Recent advances in slippery liquid-infused surfaces with unique properties inspired by nature
Tóm tắt
Từ khóa
Tài liệu tham khảo
Barthlott W, Neinhuis C (1997) Purity of the sacred lotus, or escape from contamination in biological surfaces. Planta 202:1–8. https://doi.org/10.1007/s004250050096
Sun T, Feng L, Gao X et al (2005) Bioinspired surfaces with special wettability. Acc Chem Res 38(8):644–652. https://doi.org/10.1021/ar040224c
Gangadoo S, Chandra S, Power A et al (2016) Biomimetics for early stage biofouling prevention: templates from insect cuticles. J Mater Chem B 4:5747–5754. https://doi.org/10.1039/C6TB01642A
Bhushan B, Jung YC (2011) Natural and biomimetic artificial surfaces for superhydrophobicity, self-cleaning, low adhesion, and drag reduction. Prog Mater Sci 56(1):1–108. https://doi.org/10.1016/j.pmatsci.2010.04.003
Si Y, Zhu H, Chen L et al (2015) A multifunctional transparent superhydrophobic gel nanocoating with self-healing properties. Chem Commun 51:16794–16797. https://doi.org/10.1039/C5CC06977G
Lu Y, Sathasivam S, Song J et al (2015) Robust self-cleaning surfaces that function when exposed to either air or oil. Science 347(6226):1132–1135. https://doi.org/10.1126/science.aaa0946
Milles S, Soldera M, Kuntze T et al (2020) Characterization of self-cleaning properties on superhydrophobic aluminum surfaces fabricated by direct laser writing and direct laser interference patterning. Appl Surf Sci 525:146518. https://doi.org/10.1016/j.apsusc.2020.146518
Bhushan B, Martin S (2018) Substrate-independent superliquiphobic coatings for water, oil, and surfactant repellency: an overview. J Colloid Interf Sci 526:90–105. https://doi.org/10.1016/j.jcis.2018.04.103
Martin S, Brown PS, Bhushan B (2017) Fabrication techniques for bioinspired, mechanically-durable, superliquiphobic surfaces for water, oil, and surfactant repellency. Adv Colloid Interf Sci 241:1–23. https://doi.org/10.1016/j.cis.2017.01.004
Nishimoto S, Bhushan B (2013) Bioinspired self-cleaning surfaces with superhydrophobicity, superoleophobicity, and superhydrophilicity. RSC Adv 3:671–690. https://doi.org/10.1039/C2RA21260A
Fu JJ, Chen T, Wang MD et al (2013) Acid and alkaline dual stimuli-responsive mechanized hollow mesoporous silica nanoparticles as smart nanocontainers for intelligent anticorrosion coatings. ACS Nano 7(12):11397–11408. https://doi.org/10.1021/nn4053233
Bhushan B, Multanen V (2019) Designing liquid repellent, icephobic and self-cleaning surfaces with high mechanical and chemical durability. Phil Trans R Soc A 377(2138):20180270. https://doi.org/10.1098/rsta.2018.0270
Cremaldi J, Bhushan B (2018) Fabrication of bioinspired, self-cleaning superliquiphilic/phobic stainless steel using different pathways. J Colloid Interf Sci 518:284–297. https://doi.org/10.1016/j.jcis.2018.02.034
Nanda D, Varshney P, Satapathy M et al (2017) Single step method to fabricate durable superliquiphobic coating on aluminum surface with self-cleaning and anti-fogging properties. J Colloid Interf Sci 507:397–409. https://doi.org/10.1016/j.jcis.2017.08.022
Amini S, Kolle S, Petrone L (2017) Preventing mussel adhesion using lubricant-infused materials. Science 357(6352):668–673. https://doi.org/10.1126/science.aai8977
Cameron SW, Smith-Palmer T, Peppou-Chapman S et al (2018) Marine antifouling behavior of lubricant-infused nanowrinkled polymeric surfaces. ACS Appl Mater Interf 10(4):4173–4182. https://doi.org/10.1021/acsami.7b14736
Li H, Shkolyar E, Wang J et al (2020) SLIPS-LAB—a bioinspired bioanalysis systemfor metabolic evaluation of urinary stone disease. Sci Adv 6(21):eaba8535. https://doi.org/10.1126/sciadv.aba8535
Epstein AK, Wong T, Belisle RA et al (2012) Liquid-infused structured surfaces with exceptional anti-biofouling performance. PNAS 109(33):13182–13187. https://doi.org/10.1073/pnas.1201973109
Maccallum N, Howell C, Kim P et al (2015) Liquid-infused silicone as a biofouling-free medical material. ACS Biomater Sci Eng 1(1):43–51. https://doi.org/10.1021/ab5000578
Badv M, Jaffer IH, Weitz JI et al (2017) An omniphobic lubricant-infused coating produced by chemical vapor deposition of hydrophobic organosilanes attenuates clotting on catheter surfaces. Sci Rep 7:11639. https://doi.org/10.1038/s41598-017-12149-1
Goudie MJ, Pant J, Handa H (2017) Liquid-infused nitric oxide-releasing (LINORel) silicone for decreased fouling, thrombosis, and infection of medical devices. Sci Rep 7:13623. https://doi.org/10.1038/s41598-017-14012-9
Manna U, Raman N, Welsh MA et al (2016) Slippery liquid-infused porous surfaces that prevent microbial surface fouling and kill non-adherent pathogens in surrounding media: a controlled release approach. Adv Funct Mater 26(21):3599–3611. https://doi.org/10.1002/adfm.201505522
Wong TS, Kang S, Tang S et al (2011) Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity. Nature 477(7365):443–447. https://doi.org/10.1038/nature10447
Jung S, Tiwari M, Doan N et al (2012) Mechanism of supercooled droplet freezing on surfaces. Nat Commun 3:615. https://doi.org/10.1038/ncomms1630
Grace M, Gao L, Stephen Y et al (2019) Clinical potential of immobilized liquid interfaces: perspectives on biological interactions. Trends Biotechnol 37(3):268–280. https://doi.org/10.1016/j.tibtech.2018.08.003
Young T (1805) An essay on the cohesion of fluidsPhil. Trans R Soc 95:65–87. https://doi.org/10.1098/rstl.1805.0005
Liu J, Fang X, Zhu C et al (2020) Fabrication of superhydrophobic coatings for corrosion protection by electrodeposition: a comprehensive review. Colloid Surf A Physicochem Eng Asp 607:125498. https://doi.org/10.1016/j.colsurfa.2020.125498
Villegas M, Zhang Y, Abu Jarad N et al (2019) Liquid-infused surfaces: a review of theory, design, and applications. ACS Nano 13(8):8517–8536. https://doi.org/10.1021/acsnano.9b04129
Lee K, Kim YS, Shin K (2012) Hierarchically-structured artificial water-repellent leaf surfaces replicated from reusable anodized aluminum oxide. Macromol Res 20:762–767. https://doi.org/10.1007/s13233-012-0111-5
Wenzel RN (1936) Resistance of solid surfaces to wetting by water. Ind Eng Chem 28(8):988–994. https://doi.org/10.1021/ie50320a024
Valipour MN, Birjandi FC, Sargolzaei J (2014) Super-non-wettable surfaces: a review. Colloid Surf A Physicochem Eng Aspects 448:93–106. https://doi.org/10.1016/j.colsurfa.2014.02.016
Yong J, Chen F, Yang Q et al (2017) Superoleophobic surfaces. Chem Soc Rev 46(14):4168–4217. https://doi.org/10.1039/C6CS00751A
Cassie ABD, Baxter S (1944) Wettability of porous surfaces. Trans Faraday Soc 40:546–551. https://doi.org/10.1039/TF9444000546
Bhushan B (2019) Lessons from nature for green science and technology: an overview and bioinspired superliquiphobic/philic surfaces. Phil Trans R Soc A 377(2138):20180274. https://doi.org/10.1098/rsta.2018.0274
Gou X, Guo Z (2019) Surface topographies of biomimetic superamphiphobic materials: design criteria, fabrication and performance. Adv Colloid Interf Sci 269:87–121. https://doi.org/10.1016/j.cis.2019.04.007
Shao Y, Zhao J, Fan Y et al (2020) Shape memory superhydrophobic surface with switchable transition between “Lotus Effect” to “Rose Petal Effect.” Chem Eng J 382:122989. https://doi.org/10.1016/j.cej.2019.122989
Cao M, Guo D, Yu C et al (2016) Water-repellent properties of superhydrophobic and lubricant-infused “slippery” surfaces: a brief study on the functions and applications. ACS Appl Mater Interf 8(6):3615–3623. https://doi.org/10.1021/acsami.5b07881
Liu M, Wang S, Wei Z et al (2009) Bioinspired design of a superoleophobic and low adhesive water/solid interface. Adv Mater 21(6):665–669. https://doi.org/10.1002/adma.200801782
Cai Y, Lin L, Xue Z et al (2014) Filefish-inspired surface design for anisotropic underwater oleophobicity. Adv Funct Mater 24(6):809–816. https://doi.org/10.1002/adfm.201302034
Parker A, Lawrence C (2001) Water capture by a desert beetle. Nature 414:33–34. https://doi.org/10.1038/35102108
Garrod RP, Harris LG, Schofield WCE et al (2007) Mimicking a stenocara beetle’s back for microcondensation using plasmachemical patterned superhydrophobic-superhydrophilic surfaces. Langmuir 23(2):689–693. https://doi.org/10.1021/la0610856
Hou Y, Yu M, Chen X et al (2015) Recurrent filmwise and dropwise condensation on a beetle mimetic surface. ACS Nano 9(1):71–81. https://doi.org/10.1021/nn505716b
Holger F, Bohn WF (2004) Insect aquaplaning: Nepenthes pitcher plants capture prey with the peristome, a fully wettable water-lubricated anisotropic surface. PNAS 101(39):14138–14143. https://doi.org/10.1073/pnas.0405885101
Wang P, Lu Z, Zhang D (2015) Slippery liquid-infused porous surfaces fabricated on aluminum as a barrier to corrosion induced by sulfate reducing bacteria. Corros Sci 93:159–166. https://doi.org/10.1016/j.corsci.2015.01.015
Shi Z, Xiao Y, Qiu R et al (2017) A facile and mild route for fabricating slippery liquid-infused porous surface (SLIPS) on CuZn with corrosion resistance and self-healing properties. Surf Coat Technol 330:102–112. https://doi.org/10.1016/j.surfcoat.2017.09.053
Barati Darband Gh, Aliofkhazraei M, Khorsand S et al (2020) Science and engineering of superhydrophobic surfaces: review of corrosion resistance, chemical and mechanical stability. Arab J Chem 13(1):1763–1802. https://doi.org/10.1016/j.arabjc.2018.01.013
Chen L, Guo Z, Liu W (2017) Outmatching superhydrophobicity: bio-inspired re-entrant curvature for mighty superamphiphobicity in air. J Mater Chem A 5:14480–14507. https://doi.org/10.1039/C7TA03248J
Wang S, Liu K, Yao X et al (2015) Bioinspired surfaces with superwettability: new insight on theory, design, and applications. Chem Rev 115(16):8230–8293. https://doi.org/10.1021/cr400083y
Kim P, Kreder MJ, Alvarenga J et al (2013) Hierarchical or not? Effect of the length scale and hierarchy of the surface roughness on omniphobicity of lubricant-infused substrates. Nano Lett 13(4):1793–1799. https://doi.org/10.1021/nl4003969
Rykaczewski K, Paxson A, Staymates M et al (2014) Dropwise condensation of low surface tension fluids on omniphobic surfaces. Sci Rep 4:4158. https://doi.org/10.1038/srep04158
Grynyov R, Bormashenko E, Whyman G et al (2016) Superoleophobic surfaces obtained via hierarchical metallic meshes. Langmuir 32(17):4134–4140. https://doi.org/10.1021/acs.langmuir.6b00248
Starostin A, Valtsifer V, Strelnikov V et al (2014) Robust technique allowing the manufacture of superoleophobic (omniphobic) metallic surfaces. Adv Eng Mater 16(9):1127–1132. https://doi.org/10.1002/adem.201300561
Ellinas K, Chatzipetrou M, Zergioti I et al (2015) Superamphiphobic polymeric surfaces sustaining ultrahigh impact pressures of aqueous high- and low-surface-tension mixtures, tested with laser-induced forward transfer of drops. Adv Mater 27(13):2231–2235. https://doi.org/10.1002/adma.201405855
Boreyko JB, Polizos G, Datskos PG et al (2014) Air-stable droplet interface bilayers on oil-infused surfaces. Proc Natl Acad Sci USA 111(21):7588–7593. https://doi.org/10.1073/pnas.1400381111
He W, Liu P, Jiang J et al (2018) Development of multifunctional liquid-infused materials by printing assisted functionalization on porous nanocomposites. J Mater Chem A 6:4199–4208. https://doi.org/10.1039/C7TA10780C
Zhao H, Park KC, Law KY (2012) Effect of surface texturing on superoleophobicity, contact angle hysteresis, and “robustness.” Langmuir 28(42):14925–14934. https://doi.org/10.1021/la302765t
Chen J, Long M, Peng S et al (2017) Superamphiphobic aluminum surfaces that maintain robust stability after undergoing severe chemical and physical damage. N J Chem 41(3):1334–1345. https://doi.org/10.1039/C6NJ03696A
Sun Y, Wang L, Gao Y et al (2015) Preparation of stable superamphiphobic surfaces on Ti-6Al-4V substrates by one-step anodization. Appl Surf Sci 324:825–830. https://doi.org/10.1016/j.apsusc.2014.11.047
Hao L, Yu S, Han X et al (2015) Design of submicron structures with superhydrophobic and oleophobic properties on zinc substrate. Mater Des 85:653–660. https://doi.org/10.1016/j.matdes.2015.07.057
Liu Y, Zhao L, Lin J et al (2019) Electrodeposited surfaces with reversibly switching interfacial properties. Sci Adv 5(11):eaax0380. https://doi.org/10.1126/sciadv.aax0380
Liu Q, Yang Y, Huang M et al (2015) Durability of a lubricant-infused electrospray silicon rubber surface as an anti-icing coating. Appl Surf Sci 346:68–76. https://doi.org/10.1016/j.apsusc.2015.02.051
Hou L, Wang N, Wu J et al (2018) Bioinspired superwettability electrospun micro/nanofibers and their applications. Adv Funct Mater 28:1801114. https://doi.org/10.1002/adfm.201801114
Lee MW, An S, Latthe SS et al (2013) Electrospun polystyrene nanofiber membrane with superhydrophobicity and superoleophilicity for selective separation of water and low viscous oil. Appl Mater Interf 5(21):10597–10604. https://doi.org/10.1021/am404156k
Doll K, Fadeeva E, Schaeske J et al (2017) Development of laser-structured liquid-infused titanium with strong biofilm-repellent properties. ACS Appl Mater Interf 9(11):9359–9368. https://doi.org/10.1021/acsami.6b16159
Doll K, Yang I, Fadeeva E et al (2019) Liquid-infused structured titanium surfaces: antiadhesive mechanism to repel streptococcus oralis biofilms. ACS Appl Mater Interf 11(26):23026–23038. https://doi.org/10.1021/acsami.9b06817
Hosseini A, Villegas M, Yang J et al (2018) Conductive electrochemically active lubricant-infused nanostructured surfaces attenuate cagulation and enable friction-less droplet manipulation. Adv Mater Interf 5:1800617. https://doi.org/10.1002/admi.201800617
Zouaghi S, Six T, Bellayer S et al (2017) Antifouling biomimetic liquid-infused stainless steel: application to dairy industrial processing. ACS Appl Mater Interf 9(31):26565–26573. https://doi.org/10.1021/acsami.7b06709
Ouyang Y, Zhao J, Qiu R et al (2020) Nanowall enclosed architecture infused by lubricant: a bio-inspired strategy for inhibiting bio-adhesion and bio-corrosion on stainless steel. Surf Coat Technol 381:125143. https://doi.org/10.1016/j.surfcoat.2019.125143
Ouyang Y, Zhao J, Qiu R et al (2019) Liquid infused surface based on hierarchical dendritic iron wire array: an exceptional barrier to prohibit biofouling and biocorrosion. Prog Org Coat 136:105216. https://doi.org/10.1016/j.porgcoat.2019.105216
Awad TS, Asker D, Hatton BD (2018) Food-safe modification of stainless steel food-processing surfaces to reduce bacterial biofilms. ACS Appl Mater Interf 10(27):22902–22912. https://doi.org/10.1021/acsami.8b03788
Ma Q, Wang W, Dong G (2019) Facile fabrication of biomimetic liquid-infused slippery surface on carbon steel and its self-cleaning, anti-corrosion, anti-frosting and tribological properties. Colloid Surf A Physicochem Eng Asp 577:17–26. https://doi.org/10.1016/j.colsurfa.2019.05.008
Sousa MFB, Loureiro HC, Bertran CA (2020) Anti-scaling performance of slippery liquid-infused porous surface (SLIPS) produced onto electrochemically-textured 1020 carbon steel. Surf Coat Technol 382:125160. https://doi.org/10.1016/j.surfcoat.2019.125160
Ouyang Y, Zhao J, Qiu R et al (2019) Biomimetics leading to liquid-infused surface based on vertical dendritic Co matrix: a barrier to inhibit bioadhesion and microbiologically induced corrosion. Colloid Surf A: Physicochem Eng Asp 583:124006. https://doi.org/10.1016/j.colsurfa.2019.124006
Liu C, Li Y, Lu C et al (2020) Robust slippery liquid-infused porous network surfaces for enhanced anti-icing/deicing performance. ACS Appl Mater Interf 12(22):25471–25477. https://doi.org/10.1021/acsami.0c05954
Jiang D, Xia X, Hou J et al (2019) A novel coating system with self-reparable slippery surface and active corrosion inhibition for reliable protection of Mg alloy. Chem Eng J 373:285–297. https://doi.org/10.1016/j.cej.2019.05.046
Subramanyam SB, Azimi G, Varanasi KK (2014) Designing lubricant-impregnated textured surfaces to resist scale formation. Adv Mater Interf 1:1300068. https://doi.org/10.1002/admi.201300068
Guo H, Fuchs P, Casdorff K et al (2017) Bio-inspired superhydrophobic and omniphobic wood surfaces. Adv Mater Interf 4:1600289. https://doi.org/10.1002/admi.201600289
Wang J, Lu Y, Chu Q et al (2020) Facile construction of superhydrophobic surfaces by coating fluoroalkylsilane/silica composite on a modified hierarchical structure of wood. Polymers 12(4):813. https://doi.org/10.3390/polym12040813
Vena A, Kolle S, Stafslien S et al (2020) Self-stratifying porous silicones with enhanced liquid infusion and protective skin layer for biofouling prevention. Adv Mater Interf 8:2000359. https://doi.org/10.1002/admi.202000359
Basu S, Hanh BM, Isaiah Chua JQ et al (2020) Green biolubricant infused slippery surfaces to combat marine biofouling. J Colloid Interf Sci 568:185–197. https://doi.org/10.1016/j.jcis.2020.02.049
Yong J, Chen F, Yang Q et al (2017) Nepenthes inspired design of self-repairing mmniphobic slippery liquid infused porous surface (SLIPS) by femtosecond laser direct writing. Adv Mater Interf 4:1700552. https://doi.org/10.1002/admi.201700552
Manna U, Lynn DM (2015) Fabrication of liquid-infused surfaces using reactive polymer multilayers: principles for manipulating the behaviors and mobilities of aqueous fluids on slippery liquid interfaces. Adv Mater 27(19):3007–3012. https://doi.org/10.1002/adma.201500893
Agrawal P, Salomons TT, Chiriac DS et al (2019) Facile actuation of organic and aqueous droplets on slippery liquid-infused porous surfaces for the application of on-chip polymer synthesis and liquid-liquid extraction. ACS Appl Mater Interf 11(31):28327–28335. https://doi.org/10.1021/acsami.9b08849Error!Hyperlinkreferencenotvalid
Howell C, Vu TL, Johnson CP et al (2015) Stability of surface-immobilized lubricant interfaces under flow. Chem Mater 27(5):1792–1800. https://doi.org/10.1021/cm504652g
Sett S, Yan X, Barac G et al (2017) Lubricant-infused surfaces for low-surface-tension fluids: promise versus reality. ACS Appl Mater Interf 9(41):36400–36408. https://doi.org/10.1021/acsami.7b10756
Peppou-Chapman S, Hong JK, Waterhouse A et al (2020) Life and death of liquid-infused surfaces: a review on the choice, analysis and fate of the infused liquid layer. Chem Soc Rev 49(11):3688–3715. https://doi.org/10.1039/D0CS00036A
Tian X, Banerjee S, Gonzalez-Alfonzo I et al (2020) Suppressing evaporative loss in slippery liquid-infused porous surfaces (SLIPS) with self-suspended perfluorinated nanoparticles. Langmuir 36(19):5106–5111. https://doi.org/10.1021/acs.langmuir.0c00160
Rao Q, Zhang J, Zhan X et al (2020) UV-driven self-replenishing slippery surfaces with programmable droplet-guiding pathways. J Mater Chem A 8:2481–2489. https://doi.org/10.1039/C9TA11723G
Zhao H, Sun Q, Deng X et al (2018) Earthworm-inspired rough polymer coatings with self-replenishing lubrication for adaptive friction-reduction and antifouling surfaces. Adv Mater 30:1802141. https://doi.org/10.1002/adma.201802141
Zhang D, Xia Y, Chen X et al (2019) PDMS-infused poly(high internal phase emulsion) templates for the construction of slippery liquid-infused porous surfaces with self-cleaning and self-repairing properties. Langmuir 35(25):8276–8284. https://doi.org/10.1021/acs.langmuir.9b01115
Jing X, Guo Z (2019) Fabrication of biocompatible super stable lubricant-immobilized slippery surfaces by grafting a polydimethylsiloxane brush: excellent boiling water resistance, hot liquid repellency and long-term slippery stability. Nanoscale 11(18):8870–8881. https://doi.org/10.1039/C9NR01556F
Meuler AJ, McKinley GH, Cohen RE (2010) Exploiting topographical texture to impart icephobicity. ACS Nano 4:7048–7052. https://doi.org/10.1021/nn103214q
Kim P, Wong T-S, Alvarenga J et al (2012) Liquid-infused nanostructured surfaces with extreme anti-ice and anti-frost performance. ACS Nano 6(8):6569–6577. https://doi.org/10.1021/nn302310q
Vazirinasab E, Maghsoudi K, Jafari R et al (2020) A comparative study of the icephobic and self-cleaning properties of Teflon materials having different surface morphologies. J Mater Process Technol 276:116415. https://doi.org/10.1016/j.jmatprotec.2019.116415
Latthe SS, Sutar RS, Bhosale AK et al (2019) Recent developments in air-trapped superhydrophobic and liquid-infused slippery surfaces for anti-icing application. Prog Org Coat 137:105373. https://doi.org/10.1016/j.porgcoat.2019.105373
Zhao L, He L, Liang J et al (2020) Facile preparation of a slippery oil-infused polymer surface for robust icephobicity. Prog Org Coat 148:105849. https://doi.org/10.1016/j.porgcoat.2020.105849
Tourkine P, Merrer ML, Quere D (2009) Delayed freezing on water repellent materials. Langmuir 25(13):7214–7216. https://doi.org/10.1021/la900929u
Jung S, Dorrestijn M, Raps D et al (2011) Are superhydrophobic surfaces best for icephobicity? Langmuir 27(6):3059–3066. https://doi.org/10.1021/la104762g
Chen J, Liu J, He M et al (2012) Superhydrophobic surfaces cannot reduce ice adhesion. Appl Phys Lett 101:111603. https://doi.org/10.1063/1.4752436
Wilson PW, Lu W, Xu H et al (2013) Inhibition of ice nucleation by slippery liquid-infused porous surfaces (SLIPS). Phys Chem Chem Phys 15(2):581–585. https://doi.org/10.1039/C2CP43586A
Juuti P, Haapanen J, Stenroos C et al (2017) Achieving a slippery, liquid-infused porous surface with anti-icing properties by direct deposition of flame synthesized aerosol nanoparticles on a thermally fragile substrate. Appl Phys Lett 110:161603. https://doi.org/10.1063/1.4981905
Long Y, Yin X, Mu P et al (2020) Slippery liquid-infused porous surface (SLIPS) with superior liquid repellency, anti-corrosion, anti-icing and intensified durability for protecting substrates. Chem Eng J 401:126137. https://doi.org/10.1016/j.cej.2020.126137
Li J, Feng X, Liu B et al (2017) Polymer materials for prevention of postoperative adhesion. Acta Biomater 61:21–40. https://doi.org/10.1016/j.actbio.2017.08.002
Leslie DC, Waterhouse A, Berthet JB et al (2014) A bioinspired omniphobic surface coating on medical devices prevents thrombosis and biofouling. Nat Biotechnol 32(11):1134–1140. https://doi.org/10.1038/nbt.3020
Yuan S, Luan S, Yan S et al (2015) Facile fabrication of lubricant-infused wrinkling surface for preventing thrombus formation and infection. ACS Appl Mater Interf 7(34):19466–19473. https://doi.org/10.1021/acsami.5b05865
Badv M, Imani SM, Weitz JI et al (2018) Lubricant-infused surfaces with built-in functional biomolecules exhibit simultaneous repellency and tunable cell adhesion. ACS Nano 12(11):10890–10902. https://doi.org/10.1021/acsnano.8b03938
Howell C, Grinthal A, Sunny S et al (2018) Designing liquid-infused surfaces for medical applications: a review. Adv Mater 30(50):e1802724. https://doi.org/10.1002/adma.201802724
Zou M, Zhao X, Zhang X et al (2020) Bio-inspired multiple composite film with anisotropic surface wettability and adhesion for tissue repair. Chem Eng J 398:125563. https://doi.org/10.1016/j.cej.2020.125563
Beyzavi A, Nguyen N-T (2010) Programmable two-dimensional actuation of ferrofluid droplet using planar microcoils. J Micromech Microeng 20(1):015018. https://doi.org/10.1088/0960-1317/20/1/015018
Luo JT, Geraldi NR, Guan JH et al (2017) Slippery liquid-infused porous surfaces and droplet transportation by surface acoustic waves. Phys Rev Appl 7:014017. https://doi.org/10.1103/PhysRevApplied.7.014017
Ting TH, Yap YF, Nguyen NT et al (2006) Thermally mediated breakup of drops in microchannels. Appl Phys Lett 89:234101. https://doi.org/10.1063/1.2400200
Gao W, Wang J, Zhang X et al (2020) Electric-tunable wettability on a paraffin-infused slippery pattern surface. Chem Eng J 381:122612. https://doi.org/10.1016/j.cej.2019.122612
Chen C, Huang Z, Jiao Y et al (2019) In situ reversible control between sliding and pinning for diverse liquids under ultra-low voltage. ACS Nano 13(5):5742–5752. https://doi.org/10.1021/acsnano.9b01180
Guo T, Che P, Heng L et al (2016) Anisotropic slippery surfaces: electric-driven smart control of a drop’s slide. Adv Mater 28(32):6999–7007. https://doi.org/10.1002/adma.201601239