Reaction dynamics of bentonite clay, FeCl3, Al2(SO4)3 and Na2CO3 dosage in AMD using varying dispersion techniques

Aboulhassan, 2006, Removal of surfactant from industrial wastewaters by coagulation flocculation process, Interface J. Environ. Sci. Technol., 3, 327, 10.1007/BF03325941 Aidun, 2010, Lattice-Boltzmann method for complex flows, Annu. Rev. Fluid Mech., 42, 439, 10.1146/annurev-fluid-121108-145519 Bratby, 2006 Barakat, 2011, New trends in removing heavy metals from industrial wastewater, Arab. J. Chem., 4, 361, 10.1016/j.arabjc.2010.07.019 Bolto, 2007, Organic polyelectrolytes in water treatment, Wat. Res., 41, 2301, 10.1016/j.watres.2007.03.012 Chowdhury, 2013, Preparation of carbonaceous adsorbents from lignocellulosic biomass and their use in removal of contaminants from aqueous solution, BioResources, 8, 6523, 10.15376/biores.8.4.6523-6555 De Hoces, 2011, Life cycle assessment on producing a heavy metals biosorbent from sugarcane bagasse, Desalination Water Treatm., 30, 272, 10.5004/dwt.2011.2093 Edwards, 2007, Linking phosphorus sources to impacts in different types of water body, Soil Use Manag., 23, 133, 10.1111/j.1475-2743.2007.00110.x Firer, 2008, Control of sulfide in sewer systems by dosage of iron salts: comparison between theoretical and experimental results, and practical implications, Sci. Total Environ., 392, 145, 10.1016/j.scitotenv.2007.11.008 Flynn, 1984, Hydrolysis of Inorganic Iron(III), J. Am. Chem. Soc., 84, 31 Hubbe, 2011, Cellulosic substrates for removal of pollutants from aqueous systems: a review. 1. metals, BioResources, 6, 2161, 10.15376/biores.6.2.2161-2287 Hubbe, 2013, Cellulosic substrates for removal of pollutants from aqueous systems: a Review. 3. Spilled oil and emulsified organic liquids, BioResources, 8, 3038, 10.15376/biores.8.2.3038-3097 Jiang, 1997 Karnitz, 2010, Removal of Ca(II) and Mg(II) from aqueous single metal solutions by mercerized cellulose and mercerized sugarcane bagasse grafted with EDTA dianhydride (EDTAD), Carbohydr. Polym., 79, 184, 10.1016/j.carbpol.2009.07.048 Kirby, 2010 Likon, 2011, Papermill industrial waste as a sustainable source for high efficiency absorbent production, Waste Manag., 31, 1350, 10.1016/j.wasman.2011.01.012 Lottermoser, 2007 McCarthy, 2011, The impact of acid mine drainage in South Africa, S. Afr. J. Sci., 10.4102/sajs.v107i5/6.712 Ntwampe, 2013, The effect of mixing on the treatment of paint wastewater with Fe3+ and Al3+ salts, J. Environ. Chem. Ecotoxicol., 5, 7 Ntwampe, 2013, The effect of water hardness on paint wastewater treatment by coagulation-flocculation, J. Environ. Chem. Ecotoxicol., 5, 7 Ntwampe, 2015, Reaction dynamics of iron and aluminium salts dosage in AMD using shaking as an alternative technique in the destabilization-hydrolysis process, Int. J. Sci. Res., 4, 5 Pratt, 2007, Effects of redox potential and pH changes on phosphorus retention by melter slag filters treating wastewater, Environ. Sci. Technol., 4, 6583 Reed, 1986 Santos, 2011, Tannery sludge compost amendment rates on soil microbial biomass of two different soils, Eur. J. Soil Biol., 47, 146, 10.1016/j.ejsobi.2011.01.002 Sarti, 2004, Evaluation of a mechanistic mathematical model of a packed-bed anaerobic reactor treating wastewater, Latin Am. App. Res., 34, 127 Sincero, 2003 Scholtz, 2010 Sinha, 2013, Attractive forces between charged colloidal particles induced by multivalent ions revealed by confronting aggregation and direct force measurements, J. Phys. Chem., 4, 648 Swartz, 2004 Tutic, 2015, The heavy metals in agrosystems and impact on health and quality of life, J. Med. Sci., 3, 345 Wall, 2003, Humic acids coagulation: influence of divalent cations, Appl. Geochem., 18, 1573, 10.1016/S0883-2927(03)00046-5 2005, vol. 3 Wang, 2011, Characteristics of physicochemical adsorption of soluble matter by particles formed in a fluidized pellet bed reactor, Environ. Technol., 32, 713, 10.1080/09593330.2010.510849 Wulfsberg, 1987 Xiaochang, 2011, Characteristics physicochemical adsorption of soluble matter by particles formed in a fluidized pellet bed reactor, Environ. Technol., 32, 713, 10.1080/09593330.2010.510849