Recent advances in biodegradable electronics- from fundament to the next-generation multi-functional, medical and environmental device

Irimia-Vladu, 2014, “Green” electronics: biodegradable and biocompatible materials and devices for sustainable future, Chem. Soc. Rev., 43, 588, 10.1039/C3CS60235D Eiichi, 2006, Recent developments of polar piezoelectric polymers, IEEE Trans. Dielectr. Electr. Insul., 13, 1111 Cabedo, 2006, Optimization of biodegradable nanocomposites based on a PLA/PCL blends for food packaging applications, Macromol. Symp., 233, 191, 10.1002/masy.200690017 Shi, 2022, Advance in energy harvesters/nanogenerators and self-powered sensors, Nanomaterials, 12, 3167, 10.3390/nano12183167 Gao, 2016, Natural materials assembled, biodegradable, and transparent paper-based electret nanogenerator, ACS Appl. Mater. Interfaces, 8, 35587, 10.1021/acsami.6b12913 Zhu, 2018, Suspended polytetrafluoroethylene nanostructure electret film in dual variable cavities for self-powered micro-shock sensing, Mater. Res. Express, 6, 1 Nagarajan, 2016, Perspective on polylactic acid (PLA) based sustainable materials for durable applications: focus on toughness and heat resistance, ACS Sustain. Chem. Eng., 4, 2899, 10.1021/acssuschemeng.6b00321 Sun, 2018, Nanofiller reinforced biodegradable PLA/PHA composites: current status andfuture trends, Polymers, 10, 505, 10.3390/polym10050505 Yang, 2009, Power generation with laterally packaged piezoelectric fine wires, Nat. Nanotechnol., 4, 34, 10.1038/nnano.2008.314 Ahmad, 2011, Modeling of MEMS piezoelectric energy harvesters using electromagnetic and power system theories, Smart Mater. Struct., 20, 10.1088/0964-1726/20/8/085001 Ali, 2014, Gas barrier properties of biodegradable polymer nanocomposites films, Chem. Mater. Res., 6, 44 Jing, 2018, Nanostructured polymer-based piezoelectric and triboelectric materials and devices for energy harvesting applications, J. Phys. D. Appl. Phys., 51, 303001, 10.1088/1361-6463/aac827 Keller, 2011, Deposition of biopolymer films on micromechanical sensors, Microelectron. Eng., 88, 2297, 10.1016/j.mee.2011.02.093 Li, 2018, Materials and devices for biodegradable and soft biomedical electronics, Materials, 11, 2108, 10.3390/ma11112108 Pang, 2018, An alginate film-based degradable triboelectric nanogenerator, RSC Adv., 8, 6719, 10.1039/C7RA13294H Sheng, 2018, Biodegradable poly(l-lactic acid) (PLLA) coatings fabricated from nonsolvent induced phase separation for improving corrosion resistance of magnesium rods in biological fluids, Langmuir, 34, 10684, 10.1021/acs.langmuir.8b02322 Yoon, 2017, Biodegradation and biocompatibility of poly L-lactic acid implantable mesh, Int. Neurourol. J., 21, S48, 10.5213/inj.1734882.441 Sha, 2016, Polylactic acid based nanocomposites: promising safe and biodegradable materials in biomedical field, Int. J. Polym. Sci., 2016, 6869154, 10.1155/2016/6869154 Takarada, 2013, Fundamental study on vibration in edge face of piezoelectric chiral polymer film, Jpn. J. Appl. Phys., 52, 10.7567/JJAP.52.09KE01 Li, 2020, Tacticity-dependent epitaxial crystallization of poly(l-lactic acid) on an oriented polyethylene substrate, Macromolecules, 53, 8487, 10.1021/acs.macromol.0c01456 Zhu, 2018, Single electrode nylon fibers enhanced polytetrafluoroethylene electret film with hollow cylinder structure for mechanical energy harvesting, Energy Technol., 6, 1, 10.1002/ente.201700779 Gao, 2018, Tailoring crystalline morphology by high-efficiency nucleating fiber: toward high-performance poly(l-lactide) biocomposites, ACS Appl. Mater. Interfaces, 10, 20044, 10.1021/acsami.8b04907 Mao, 2015, Properties of aligned poly(L-lactic acid) electrospun fibers, J. Appl. Polym. Sci., 132, 41779, 10.1002/app.41779 Tuck, 2012, Critical variables in the alignment of electrospun PLLA nanofibers, Mater. Sci. Eng. C, 32, 1779, 10.1016/j.msec.2012.04.060 Koide, 2012, Effect of the cast-solvent on the morphology of cast films formed with a mixture of stereoisomeric poly(lactic acids), Polym. J., 45, 645, 10.1038/pj.2012.192 Meng, 2005, Colorful PLLA film fabricated by solution-cast process in humid atmosphere, J. Korean Phys. Soc., 46, S16 Curry, 2018, Biodegradable piezoelectric force sensor, PNAS, 115, 909, 10.1073/pnas.1710874115 Zhu, 2017, Electrospinning poly(L-lactic acid) piezoelectric ordered porous nanofibers for strain sensing and energy harvesting, J. Mater. Sci. Mater. Electron., 28, 12080, 10.1007/s10854-017-7020-5 Mozafari, 2019, Mechanical characterizations of 3D-printed PLLA/steel particle composites, Materials, 12, 1, 10.3390/ma12010001 Oh, 2020, Fabrication of piezoelectric poly(L-lactic acid)/BaTiO3 fibre by the melt-spinning process, Sci. Rep., 10, 16339, 10.1038/s41598-020-73261-3 Hayashi, 2015, Piezoelectric characteristics of three-dimensional solid object of poly(l-lactide) fabricated by three-dimensional printing, Jpn. J. Appl. Phys., 54, 10.7567/JJAP.54.10NF01 Li, 2020, Poly-l-lactic acid/graphene electrospun composite nanofibers for wearable sensors, Energy Technol., 8, 1901252, 10.1002/ente.201901252 Boutry, 2018, A stretchable and biodegradable strain and pressure sensor for orthopaedic application, Nat. Electron., 1, 314, 10.1038/s41928-018-0071-7 Liu, 2007, Multi-walled carbon nanotubes/poly(L-lactide) nanocomposite strain sensor for biomechanical implants, 27, 119 Tajitsu, 2017, Piezoelectric poly-L-lactic acid fabric and its application to control of humanoid robot, Ferroelectrics, 515, 44, 10.1080/00150193.2017.1360107 Curry, 2020, Biodegradable nanofiber-based piezoelectric transducer, PNAS, 117, 214, 10.1073/pnas.1910343117 Ando, 2013, Pressure-sensitive touch panel based on piezoelectric poly(L-lactic acid) film, Jpn. J. Appl. Phys., 52, 10.7567/JJAP.52.09KD17 Tajitsu, 2020, Piezoelectric “Kumihimo-gumi” sensor fabricated by braiding method using piezoelectric poly-L-lactic acid fiber, Ferroelectrics, 557, 43, 10.1080/00150193.2020.1713362 Tajitsu, 2020, Development of e-textile sewn together with embroidered fabric having motion-sensing function using piezoelectric braided cord for embroidery, IEEE Trans. Dielectr. Electr. Insul., 27, 1644, 10.1109/TDEI.2020.008448 Ando, 2012, Film sensor device fabricated by a piezoelectric poly(L-lactic acid) film, Jpn. J. Appl. Phys., 51, 10.1143/JJAP.51.09LD14 Guo, 2019, A wearable transient pressure sensor made with MXene nanosheets for sensitive broad-range human–machine interfacing, Nano Lett., 19, 1143, 10.1021/acs.nanolett.8b04514 Feng, 2020, Printed soft optical waveguides of PLA copolymers for guiding light into tissue, ACS Appl. Mater. Interfaces, 12, 20287, 10.1021/acsami.0c03903 Zhao, 2019, Fabrication of transparent paper-based flexible thermoelectric generator for wearable energy harvester using modified distributor printing technology, ACS Appl. Mater. Interfaces, 11, 10301, 10.1021/acsami.8b21716 Zhang, 2019, Skin-friendly electronics for acquiring human physiological signatures, Adv. Mater., 31, 1905767, 10.1002/adma.201905767 Liu, 2018, Flexible, degradable, and cost-effective strain sensor fabricated by a scalable papermaking procedure, ACS Sustain. Chem. Eng., 6, 15749, 10.1021/acssuschemeng.8b04298 Liu, 2020, Flexible and degradable multimodal sensor fabricated by transferring laser-induced porous carbon on starch film, ACS Sustain. Chem. Eng., 8, 527, 10.1021/acssuschemeng.9b05968 Pal, 2018, Fabrication of flexible, fully organic, degradable energy storage devices using silk proteins, ACS Appl. Mater. Interfaces, 10, 9620, 10.1021/acsami.7b19309 Kim, 2021, Biodegradable molybdenum/polybutylene adipate terephthalate conductive paste for flexible and stretchable transient electronics, Adv. Mater. Technol., 7, 2001297, 10.1002/admt.202001297 Koschwanez, 2008, In vitro and in vivo characterization of porous poly-L-lactic acid coatings for subcutaneously implanted glucose sensors, J. Biomed. Mater. Res., 87A, 792, 10.1002/jbm.a.31824 Al-Marjeh, 2019, Adsorption of methyl orange onto electrospun nanofiber membranes of PLLA coated with pTSA-PANI, Environ. Sci. Pollut. Res., 26, 37282, 10.1007/s11356-019-06654-1 Barati, 2019, In vitro differentiation of conjunctiva mesenchymal stem cells into insulin producing cells on natural and synthetic electrospun scaffolds, Biologicals, 62, 33, 10.1016/j.biologicals.2019.10.004 Sun, 2021, A smart nanofibre sensor based on anthocyanin/poly-l-lactic acid for mutton freshness monitoring, Int. J. Food Sci. Technol., 56, 342, 10.1111/ijfs.14648 Luo, 2020, Pranoprofen nanoparticles with poly(L-Lactide)-b-poly(ethylene glycol)-b-poly(L-lactide) as the matrix toward improving ocular anti-inflammation, Front. Bioeng. Biotechnol., 8, 581621, 10.3389/fbioe.2020.581621 Walker, 2017, Using an environmentally benign and degradable elastomer in soft robotics, Int. J. Intell. Robot. Appl., 1, 124, 10.1007/s41315-017-0016-8 Fu, 2018, Bioinspired living structural color hydrogels, Sci. Robot., 3, 10.1126/scirobotics.aar8580 Chen, 2020, Seawater degradable triboelectric nanogenerators for blue energy, Adv. Mater. Technol., 5, 2000455, 10.1002/admt.202000455 Zheng, 2016, Biodegradable triboelectric nanogenerator as a life-time designed implantable power source, Sci. Adv., 2, 3, 10.1126/sciadv.1501478 Wu, 2020, Fully biodegradable water droplet energy harvester based on leaves of living plants, ACS Appl. Mater. Interfaces, 12, 56060, 10.1021/acsami.0c17601 Gong, 2020, Transparent, stretchable and degradable protein electronic skin for biomechanical energy scavenging and wireless sensing, Biosens. Bioelectron., 169, 112567, 10.1016/j.bios.2020.112567 Xu, 2021, Stretchable, stable, and degradable silk fibroin enabled by mesoscopic doping for finger motion triggered color/transmittance adjustment, ACS Nano, 15, 12429, 10.1021/acsnano.1c05257 Ma, 2021, Design of biodegradable wheat-straw based triboelectric nanogenerator as self-powered sensor for wind detection, Nano Energy, 86, 106032, 10.1016/j.nanoen.2021.106032 Bai, 2021, Autonomously adhesive, stretchable, and transparent solid-state polyionic triboelectric patch for wearable power source and tactile sensor, Adv. Funct. Mater., 31, 2104365, 10.1002/adfm.202104365 Tang, 2021, Hybridized wearable patch as a multi-parameter and multi-functional human-machine interface, Nano Energy, 81, 105582, 10.1016/j.nanoen.2020.105582 Wen, 2020, Advances in chemical sensing technology for enabling the next-generation self-sustainable integrated wearable system in the IoT era, Nano Energy, 78, 105155, 10.1016/j.nanoen.2020.105155 Dong, 2020, Wearable triboelectric/aluminum nitride nano-energy-nano-system with self-sustainable photonic modulation and continuous force sensing, Adv. Sci., 7, 1903636, 10.1002/advs.201903636 Zhu, 2021, Volatile organic compounds sensing based on bennet doubler-inspired triboelectric nanogenerator and machine learning-assisted ion mobility analysis, Sci. Bull., 66, 1176, 10.1016/j.scib.2021.03.021 Zhu, 2021, Toward healthcare diagnoses by machine learning-enabled volatile organic compound identification, ACS Nano, 15, 894, 10.1021/acsnano.0c07464 Zhu, 2020, Continuous direct current by charge transportation for next-generation IoT and real-time virtual reality applications, Nano Energy, 73, 104760, 10.1016/j.nanoen.2020.104760 Zhu, 2020, Development trends and perspectives of future sensors and MEMS/NEMS, Micromachines, 11, 541 Zhu, 2020, Progress in TENG technology–a journey from energy harvesting to nanoenergy and nanosystem (NENS), Ecomat, 2, 1 Shi, 2019, Minimalist and multi-functional human machine interface (HMI) using a flexible wearable triboelectric patch, Nano Energy, 62, 355, 10.1016/j.nanoen.2019.05.033 Wang, 2016, Toward self-powered wearable adhesive skin patch with bendable microneedle array for transdermal drug delivery, Adv. Sci., 3, 1500441, 10.1002/advs.201500441 Hassani, 2020, Smart materials for smart healthcare–moving from sensors and actuators to self-sustained nanoenergy nanosystems, Smart Mat Med., 1, 92 Zhu, 2018, A flexible comb electrode triboelectric-electret nanogenerator with separated microfibers for self-powered position, motion direction and acceleration tracking sensor, J. Mater. Chem. A, 6, 16548, 10.1039/C8TA04443K Zhu, 2018, Zinc oxide enhanced piezoelectret polypropylene microfibers for mechanical energy harvesting, ACS Appl. Mater. Interfaces, 10, 19940, 10.1021/acsami.8b02458 Xiao, 2018, Silicone-based triboelectric nanogenerator for water wave energy harvesting, ACS Appl. Mater. Interfaces, 10, 3616, 10.1021/acsami.7b17239 Zhu, 2018, A hybrid piezoelectric and triboelectric nanogenerator with PVDF nanoparticles and leaf-shaped microstructure PTFE film for scavenging mechanical energy, Adv. Mater. Interfaces, 5, 1700750, 10.1002/admi.201700750 Liu, 2021, Chirality-induced giant unidirectional magnetoresistance in twisted bilayer graphene, Innovation, 2, 100085 Qu, 2021, Adsorption and desorption mechanisms on graphene oxide nanosheets: kinetics and tuning, Innovation, 2, 100137 Wu, 2017, Reduced graphene-oxide acting as electron-trapping sites in the friction layer for giant triboelectric enhancement, Nano Energy, 32, 542, 10.1016/j.nanoen.2016.12.035 Xu, 2017, Fully self-healing and shape-tailorable triboelectric nanogenerators based on healable polymer and magnetic-assisted electrode, Nano Energy, 40, 399, 10.1016/j.nanoen.2017.08.045 Parida, 2017, Highly transparent, stretchable, and self-healing ionic-skin triboelectric nanogenerators for energy harvesting and touch applications, Adv. Mater., 29, 1702181, 10.1002/adma.201702181 Lee, 2015, Shape memory polymer-based self-healing triboelectric nanogenerator, Energy Environ. Sci., 8, 3605, 10.1039/C5EE02711J Ji, 2016, Soft tunable diffractive optics with multifunctional transparent electrodes enabling integrated actuation, Appl. Phys. Lett., 109, 191901, 10.1063/1.4967001 Wang, 2016, A one-structure-based hybridized nanogenerator for scavenging mechanical and thermal energies by triboelectric-piezoelectric-pyroelectric effects, Adv. Mater., 28, 2881, 10.1002/adma.201505684 Wu, 2019, Flexible composite-nanofiber based piezo-triboelectric nanogenerators for wearable electronics, J. Mater. Chem. A, 7, 13347, 10.1039/C9TA02345C Qin, 2018, Hybrid piezo/triboelectric-driven self-charging electrochromic supercapacitor power package, Adv. Energy Mater., 8, 1800069, 10.1002/aenm.201800069 Chen, 2017, Quantifying energy harvested from contact-mode hybrid nanogenerators with cascaded piezoelectric and triboelectric units, Adv. Energy Mater., 7, 1, 10.1002/aenm.201601569 Zhu, 2018, A flexible multi-layer electret nanogenerator for bending deformation energy harvesting and strain sensing, Mater. Res. Bull., 102, 130, 10.1016/j.materresbull.2018.02.020 Zhu, 2017, Hybrid electromagnetic and triboelectric nanogenerators with multi-impact for wideband frequency energy harvesting, Energies, 10, 2024, 10.3390/en10122024 Chen, 2017, Tunable optical modulator by coupling a triboelectric nanogenerator and a dielectric elastomer, Adv. Funct. Mater., 27, 1603788, 10.1002/adfm.201603788 Wang, 2015, Progress in triboelectric nanogenerators as a new energy technology and self-powered sensors, Energy Environ. Sci., 8, 2250, 10.1039/C5EE01532D Zhu, 2022, Machine learning-augmented wearable triboelectric human-machine interface in motion identification and virtual reality, Nano Energy, 103, 107766, 10.1016/j.nanoen.2022.107766 Zhu, 2022, Recent advances in gas and environmental sensing: from micro/nano to the era of self-powered and artificial intelligent (AI)-enabled device, Microchem. J., 181, 107833, 10.1016/j.microc.2022.107833 Zhang, 2022, Miniature and tunable high voltage-driven soft electroactive biconvex lenses for optical visual identification, J. Micromech. Microeng., 32, 10.1088/1361-6439/ac6aa5 Hu, 2022, Advances in electrochemical detection electrodes for As(III), Nanomaterials, 12, 781, 10.3390/nano12050781 Wang, 2022, A biodegradable cellulose-based flame-retardant triboelectric nanogenerator for fire warning, Chem. Eng. J., 450, 137985, 10.1016/j.cej.2022.137985 Wang, 2020, Facile preparation of self-assembled black phosphorus-dye composite films for chemical gas sensors and surface-enhanced raman scattering performances, ACS Sustain. Chem. Eng., 8, 4521, 10.1021/acssuschemeng.9b07840 He, 2019, Facile preparation of self-assembled layered double hydroxide-based composite dye films as new chemical gas sensors, ACS Sustain. Chem. Eng., 7, 10888, 10.1021/acssuschemeng.9b01780