Rapid supersonic performance estimation for a novel RBCC engine inlet

Anderson, 1990

2009

Ben-Dor, 1999, The influence of the downstream pressure on the shock wave reflection phenomenon in steady flows, J. Fluid Mech., 386, 213, 10.1017/S0022112099004474

Bevilaqua, 1974, Evaluation of hypermixing for thrust augmenting ejectors, J. Aircr., 11, 348, 10.2514/3.59257

Billig, 1967, Shock-wave shapes around spherical & cylindrical-nosed bodies, J. Spacecr. Rockets, 4, 822, 10.2514/3.28969

M. Bulman, A. Siebenhaar, The strutjet engine: Exploding the myths surrounding high speed airbreathing propulsion, AIAA Paper 95-2475, 1995.

D.J. Cerantola, J. Etele, A nozzle concept to entrain atmospheric air for ejector operation, Presented at the 14th AIAA/AHI Space Planes and Hypersonic Systems and Technologies Conference, 2006, AIAA Paper 2006-8089.

J.M. Cramer, M. Greene, S. Pal, R.J. Santoro, RBCC ejector mode operating characteristics for single and twin thruster configurations, AIAA Paper 2001-3464, 2001.

R. Daines, M. Bulman, Computational analyses of dynamic rocket ejector flowfields, AIAA Paper 96-2686, 1996.

F. Dykstra, A. Maree, M. Caporicci, H. Immich, Experimental investigation of the thrust enhancement potential of ejector rockets, AIAA Paper 97-2756, 1997.

J.D. Escher, R.E. Schnurstein, A retrospective on early cryogenic primary rocket subsystem designs as integrated into rocket-based combined-cycle (RBCC) engines, Presented at the 29th Joint Propulsion Conference, July 1993.

J. Etele, G. Chorkawy, Optimization of a novel RBCC propulsion system by genetic algorithm, in: 27th Congress of the International Council of the Aeronautical Science, France, 2010, ICAS Paper 2010-4.6.2.

Etele, 2012, Exchange inlet design for rocket-based-combined-cycle engines, J. Propuls. Power, 28, 1026, 10.2514/1.B34531

Fancher, 1972, Low-area ratio, thrust-augmenting ejectors, J. Aircr., 9, 243, 10.2514/3.58964

C. Freitas, U. Ghia, I. Celik, P. Roache, P. Raad, ASMEʼs quest to quantify numerical uncertainty, Presented at the 41st Aerospace Sciences Meeting and Exhibit, 2003.

Hirschel, 2005

Presz, 1988, Forced mixer lobes in ejector designs, J. Propuls. Power, 4, 350, 10.2514/3.23073

Quinn, 1973, Compact ejector thrust augmentation, J. Aircr., 10, 481, 10.2514/3.60251

Roache, 1998, Verification of codes and calculations, AIAA J., 36, 696, 10.2514/2.457

A. Siebenhaar, M. Bulman, The strutjet engine: The overlooked option for space launch, AIAA Paper 95-3124, 1995.

A. Siebenhaar, M. Bulman, in: 32nd JANNAF Combustion Subcommittee Meeting and Propulsion Engineering Research Center 7th Annual Symposium, JANNAF, 1996, pp. 271–284.

Tillman, 1992, Supersonic nozzle mixer ejector, J. Propuls. Power, 8, 513, 10.2514/3.23506

T. Waung, J. Etele, An ejector air intake design method for a novel RBCC rocket nozzle, AIAA Paper 2009-5294, 2009.