Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties
Tóm tắt
Từ khóa
Tài liệu tham khảo
Taha, 2001, Industrialization of cast aluminum matrix composites (AMCCs), Mater. Manuf. Process., 16, 619, 10.1081/AMP-100108625
Kim, 2017, Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al Metal-Matrix Nano-Composites (MMNCs), J Mater Sci, 52, 13319, 10.1007/s10853-017-1378-x
Anthony, 2014
Bhoi, 2020, Developments in the aluminum metal matrix composites reinforced by micro/nano particles – a review, J Compos Mater, 54, 813, 10.1177/0021998319865307
Macke, 2012, Metal matrix composites offer the automotive industry and opportunity to reduce vehicle weight, improve performance, Adv. Mater. Process., 170, 19
Dursun, 2014, Recent developments in advanced aircraft aluminium alloys, Mater Des, 56, 862, 10.1016/j.matdes.2013.12.002
Rohatgi, 1991, Cast aluminum-matrix composites for automotive applications, JOM, 43, 10, 10.1007/BF03220538
Rambabu, 2017, Aluminium alloys for aerospace applications, 29
Hashim, 1999, Metal matrix composites: production by the stir casting method, J Mater Process Technol, 92–93, 1, 10.1016/S0924-0136(99)00118-1
Kok, 2005, Production and mechanical properties of Al2O3particle-reinforced 2024 aluminium alloy composites, J Mater Process Technol, 161, 381, 10.1016/j.jmatprotec.2004.07.068
Al-Salihi, 2019, Mechanical and wear behavior of AA7075 aluminum matrix composites reinforced by Al2O3 nanoparticles, Nanocomposites, 5, 67, 10.1080/20550324.2019.1637576
Arivukkarasan, 2018, Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites, Part. Sci. Technol., 36, 967, 10.1080/02726351.2017.1331285
Basavarajappa, 2006, Dry sliding wear behavior of Al 2219/SiCp-Gr hybrid metal matrix composites, J Mater Eng Perform, 15, 668, 10.1361/105994906X150803
Mohanavel, 2019, Synthesis and evaluation on mechanical properties of LM4/AlN alloy based composites, Energy Sources, Part A Recover. Util. Environ. Eff., 1
Sharma, 2015, Production and some properties of Si3N4 reinforced aluminium alloy composites, J. Asian Ceram. Soc., 3, 352, 10.1016/j.jascer.2015.07.002
Kumar, 2017, A study on mechanical properties and strengthening mechanisms of AA5052/ZrB2 in situ composites, J Eng Mater Technol, 139, 10.1115/1.4034692
Cheneke, 2019, The effect of solution treatment on aging behavior and mechanical properties of AA2024-TiB2 composite synthesized by semi-solid casting, SN Appl. Sci., 1, 1501, 10.1007/s42452-019-1531-z
Gladston, 2017, Dry sliding wear behavior of AA6061 aluminum alloy composites reinforced rice husk ash particulates produced using compocasting, J. Asian Ceram. Soc., 5, 127, 10.1016/j.jascer.2017.03.005
Jose, 2018, Manufacture and characterization of a novel agro-waste based low cost metal matrix composite (MMC) by compocasting, Mater Res Express, 5, 066530, 10.1088/2053-1591/aac803
Ravi Kumar, 2012, Analysis of parameters influencing wear and frictional behavior of aluminum-fly ash composites, Tribol. Trans., 55, 723, 10.1080/10402004.2012.700763
Ravindran, 2013, Investigation of microstructure and mechanical properties of aluminum hybrid nano-composites with the additions of solid lubricant, Mater Des, 51, 448, 10.1016/j.matdes.2013.04.015
AZom. https://www.azom.com/article.aspx?ArticleID=6588.
Rahimi, 2015, Microstructural characteristics and mechanical properties of Al-2024 alloy processed via a rheocasting route, Int. J. Miner. Metall. Mater., 22, 59, 10.1007/s12613-015-1044-8
Kumar, 2019, Synthesis, characterization and mechanical behavior of Al 3003 - TiO 2 surface composites through friction stir processing, Mater. Manuf. Process., 34, 183, 10.1080/10426914.2018.1544711
Ahmadi, 2017, Microstructure and mechanical properties of Al / ZrC / TiC hybrid nanocomposite filler metals of tungsten inert gas welding fabricated by accumulative roll bonding, J Manuf Process, 26, 173, 10.1016/j.jmapro.2017.02.012
Bauri, 2014, Tungsten particle reinforced Al 5083 composite with high strength and ductility, Mater. Sci. Eng. A, 620, 67, 10.1016/j.msea.2014.09.108
Barati, 2019, The effects of friction stir processing and friction stir vibration processing on mechanical, wear and corrosion characteristics of Al6061/SiO2 surface composite, J Manuf Process, 45, 491, 10.1016/j.jmapro.2019.07.034
Hu, 2016, Effects of manufacturing processes on microstructure and properties of Al/A356–B4C composites, Mater. Manuf. Process., 31, 1292, 10.1080/10426914.2016.1151049
Carter, 2013
Rahaman, 2017
Kamrani, 2010, Effect of reinforcement volume fraction on the mechanical properties of Al-SiC nanocomposites produced by mechanical alloying and consolidation, J Compos Mater, 44, 313, 10.1177/0021998309347570
Prasad, 2004, Aluminum metal-matrix composites for automotive applications: tribological considerations, Tribol Lett, 17, 445, 10.1023/B:TRIL.0000044492.91991.f3
Mazahery, 2012, Hardness and tensile strength study on Al356–B4C composites, Mater Sci Technol, 28, 634, 10.1179/1743284710Y.0000000010
Sujith, 2020, Microstructural characterization and experimental investigations into two body abrasive wear behavior of Al-7079/TiC in-situ metal matrix composites, Arch Proc Inst Mech Eng Part J J Eng Tribol 1994-1996, 234, 588, 10.1177/1350650119883559
Samal, 2019, Fabrication and mechanical properties of titanium carbide reinforced aluminium composites, Mater. Today Proc., 18, 2649, 10.1016/j.matpr.2019.07.125
Huang, 2019, Producing of Al–WC surface composite by additive friction stir processing, Mater. Manuf. Process., 34, 147, 10.1080/10426914.2018.1532590
Mazahery, 2011, Investigation on mechanical properties of Nano-Al2O3-reinforced aluminum matrix composites, J Compos Mater, 45, 2579, 10.1177/0021998311401111
Sadeghi, 2018, Friction stir processing of spark plasma sintered aluminum matrix composites with bimodal micro- and nano-sized reinforcing Al2O3 particles, J Manuf Process, 32, 412, 10.1016/j.jmapro.2018.03.013
Parveen, 2019, Mechanical and tribological behaviour of Al-ZrO2 composites: a review, 217
Ramachandra, 2016, Evaluation of Corrosion Proeprty Od Aluminium Zirconium Dioxide (AlZrO2) Nanocomposites, Int. J. Mater. Metall. Eng., 2016, 1321
He, 2019, Preparation, microstructures and mechanical properties of in-situ TiB2/Al composites by mechanical stirring and subsequent ultrasonic treatment, Mater Res Express, 6, 10.1088/2053-1591/ab471f
Dinaharan, 2012, Optimization of friction stir welding process to maximize tensile strength of AA6061/ZrB 2 in-situ composite butt joints, Met. Mater. Int., 18, 135, 10.1007/s12540-012-0016-z
Mohan, 2016, Synthesis and tribological properties of AA5052-base insitu composites, Compos Interfaces, 23, 503, 10.1080/09276440.2016.1155386
Ko, 2013, Manufacture of CNTs-Al powder precursors for casting of CNTs-Al matrix composites, Mater. Sci. Forum, 765, 353, 10.4028/www.scientific.net/MSF.765.353
Prashantha Kumar, 2017, Effect of graphene addition and tribological performance of Al 6061/graphene flake composite, Tribol. - Mater. Surfaces Interfaces, 11, 88, 10.1080/17515831.2017.1329920
Samal, 2020, Dry sliding wear behavior of Al 6082 metal matrix composites reinforced with red mud particles, SN Appl. Sci., 2, 313, 10.1007/s42452-020-2136-2
Samal, 2020, Effect of red mud on mechanical and microstructural characteristics of aluminum matrix composites, 75
Omrani, 2016, Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—a review, Int. J. Adv. Manuf. Technol., 83, 325, 10.1007/s00170-015-7528-x
Dinaharan, 2019, Microstructural characterization and tensile behavior of friction stir processed AA6061/Al2Cu cast aluminum matrix composites, J Alloys Compd, 781, 270, 10.1016/j.jallcom.2018.12.091
Bajakke, 2019, Particulate metal matrix composites and their fabrication via friction stir processing–a review, Mater. Manuf. Process., 34, 833, 10.1080/10426914.2019.1605181
Ma, 2008, Friction stir processing technology: a review, Metall. Mater. Trans. A, 39 A, 642, 10.1007/s11661-007-9459-0
Kumar, 2017, Simultaneous improvement of mechanical strength, ductility and corrosion resistance of stir cast Al7075-2% SiC micro- and nanocomposites by friction stir processing, J Manuf Process, 30, 1, 10.1016/j.jmapro.2017.09.005
Zhao, 2017, Friction stir welding of carbon nanotubes reinforced Al-Cu-Mg alloy composite plates, J Mater Sci Technol, 33, 1004, 10.1016/j.jmst.2017.01.033
Li, 2019, Research status and prospect of friction stir processing technology, Coatings, 9, 129, 10.3390/coatings9020129
Cavaliere, 2018, Influence of SiO2 nanoparticles on the microstructure and mechanical properties of Al matrix nanocomposites fabricated by spark plasma sintering, Compos. Part B Eng., 146, 60, 10.1016/j.compositesb.2018.03.045
Durowoju, 2019, Wear and corrosion studies of graphite-aluminum composite reinforced with micro/nano-TiB2 via spark plasma sintering, Mater. Sci. Eng. Technol., 50, 126
Zhang, 2017, Mechanical and optical properties of transparent alumina obtained by rapid vacuum sintering, Ceram Int, 43, 420, 10.1016/j.ceramint.2016.09.175
Prashantha Kumar, 2018, Encapsulation and microwave hybrid processing of Al 6061–graphene–SiC composites, Mater. Manuf. Process., 33, 19, 10.1080/10426914.2017.1279320
Asadipanah, 2015, Production of Al–ZrB2 nano-composites by microwave sintering process, J. Mater. Sci. Mater. Electron., 26, 6148, 10.1007/s10854-015-3195-9
Ashwath, 2018, Effect of ceramic reinforcements on microwave sintered metal matrix composites, Mater. Manuf. Process., 33, 7, 10.1080/10426914.2016.1244851
Bhatt, 2012, Synthesis of nanostructured Al–Mg–SiO2 metal matrix composites using high-energy ball milling and spark plasma sintering, J Alloys Compd, 536, S35, 10.1016/j.jallcom.2011.12.062
Li, 2017, Effects of pressure on microstructure and mechanical properties of SiCp/2024 Al-based composites fabricated by powder thixoforming, J Mater Sci, 52, 2045, 10.1007/s10853-016-0493-4
Arunachalam, 2019, A review on the production of metal matrix composites through stir casting – furnace design, properties, challenges, and research opportunities, J Manuf Process, 42, 213, 10.1016/j.jmapro.2019.04.017
Narciso, 2016, Effects of infiltration pressure on mechanical properties of Al-12Si/graphite composites for piston engines, Compos Part B Eng, 91, 441, 10.1016/j.compositesb.2016.01.022
Yang, 2018, Microstructure and mechanical properties of graphene nanoplates reinforced pure Al matrix composites prepared by pressure infiltration method, J Alloys Compd, 732, 748, 10.1016/j.jallcom.2017.10.283
Rohatgi, 2006, Compressive characteristics of A356/Fly ash cenosphere composites synthesized by pressure infiltration technique, Compos Part A Appl Sci Manuf, 37, 430, 10.1016/j.compositesa.2005.05.047
Zhou, 2018, Al Alloy/Ti3SiC2 composites fabricated by pressureless infiltration with melt-spun Al alloy ribbons, Ceram Int, 44, 6026, 10.1016/j.ceramint.2017.12.212
Tao, 2019, Improved thermal conductivity of silicon carbide fibers-reinforced silicon carbide matrix composites by chemical vapor infiltration method, Ceram Int, 45, 2207, 10.1016/j.ceramint.2018.10.132
Soltani, 2017, Stir casting process for manufacture of Al – SiC composites, Rare Met Mater Eng, 36, 581, 10.1007/s12598-015-0565-7
Kandpal, 2018, Manufacturing and technological challenges in stir casting of metal matrix composites- a review, Mater. Today Proc., 5, 5, 10.1016/j.matpr.2017.11.046
Pazhouhanfar, 2018, Microstructural characterization and mechanical properties of TiB2 reinforced Al6061 matrix composites produced using stir casting process, Mater. Sci. Eng. A, 710, 172, 10.1016/j.msea.2017.10.087
Lu, 2016, The fabrication and properties of the squeeze-cast TiN/Al composites, Mater. Manuf. Process., 31, 1306, 10.1080/10426914.2015.1070417
Gurusamy, 2015, Influence of processing temperatures on mechanical properties and microstructure of squeeze cast aluminum alloy composites, Mater. Manuf. Process., 30, 367, 10.1080/10426914.2014.973587
Huang, 2011, Aluminum alloy pistons reinforced with SiC fabricated by centrifugal casting, J Mater Process Technol, 211, 1540, 10.1016/j.jmatprotec.2011.04.006
Ramesh, 2011, A study on microstructure and mechanical properties of Al 6061-TiB2in-situ composites, Mater. Sci. Eng. A, 528, 4125, 10.1016/j.msea.2011.02.024
Shabani, 2013, The synthesis of the particulates Al matrix composites by the compocasting method, Ceram Int, 39, 1351, 10.1016/j.ceramint.2012.07.073
Mahmoud, 2008, Tribological behaviour of A390/Grp metal-matrix composites fabricated using a combination of rheocasting and squeeze casting techniques, Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., 222, 257, 10.1243/09544062JMES468
Rezayat, 2012, Production of high strength Al – Al2 O3 composite by accumulative roll bonding, Compos Part A Appl Sci Manuf, 43, 261, 10.1016/j.compositesa.2011.10.015
Gangil, 2017, Aluminium based in-situ composite fabrication through friction stir processing: a review, J Alloys Compd, 715, 91, 10.1016/j.jallcom.2017.04.309
Ujah, 2019, Enhanced Tribology, Thermal and Electrical Properties of Al-CNT Composite Processed via Spark Plasma Sintering for Transmission Conductor, J Mater Sci, 54, 14064, 10.1007/s10853-019-03894-x
Gao, 2017, Mechanical properties and microstructure of WC-Fe-Ni-Co cemented carbides prepared by vacuum sintering, Vaccum, 143, 271, 10.1016/j.vacuum.2017.06.028
Bhoi, 2020, Synthesis and characterization of zinc oxide reinforced aluminum metal matrix composite produced by microwave sintering, J Compos Mater, 54, 3625, 10.1177/0021998320918646
Sun, 2018, Structural Design of Laminated B4C/TiC Composite Fabricated by Reactive Melt Infiltration, J Alloys Compd, 765, 913, 10.1016/j.jallcom.2018.06.271
Raei, 2016, Effect of stirring speed and time on microstructure and mechanical properties of cast Al–Ti–Zr–B4C composite produced by stir casting, Russ. J. Non-Ferrous Met., 57, 347, 10.3103/S1067821216040088
Chen, 2000, Solidification and interfacial structure of in situ Al-4.5Cu/TiB2 composite, J Mater Sci, 35, 5605, 10.1023/A:1004869400097
Wang, 2004, Reaction mechanism in an Al-TiO2-C system for producing in situ Al/(TiC + Al2O3) composite, J Mater Sci, 39, 667, 10.1023/B:JMSC.0000011527.49405.5f
Hajjari, 2011, Effect of applied pressure and nickel coating on microstructural development in continuous carbon fiber-reinforced aluminum composites fabricated by squeeze casting, Mater. Manuf. Process., 26, 599, 10.1080/10426910903447311
Adelakin, 2011, Study of boride-reinforced aluminum matrix composites produced via centrifugal casting, Mater. Manuf. Process., 26, 338, 10.1080/10426910903124829
Mazahery, 2014, The effect of primary and secondary processing on the abrasive wear properties of compocast aluminum 6061 alloy matrix composites, Prot Met Phys Chem Surf, 50, 817, 10.1134/S2070205114060021
Girot, 1987, Rheocasting AI matrix composites, J Met, 7, 18
Mondal, 2006, High stress abrasive wear behaviour of aluminium hard particle composites: effect of experimental parameters, particle size and volume fraction, Tribol Int, 39, 470, 10.1016/j.triboint.2005.03.003
Zhao, 2006, Friction and wear properties of TiB2P/Al composite, Compos Part A Appl Sci Manuf, 37, 1916, 10.1016/j.compositesa.2005.12.018
Wu, 2019, Microstructure-based modelling of fracture of particulate reinforced metal matrix composites, Compos. Part B Eng., 163, 384, 10.1016/j.compositesb.2018.12.099
Kalkanli, 2008, Synthesis and characterization of aluminum alloy 7075 reinforced with silicon carbide particulates, Mater Des, 29, 775, 10.1016/j.matdes.2007.01.007
Thangarasu, 2015, Synthesis and characterization of titanium carbide particulate reinforced AA6082 aluminium alloy composites via friction stir processing, Arch Civ Mech Eng, 15, 324, 10.1016/j.acme.2014.05.010
Birol, 2008, In situ synthesis of Al-TiCp composites by reacting K2TiF6 and particulate graphite in molten aluminium, J Alloys Compd, 454, 110, 10.1016/j.jallcom.2006.12.016
Pradeep Kumar, 2017, Microstructure and mechanical behaviour of in situ fabricated AA6061–TiC metal matrix composites, Arch Civ Mech Eng, 17, 535, 10.1016/j.acme.2016.12.006
Cho, 2013, Feasible process for producing in situ Al/TiC composites by combustion reaction in an Al melt, Met Mater Int, 19, 1109, 10.1007/s12540-013-5028-9
Lakshmi, 1998, In situ preparation of TiB2reinforced Al based composites, J Mater Process Technol, 73, 160, 10.1016/S0924-0136(97)00225-2
Rajan, 2013, Synthesis and characterization of in situ formed titanium diboride particulate reinforced AA7075 aluminum alloy cast composites, Mater Des, 44, 438, 10.1016/j.matdes.2012.08.008
Kumar, 2015, In-situ development of ZrB2 particles and their effect on microstructure and mechanical properties of AA5052 metal-matrix composites, Mater Des, 80, 129, 10.1016/j.matdes.2015.05.020
Zhao, 2005, In-situ preparation of Al matrix composites reinforced by TiB 2 particles and sub-micron ZrB 2, J Mater Sci, 40, 4365, 10.1007/s10853-005-0796-3
Dinaharan, 2011, Influence of in situ formed ZrB 2 particles on microstructure and mechanical properties of AA6061 metal matrix composites, Mater. Sci. Eng. A, 528, 5733, 10.1016/j.msea.2011.04.033
Kerti, 2008, Microstructural variations in cast B4C-reinforced aluminium matrix composites (AMCs), Mater Lett, 62, 1215, 10.1016/j.matlet.2007.08.015
Kalaiselvan, 2011, Production and characterization of AA6061-B4C stir cast composite, Mater Des, 32, 4004, 10.1016/j.matdes.2011.03.018
Ma, 2018, Microstructural characterization of Al4C3 in aluminum–Graphite composite prepared by electron-beam melting, J Mater Sci, 53, 10173, 10.1007/s10853-018-2336-y
Sajjadi, 2012, Comparison of microstructure and mechanical properties of A356 aluminum Alloy/Al2O3 composites fabricated by stir and compo-casting processes, Mater Des, 34, 106, 10.1016/j.matdes.2011.07.037
Valibeygloo, 2013, Microstructural and Mechanical Properties of Al-4.5wt% Cu Reinforced with Alumina Nanoparticles by Stir Casting Method, Int. Jounral Miner. Metall. Mater., 20, 978, 10.1007/s12613-013-0824-2
Wang, 2011, Characterization of (Al2O3)p/Al composites in situ synthesized by direct melt reaction method, Adv. Mater. Res., 152–153, 25, 10.4028/www.scientific.net/AMR.305.25
Zhang, 2020, High-performance Al-1.5 wt% Si-Al2O3 composite by vortex-free high-speed stir casting, J Manuf Process, 56, 1126, 10.1016/j.jmapro.2020.06.016
Esawi, 2009, Fabrication and properties of dispersed carbon nanotube-aluminum composites, Mater Sci Eng A, 508, 167, 10.1016/j.msea.2009.01.002
Zhang, 2020, Influence of aging treatment on the microstructure and mechanical properties of CNTs/7075 Al composites, J Alloys Compd, 814, 10.1016/j.jallcom.2019.152357
Fan, 2018, Enhanced interfacial bonding and mechanical properties in CNT/Al composites fabricated by flake powder metallurgy, Carbon N Y, 130, 333, 10.1016/j.carbon.2018.01.037
Miller, 1991, Strengthening mechanisms in particulate metal matrix composites, Scr Metall Mater, 25, 33, 10.1016/0956-716X(91)90349-6
Zhang, 2008, Contribution of orowan strengthening effect in particulate-reinforced metal matrix nanocomposites, Mater Sci Eng A, 484, 148, 10.1016/j.msea.2006.10.184
Muralidharan, 2018, Microstructure and mechanical behavior of AA2024 aluminum matrix composites reinforced with in situ synthesized ZrB 2 particles, J Alloys Compd, 735, 2167, 10.1016/j.jallcom.2017.11.371
Samal, 2019, Influence of TiC on dry sliding wear and mechanical properties of in situ synthesized AA5052 metal matrix composites, J Compos Mater, 53, 4323, 10.1177/0021998319857124
Samer, 2015, Microstructure and mechanical properties of an Al – TiC metal matrix composite obtained by reactive synthesis, Compos Part A Appl Sci Manuf, 72, 50, 10.1016/j.compositesa.2015.02.001
Choi, 2011, Strengthening in nanostructured 2024 aluminum alloy and its composites containing carbon nanotubes, Compos Part A Appl Sci Manuf, 42, 1438, 10.1016/j.compositesa.2011.06.008
Kaftelen, 2011, Comparative processing-structure-Property studies of Al-Cu matrix composites reinforced with TiC particulates, Compos Part A Appl Sci Manuf, 42, 812, 10.1016/j.compositesa.2011.03.016
Abdizadeh, 2013, Investigation on the mechanical properties and fracture behavior of A356 aluminum alloy based ZrO2 particle reinforced metal matrix composites, Ceram Int, 39, 2045, 10.1016/j.ceramint.2012.08.057
Rabiei, 2008, Fracture behavior of particle reinforced metal matrix composites, Compos Part A Appl Sci Manuf, 39, 294, 10.1016/j.compositesa.2007.10.018
Sanaty-Zadeh, 2012, Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of hall-petch effect, Mater Sci Eng A, 531, 112, 10.1016/j.msea.2011.10.043
Sharma, 2017, Finite element modeling of effective thermomechanical properties of Al–B4C metal matrix composites, J Mater Sci, 52, 1416, 10.1007/s10853-016-0435-1
Kumar, 2012, Mechanical and dry sliding wear behaviour of Al7075 alloy-reinforced with SiC particles, J Compos Mater, 46, 1201, 10.1177/0021998311414948
Samal, 2019, Investigation of impact performance of aluminum metal matrix composites by stir casting, IOP Conf Ser Mater Sci Eng, 653, 10.1088/1757-899X/653/1/012047
Tian, 2014, Effects of in situ generated ZrB 2 nano-particles on microstructure and tensile properties of 2024Al matrix composites, J Alloys Compd, 594, 1, 10.1016/j.jallcom.2014.01.117
Boostani, 2015, Enhanced tensile properties of aluminium matrix composites reinforced with graphene encapsulated SiC nanoparticles, Compos Part A Appl Sci Manuf, 68, 155, 10.1016/j.compositesa.2014.10.010
Mazahery, 2013, Application of the extrusion to increase the binding between the ceramic particles and the metal matrix : enhancement of mechanical and tribological properties, J Mater Sci Technol, 29, 423, 10.1016/j.jmst.2013.03.016
Harichandran, 2015, Effect of nano / micro b4 C particles on the mechanical properties of aluminium metal matrix composites fabricated by ultrasonic cavitation-assisted solidification process, Arch Civ Mech Eng, 16, 147, 10.1016/j.acme.2015.07.001
Sahin, 2003, Production and properties of SiCp-reinforced aluminium alloy composites, Compos Part A Appl Sci Manuf, 34, 709, 10.1016/S1359-835X(03)00142-8
Lijay, 2016, Microstructure and mechanical properties characterization of AA6061/TiC aluminum matrix composites synthesized by in situ reaction of silicon carbide and potassium fluotitanate, Trans. Nonferrous Met. Soc. China (English Ed.), 26, 1791, 10.1016/S1003-6326(16)64255-3
Babu, 2017, Nano and macromechanical properties of aluminium (A356) based hybrid composites reinforced with multiwall carbon nanotubes/alumina fiber, J Compos Mater, 51, 1631, 10.1177/0021998316661228
Shin, 2014, Effect of the interface layer on the mechanical behavior of TiO2 nanoparticle reinforced aluminum matrix composites, J Compos Mater, 48, 99, 10.1177/0021998312469238
Guagliano, 1998, A numerical model to investigate the role of residual stresses on the mechanical behavior of Al/Al2O3 particulate composites, J Mater Eng Perform, 7, 183, 10.1361/105994998770347909
Rebba, 2015, Investigations on mechanical behaviour of B4C and MoS2 reinforced AA2024 hybrid composites, J Manuf Sci Prod, 15, 339
Wang, 2012, Investigation on fracture toughness of aluminum matrix composites reinforced with in situ titanium diboride particles, J Compos Mater, 46, 2145, 10.1177/0021998311430158
Su, 2012, Processing, microstructure and tensile properties of nano-sized Al2O3 particle reinforced aluminum matrix composites, Mater Des, 36, 590, 10.1016/j.matdes.2011.11.064
Sulaiman, 2014, Effect of TiC particulates on the microstructure and mechanical properties of aluminium-based metal matrix composite, Adv. Mater. Res., 903, 145, 10.4028/www.scientific.net/AMR.903.145
Liang, 2010, Microstructure and tensile properties of in situ TiCp/Al-4.5wt.% Cu composites obtained by direct reaction synthesis, Mater Sci Eng A, 527, 7955, 10.1016/j.msea.2010.08.098
Karantzalis, 1997, The mechanical properties of Al-TiC metal matrix composites fabricated by a flux-casting technique, Mater Sci Eng A, 237, 200, 10.1016/S0921-5093(97)00290-6
Nukami, 1995, In situ synthesis of TiC particulate-reinforced aluminum matrix composites, Metall Mater Trans A, 26, 1877, 10.1007/BF02670775
Wang, 2011, Impact behavior of in situ TiB2/Al composite at various temperatures, J Mater Sci, 46, 5192, 10.1007/s10853-011-5454-3
Fenghong, 2019, Effects of silicon carbide and tungsten carbide in aluminium metal matrix composites, Silicon, 1
Alaneme, 2012, Fracture toughness (K1C) and tensile properties of as-cast and age-hardened aluminium (6063) silicon carbide particulate composites, Sci. Iran., 19, 992, 10.1016/j.scient.2012.06.001
Mazaheri, 2013, Comparison of microstructural and mechanical properties of Al-TiC, Al-B4C and Al-TiC-B4C composites prepared by casting techniques, Mater Sci Eng A, 560, 278, 10.1016/j.msea.2012.09.068
Cavaliere, 2017, Carbon nanotube reinforced aluminum matrix composites produced by spark plasma sintering, J Mater Sci, 52, 8618, 10.1007/s10853-017-1086-6
Hidalgo-Manrique, 2017, Microstructure and mechanical behaviour of aluminium matrix composites reinforced with graphene oxide and carbon nanotubes, J Mater Sci, 52, 13466, 10.1007/s10853-017-1450-6
Tyagi, 2005, Synthesis and tribological characterization of in situ cast Al-TiC composites, Wear, 259, 569, 10.1016/j.wear.2005.01.051
Karun, 2016, Enhancement in tribological behaviour of functionally graded SiC reinforced aluminium composites by centrifugal casting, J Compos Mater, 50, 2255, 10.1177/0021998315602946
Ramesh, 2019, Investigation on mechanical properties and wear behaviour of titanium diboride reinforced composites, FME Trans., 47, 873, 10.5937/fmet1904873R
Ramesh, 2011, Friction and wear behaviour of cast Al 6063 based in situ metal matrix composites, Wear, 271, 1928, 10.1016/j.wear.2010.12.048
Radhika, 2018, Study on three-body abrasive wear behavior of functionally graded Al/TiB2 composite using response surface methodology, Part. Sci. Technol., 36, 816, 10.1080/02726351.2017.1305024
Gultekin, 2010, The effects of applied load on the coefficient of friction in Cu-MMC brake Pad/Al-SiCp MMC brake disc system, Wear, 270, 73, 10.1016/j.wear.2010.09.001
Sharma, 2017, A study on wear behaviour of Al/6101/graphite composites, J. Asian Ceram. Soc., 5, 42, 10.1016/j.jascer.2016.12.007
Uthayakumar, 2013, Wear performance of Al-SiC-B4C hybrid composites under dry sliding conditions, Mater Des, 47, 456, 10.1016/j.matdes.2012.11.059
Loganathan, 2019, Analysis and characterization of friction behaviour on AA7075/ZrB2 composite under dry sliding condition, Mater Res Express, 6, 026576, 10.1088/2053-1591/aaf1fe
Umanath, 2013, Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites, Compos. Part B Eng., 53, 159, 10.1016/j.compositesb.2013.04.051
Yigezu, 2013, Effect of sliding distance, applied load, and weight percentage of reinforcement on the abrasive wear properties of in situ synthesized Al-12%Si/TiC composites, Tribol. Trans., 56, 546, 10.1080/10402004.2013.767401
Kök, 2006, Abrasive wear of Al2O3 particle reinforced 2024 aluminium alloy composites fabricated by vortex method, Compos Part A Appl Sci Manuf, 37, 457, 10.1016/j.compositesa.2005.05.038
Kumar, 2015, Tribological behavior of an aluminum matrix composite with Al4SiC4 reinforcement under dry sliding condition, Tribol. Trans., 58, 518, 10.1080/10402004.2014.990594
Alpas, 1994, Effect of microstructure (particulate size and volume fraction) and counterface material on the sliding wear resistance of particulate-reinforced aluminum matrix composites, Metall. Mater. Trans. A, 25, 969, 10.1007/BF02652272
Sivakumar, 2019, Influence of ZrB2 hard ceramic reinforcement on mechanical and wear properties of aluminum, Ceram Int, 45, 7055, 10.1016/j.ceramint.2018.12.208
Yuvaraj, 2015, Fabrication of Al5083/B4C surface composite by friction stir processing and its tribological characterization, J. Mater. Res. Technol., 4, 398, 10.1016/j.jmrt.2015.02.006
Mahdavi, 2011, Effect of SiC content on the processing, compaction behavior, and properties of Al6061/SiC/Gr hybrid composites, J Mater Sci, 46, 1502, 10.1007/s10853-010-4954-x
Monikandan, 2016, Dry sliding wear studies of aluminum matrix hybrid composites, Bioresour Technol Rep, 2, S12
Sharma, 2019, Investigation of T4 and T6 Heat treatment on the wear properties of sillimanite reinforced LM30 aluminium alloy composites, Wear, 426–427, 27, 10.1016/j.wear.2018.12.065
Nieto, 2017, Reinforcement size effects on the abrasive wear of boron carbide reinforced aluminum composites, Wear, 390–391, 228, 10.1016/j.wear.2017.08.002
Shivamurthy, 2011, Tribological characteristics of A356 Al alloy-SiCP composite discs, Wear, 271, 1946, 10.1016/j.wear.2011.01.075
Ahmad, 2013, Tribology behaviour of alumina particles reinforced aluminium matrix composites and brake disc materials, Procedia Eng, 68, 674, 10.1016/j.proeng.2013.12.238
Uyyuru, 2006, Effect of reinforcement volume fraction and size distribution on the tribological behavior of Al-composite/brake pad tribo-couple, Wear, 260, 1248, 10.1016/j.wear.2005.08.011
Hemanth, 2005, Tribological behavior of cryogenically treated B4Cp/Al-12% Si composites, Wear, 258, 1732, 10.1016/j.wear.2004.12.009
Venkararaman, 2000, Correlation between the characteristics of the mechanically mixed layer and wear behaviour of aluminium, Al-7075 alloy and Al-MMCs and wear behaviour of aluminium, Al-7075 Alloy and Al-MMCs, Wear, 245, 22
Rao, 2016, Mechanical and tribological properties of AA7075-TiC metal matrix composites under heat treated (T6) and cast conditions, J. Mater. Res. Technol., 5, 377, 10.1016/j.jmrt.2016.03.011
Sardar, 2018, High stress abrasive wear characteristics of Al 7075 alloy and 7075/Al2O3 composite, Measurement, 127, 42, 10.1016/j.measurement.2018.05.090
Kaushik, 2016, The effect of wear parameters and heat treatment on two body abrasive wear of Al-SiC-Gr hybrid composites, Tribol Int, 96, 184, 10.1016/j.triboint.2015.12.045
Mandal, 2009, Wear behaviour of near eutectic Al-Si alloy reinforced with in-situ TiB2 particles, Mater. Sci. Eng. A, 506, 27, 10.1016/j.msea.2008.11.007
Michael Rajan, 2014, Effect of TiB2 content and temperature on sliding wear behavior of AA7075/TiB2 in situ aluminum cast composites, Arch. Civ. Mech. Eng., 14, 72, 10.1016/j.acme.2013.05.005
Kumar, 2014, Dry sliding wear behavior of stir cast AA6061-T6/AlNp composite, Trans. Nonferrous Met. Soc. China (English Ed.), 24, 2785, 10.1016/S1003-6326(14)63410-5
Dinaharan, 2012, Dry sliding wear behavior of AA6061/ZrB2 in-situ composite, Trans. Nonferrous Met. Soc. China (English Ed.), 22, 810, 10.1016/S1003-6326(11)61249-1
Kar, 2019, Effect of red mud and TiC on friction and wear characteristics of Al 7075 metal matrix composites, Aust. J. Mech. Eng., 1, 10.1080/14484846.2019.1651138
Kanthavel, 2016, Study of tribological properties on Al/Al2O3/MoS2hybrid composite processed by powder metallurgy, Alexandria Eng. J., 55, 13, 10.1016/j.aej.2016.01.024
Kumar, 2016, Influence of rutile (TiO2) content on wear and microhardness characteristics of aluminium-based hybrid composites synthesized by powder metallurgy, Trans. Nonferrous Met. Soc. China (English Ed.), 26, 63, 10.1016/S1003-6326(16)64089-X