Quasi-simultaneous 3D printing of muscle-, lung- and bone-equivalent media: a proof-of-concept study

Tino R, Yeo A, Leary M, Brandt M, Kron T (2019) A systematic review on 3D-printed imaging and dosimetry phantoms in radiation therapy. Technol Cancer Res Treat 18:1–14

Crowe S (2019) Personalized phantoms through 3D printing. Radiother Oncol 133(S1):s362

Tran-Gia J, Schlogl S, Lassmann M (2016) Design and fabrication of kidney phantoms for internal radiation dosimetry using 3D printing technology. J Nucl Med 57(12):1998–2005

Kairn T, Crowe SB, Markwell T (2015) Use of 3D printed materials as tissue equivalent phantoms. IFMBE Proc 51:728–731

Dancewicz OL, Sylvander SR, Markwell TS, Crowe SB, Trapp JV (2017) Radiological properties of 3D printed materials in kilovoltage and megavoltage photon beams. Phys Med 38:111–118

Kairn T, Crowe SB (2019) Producing inserts for a commercial motion phantom using 3D printing. Australas Phys Eng Sci Med 42(1):377–378

Markovic A (2017) 3d printed bolus with flexible materials: treatment planning accuracy and practical aspects. Int J Radiat Onco Biol Phys 99(2):E696

Alssabbagh M, Tajuddin AA, Abdulmanap M, Zainon R (2017) Evaluation of 3D printing materials for fabrication of a novel multifunctional 3D thyroid phantom for medical dosimetry and image quality. Radiat Phys Chem 135:106–112

Van der Walt M, Crabtree T, Albantow C (2019) PLA as a suitable 3D printing thermoplastic for use in external beam radiotherapy. Australas Phys Eng Sci Med 42(4):1165–1176

Yea JW, Park JW, Kim SK et al (2017) Feasibility of a 3D printed anthropomorphic patient specific head phantom for patient specific quality assurance of intensity modulated radiotherapy. PLoS ONE 12(7):e0181560

Okkalidis N (2018) A novel 3D printing method for accurate anatomy replication in patient-specific phantoms. Med Phys 45(10):4600–4606

Kadoya N, Miyasaka Y, Nakajima Y et al (2017) Evaluation of deformable image registration between external beam radiotherapy and HDR brachytherapy for cervic al cancer with a 3D printed deformable pelvis phantom. Med Phys 44(4):1445–1455

Craft DF, Howell RM (2017) Preparation and fabrication of a full scale, sagittal sliced, 3D printed, patient specific radiotherapy phantom. J Appl Clin Med Phys 18(5):285–292

Mayer R, Liacouras P, Thomas A et al (2015) 3D printer generated thorax phantom with mobile tumor for radiation dosimetry. Rev Sci Instrum 86(7):074301

Hazelaar C, van Eijnatten M, Dahele M et al (2018) Using 3D printing techniques to create an anthropomorphic thorax phantom for medical imaging purposes. Med Phys 45(1):92–100

Pallotta S, Calusi S, Foggi L (2018) ADAM: A breathing phantom for lung SBRT quality assurance. Phys Medica 49:147–155

Oh D, Hong C-S, Ju SG (2017) Development of patient specific phantoms for verification of stereotactic body radiation therapy planning in patients with metallic screw fixation. Sci Rep 7:40922

Solomon J, Ba A, Bochud F, Samei E (2016) Comparison of low-contrast detectability between two CT reconstruction algorithms using voxel-based 3D printed textured phantoms. Med Phys 43(12):6497–6506

Randolph SA (2018) 3D printing: what are the hazards? Workplace Health Saf 66(3):164–164

Wojtyła S, Klama P, Baran T (2017) Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon. J Occup Environ Hygiene 14(6):D80–D85

Azimi P, Zhao D, Pouzet C et al (2016) Emissions of ultrafine particles and volatile organic compounds from commercially available desktop three-dimensional printers with multiple filaments. Environ Sci Tech 50(3):1260–1268

Fedorov A, Beichel R, Kalpathy-Cramer J et al (2012) 3D slicer as an image computing platform for the quantitative imaging network. Magn Reson Imaging 30(9):1323–1341

Clark K, Vendt B, Smith K et al (2013) The cancer imaging archive (TCIA): maintaining and operating a public information repository. J Digital Imaging 26(6):1045–1057

Aerts HJWL, Velazquez ER, Leijenaar RTH et al (2014) Decoding tumour phenotype by noninvasive imaging using a quantitative radiomics approach. Nat Commun 5:4006. https://doi.org/10.1038/ncomms5006

Aerts HJWL, Velazquez ER, Leijenaar RTH et al (2015) Data from NSCLC-radiomics-genomics. Cancer Imaging Arch. https://doi.org/10.7937/K9/TCIA.2015.L4FRET6Z

Alsoufi MS, Elsayed AE (2017) Warping deformation of desktop 3D printed parts manufactured by open source fused deposition modeling (FDM) system. Int J Mech Mechatronics Eng 17(4):7–16

Charles PH, Kairn T, Crowe SB (2020) Clinical quality assurance of 3D printed patient specific radiotherapy devices. Phys Eng Sci Med 43(1):436–437. https://doi.org/10.1007/s13246-019-00826-6. Correction to: EPSM 2019, Engineering and Physical Sciences in Medicine. Phys Eng Sci Med 43(1):463 (2020). https://doi.org/10.1007/s13246-020-00846-7

Sasaki DK, McGeachy P, Aviles JEA et al (2019) A modern mold room: meshing 3D surface scanning, digital design, and 3D printing with bolus fabrication. J Appl Clin Med Phys 20(9):78–85

Cignoni P, Callieri M, Corsini M et al (2008) MeshLab: an Open-Source Mesh Processing Tool. Sixth Eurographics Italian Chapter Conference, pp 129–136

Cignoni P, Rocchini C, Scopigno R (1998) Metro: measuring error on simplified surfaces. Comput Graphics Forum 17(2):167–174

Van Dyk J, Keane TJ, Rider WD (1982) Lung density as measured by computerized tomography: implications for radiotherapy. Int J Radiat Onco Biol Phys 8(8):1363–1372

International Commission on Radiation Units and Measurements (1989) ICRU Report 44 Tissue Substitutes in Radiation Dosimetry and Measurement. ICRU publications, Bethseda

Gammex, CT Electron Density Phantom https://www.sunnuclear.com/documents/ datasheets/gammex/ct_electron_density_phantom.pdf Accessed January 2020

Kairn T, Brown G, Choma K (2020) Design and use of a modular system of 3D printed blocks to model heart and lung tissue in a breast radiotherapy phantom. Phys Eng Sci Med 43(1):455–456. https://doi.org/10.1007/s13246-019-00826-6

Tino R, Leary M, Yeo A, Brandt M, Kron T (2019) Gyroid structures for 3D-printed heterogeneous radiotherapy phantoms. Phys Med Biol 64: 21NT05

Ceh J, Youd T, Mastrovich Z et al (2017) Bismuth infusion of ABS enables additive manufacturing of complex radiological phantoms and shielding equipment. Sensors 17(3):459

Hamedani BA, Melvin A, Vaheesan K et al (2018) Three-dimensional printing CT-derived objects with controllable radiopacity. J Appl Clin Med Phys 19(2):317–328

Crowe S, Kairn T, Sylvander S, Lancaster C (2020) Case study: the disappearing skull. Phys Eng Sci Med 43(1):335. https://doi.org/10.1007/s13246-019-00826-6