Rapid vision-based dimensional precision inspection of mesoscale artefacts

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture - Tập 221 Số 4 - Trang 659-672 - 2007
Samir Mekid1, Heeburm Ryu1
1School of Mechanical Aerospace and Civil Engineering, University of Manchester, Manchester, UK

Tóm tắt

This paper describes the investigation and implementation of image processing techniques converted into precision measurement techniques for feature inspection of mesoscale artefacts. The method resulted in a rapid, low-cost, and precise inspection technique. Better performances are obtained with the combination of the pixel uncertainty edge detector and the subpixel uncertainty detector along with camera calibration. This procedure revealed that the subpixel moment-based edge detector presents smooth edge boundaries that are closer to the true contour of the specimen compared to edges detected by Canny edge detector. In addition, it was observed that this smoothness is closely related to the mask size of the moments' calculation. The considered sources of error are the quality of the reference target and the accuracy of the camera calibration. A comparison with the results of the other instruments reveals that the uncertainty of the proposed inspection system could reach more than 5 mm with a much lower resolution and an absolute average difference of about 6 mm between measurements.

Từ khóa


Tài liệu tham khảo

10.1016/S0166-3615(98)00093-1

10.1016/S0263-2241(98)00076-1

10.1016/S0146-664X(77)80024-5

Milan Sonka V. H., 1999, Image processing, analysis, and machine vision, 2

10.1098/rspb.1980.0020

Canny J. Variational approach to edge detection. In Proceedings of the National Conference on Artificial intelligence, AAAI-83, Washington, DC, USA, 1983.

10.1109/TPAMI.1986.4767851

10.1016/0031-3203(93)90038-X

10.1016/j.imavis.2004.07.007

10.1109/TPAMI.1984.4767502

10.1016/0031-3203(83)90063-8

10.1109/34.41367

10.1002/scj.4690220908

10.1016/j.imavis.2004.07.003

Kim T. H., Moon Y. S., Han C. S. An efficient method of estimating edge locations with subpixel accuracy in noisy images, presented at TENCON 99. In Proceedings of the IEEE Region 10 Conference, 1999.

Ohtani K., Baba M. A fast edge location measurement with subpixel accuracy using a CCD image. Presented at the Instrumentation and Measurement Technology Conference, 2001. In Proceedings of the 18th IEEE, IMTC 2001.

10.1016/S0030-3992(03)00069-0

http://www.npl.co.uk/length/dmet/services/ms_visioncmm.html.

10.1088/0957-0233/17/3/S15

10.1016/0031-3203(93)90135-J

10.1109/34.632980

Prewitt J. M. S., 1970, PictureProcessing and psychopictorics, 75

Shen J., 1992, Computer Vision Graphics Image Processing, 54, 112

10.1007/BF00123164

10.1109/34.134047

10.1109/34.103275

10.1201/9781420040760

Milan Sonka V. H., 1999, Image processing, analysis, and machine vision, 2

10.1016/0031-3203(93)90038-X

MathWorks, “MATLAB v.6.5 release 13,” 2002, pp. www.mathworks.com.

10.1109/JRA.1987.1087109

Bouguet J.Y. Camera Calibration Toolbox for Matlab, vol. 2004: http://www.vision.caltech.edu/bouguetj/calibdoc/.

Heikkila J., Silven O. Four-step camera calibration procedure with implicit image correction. In Proceedings of the 1997 IEEE Computer Society Conference on Computer vision and pattern recognition, 17–19. June 1997, San Juan, PR, USA.

10.1006/cviu.1997.0516

BS ISO 230-1. 1996, British Standard: Test code for machine tools: Part 1. Geometric accuracy of machines operating under no-load or finishing conditions.

1995, Guide to the Expression of Uncertainty in Measurement, 2

Thông tin
Thông tin xuất bản

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Tập 221 Số 4

659-672

Thông tin tác giả