Mater Struct, 18, 5006, 10.1088/0964-1726/18/11/115006