Realizing over 10% efficiency in polymer solar cell by device optimization
Tóm tắt
Từ khóa
Tài liệu tham khảo
Chen JW, Cao Y. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices. Acc Chem Res, 2009, 42: 1709–1718
Li YF. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. Acc Chem Res, 2012, 45: 723–733
Duan CH, Huang F, Cao Y. Recent development of push-pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures. J Mater Chem, 2012, 22: 10416–10434
Li ZG, Zhao XY, Li X, Gao ZQ, Mi BX, Huang W. Organic thin-film solar cells: devices and materials. Sci China Chem, 2012, 55: 553–578
Chen CC, Chang WH, Yoshimura K, Ohya K, You J, Gao J, Hong Z, Yang Y. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%. Adv Mater, 2014, 26: 5670–5677
He ZC, Wu HB, Cao Y. Recent advances in polymer solar cells: realization of high device performance by incorporating water/alcohol-soluble conjugated polymers as electrode buffer layer. Adv Mater, 2014, 26: 1006–1024
Li WW, Furlan A, Hendriks KH, Wienk MM, Janssen RAJ. Efficient tandem and triplejunction polymer solar cells. J Am Chem Soc, 2013, 135: 5529–5532
Yang TB, Wang M, Duan CH, Hu XW, Huang L, Peng JB, Huang F, Gong X. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte. Energy Environ Sci, 2012, 5: 8208–8214
Ye L, Zhang SQ, Huo LJ, Zhang MJ, Hou JH. Molecular Design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene. Acc Chem Res, 2014, 47: 1595–1603
Huo LJ, Hou JH. Benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymers: band gap and energy level control and their application in polymer solar cells. Polym Chem, 2011, 2: 2453–2461
Wang M, Hu XW, Liu P, Li W, Gong X, Huang F, Cao Y. Donor acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5] thiadiazole for high-performance polymer solar cells. J Am Chem Soc, 2011, 133: 9638–9641
Wang Y, Liu Y, Chen S, Peng R, Ge ZY. Significant enhancement of polymer solar cell performance via side-chain engineering and simple solvent treatment. Chem Mater, 2013, 25: 3196–3204
Warnan J, El Labban A, Cabanetos C, Hoke ET, Shukla PK, Risko C, Brédas J-L, McGehee MD, Beaujuge PM. Ring substituents mediate the morphology of PBDTTPD-PCBM bulk-heterojunction solar cells. Chem Mater 2014, 26: 2299–2306
Deng Y, Liu J, Wang J, Liu L, Li W, Tian H, Zhang X, Xie ZY, Geng YH, Wang FS. Dithienocarbazole and isoindigo based amorphous low bandgap conjugated polymers for efficient polymer solar cells. Adv Mater, 2014, 26: 471–476
Chen HY, Hou JH, Zhang SQ, Liang YY, Yang GW, Yang Y, Yu LP, Wu Y, Li G. Polymer solar cells with enhanced open-circuit voltage and efficiency. Nature Photonics, 2009, 3: 649–653
Hou JH, Chen HY, Zhang SQ, Chen RI, Yang Y, Wu Y, Li G. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells. J Am Chem Soc, 2009, 131: 15586–15587
Liang YY, Xu Z, Xia JB, Tsai ST, Wu Y, Li G, Ray C, Yu LP. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%. Adv Mater, 2010, 22: E135–E138
Huo LJ, Zhang SQ, Guo X, Xu F, Li YF, Hou JH. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers. Angew Chem Int Ed, 2011, 50: 9697–9702
Guo X, Zhang MJ, Ma W, Ye L, Zhang SQ, Liu SJ, Ade H, Huang F, Hou JH. Enhanced photovoltaic performance by modulating surface composition in bulk heterojunction polymer solar cells based on PBDTTT-C-T/PC71BM. Adv Mater, 2014, 26: 4043–4049
Huang Y, Guo X, Liu F, Huo LJ, Chen YN, Russell TP, Han CC, Li YF, Hou JH. Improving the ordering and photovoltaic properties by extending pi-conjugated area of electron-donating units in polymers with D-A structure. Adv Mater, 2012, 24: 3383–3389
Zhang MJ, Guo X, Zhang SQ, Hou JH. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers. Adv Mater, 2014, 26: 1118–1123
Kim JH, Song CE, Kim B, Kang IN, Shin WS, Hwang DH. Thieno[3,2-b] thiophene-substituted benzo[1,2-b:4,5-b′]dithiophene as a promising building block for low bandgap semiconducting polymers for highperformance single and tandem organic photovoltaic cells. Chem Mater, 2013, 26: 1234–1242
Cui CH, Wong WY, Li YF. Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution. Energy Environ Sci, 2014, 7: 2276–2284
Liu P, Zhang K, Liu F, Jin Y, Liu SJ, Russell TP, Yip HL, Huang F, Cao Y. Effect of fluorine content in thienothiophene-benzodithiophene copolymers on the morphology and performance of polymer solar cells. Chem Mater, 2014, 26: 3009–3017
Zhang SQ, Ye L, Zhao WC, Liu D, Yao HF, Hou JH. Side chain selection for designing highly efficient photovoltaic polymers with 2D-conjugated structure. Macromolecules, 2014, 47: 4653–4659
Ye L, Zhang SQ, Zhao WC, Yao H, Hou JH. Highly efficient 2D-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain. Chem Mater, 2014, 26: 3603–3605
He ZC, Zhong CM, Su SJ, Xu M, Wu HB, Cao Y. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure. Nat Photonics, 2012, 6: 591–595
Liao SH, Jhuo HJ, Cheng YS, Chen SA. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance. Adv Mater, 2013, 25: 4766–4771
Liu SJ, Zhang K, Lu J, Zhang J, Yip HL, Huang F, Cao Y. High-efficiency polymer solar cells via the incorporation of an amino-functionalized conjugated metallopolymer as a cathode interlayer. J Am Chem Soc, 2013, 135: 15326–15329
Li CZ, Chang CY, Zang Y, Ju HX, Chueh CC, Liang PW, Cho N, Ginger DS, Jen AKY. Suppressed charge eecombination in inverted organic photovoltaics via enhanced charge extraction by using a conductive fullerene electron transport layer. Adv Mater, 2014, DOI: 10.1002/adma.201402276
Tan ZA, Li L, Wang FZ, Xu Q, Li SS, Sun G, Tu X, Hou X, Hou JH, Li YF. Solution-processed rhenium oxide: a versatile anode buffer layer for high performance polymer solar cells with enhanced light harvest. Adv Energy Mater, 2014, 4: 1300884
Tan ZA, Zhang WQ, Zhang ZG, Qian DP, Huang Y, Hou JH, Li YF. High-performance inverted polymer solar cells with solution-processed titanium chelate as electron-collecting layer on ITO electrode. Adv Mater, 2012, 24: 1476–1481
Li XH, Choy WCH, Huo LJ, Xie FX, Sha WEI, Ding BF, Guo X, Li YF, Hou JH, You JB, Yang Y. Dual plasmonic nanostructures for high performance inverted organic solar cells. Adv Mater, 2012, 24: 3046–3052
Ye L, Jing Y, Guo X, Sun H, Zhang S, Zhang MJ, Huo LJ, Hou JH. Remove the residual additives toward enhanced efficiency with higher reproducibility in polymer solar cells. J Phys Chem C, 2013, 117: 14920–14928
Liu F, Gu Y, Shen X, Ferdous S, Wang HW, Russell TP. Characterization of the morphology of solution-processed bulk heterojunction organic photovoltaics. Prog Polym Sci, 2013, 38: 1990–2052
Peet J, Kim JY, Coates NE, Ma WL, Moses D, Heeger AJ, Bazan GC. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. Nat Mater, 2007, 6: 497–500
Lee JK, Ma WL, Brabec CJ, Yuen J, Moon JS, Kim JY, Lee K, Bazan GC, Heeger AJ. Processing additives for improved efficiency from bulk heterojunction solar cells. J Am Chem Soc, 2008, 130: 3619–3623
Ye L, Zhang SQ, Ma W, Fan BH, Guo X, Huang Y, Ade H, Hou JH. From binary to ternary solvent: morphology fine-tuning of D/A blends in PDPP3T-based polymer solar cells. Adv Mater, 2012, 24: 6335–6341