Quality Assessment of 3D Printed Surfaces Using Combined Metrics Based on Mutual Structural Similarity Approach Correlated with Subjective Aesthetic Evaluation

Stephens, 2013, Ultrafine particle emissions from desktop 3D printers, Atmos. Environ., 79, 334, 10.1016/j.atmosenv.2013.06.050

Azimi, 2016, Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments, Environ. Sci. Technol., 50, 1260, 10.1021/acs.est.5b04983

Fastowicz, J., Grudziński, M., Tecław, M., and Okarma, K. (2019). Objective 3D Printed Surface Quality Assessment Based on Entropy of Depth Maps. Entropy, 21.

Okarma, 2020, Improved quality assessment of colour surfaces for additive manufacturing based on image entropy, Pattern Anal. Appl., 23, 1035, 10.1007/s10044-020-00865-w

Cheng, 2008, Vision-Based Online Process Control in Manufacturing Applications, IEEE Trans. Autom. Sci. Eng., 5, 140, 10.1109/TASE.2007.912058

Delli, 2018, Automated Process Monitoring in 3D Printing Using Supervised Machine Learning, Procedia Manuf., 26, 865, 10.1016/j.promfg.2018.07.111

Szkilnyk, 2011, Vision Based Fault Detection of Automated Assembly Equipment, Proceedings of the ASME/IEEE International Conference on Mechatronic and Embedded Systems and Applications, Parts A and B, Volume 3, 691

Chauhan, 2015, A Comparative Study of Machine Vision Based Methods for Fault Detection in an Automated Assembly Machine, Procedia Manuf., 1, 416, 10.1016/j.promfg.2015.09.051

Chauhan, 2017, Fault detection and classification in automated assembly machines using machine vision, Int. J. Adv. Manuf. Technol., 90, 2491, 10.1007/s00170-016-9581-5

Fang, 1998, Online defect detection in layered manufacturing using process signature, Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, Volume 5, 4373

Fang, 2003, Signature analysis and defect detection in layered manufacturing of ceramic sensors and actuators, Mach. Vis. Appl., 15, 63, 10.1007/s00138-002-0074-1

Gardner, 2018, In situ process monitoring in selective laser sintering using optical coherence tomography, Opt. Eng., 57, 1, 10.1117/1.OE.57.4.041407

Lane, 2016, Thermographic measurements of the commercial laser powder bed fusion process at NIST, Rapid Prototyp. J., 22, 778, 10.1108/RPJ-11-2015-0161

Busch, 2014, Optical Properties of 3D Printable Plastics in the THz Regime and their Application for 3D Printed THz Optics, J. Infrared Millim. Terahertz Waves, 35, 993, 10.1007/s10762-014-0113-9

Harding, 2017, Physical security and cyber security issues and human error prevention for 3D printed objects: Detecting the use of an incorrect printing material, Dimensional Optical Metrology and Inspection for Practical Applications VI, Proceedings of the SPIE Commercial + Scientific Sensing and Imaging, Anaheim, CA, USA, 9–13 April 2017, Volume 10220, 90

Alam, M.S. (2017). Identifying positioning-based attacks against 3D printed objects and the 3D printing process. Pattern Recognition and Tracking XXVIII, Proceedings of the SPIE Defense + Security, Anaheim, CA, USA, 16 June 2017, SPIE.

Zeltmann, 2016, Manufacturing and Security Challenges in 3D Printing, JOM, 68, 1872, 10.1007/s11837-016-1937-7

Holzmond, 2017, In situ real time defect detection of 3D printed parts, Addit. Manuf., 17, 135

Scime, 2018, Anomaly detection and classification in a laser powder bed additive manufacturing process using a trained computer vision algorithm, Addit. Manuf., 19, 114

Tourloukis, G., Stoyanov, S., Tilford, T., and Bailey, C. (2015, January 6–10). Data driven approach to quality assessment of 3D printed electronic products. Proceedings of the 38th International Spring Seminar on Electronics Technology (ISSE), Eger, Hungary.

Makagonov, N.G., Blinova, E.M., and Bezukladnikov, I.I. (2017, January 1–3). Development of visual inspection systems for 3D printing. Proceedings of the 2017 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus), St. Petersburg, Russia.

Fok, 2019, An ACO-Based Tool-Path Optimizer for 3-D Printing Applications, IEEE Trans. Ind. Inform., 15, 2277, 10.1109/TII.2018.2889740

Ramos, 2015, MultiFab: A Machine Vision Assisted Platform for Multi-material 3D Printing, ACM Trans. Graph., 34, 1

Straub, 2015, Initial Work on the Characterization of Additive Manufacturing (3D Printing) Using Software Image Analysis, Machines, 3, 55, 10.3390/machines3020055

Alam, M.S. (2017). An approach to detecting deliberately introduced defects and micro-defects in 3D printed objects. Pattern Recognition and Tracking XXVIII, Proceedings of the SPIE Defense + Security, Anaheim, CA, USA, 16 June 2017, SPIE.

Bi, 2020, Automatic surface inspection for S-PVC using a composite vision-based method, Appl. Opt., 59, 1008, 10.1364/AO.378773

Zhai, G., and Min, X. (2020). Perceptual image quality assessment: A survey. Sci. China Inf. Sci., 63.

Wang, 2002, A universal image quality index, IEEE Signal Process. Lett., 9, 81, 10.1109/97.995823

Wang, 2004, Image Quality Assessment: From Error Visibility to Structural Similarity, IEEE Trans. Image Process., 13, 600, 10.1109/TIP.2003.819861

Wang, Z., Simoncelli, E., and Bovik, A. (2003, January 9–12). Multiscale structural similarity for image quality assessment. Proceedings of the 37th Asilomar Conference on Signals, Systems and Computers, Pacific Grove, CA, USA.

Aja-Fernandez, S., Estepar, R.S.J., Alberola-Lopez, C., and Westin, C.F. (September, January 30). Image Quality Assessment based on Local Variance. Proceedings of the 2006 International Conference of the IEEE Engineering in Medicine and Biology Society, New York, NY, USA.

Sampat, 2009, Complex Wavelet Structural Similarity: A New Image Similarity Index, IEEE Trans. Image Process., 18, 2385, 10.1109/TIP.2009.2025923

Wang, 2011, Information Content Weighting for Perceptual Image Quality Assessment, IEEE Trans. Image Process., 20, 1185, 10.1109/TIP.2010.2092435

Zhang, 2011, FSIM: A Feature Similarity Index for Image Quality Assessment, IEEE Trans. Image Process., 20, 2378, 10.1109/TIP.2011.2109730

Liu, 2012, Image Quality Assessment Based on Gradient Similarity, IEEE Trans. Image Process., 21, 1500, 10.1109/TIP.2011.2175935

Zhang, L., and Li, H. (October, January 30). SR-SIM: A fast and high performance IQA index based on spectral residual. Proceedings of the 2012 19th IEEE International Conference on Image Processing (ICIP), Orlando, FL, USA.

Zhang, 2013, Edge Strength Similarity for Image Quality Assessment, IEEE Signal Process. Lett., 20, 319, 10.1109/LSP.2013.2244081

Balanov, A., Schwartz, A., Moshe, Y., and Peleg, N. (2015, January 27–30). Image quality assessment based on DCT subband similarity. Proceedings of the 2015 IEEE International Conference on Image Processing (ICIP), Quebec City, QC, Canada.

Wang, 2016, Multiscale contrast similarity deviation: An effective and efficient index for perceptual image quality assessment, Signal Process. Image Commun., 45, 1, 10.1016/j.image.2016.04.005

Gu, 2016, Analysis of Distortion Distribution for Pooling in Image Quality Prediction, IEEE Trans. Broadcast., 62, 446, 10.1109/TBC.2015.2511624

Ponomarenko, M., Egiazarian, K., Lukin, V., and Abramova, V. (2018, January 2–5). Structural Similarity Index with Predictability of Image Blocks. Proceedings of the 2018 IEEE 17th International Conference on Mathematical Methods in Electromagnetic Theory (MMET), Kiev, Ukraine.

Jia, 2018, Contrast and Visual Saliency Similarity-Induced Index for Assessing Image Quality, IEEE Access, 6, 65885, 10.1109/ACCESS.2018.2878739

Yang, 2018, RVSIM: A feature similarity method for full-reference image quality assessment, EURASIP J. Image Video Process., 2018, 6, 10.1186/s13640-018-0246-1

Ieremeiev, O., Lukin, V., Okarma, K., and Egiazarian, K. (2020). Full-Reference Quality Metric Based on Neural Network to Assess the Visual Quality of Remote Sensing Images. Remote Sens., 12.

Rutkowski, 2010, Combined Full-Reference Image Quality Metric Linearly Correlated with Subjective Assessment, Artificial Intelligence and Soft Computing, Proceedings of the 10th International Conference Proceedings, ICAISC 2010, Zakopane, Poland, 13–17 June 2010, Volume 6113, 539

Sheikh, 2006, Image information and visual quality, IEEE Trans. Image Process., 15, 430, 10.1109/TIP.2005.859378

Mansouri, 2009, Image quality assessment using the singular value decomposition theorem, Opt. Rev., 16, 49, 10.1007/s10043-009-0010-y

Okarma, 2012, Combined image similarity index, Opt. Rev., 19, 349, 10.1007/s10043-012-0055-1

Athar, 2019, A Comprehensive Performance Evaluation of Image Quality Assessment Algorithms, IEEE Access, 7, 140030, 10.1109/ACCESS.2019.2943319

Oszust, 2016, A Regression-Based Family of Measures for Full-Reference Image Quality Assessment, Meas. Sci. Rev., 16, 316, 10.1515/msr-2016-0040

Liu, 2013, Image Quality Assessment Using Multi-Method Fusion, IEEE Trans. Image Process., 22, 1793, 10.1109/TIP.2012.2236343

Rogowitz, B.E., Pappas, T.N., and de Ridder, H. (2015). Combining full-reference image visual quality metrics by neural network. Human Vision and Electronic Imaging XX, Proceedings of the SPIE/IS&T Electronic Imaging, San Francisco, CA, USA, 10–11 February 2015, SPIE.

Oszust, M. (2016). Full-Reference Image Quality Assessment with Linear Combination of Genetically Selected Quality Measures. PLoS ONE, 11.

Chmielewski, 2016, Application of Structural Similarity Based Metrics for Quality Assessment of 3D Prints, Computer Vision and Graphics, Proceedings of the International Conference, ICCVG 2016, Warsaw, Poland, 19–21 September 2016, Volume 9972, 244

Okarma, 2019, Adaptation of Full-Reference Image Quality Assessment Methods for Automatic Visual Evaluation of the Surface Quality of 3D Prints, Elektron. Elektrotechnika, 25, 57, 10.5755/j01.eie.25.5.24357

Fastowicz, J., and Okarma, K. (2018, January 9–12). Fast quality assessment of 3D printed surfaces based on structural similarity of image regions. Proceedings of the 2018 International Interdisciplinary PhD Workshop (IIPhDW), Świnoujście, Poland.

International Telecommunication Union (2011). Recommendation ITU-R BT.601-7—Studio Encoding Parameters of Digital Television for Standard 4:3 and Wide-Screen 16:9 Aspect Ratios, International Telecommunication Union.

Krzhizhanovskaya, 2020, Combined Metrics for Quality Assessment of 3D Printed Surfaces for Aesthetic Purposes: Towards Higher Accordance with Subjective Evaluations, Computational Science—ICCS 2020, Proceedings of the 20th International Conference Proceedings, Amsterdam, The Netherlands, 3–5 June 2020, Volume 12143, 326

Kim, 2018, A review on quality control in additive manufacturing, Rapid Prototyp. J., 24, 645, 10.1108/RPJ-03-2017-0048

Wu, 2018, Quality control issues in 3D-printing manufacturing: A review, Rapid Prototyp. J., 24, 607, 10.1108/RPJ-02-2017-0031