Recent Developments in Friction Stir Welding of Al-alloys
Tóm tắt
Từ khóa
Tài liệu tham khảo
W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P.Temple-Smith, and C.J. Dawes, International Patent Application No. PCT/GB92/02203 and GB Patent Application No. 9125978.8 and US Patent Application No. 5,460,317, Dec 1991
W.M. Thomas and E.D. Nicholas, Friction Stir Welding for the Transportation İndustries, Mater. Des., 1997, 18, p 269–273
C.J. Dawes and W.M. Thomas, Friction Stir Process Welds Aluminum Alloys, Weld. J., 1996, 75, p 41–45
W.B. Lee, Y.M. Yeon, and S.B. Jung, The İmprovement of Mechanical Properties of Friction Stir Welded A356 Al Alloy, Mater. Sci. Eng. A, 2003, 355A, p 154–159
C.G. Rhodes, M.W. Mahoney, W.H. Bingel, R.A. Spurling, and C.C. Bampton, Effects of Friction Stir Welding on Microstructure of 7075 Aluminum, Scripta Mater., 1997, 36, p 69–75
M.W. Mahoney, C.G. Rhodes, J.G. Flintoff, R.A. Spurling, and W.H. Bingel, Properties of Friction Stir Welded 7075 T651 Aluminum, Metall. Mater. Trans. A, 1998, 29, p 1955–1964
L.E. Murr, G. Liu, and J.C. McClure, A TEM Study of Precipitation and Related Microstructures in Friction-stir Welded 6061 Aluminum, J. Mater. Sci., 1998, 33, p 1243–1251
O.V. Flores, C. Kennedy, L.E. Murr, D. Brown, S. Pappu, B.M. Nowak, and J.C. McClure, Microstructural İssues in a Friction-stir-welded Aluminum Alloy, Scripta Mater., 1998, 38, p 703–708
Y.S. Sato, H. Kokawa, M. Enomoto, S. Jogan, and T. Hashimoto, Precipitation Sequence in Friction Stir Weld of 6063 Aluminum During Aging, Metall. Mater. Trans. A, 1991, 30, p 3125–3130
K.V. Jata and S.L. Semiatin, Continuous Dynamic Recrystallization During Friction Stir Welding of High Strength Aluminum Alloys, Scripta Mater., 2000, 43, p 743–749
G. Çam and M. Koçak, Joining of Advanced Materials, Area 6: Materials Science and Engineering, Topic 6.36.4: Materials Processing and Manufacturing Technologies, Encyclopedia of Life Support Systems (EOLSS), Developed under the auspices of the UNESCO, R.D. Rawlings, Ed., Eolss Publishers, Oxford, UK (online), 2002-2014. http://www.eolss.net/
A. von Strombeck, G. Çam, J.F. dos Santos, V. Ventzke, and M. Koçak, A Comparison Between Microstructure, Properties, and Toughness Behavior of Power Beam and Friction Stir Welds in Al-alloys, Proc. of the TMS 2001 Annual Meeting Aluminum, Automotive and Joining, S.K. Das, J.G. Kaufman, and T.J. Lienert, Eds., Feb 12-14, 2001 (New Orleans, Louisiana, USA), TMS, Warrendale, PA, USA, 2001, p 249-264
P.L. Threadgill, A.J. Leonard, H.R. Shercliff, and P.J. Withers, Friction Stir Welding of Aluminium Alloys, Int. Mater. Rev., 2009, 54, p 49–93
R. Nandan, T. DebRoy, and H.K.D.H. Bhadeshia, Recent Advances in Friction Stir Welding-Process, Weldment Structure and Properties, Prog. Mater. Sci., 2008, 53, p 980–1023
G. Campbell and T. Stotler, Friction Stir Welding of Armor Grade Aluminum Plate, Weld. J., 1999, 78, p 45–47
P.L. Threadgill, Terminology in Friction Stirwelding, Sci. Technol. Weld. Join., 2007, 12, p 357–360
M.M. Attallah, C.L. Davies, and M. Strangwood, Influence of Base Metal Microstructure on Microstructural Development in Aluminium Based Alloy Friction Stir Welds, Sci. Technol. Weld. Join., 2007, 12, p 361–369
S.W. Kallee, J. Davenport, and E.D. Nicholas, Railway Manufacturers implement friction Stir Welding, Weld. J., 2002, 81, p 47–50
M.R. Johnsen, Friction Stir Welding Takes off at Boeing, Weld. J., 1999, 78, p 35–39
J. Ding, R. Carter, K. Lawless, A. Nunes, C. Russel, M. Suits, and J. Schneider, Friction Stir Welding Flies High at NASA, Weld. J., 2006, 85, p 54–59
D.G. Staines, W.M. Thomas, S.W. Kallee, and P.J. Oakley, Friction Stir Technology—Recent Developments in Process Variants and Applications, COM 2006, Oct 1-4 2006
W.M. Thomas, Friction Stir Welding and Related Friction Process Characteristics, INALCO 98 7th International Conference, Joints in Aluminium, Cambridge, UK, 1998
W.M. Thomas, E.D. Nicholas, E.R. Watts, and D.G. Staines, Friction Based Welding Technology for Aluminium, The 8th International Conference on Aluminium Alloys, 2-5 July 2002, Cambridge, UK, 2002
Kawasaki Heavy Industries, Ltd., A New Method for Light Alloy Joining—Friction Spot Joining, 2006-2014. www.kawasakirobot.com
G. Kohn, Y. Greenberg, I. Makover, and A. Munitz, Laser-assisted Friction Stirwelding, Weld. J., 2002, 81, p 46–48
K.N. Krishnan, On the Formation of Onion Rings in Friction Stir Welds, Mater. Sci. Eng. A, 2002, 327, p 246–251
G. Buffa, L. Donati, L. Fratini, and L. Tomesani, Solid State Bonding in Extrusion and FSW: Process Mechanics and Analogies, J. Mater. Process. Technol., 2006, 177, p 344–347
G.M.D. Cantin, S.A. David, W.M. Thomas, E. Lara-Curzio, and S.S. Babu, Friction Skew-Stir Welding of lap Joints in 5083-O Aluminum, Sci. Technol. Weld. Join., 2005, 10, p 268–280
W.M. Thomas, K.I. Johnson, and C.S. Wiesner, Friction Stir Welding—Recent Developments in Tool and Process Technologies, Adv. Eng. Mater., 2003, 5, p 485–490
R. Rai, A. De, H.K.D.H. Bhadeshia, and T. DebRoy, Review: Friction Stir Welding Tools, Sci. Technol. Weld. Join., 2011, 16, p 325–342
J. Defalco, Friction Stir Welding vs. Fusion Welding, Weld. J., 2006, 85, p 42–44
J.W. Arbegast, Friction Stir Welding, Weld. J., 2006, 85, p 28–35
R.S. Mishra and M.W. Mahoney, Eds., Friction Stir Welding and Processing, ASM International, Materials Park, Ohio, USA, 2007
G. Çam, Friction Stir Welded Structural Materials Beyond Al-alloys, Int. Mater. Rev., 2011, 56, p 1–48
E. Dalder, J.W. Pastrnak, J. Engel, R.S. Forrest, E. Kokko, K. McTernan, and D. Waldron, Bobbin-Tool Friction—Stir Welding of Thick-Walled Aluminum Alloy Pressure Vessels, Weld. J., 2008, 87, p 40–44
J. Yan, M.A. Sutton, and A.P. Reynolds, Process-Structure-Property Relationships for Nugget and HAZ Regions of AA2524-T351 Friction Stir Welds, Sci. Technol. Weld. Join., 2005, 10, p 725–736
R. Crawford, G.E. Cook, A.M. Strauss, D.A. Hartman, and M.A. Stremler, Experimental Defect Analysis and Force Prediction Simulation of High Weld Pitch Friction Stir Welding, Sci. Technol. Weld. Join., 2006, 11, p 657–665
Y.G. Kim, H. Fujii, T. Tsumura, T. Komazaki, and K. Nakata, Three Defect Types in Friction Stir Welding of Aluminum die Casting Alloy, Mater. Sci. Eng. A, 2006, 415, p 250–254
H.J. Liu, H. Fujii, M. Maeda, and K. Nogi, Tensile Properties and Fracture Locations of Friction-Stir Welded Joints of 6061-T6 Aluminium Alloy, J. Mater. Sci. Technol., 2004, 20, p 103–105
X. Long and S.K. Khanna, Modelling of Electrically Enhanced Friction Stir Welding Process Using Finite Element Method, Sci. Technol. Weld. Join., 2005, 10, p 482–487
R. Leal and A. Loureiro, Defects Formation in Friction Stir Welding of Aluminium, Mater. Sci Forum, 2004, 455-456, p 299–302
K. Elangovan and V. Balasubramanian, Influences of Pin Profile and Rotational Speed of the Tool on the Formation of Friction Stir Processing Zone in AA2219 Aluminium Alloy, Mater. Sci. Eng. A, 2007, 459, p 7–18
Dong et al., Characteristics and mechanism on the distortion of friction stir welded aluminium alloy sheet. Proc. of the 1st Int. Symp. on Friction Stir Welding, 14-16 June 1999, Thousand Oaks, CA, USA, 1999
G. Liu, L.E. Murr, C.-S. Niou, J.C. McClure, and F.R. Vega, Microstructural Aspects of the Friction-Stir Welding of 6061-T6 Aluminum, Scripta Mater., 1997, 37, p 355–361
S. Benavides, Y. Li, L.E. Murr, D. Brown, and J.C. McClure, Low Temperature Friction Stir Welding of 2024 Aluminum, Scripta Mater., 1999, 41, p 809–815
Z.Y. Ma, R.S. Mishra, and M.W. Mahoney, Superplastic Deformation Behaviour of Friction Stir Processed 7075Al Alloy, Acta Mater., 2002, 50, p 4419–4430
S.A. Khodir, T. Shibayanagi, and M. Naka, Microstructure and Mechanical Properties of Friction Stir Welded AA2024-T3 Aluminum Alloy, Mater. Trans., 2006, 47, p 185–193
S.R. Ren, Z.Y. Ma, and L.Q. Chen, Effect of Welding Parameters on Tensile Properties and Fracture Behavior of Friction Stir Welded Al-Mg-Si Alloy, Scripta Mater., 2007, 56, p 69–72
Y.J. Kwon, N. Saito, and I. Shigematsu, Friction Stir Process as a New Manufacturing Technique of Ultrafine-Grained Aluminum Alloy, J. Mater. Sci. Lett., 2002, 21, p 1473–1476
Y.S. Sato, M. Urata, and H. Kokowa, Parameters Controlling Microstructure and Hardness During Friction-Stir Welding of Precipitation-Hardenable Aluminium Alloy 6063, Metall. Mater. Trans. A, 2002, 33, p 625–635
Y.J. Kwon, I. Shigematsu, and N. Saito, Production of Ultra-Fine Grained Aluminum Alloy Using Friction Stir Process, Mater. Trans., 2003, 44, p 1343–1350
Y.J. Kwon, I. Shigematsu, and N. Saito, Mechanical Properties of Fine-Grained Aluminum Alloy Produced by Friction Stir Process, Scripta Mater., 2003, 49, p 785–789
J.Q. Su, T.W. Nelson, and C.J. Sterling, Microstructure Evolution During FSW/FSP of High Strength Aluminum Alloys, Mater. Sci. Eng. A, 2005, 405, p 277–286
W. Tang, X. Guo, J.C. McClure, and L.E. Murr, Heat İnput and Temperature Distribution in Friction Stir Welding, J. Mater. Process. Manuf. Sci., 1998, 7, p 163–172
A.P. Reynolds, Visualisation of Material Flow in Autogenous Friction Stirwelds, Sci. Technol. Weld. Join., 2000, 5, p 120–124
B. Heinz and B. Skrotzki, Characterization of a Friction Stir Welded Aluminum Alloy 6013, Metall. Mater. Trans. B, 2002, 33, p 489–498
G.S. Frankel and Z. Xia, Localized Corrosion and Stress Corrosion Cracking Resistance of Friction Stir Welded Aluminum Alloy 5454, Corrosion, 1999, 55, p 139–150
Y.S. Sato, H. Kokowa, K. Ikeda, M. Enomoto, S. Jogan, and T. Hashimoto, Microtexture in the Friction-Stir Weld of an Aluminum Alloy, Metall. Mater. Trans. A, 2001, 32, p 941–948
H.G. Salem, A.P. Reynolds, and J.S. Lyons, Microstructure and Retention of Superplasticity of Friction Stir Welded Superplastic 2095 Sheet, Scripta Mater., 2002, 46, p 337–342
L. Litynska, R. Braun, G. Staniek, C. Dalle Donne, and J. Dutkiewicz, TEM Study of Themicrostructure Evolution in a Friction Stir-Welded Al Cu Mg Ag alloy, Mater. Chem. Phys, 2003, 81, p 293–295
A.F. Norman, I. Brough, and P.B. Prangnell, High Resolution EBSD Analysis of the Grain Structure in a AA2024 Friction Stir Weld, Mater. Sci. Forum, 2000, 331-337, p 1713–1718
K.A.A. Hassan, A.F. Norman, D.A. Price, and P.B. Prangnell, Stability of Nugget Zone Grain Structures in High Strength Al Alloy Friction Stir Welds During Solution Treatment, Acta Mater., 2003, 51, p 1923–1936
J.Q. Su, T.W. Nelson, R.S. Mishra, and M.W. Mahoney, Microstructural İnvestigation of Friction Stir Welded 7050-T651 Aluminum, Acta Mater., 2003, 51, p 713–729
Z.Y. Ma, R.S. Mishra, M.W. Mahoney, and R. Grimes, High Strain Rate Superplasticity in Friction Stir Processed Al-Mg-Zr Alloy, Mater. Sci. Eng. A, 2003, 351, p 148–153
I. Charit and R.S. Mishra, High Strain Rate Superplasticity in a Commercial 2024 Al Alloy via Friction Stir Processing, Mater. Sci. Eng. A, 2003, 359, p 290–296
I. Charit, R.S. Mishra, and M.W. Mahoney, Multi-sheet Structures in 7475 Aluminum by Friction Stir Welding in Concert With Post-weld Superplastic Forming, Scripta Mater., 2002, 47, p 631–636
K.V. Jata, K.K. Sankaran, and J.J. Ruschau, Friction Stir Welding Effects on Microstructure and Fatigue of Aluminum Alloy 7075-T7451, Metall. Mater. Trans. A, 2000, 31, p 2181–2192
C.G. Rhodes, M.W. Mahoney, W.H. Bingel, and M. Calabrese, Fine-grain Evolution in Friction Stir Processed 7075 Aluminum, Scripta Mater., 2003, 48, p 1451–1455
K. Oh-Ishi and T.R. McNelley, Microstructural Modification of As-cast NiAl Bronze by Friction Stir Processing, Metall. Mater. Trans. A, 2004, 35, p 2951–2961
R.W. Fonda, J.F. Bingert, and K.J. Colligan, Development of Grain Structure During Friction Stir Welding, Scripta Mater., 2004, 51, p 243–248
T.R. McNelley, S. Swaminathan, and J.Q. Su, Recrystallization Mechanisms During Friction Stir Welding/Processing of Aluminum Alloys, Scripta Mater., 2008, 58, p 349–354
Z.Y. Ma, S.R. Sharma, and R.S. Mishra, Effect of Friction Stir Processing on the Microstructure of Cast A356 Aluminum, Mater. Sci. Eng. A, 2006, 433, p 269–278
K. Kumar and S.V. Kailas, The Role of Friction Stir Welding and Material Flow and Weld Formation, Mater. Sci. Eng. A, 2008, 485, p 367–374
H. Jin, S. Saimoto, M. Ball, and P.L. Threadgill, Characterisation of Microstructure and Texture in Friction Stir Welded Joints of 5754 and 5182 Aluminium Alloy Sheets, Mater. Sci. Technol., 2001, 17, p 1605–1614
D.P. Field, T.W. Nelson, Y. Hovanski, and K.V. Jata, Heterogeneity of Crystallographic Texture in Friction Stir Welds of Aluminum, Metall. Mater. Trans. A, 2001, 32, p 2869–2877
H.N.B. Schmidt, T.L. Dickerson, and J.H. Hattel, Material Flow in Butt Friction Stir Welds in AA2024-T3, Acta Mater., 2006, 54(4), p 1199–1209
R.S. Mishra and M.W. Mahoney, Friction Stir Processing: A new Grain Refinement Technique to Achieve High Strain Rate Superplasticity in Commercial Alloys, Mat. Sci. Forum, 2001, 357, p 507–514
M.R. Barnett and F. Montheillet, The Generation of new High-Angle Boundaries in aluminum During Hot Torsion, Acta Mater., 2002, 50, p 2285–2296
P.A. Colegrove and H.R. Shercliff, Experimental and Numerical Analysis of Aluminum Alloy 7075-T7351 Friction Stir Welds, Sci. Technol. Weld. Join., 2003, 8, p 360–368
H.J. Liu, H. Fujii, and K. Nogi, Microstructure and Mechanical Properties of Friction Stir Welded Joints of AC4A Cast Aluminium Alloy, Mater. Sci. Techol., 2004, 20, p 399–402
H. Fujii, Y.G. Kim, T. Tsumura, T. Komazaki, and K. Nakata, Estimation of Material Flow in Stir Zone During Friction Stir Welding by Distribution Measurement of Si Particles, Mater. Trans., 2006, 47, p 224–232
H. Fujii, L. Cui, M. Maeda, and K. Nogi, Effect of Tool Shape on Mechanical Properties and Microstructure of Friction Stir Welded Aluminium Alloys, Mater. Sci. Eng. A, 2006, 419, p 25–31
H.J. Liu, H. Fujii, M. Maeda, and K. Nogi, Tensile Properties and Fracture Locations of Friction-Stir-Welded Joints of 2017-T351 Aluminum Alloy, J. Mater. Process. Technol., 2003, 142, p 692–696
Y.S. Sato, Y. Kurihara, S.H.C. Park, H. Kokowa, and N. Tsuji, Friction Stir Welding of Ultrafine Grained Al Alloy 1100 Produced by Accumulative Roll-Bonding, Scripta Mater., 2004, 50, p 57–60
L.E. Murr, G. Liu, and J.C. McClure, Dynamic Recrystallization in Friction-Stir Welding of Aluminum Alloy 1100, J. Mater. Sci. Lett., 1997, 16, p 1801–1803
Y.S. Sato, M. Urata, H. Kokowa, K. Ikeda, and M. Enomoto, Retention of Fine Grained Microstructure of Equal Channel Angular Pressed Al Alloy 1050 by Friction Stir Welding, Scripta Mater., 1050, 45(2001), p 109–114
M. Peel, A. Steuwer, M. Preuss, and P.J. Withers, Microstructure, Mechanical Properties and Residual Stresses as a Function of Welding Speed in Aluminium AA5083 Friction Stir Welds, Acta Mater., 2003, 51, p 4791–4801
C. Genevois, A. Deschamps, and P. Vacher, Comparative Study on Local and Global Mechanical Properties of 2024 T351, 2024 T6 and 5251 O Friction Stir Welds, Mater. Sci. Eng. A, 2006, 415, p 162–170
Y.S. Sato, M. Urata, H. Kokowa, and K. Ikeda, Hall-Petch Relationship in Friction Stir Welds of Equal Channel Angular Pressed Aluminium Alloys, Mater. Sci. Eng. A, 2003, 354, p 298–305
T. Hirata, T. Oguri, H. Hagino, T. Tanaka, S.W. Chung, Y. Takigawa, and K. Higashi, Influence Offriction Stir Welding Parameters on Grain Size and Formability in 5083 Aluminum Alloy, Mater. Sci. Eng. A, 2007, 456, p 344–349
A.L. Etter, T. Baudin, N. Fredj, and R. Penelle, Recrystallization Mechanisms in 5251 H14 and 5251 O Aluminum Friction Stir Welds, Mater. Sci. Eng. A, 2007, 445-446, p 94–99
G. Çam, S. Güçlüer, A. Çakan, and H.T. Serindağ, Mechanical Properties of Friction Stir Butt-Welded Al-5086 H32 Plate, Mat.-wiss. u. Werkstofftech., 2009, 40, p 638–642
A. von Strombeck, J.F. dos Santos, F. Torster, P. Laureano, and M. Koçak, Fracture Toughness Behavior of FSW Joints on Aluminum Alloys, Proc. 1st Int. Symp. on Friction Stir Welding, Thousand Oaks, CA, USA, June 14-16, 1999
A. Denquin, D. Allehaux, M.H. Campagnac, and G. Lapasset, Microstructural and Mechanical Evolutions Within Friction Stir Welds of Precipitation Hardened Aluminium Alloys, Mater. Sci. Forum, 2003, 426-432, p 2921–2926
C. Leitao, R.M. Leal, D.M. Rodrigues, A. Loureiro, and P. Vilaça, Mechanical Behaviour of Similar and Dissimilar AA 5182-H111and AA 6016-T4 Thin Friction Stir Welds, Mater. Des., 2009, 30, p 101–108
W.M. Thomas, P.L. Threadgill, and E.D. Nicholas, Feasibility of Friction Stir Welding Steel, Sci. Technol. Weld. Join., 1999, 4, p 365–372
T.J. Lienert, W.L. Stellwag, B.B. Grimmett, and R.W. Warke, Friction Stir Welding Studies on Mild Steel—Process Results, Microstructures, and Mechanical Properties are Reported, Weld. J., 2003, 82, p 1s–9s
A.P. Reynolds, W. Tang, M. Posada, and J. DeLoach, Friction Stir Welding of DH36 Steel, Sci. Technol. Weld. Join., 2003, 8, p 455–460
P.J. Konkol, C.J.A. Mathers, R. Johnson, and J.R. Pickens, Friction Stir Welding of HSLA-65 Steel for Ship Building, J. Ship Prod., 2003, 19, p 159–164
A. Ozekcin, H.W. Jin, J.Y. Koo, N.V. Bangaru, R. Ayer, G. Vaughn, R. Steel, and S. Packer, A Microstructural Study of Friction Stir Welded Joints of Carbon Steels, Int. J. Offshore Polar Eng., 2004, 14, p 284–288
R. Ueji, H. Fujii, L. Cui, A. Nishioka, K. Kunishige, and K. Nogi, Friction Stir Welding of Ultrafine Grained Plain Low-Carbon Steel Formed by the Martensite Process, Mater. Sci. Eng. A, 2006, 423, p 324–330
H. Fujii, R. Ueji, Y. Takada, H. Kitahara, N. Tsuji, K. Nakata, and K. Nogi, Friction Stir Welding of Ultrafine Grained İnterstitial Free Steels, Mater. Trans., 2006, 47, p 239–242
H. Fujii, L. Cui, N. Tsuji, M. Maeda, K. Nakata, and K. Nogi, Friction Stir Welding of Carbon Steel, Mater. Sci. Eng. A, 2006, 429, p 50–57
L. Cui, H. Fujii, N. Tsuji, and K. Nogi, Friction Stir Welding of a High Carbon Steel, Scripta Mater., 2007, 56, p 637–640
H.S. Park, T. Kimura, T. Murakami, Y. Nagano, K. Nakata, and M. Ushio, Microstructure and Mechanical Properties of Friction Stir Welds of 60% Cu-40% Zn Copper Alloy, Mater. Sci. Eng. A, 2004, 371, p 160–169
G. Çam, H.T. Serindag, A. Çakan, S. Mistikoglu, and H. Yavuz, The Effect of Weld Parameters on Friction Stir Welding of Brass Plates, Mat.-wiss. u. Werkstofftech., 2008, 39, p 394–399
G. Çam, S. Mistikoglu, and M. Pakdil, Microstructural and Mechanical Characterization of Friction Stir Butt Joint Welded 63%Cu-37%Zn Brass Plate, Weld. J., 2009, 88, p 225s–232s
W.B. Lee and S.B. Jung, The Joint Properties of Copper by Friction Stir Welding, Mater. Lett., 2004, 58, p 1041–1046
G. Çam and M. Koçak, Progress in Joining of Advanced Materials—Part II: Joining of Metal Matrix Composites and Joining of Other Advanced Materials, Sci. Technol. Weld. Join., 1998, 3, p 159–175
ASM International, Welding, Brazing and Soldering, ASM Handbook, D.L. Olson et al., Ed., ASM International, Materials Park, 1993,
A.P. Reynolds, Mechanical and Corrosion Performance of TGA and Friction Stir Welded Aluminum for Tailor Welded Blanks: Alloys 5454 and 6061, Proc. 5th Int. Conf. on Trends in Welding Research, J.M. Vitek et al., Eds., 1-5 June, 1998 (Pine Mountain, GA), ASM International, Materials Park, OH, 1999, p 563-567
Y.S. Sato, S.H.C. Park, and H. Kokowa, Microstructural Factors Governing Hardness in Friction-Stir Welds of Solid-Solution-Hardened Al Alloy, Metall. Mater. Trans. A, 2001, 32, p 3033–3042
M. Kumagai and S. Tanaka, Application of Friction Stir Welding to Welded Construction of Aluminum Alloys, J. Light Met. Weld. Constr., 2001, 39, p 22–28
L.-E. Svensson, L. Karlsson, H. Larsson, B. Karlsson, M. Fazzini, and J. Karlsson, Microstructure and Mechanical Properties of Friction Stir Welded Aluminium Alloys with Special Reference to AA 5083 and AA 6082, Sci. Technol. Weld. Join., 2000, 5, p 285–296
M. Simoncini and A. Forcellese, Effect of the Welding Parameters and Tool Configuration on Micro- and Macro-mechanical Properties of Similar and Dissimilar FSWed Joints in AA5754 and AZ31 Thin Sheets, Mater. Des., 2012, 41, p 50–60
P.B. Dickerson and B. Irving, Welding Aluminium: It’s not as Difficult as it Sounds, Weld. J., 1992, 71, p 45–50
S. Kou, Welding Metallurgy, Wiley, New York, 1987, p 239
R.J. Brungraber and F.G. Nelson, Effect of Welding Variables on Aluminum Alloy Weldments, Weld. J., 1973, 52, p 97s–103s
G. Çam, V. Ventzke, J.F. dos Santos, M. Koçak, G. Jennequin, and P. Gonthier-Maurin, Characterisation of Electron Beam Welded Aluminium Alloys, Sci. Technol. Weld. Join., 1999, 4, p 317–323
G. Çam, V. Ventzke, J.F. dos Santos, M. Koçak, G. Jennequin, P. Gonthier-Maurin, M. Penasa, and C. Rivezla, Characterization of Laser and Electron Beam Welded Al Alloys, Pract. Metallogr., 2000, 37, p 59–89
G. Çam and M. Koçak, Microstructural and Mechanical Characterization of Electron Beam Welded Al-alloy 7020, J. Mater. Sci., 2007, 42, p 7154–7161
W. Woo, H. Choo, D.W. Brown, and Z. Feng, Influence of the Tool pin and Shoulder on Microstructure and Natural Aging Kinetics in a Friction-Stir-Processed 6061-T6 Aluminum Alloy, Metall. Mater. Trans. A, 2007, 38, p 69–76
C. Dalle Donne, R. Braun, G. Staniek, A. Jung, and W.A. Kaysser, Mikrostrukturelle, mechanische und korrosive Eigenschaften reibrührgeschweißter Stumpfnähte an Aluminiumlegierungen, Matt.-wiss u Werkstofftech., 1998, 29, p 609–617
Y.H. Zhao, S.B. Lin, L. Wu, and F.X. Qu, The İnfluence of pin Geometry on Bonding and Mechanical Properties in Friction Stir Weld 2014 Al Alloy, Mater. Lett., 2014, 59(2005), p 2948–2952
T.S. Srivatsan, S. Vasudevan, and L. Park, The Tensile Deformation and Fracture Behavior of friction Stir Welded Aluminum Alloy 2024, Mater. Sci. Eng. A, 2007, 466, p 235–245
Y. Chen, H. Liu, and J. Feng, Friction Stir Welding Characteristics of Different Heat-treated-state 2219 Aluminum Alloy Plates, Mater. Sci. Eng. A, 2006, 420, p 21–25
Z. Zhang, B.L. Xiao, and Z.Y. Ma, Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded 2219Al-T6 Joints, J. Mater. Sci., 2012, 47, p 4075–4086
A. Scialpi, L.A.C. De Filippis, and P. Cavaliere, Influence of Shoulder Geometry on Microstructure and Mechanical Properties of Friction Stir Welded 6082 Aluminium Alloy, Mater. Des., 2007, 28, p 1124–1129
A.M. Gaafer, T.S. Mahmoud, and E.H. Mansour, Microstructural and Mechanical Characteristics of AA7020-O Al Plates Joined by Friction Stir Welding, Mater. Sci. Eng. A, 2010, A527, p 7424–7429
C. Sharma, D.K. Dwivedi, and P. Kumar, Effect of Welding Parameters on Microstructure and Mechanical Properties of Friction Stir Welded Joints of AA7039 Aluminum Alloy, Mater. Des., 2012, 36, p 379–390
Y. Motohashi, T. Sakuma, A. Goloborodko, T. Ito, and G. Itoh, Grain Refinement Process in Commercial 7075-T6 Aluminum Alloy Under Friction Stir Welding and Superplasticity, Matt.-wiss u Werkstofftech., 2008, 39, p 275–278
P. Cavalier, G. Campanile, F. Panella, and A. Squillace, Effect of Welding Parameters on Mechanical and Microstructure Properties of AA6056 Joints Produced by Friction Stir Welding, J. Mater. Processing Technol., 2006, 180, p 263–270
M. Cabibbo, H.J. McQueen, E. Evangelista, S. Spigarelli, M. di Paola, and A. Falchero, Microstructure and Mechanical Property Studies of AA6056 Friction Stir Welded Plate, Mater. Sci. Eng. A, 2007, 460-461, p 86–94
P.M.G.P. Moreira, T. Santos, S.M.O. Tavares, V. Richter-Trummer, P. Vilaça, and P.M.S.T. de Castro, Mechanical and Metallurgical Characterization of Friction Stir Welding Joints of AA6061-T6 with AA6082-T6, Mater. Des., 2009, 30, p 180–187
A. Scialpi, L.A.C. de Filippis, and P. Cavalier, Influence of Shoulder Geometry on Microstructure and Mechanical Properties of Friction Stir Welded 6082 Aluminium Alloy, Mater. Des., 2007, 28, p 1124–1129
P. Cavalier, A. Squillace, and F. Panella, Effect of Welding Parameters on Mechanical and Microstructural Properties of AA6082 Joints Produced by Friction Stir Welding, J. Mater. Process. Technol., 2008, 200, p 364–372
P.S. Pao, S.J. Gill, C.R. Feng, and K.K. Sankaran, Corrosion-Fatigue Crack Growth in Friction Stir Welded Al 7050, Scripta Mater., 2001, 45, p 605–612
S. Sheikhi and J.F. dos Santos, Effect of Process Parameter on Mechanical Properties of Friction Stir Welded Tailored Blanks from Aluminium Alloy 6181-T4, Sci. Technol. Weld. Join., 2007, 12, p 370–375
W. Xu, J. Liu, G. Luan, and C. Dong, Microstructure and Mechanical Properties of Friction Stir Welded Joints in 2219-T6 Aluminium Alloy, Mater. Des., 2009, 30, p 3460–3467
G. D’Urso, E. Ceretti, C. Giardini, and G. Maccarini, The Effect of Process Parameters and Tool Geometry on Mechanical Properties of Friction Stir Welded Aluminum Butt Joints, Int. J. Mater. Forming, 2009, 2, p 303–306
G. İpekoğlu, S. Erim, B. Gören Kıral, and G. Çam, Investigation into the Effect of Temper Condition on Friction Stir Weldability of AA6061 Al-alloy Plates, Kovove Mater., 2013, 51, p 155–163
G. İpekoğlu, S. Erim, and G. Çam, Investigation into the Influence of Post-weld Heat Treatment on the Friction Stir Welded AA6061 Al-alloy Plates with Different Temper Conditions, Metall. Mater. Trans. A, 2014, 45A, p 864–877
K. Kumar and S.V. Kailas, On the Role of Axial Load and the Effect of İnterface Position on the Tensile Strength of a Friction Stir Welded Aluminium Alloy, Mater. Des., 2008, 29, p 791–797
G. İpekoğlu, B. Gören Kıral, S. Erim, and G. Çam, Investigation of the Effect of Temper Condition on Friction Stir Weldability of AA7075 Al-alloy Plates, Mater. Technol., 2012, 46, p 627–632
G. İpekoğlu, S. Erim, and G. Çam, Effects of Temper Condition and Post Weld Heat Treatment on the Microstructure and Mechanical Properties of Friction Stir Butt Welded AA7075 Al-Alloy Plates, Int. J. Adv. Manuf. Technol., 2014, 70, p 201–203
S. Rajakumar, C. Muralidharan, and V. Balasubramanian, Influence of Friction Stir Welding Process and Tool Parameters on Strength Properties of AA7075-T6 Aluminium Alloy Joints, Mater. Des., 2011, 32, p 535–549
C.S. Paglia and R.G. Buchheit, Microstructure, Microchemistry and Environmental Cracking Susceptibility of Friction Stir Welded 2219-T87, Mater. Sci. Eng. A, 2006, 429, p 107–114
M. Pakdil, G. Çam, M. Kocak, and S. Erim, Microstructural and Mechanical Characterization of Laser Beam Welded AA6056 Al-alloy, Mater. Sci. Eng. A, 2011, 528, p 7350–7356
Y. Bozkurt, S. Salman, and G. Çam, The effect of Welding Parameters on Lap-Shear Tensile Properties of Dissimilar Friction Stir Spot Welded AA5754-H22/2024-T3 Joints, Sci. Technol. Weld. Join., 2013, 18, p 337–345
G. İpekoğlu and G. Çam, Effects of İnitial Temper Condition and Post Weld Heat Treatment on the Properties of Dissimilar Friction Stir Welded Joints Between AA 7075 and AA 6061 Aluminium Alloys, Metall. Mater. Trans. A, 2014, doi: 10.1007/s11661-014-2248-7
M.A. Safarkhanian, M. Goodarzi, and S.M.A. Boutorabi, Effect of Abnormal Grain Growth on Tensile Strength of Al-Cu-Mg Alloy Friction Stir Welded Joints, J. Mater. Sci., 2009, 44, p 5452–5458
R.K.R. Singh, C. Sharma, D.K. Dwivedi, N.K. Mehta, and P. Kumar, The Microstructure and Mechanical Properties of Friction Stir Welded Al-Zn-Mg Alloy in as Welded and Heat Treated Conditions, Mater. Des., 2011, 32, p 682–687
H. Aydın, A. Bayram, and I. Durgun, The Effect of Post-weld Heat Treatment on the Mechanical Properties of 2024-T4 Friction Stir-Welded Joints, Mater. Des., 2010, 31, p 2568–2577
C. Sharma, D.K. Dwivedi, and P. Kumar, Effect of Post Weld Heat Treatments on Microstructure and Mechanical Properties of Friction Stir Welded Joints of Al-Zn-Mg Alloy AA7039, Mater. Des., 2013, 43, p 134–143
H.J. Liu, J.C. Hou, and H. Guo, Effect of Welding Speed on Microstructure and Mechanical Properties of Self-Reacting Friction Stir Welded 6061-T6 Aluminum Alloy, Mater. Des., 2013, 50, p 872–878
L. Wan, Y. Huang, Z. Lv, S. Lv, and J. Feng, Effect of Self-Support Friction Stir Welding on Microstructure and Microhardness of 6082-T6 Aluminum Alloy Joint, Mater. Des., 2014, 55, p 197–203